aboutsummaryrefslogtreecommitdiffstats
path: root/arch (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-04-24rhashtable: don't attempt to grow when at max_sizeJohannes Berg1-1/+2
The conversion of mac80211's station table to rhashtable had a bug that I found by accident in code review, that hadn't been found as rhashtable apparently managed to have a maximum hash chain length of one (!) in all our testing. In order to test the bug and verify the fix I set my rhashtable's max_size very low (4) in order to force getting hash collisions. At that point, rhashtable WARNed in rhashtable_insert_rehash() but didn't actually reject the hash table insertion. This caused it to lose insertions - my master list of stations would have 9 entries, but the rhashtable only had 5. This may warrant a deeper look, but that WARN_ON() just shouldn't happen. Fix this by not returning true from rht_grow_above_100() when the rhashtable's max_size has been reached - in this case the user is explicitly configuring it to be at most that big, so even if it's now above 100% it shouldn't attempt to resize. This fixes the "lost insertion" issue and consequently allows my code to display its error (and verify my fix for it.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-24bgmac: fix requests for extra polling calls from NAPIRafał Miłecki1-1/+1
After d75b1ade567f ("net: less interrupt masking in NAPI") polling function has to return whole budget when it wants NAPI to call it again. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Felix Fietkau <nbd@openwrt.org> Fixes: eb64e2923a886 ("bgmac: leave interrupts disabled as long as there is work to do") Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-24tcp: avoid looping in tcp_send_fin()Eric Dumazet1-21/+29
Presence of an unbound loop in tcp_send_fin() had always been hard to explain when analyzing crash dumps involving gigantic dying processes with millions of sockets. Lets try a different strategy : In case of memory pressure, try to add the FIN flag to last packet in write queue, even if packet was already sent. TCP stack will be able to deliver this FIN after a timeout event. Note that this FIN being delivered by a retransmit, it also carries a Push flag given our current implementation. By checking sk_under_memory_pressure(), we anticipate that cooking many FIN packets might deplete tcp memory. In the case we could not allocate a packet, even with __GFP_WAIT allocation, then not sending a FIN seems quite reasonable if it allows to get rid of this socket, free memory, and not block the process from eventually doing other useful work. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-23ethernet: myri10ge: use arch_phys_wc_add()Luis R. Rodriguez1-29/+9
This driver already uses ioremap_wc() on the same range so when write-combining is available that will be used instead. Cc: Hyong-Youb Kim <hykim@myri.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: netdev@vger.kernel.org Cc: Juergen Gross <jgross@suse.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-23can: CAN_GRCAN should depend on HAS_DMAGeert Uytterhoeven1-1/+1
If NO_DMA=y: drivers/built-in.o: In function `grcan_free_dma_buffers': grcan.c:(.text+0x2d7716): undefined reference to `dma_free_coherent' drivers/built-in.o: In function `grcan_allocate_dma_buffers': grcan.c:(.text+0x2d779c): undefined reference to `dma_alloc_coherent' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-23ethernet: arc: ARC_EMAC and EMAC_ROCKCHIP should depend on HAS_DMAGeert Uytterhoeven1-3/+2
If NO_DMA=y: drivers/built-in.o: In function `arc_emac_tx_clean': emac_main.c:(.text+0x2decde): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `arc_emac_rx': emac_main.c:(.text+0x2dee1c): undefined reference to `dma_unmap_single' emac_main.c:(.text+0x2dee72): undefined reference to `dma_map_single' emac_main.c:(.text+0x2dee7e): undefined reference to `dma_mapping_error' drivers/built-in.o: In function `arc_emac_probe': (.text+0x2df2ee): undefined reference to `dmam_alloc_coherent' drivers/built-in.o: In function `arc_emac_open': emac_main.c:(.text+0x2df6d8): undefined reference to `dma_map_single' emac_main.c:(.text+0x2df6e4): undefined reference to `dma_mapping_error' drivers/built-in.o: In function `arc_emac_tx': emac_main.c:(.text+0x2df9e4): undefined reference to `dma_map_single' emac_main.c:(.text+0x2df9f0): undefined reference to `dma_mapping_error' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-23ethernet: amd: AMD_XGBE should depend on HAS_DMAGeert Uytterhoeven1-1/+1
