aboutsummaryrefslogtreecommitdiffstats
path: root/arch (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2007-09-14[POWERPC] MPC832x_RDB: Update dts to use SPI1 in QE, register mmc_spi stubAnton Vorontsov2-1/+47
Enabled using SPI controller on the MPC832x RDB board. We currently use a modalias of "spidev" as a place holder (replace with "mmc_spie") until the mmc_spi driver support is merged in. This gets us the ability to test SPI until then. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] fsl_soc: add support for fsl_spiAnton Vorontsov2-0/+94
Add helper function to setup SPI bus/device information Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] 52xx: Fix mpc52xx_uart_of_assign to use correct indexJohn Rigby1-1/+1
Use idx as index into mpc52xx_uart_nodes instead of i Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] 86xx: Fix definition of global-utilites structureTimur Tabi1-105/+46
The current definition of struct ccsr_guts in immap_86xx.h was for 85xx. This patch fixes that and replaces the vague integer types with sized types of the correct endianness. The unused struct ccsr_pci is also deleted. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] add clrsetbits macrosTimur Tabi1-0/+23
This patch adds the clrsetbits_xxx() macros, which are used to set and clear multiple bits in a single read-modify-write operation. Specify the bits to clear in the 'clear' parameter and the bits to set in the 'set' parameter. These macros can also be used to set a multiple-bit bit pattern using a mask, by specifying the mask in the 'clear' parameter and the new bit pattern in the 'set' parameter. There are big-endian and little-endian versions for 8, 16, 32, and 64 bits. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] QE: extern par_io_config_pin and par_io_data_set funcsAnton Vorontsov1-0/+3
This is needed to configure and control QE pario pins from the kernel. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[PPC] Add clrbits8 and setbits8.Scott Wood1-0/+3
These I/O accessors will be used in code under drivers/, which is expected to still work in arch/ppc. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] Fix modpost warnings from head*.S on ppc32Kumar Gala7-28/+28
We get warnings like the following from the various ppc32 head*.S files: WARNING: vmlinux.o(.text+0x358): Section mismatch: reference to .init.text:early_init (between 'skpinv' and 'interrupt_base') WARNING: vmlinux.o(.text+0x380): Section mismatch: reference to .init.text:machine_init (between 'skpinv' and 'interrupt_base') WARNING: vmlinux.o(.text+0x384): Section mismatch: reference to .init.text:MMU_init (between 'skpinv' and 'interrupt_base') WARNING: vmlinux.o(.text+0x3aa): Section mismatch: reference to .init.text:start_kernel (between 'skpinv' and 'interrupt_base') WARNING: vmlinux.o(.text+0x3ae): Section mismatch: reference to .init.text:start_kernel (between 'skpinv' and 'interrupt_base') Added a .text.head section simliar to what other architectures do since modpost already excludes this from its warnings. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] Add cpu feature for SPE handlingKumar Gala5-28/+46
Make it so that SPE support can be determined at runtime. This is similiar to how we handle AltiVec. This allows us to have SPE support built in and work on processors with and without SPE. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] 83xx: Removed PCI exclude of PHBKumar Gala8-19/+0
Now that the generic code doesn't assign resources for Freescale PHBs we dont have to explicitly exclude it. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] Move PCI nodes to be sibilings with SOC nodesKumar Gala16-1285/+1323
Updated the device trees to have the PCI nodes be at the same level as the SOC node. This is to make it so that the SOC nodes children address space is just on chip registers and not other bus memory as well. Also, for PCIe nodes added a P2P bridge to handle the virtual P2P bridge that exists in the PHB. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] DTS cleanupKumar Gala25-99/+4
Removed the following cruft from .dts files: * 32-bit in cpu node -- doesn't exist in any spec and not used by kernel * removed built-in (chrp legacy) * Removed #interrupt-cells in places they don't need to be set * Fixed ranges on lite5200* * Removed clock-frequency from i8259 pic node, not sure where this came from * Removed big-endian from i8259 pic nodes, this was just bogus Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] 85xx: Add basic Uniprocessor MPC8572 DS portKumar Gala5-0/+1935
Added basic board port for MPC8572 DS reference platform that is similiar to the MPC8544/33 DS reference platform in uniprocessor mode. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] Handle alignment faults on SPE load/store instructionsKumar Gala1-0/+250
This adds code to handle alignment traps generated by the following SPE (signal processing engine) load/store instructions, by emulating the instruction in the kernel (as is done for other instructions that generate alignment traps): evldd[x] Vector Load Double Word into Double Word [Indexed] evldw[x] Vector Load Double into Two Words [Indexed] evldh[x] Vector Load Double into Four Half Words [Indexed] evlhhesplat[x] Vector Load Half Word into Half Words Even and Splat [Indexed] evlhhousplat[x] Vector Load Half Word into Half Word Odd Unsigned and Splat [Indexed] evlhhossplat[x] Vector Load Half Word into Half Word Odd Signed and Splat [Indexed] evlwhe[x] Vector Load Word into Two Half Words Even [Indexed] evlwhou[x] Vector Load Word into Two Half Words Odd Unsigned (zero-extended) [Indexed] evlwhos[x] Vector Load Word into Two Half Words Odd Signed (with sign extension) [Indexed] evlwwsplat[x] Vector Load Word into Word and Splat [Indexed] evlwhsplat[x] Vector Load Word into Two Half Words and Splat [Indexed] evstdd[x] Vector Store Double of Double [Indexed] evstdw[x] Vector Store Double of Two Words [Indexed] evstdh[x] Vector Store Double of Four Half Words [Indexed] evstwhe[x] Vector Store Word of Two Half Words from Even [Indexed] evstwho[x] Vector Store Word of Two Half Words from Odd [Indexed] evstwwe[x] Vector Store Word of Word from Even [Indexed] evstwwo[x] Vector Store Word of Word from Odd [Indexed] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] fsl_soc.c cleanupScott Wood1-10/+17