If NO_DMA=y: drivers/built-in.o: In function `xgbe_probe': xgbe-main.c:(.text+0x2def0a): undefined reference to `dma_set_mask' xgbe-main.c:(.text+0x2def20): undefined reference to `dma_supported' drivers/built-in.o: In function `xgbe_rx_poll': xgbe-drv.c:(.text+0x2e0320): undefined reference to `dma_sync_single_for_cpu' xgbe-drv.c:(.text+0x2e035e): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `xgbe_unmap_rdata': xgbe-desc.c:(.text+0x2e5fe4): undefined reference to `dma_unmap_page' xgbe-desc.c:(.text+0x2e5ffa): undefined reference to `dma_unmap_single' xgbe-desc.c:(.text+0x2e604a): undefined reference to `dma_unmap_page' xgbe-desc.c:(.text+0x2e6084): undefined reference to `dma_unmap_page' drivers/built-in.o: In function `xgbe_alloc_pages': xgbe-desc.c:(.text+0x2e6156): undefined reference to `dma_map_page' xgbe-desc.c:(.text+0x2e6164): undefined reference to `dma_mapping_error' drivers/built-in.o: In function `xgbe_free_ring': xgbe-desc.c:(.text+0x2e63d4): undefined reference to `dma_unmap_page' xgbe-desc.c:(.text+0x2e640e): undefined reference to `dma_unmap_page' xgbe-desc.c:(.text+0x2e644a): undefined reference to `dma_free_coherent' drivers/built-in.o: In function `xgbe_init_ring': xgbe-desc.c:(.text+0x2e64d4): undefined reference to `dma_alloc_coherent' drivers/built-in.o: In function `xgbe_map_tx_skb': xgbe-desc.c:(.text+0x2e6628): undefined reference to `dma_map_single' xgbe-desc.c:(.text+0x2e6638): undefined reference to `dma_mapping_error' xgbe-desc.c:(.text+0x2e66b2): undefined reference to `dma_map_single' xgbe-desc.c:(.text+0x2e66c2): undefined reference to `dma_mapping_error' xgbe-desc.c:(.text+0x2e6762): undefined reference to `dma_map_page' xgbe-desc.c:(.text+0x2e6772): undefined reference to `dma_mapping_error' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-23net: unix: garbage: fixed several comment and whitespace style issuesJason Eastman1-42/+28
fixed several comment and whitespace style issues Signed-off-by: Jason Eastman <eastman.jason.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-23tipc: fix node refcount issueErik Hugne1-1/+0
When link statistics is dumped over netlink, we iterate over the list of peer nodes and append each links statistics to the netlink msg. In the case where the dump is resumed after filling up a nlmsg, the node refcnt is decremented without having been incremented previously which may cause the node reference to be freed. When this happens, the following info/stacktrace will be generated, followed by a crash or undefined behavior. We fix this by removing the erroneous call to tipc_node_put inside the loop that iterates over nodes. [ 384.312303] INFO: trying to register non-static key. [ 384.313110] the code is fine but needs lockdep annotation. [ 384.313290] turning off the locking correctness validator. [ 384.313290] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.0.0+ #13 [ 384.313290] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 384.313290] ffff88003c6d0290 ffff88003cc03ca8 ffffffff8170adf1 0000000000000007 [ 384.313290] ffffffff82728730 ffff88003cc03d38 ffffffff810a6a6d 00000000001d7200 [ 384.313290] ffff88003c6d0ab0 ffff88003cc03ce8 0000000000000285 0000000000000001 [ 384.313290] Call Trace: [ 384.313290] <IRQ> [<ffffffff8170adf1>] dump_stack+0x4c/0x65 [ 384.313290] [<ffffffff810a6a6d>] __lock_acquire+0xf3d/0xf50 [ 384.313290] [<ffffffff810a7375>] lock_acquire+0xd5/0x290 [ 384.313290] [<ffffffffa0043e8c>] ? link_timeout+0x1c/0x170 [tipc] [ 384.313290] [<ffffffffa0043e70>] ? link_state_event+0x4e0/0x4e0 [tipc] [ 384.313290] [<ffffffff81712890>] _raw_spin_lock_bh+0x40/0x80 [ 384.313290] [<ffffffffa0043e8c>] ? link_timeout+0x1c/0x170 [tipc] [ 384.313290] [<ffffffffa0043e8c>] link_timeout+0x1c/0x170 [tipc] [ 384.313290] [<ffffffff810c4698>] call_timer_fn+0xb8/0x490 [ 384.313290] [<ffffffff810c45e0>] ? process_timeout+0x10/0x10 [ 384.313290] [<ffffffff810c5a2c>] run_timer_softirq+0x21c/0x420 [ 384.313290] [<ffffffffa0043e70>] ? link_state_event+0x4e0/0x4e0 [tipc] [ 384.313290] [<ffffffff8105a954>] __do_softirq+0xf4/0x630 [ 384.313290] [<ffffffff8105afdd>] irq_exit+0x5d/0x60 [ 384.313290] [<ffffffff8103ade1>] smp_apic_timer_interrupt+0x41/0x50 [ 384.313290] [<ffffffff817144a0>] apic_timer_interrupt+0x70/0x80 [ 384.313290] <EOI> [<ffffffff8100db10>] ? default_idle+0x20/0x210 [ 384.313290] [<ffffffff8100db0e>] ? default_idle+0x1e/0x210 [ 384.313290] [<ffffffff8100e61a>] arch_cpu_idle+0xa/0x10 [ 384.313290] [<ffffffff81099803>] cpu_startup_entry+0x2c3/0x530 [ 384.313290] [<ffffffff810d2893>] ? clockevents_register_device+0x113/0x200 [ 384.313290] [<ffffffff81038b0f>] start_secondary+0x13f/0x170 Fixes: 8a0f6ebe8494 ("tipc: involve reference counter for node structure") Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-23tipc: fix random link reset problemErik Hugne1-1/+2
In the function tipc_sk_rcv(), the stack variable 'err' is only initialized to TIPC_ERR_NO_PORT for the first iteration over the link input queue. If a chain of messages are received from a link, failure to lookup the socket for any but the first message will cause the message to bounce back out on a random link. We fix this by properly initializing err. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-23tipc: fix topology server broken issueYing Xue1-6/+3
When a new topology server is launched in a new namespace, its listening socket is inserted into the "init ns" namespace's socket hash table rather than the one owned by the new namespace. Although the socket's namespace is forcedly changed to the new namespace later, the socket is still stored in the socket hash table of "init ns" namespace. When a client created in the new namespace connects its own topology server, the connection is failed as its server's socket could not be found from its own namespace's socket table. If __sock_create() instead of original sock_create_kern() is used to create the server's socket through specifying an expected namesapce, the socket will be inserted into the specified namespace's socket table, thereby avoiding to the topology server broken issue. Fixes: 76100a8a64bc ("tipc: fix netns refcnt leak") Reported-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-23ibmveth: Fix off-by-one error in ibmveth_change_mtu()David Gibson1-2/+2
AFAIK the PAPR document which defines the virtual device interface used by the ibmveth driver doesn't specify a specific maximum MTU. So, in the ibmveth driver, the maximum allowed MTU is determined by the maximum allocated buffer size of 64k (corresponding to one page in the common case) minus the per-buffer overhead IBMVETH_BUFF_OH (which has value 22 for 14 bytes of ethernet header, plus 8 bytes for an opaque handle). This suggests a maximum allowable MTU of 65514 bytes, but in fact the driver only permits a maximum MTU of 65513. This is because there is a < instead of an <= in ibmveth_change_mtu(), which only permits an MTU which is strictly smaller than the buffer size, rather than allowing the buffer to be completely filled. This patch fixes the buglet. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-23netdev_alloc_pcpu_stats: use less common iterator variableJohannes Berg1-3/+3
With the CPU iteration variable called 'i', it's relatively easy to have variable shadowing which sparse will warn about. Avoid that by renaming the variable to __cpu which is less likely to be used in the surrounding context. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-22vxlan: remove the unnecessary codesLi RongQing1-5/+1
The return value of vxlan_fdb_replace always is greater than or equal to 0 Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-22net/macb: Factor out one-time assignment from loopBen Shelton1-2/+2
In 02c958dd3 (net/macb: add TX multiqueue support for gem), the initialization of tx_head and tx_tail in macb_init_rings() was moved inside the loop that iterates over each element in the ring. Since tx_head and tx_tail only need to be assigned once, move them back out of the loop. Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-22net: do not deplete pfmemalloc reserveEric Dumazet1-2/+7
build_skb() should look at the page pfmemalloc status. If set, this means page allocator allocated this page in the expectation it would help to free other pages. Networking stack can do that only if skb->pfmemalloc is also set. Also, we must refrain using high order pages from the pfmemalloc reserve, so __page_frag_refill() must also use __GFP_NOMEMALLOC for them. Under memory pressure, using order-0 pages is probably the best strategy. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-22ip6_gre: use netdev_alloc_pcpu_stats()Johannes Berg1-8/+1
The code there just open-codes the same, so use the provided macro instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-22mpls: Prevent use of implicit NULL label as outgoing labelRobert Shearman1-0/+9