1. Update the way get_brgfreq() finds things in the device tree. It now uses names that are less namespace polluting. The old names are supported until all boards are converted. 2. "size" is changed from unsigned int to int, to match what of_get_property() expects. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] 85xx: Remove unnecessary loops_per_jiffy initialization code.Jon Loeliger3-37/+0
Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] 86xx: Remove unnecessary loops_per_jiffy initialization code.Jon Loeliger1-12/+2
Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] linkstation updatesGuennadi Liakhovetski4-5/+18
1. Fix RTC type - it is a rs5c372a, not rs5c372b 2. Configure both UART interrupts edge-triggered 3. Add a license header to ls_uart.c 4. Check for running on linkstation in a late_initcall() function. Needed for multiplatform builds, even though linkstation doesn't support them yet 5. Remove unneeded #include from linkstation.c Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-13[POWERPC] 85xx: Clean up from 85xx_ds renameKumar Gala1-14/+22
Renamed functions in 85xx_ds from 8544 to 85xx. Kept an unique machine def/probe for the MPC8544 DS board to handle some subtle differences between the future board based on the DS platform. Also fixed building w/o CONFIG_PCI and minor whitespace fixes. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-13[POWERPC] 85xx: Renamed mpc8544_ds.c to mpc85xx_ds.cKumar Gala4-6/+6
Renamed the mpc8544_ds.c board code to mpc85xx_ds.c to make it more generic in prep for other boards based on the same platform. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-13ucc_geth: kill unused includeKumar Gala1-1/+0
The ucc_geth_mii code is based on the gianfar_mii code that use to include ocp.h. ucc never need this and it causes issues when we want to kill arch/ppc includes from arch/powerpc. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] PS3: Enhance storage probe debug outputGeoff Levand1-8/+16
Add some more info to the PS3 storage probe debug output. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] PS3: Add new LV1 error codesGeert Uytterhoeven1-0/+9
Add new error codes that may be returned by the LV1 hypervisor Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] PS3: Fix CONFIG_SMP=n, CONFIG_KEXEC=y buildJeremy Kerr1-0/+4
Currently, the ps3 kernel fails to build without smp but with kexec, as ps3_kexec_cpu_down needs ps3_smp_cleanup_cpu, which isn't defined on UP kernels. This change adds an empty ps3_smp_cleanup_cpu for UP kernels. Booted on ps3. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] Add workaround for MPICs with broken register readsOlof Johansson4-2/+27
Some versions of PWRficient 1682M have an interrupt controller in which the first register in each pair for interrupt sources doesn't always read with the right polarity/sense values. To work around this, keep a software copy of the register instead. Since it's not modified from the mpic itself, it's a feasible solution. Still, keep it under a config option to avoid wasting memory on other platforms. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] Document and implement an improved flash device binding for powerpcDavid Gibson3-110/+251
This replaces the binding for flash chips in booting-without-of.txt with an clarified and improved version. It also makes drivers/mtd/maps/physmap_of.c recognize this new binding. Finally it revises the Ebony device tree source to use the new binding as an example. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] setup_64.c and prom.c comment cleanupLinas Vepstas2-6/+8
Grammatical corrections to comments. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] prom.c whitespace cleanupLinas Vepstas1-6/+6
Whitespace cleanup: badly indented lines. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] prom_init whitespace cleanup, typo fixLinas Vepstas1-6/+6
Whitespace cleanup: badly indented lines. Typo in comment. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] Check _PAGE_RW and _PAGE_PRESENT on kernel addressesScott Wood1-6/+6
Previously, the TLB miss handlers assumed that pages above KERNELBASE are always present and read/write. This assumption is false in the case of CONFIG_DEBUG_PAGEALLOC. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] bootwrapper: Only print MAC addresses when the node is actually presentScott Wood1-4/+6
Some firmwares (such as PlanetCore) only provide a base MAC address, and expect the kernel to set certain bits to generate the addresses for the other ports. As such, MAC addresses are generated that may not correspond to actual hardware. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] bootwrapper: Add get_path()Scott Wood4-0/+75
This will be used by the PlanetCore firmware support to construct a linux,stdout-path from the serial node that it finds. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] bootwrapper: Add strtoull()Scott Wood3-1/+52