The reserved implicit-NULL label isn't allowed to appear in the label stack for packets, so make it an error for the control plane to specify it as an outgoing label. Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Robert Shearman <rshearma@brocade.com> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-22mpls: Per-device enabling of packet inputRobert Shearman3-2/+78
An MPLS network is a single trust domain where the edges must be in control of what labels make their way into the core. The simplest way of ensuring this is for the edge device to always impose the labels, and not allow forward labeled traffic from untrusted neighbours. This is achieved by allowing a per-device configuration of whether MPLS traffic input from that interface should be processed or not. To be secure by default, the default state is changed to MPLS being disabled on all interfaces unless explicitly enabled and no global option is provided to change the default. Whilst this differs from other protocols (e.g. IPv6), network operators are used to explicitly enabling MPLS forwarding on interfaces, and with the number of links to the MPLS core typically fairly low this doesn't present too much of a burden on operators. Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Robert Shearman <rshearma@brocade.com> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-22mpls: Per-device MPLS stateRobert Shearman3-2/+55
Add per-device MPLS state to supported interfaces. Use the presence of this state in mpls_route_add to determine that this is a supported interface. Use the presence of mpls_dev to drop packets that arrived on an unsupported interface - previously they were allowed through. Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Robert Shearman <rshearma@brocade.com> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-22bnx2x: Prevent inner-reload while VFs existYuval Mintz2-9/+51
On some feature changes, driver employes an inner-reload flow where it resets the function and re-configures it with the new required set of parameters. Such a flow proves fatal to any VF since those were not intended to be used while HW is being reset underneath, causing them [at best] to lose all connectivity. This changes driver behavior to fail all configuration changes [e.g., mtu change] requested of the driver in case VFs are active. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-22rhashtable: Do not schedule more than one rehash if we can't grow furtherThomas Graf1-2/+2
The current code currently only stops inserting rehashes into the chain when no resizes are currently scheduled. As long as resizes are scheduled and while inserting above the utilization watermark, more and more rehashes will be scheduled. This lead to a perfect DoS storm with thousands of rehashes scheduled which lead to thousands of spinlocks to be taken sequentially. Instead, only allow either a series of resizes or a single rehash. Drop any further rehashes and return -EBUSY. Fixes: ccd57b1bd324 ("rhashtable: Add immediate rehash during insertion") Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-22rhashtable: Schedule async resize when sync realloc failsThomas Graf1-1/+6
When rhashtable_insert_rehash() fails with ENOMEM, this indicates that we can't allocate the necessary memory in the current context but the limits as set by the user would still allow to grow. Thus attempt an async resize in the background where we can allocate using GFP_KERNEL which is more likely to succeed. The insertion itself will still fail to indicate pressure. This fixes a bug where the table would never continue growing once the utilization is above 100%. Fixes: ccd57b1bd324 ("rhashtable: Add immediate rehash during insertion") Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-22tcp: fix possible deadlock in tcp_send_fin()Eric Dumazet1-1/+19
Using sk_stream_alloc_skb() in tcp_send_fin() is dangerous in case a huge process is killed by OOM, and tcp_mem[2] is hit. To be able to free memory we need to make progress, so this patch allows FIN packets to not care about tcp_mem[2], if skb allocation succeeded. In a follow-up patch, we might abort tcp_send_fin() infinite loop in case TIF_MEMDIE is set on this thread, as memory allocator did its best getting extra memory already. This patch reverts d22e15371811 ("tcp: fix tcp fin memory accounting") Fixes: d22e15371811 ("tcp: fix tcp fin memory accounting") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-22dmaengine: hsu: don't prompt for hsu_core partVinod Koul1-1/+1