This will be needed by PlanetCore firmware support. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] bootwrapper: flatdevtree fixesScott Wood3-27/+23
1. ft_create_node was returning the internal pointer rather than a phandle. 2. ft_find_device_rel was treating a "top" phandle of NULL as an error, rather than as the root of the tree. The old, absolute ft_find_device is removed, and the relative version is renamed to ft_find_device(). Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] Remove warning in arch/powerpc/kernel/sysfs.cOlof Johansson1-1/+3
Fixes: arch/powerpc/kernel/sysfs.c: In function 'cpu_add_sysdev_attr_group': arch/powerpc/kernel/sysfs.c:388: warning: ignoring return value of 'sysfs_create_group', declared with attribute warn_unused_result Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] Move lowlevel runlatch calls under cpu feature controlOlof Johansson2-0/+4
There's no need to call the runlatch on functions on processors that don't implement them (CPU_FTR_CTRL). Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] Remove unused platform_machine_check()Olof Johansson1-15/+0
Remove leftover cruft from ARCH=ppc. There are no users of platform_machine_check() in ARCH=powerpc, and none should be added (they should use ppc_md.machine_check_handler instead). Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] pasemi: Move pasemi_idle_init() to late_initcall()Olof Johansson3-5/+7
Move pasemi_idle_init() to be a late_initcall instead of being called from setup_arch(). This way the cpufreq driver has a chance to initialize and save away the boot time astate before we go to idle for the first time. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] pasemi: Print more information at machine checkOlof Johansson1-4/+106
Add printout of some SoC error status registers, and dump the SLB contents for those machine check events where it makes sense. Since we can't go about and ioremap registers at machine check time, and we generally want to do as little as possible to print out the information, pre-build a table of the registers to dump and their address in the common PCI config space range. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] pasemi: Export more SPRs to sysfs when CONFIG_DEBUG_KERNEL=yOlof Johansson2-11/+97
Export some of the implementation-specific registers via sysfs. Useful when debugging, etc. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] pasemi: Add workaround for erratum 5945Olof Johansson1-2/+60
Erratum 5945 causes some of the registers on the PCIe root ports to not read correctly. Do a small dance to avoid this: Write an unused register, read the value and write it back. Thankfully this is not in a hot code path. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] pasemi: Add pasemi_pci_getcfgaddr()Olof Johansson2-0/+11
Add pasemi_pci_getcfgaddr(), to get the remapped address of a specific config register for a PCI device. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] Export new __io{re,un}map_at() symbolsOlof Johansson1-0/+2
Export new __io{re,un}map_at() symbols so modules can use them. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] Export virq mapping via debugfsMichael Ellerman2-0/+73
This adds a debugfs file "powerpc/virq_mapping", which shows the virtual to real mapping of irq numbers. Enable it with CONFIG_VIRQ_DEBUG. Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Chen Gong <G.Chen@freescale.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] Initialise hwirq for legacy irqsMichael Ellerman1-1/+1
Although no one uses the hwirq value for legacy irqs at the moment, we should really setup the correct value in the irq_map. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] Provide a default irq_host match, which matches on an exact of_nodeMichael Ellerman11-62/+9
The most common match semantic is an exact match based on the device node. So provide a default implementation that does this, and hook it up if no match routine is specified. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] Invert null match behaviour for irq_hostsMichael Ellerman4-1/+22
Currently if you don't specify a match callback for your irq_host it's assumed you match everything. This is a kind of opt-out approach, and turns out to be the exception rather than the rule. So change the semantics to be opt-in, ie. you don't match anything unless you provide a match callback. This in itself isn't very useful, but will allow us to provide a default match implementation in a subsequent patch. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] Add an optional device_node pointer to the irq_hostMichael Ellerman26-109/+76
The majority of irq_host implementations (3 out of 4) are associated with a device_node, and need to stash it somewhere. Rather than having it somewhere different for each host, add an optional device_node pointer to the irq_host structure. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] Move bootwrapper's strchr() and strncmp() from .h to string.SDavid Gibson3-20/+26
Currently the bootwrapper has implementations of strchr() and strncmp(), but they're inlines in flatdevtree_env.h, rather than in string.S with all the rest of the string functions. This moves them to string.S. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] IOMMU virtual merge is no longer experimentalLinas Vepstas1-5/+6
Per conversations with BenH, IOMMU virtual merging should no longer be considered to be an "experimental" feature. In particular, CONFIG_VMERGE has been set to "y" in the defconfigs for quite a while. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> ---- arch/powerpc/Kconfig | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) Signed-off-by: Paul Mackerras <paulus@samba.org>