HSU_DMA is selected by the HSU_DMA_PCI driver, this should be user selected so remove the user prompt for this Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-21net/mlx4_core: Fix reading HCA max message size in mlx4_QUERY_DEV_CAPEran Ben Elisha1-1/+1
Currently we parse max_msg_sz from the wrong offset in QUERY_DEV_CAP, fix to use the right offset. Fixes: 0b131561a7d6 ('net/mlx4_en: Add Flow control statistics [..]') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-21sparc: Use GFP_ATOMIC in ldc_alloc_exp_dring() as it can be called in softirq contextSowmini Varadhan1-1/+1
Since it is possible for vnet_event_napi to end up doing vnet_control_pkt_engine -> ... -> vnet_send_attr -> vnet_port_alloc_tx_ring -> ldc_alloc_exp_dring -> kzalloc() (i.e., in softirq context), kzalloc() should be called with GFP_ATOMIC from ldc_alloc_exp_dring. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-21sparc64: Use M7 PMC write on all chips T4 and onward.David S. Miller1-32/+3
They both work equally well, and the M7 implementation is simpler and cheaper (less register writes). With help from David Ahern. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-21parisc: Replace PT_NLEVELS with CONFIG_PGTABLE_LEVELSGuenter Roeck1-3/+3
The following warning is seen when compiling parisc images ./arch/parisc/include/asm/pgalloc.h: In function 'pgd_alloc': ./arch/parisc/include/asm/pgalloc.h:29:5: warning: "PT_NLEVELS" is not defined Some definitions of PT_NLEVELS were missed with the conversion to CONFIG_PGTABLE_LEVELS. Fixes: f24ffde43237 ("parisc: expose number of page table levels on Kconfig level") Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Helge Deller <deller@gmx.de>
2015-04-21parisc: Eliminate sg_virt_addr() and private scatterlist.hMatthew Wilcox6-33/+25
The only reason to keep parisc's private asm/scatterlist.h was that it had the macro sg_virt_addr(). Convert all callers to use something else (sometimes just sg->offset was enough, others should use sg_virt()), and we can just use the asm-generic scatterlist.h instead. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Dave Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2015-04-21tcp: add memory barriers to write space pathsjbaron@akamai.com2-1/+5
Ensure that we either see that the buffer has write space in tcp_poll() or that we perform a wakeup from the input side. Did not run into any actual problem here, but thought that we should make things explicit. Signed-off-by: Jason Baron <jbaron@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-21media: remove unused variable that causes a warningLinus Torvalds1-1/+0
My 'allmodconfig' build is _almost_ free of warnings, and most of the remaining ones are for legacy drivers that just do bad things that I can't find it in my black heart to care too much about. But this one was just annoying me: drivers/media/v4l2-core/videobuf2-core.c:3256:26: warning: unused variable ‘fileio’ [-Wunused-variable] because commit 0e661006370b ("[media] vb2: fix 'UNBALANCED' warnings when calling vb2_thread_stop()") removed all users of 'fileio' and instead calls "__vb2_cleanup_fileio(q)" to clean up q->fileio. But the now unused 'fileio' variable was left around. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-21Revert "ocfs2: incorrect check for debugfs returns"Linus Torvalds3-37/+16
This reverts commit e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6. Huang Ying reports that this causes a hang at boot with debugfs disabled. It is true that the debugfs error checks are kind of confusing, and this code certainly merits more cleanup and thinking about it, but there's something wrong with the trivial "check not just for NULL, but for error pointers too" patch. Yes, with debugfs disabled, we will end up setting the o2hb_debug_dir pointer variable to an error pointer (-ENODEV), and then continue as if everything was fine. But since debugfs is disabled, all the _users_ of that pointer end up being compiled away, so even though the pointer can not be dereferenced, that's still fine. So it's confusing and somewhat questionable, but the "more correct" error checks end up causing more trouble than they fix. Reported-by: Huang Ying <ying.huang@intel.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Chengyu Song <csong84@gatech.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-20altera tse: Error-Bit on tx-avalon-stream always set.Andreas Oetken1-1/+0
The Error-Bit on the avalon streaming interface of the tx-dma-channel was always set. In SGMII configurations this leads to error-symbols on the PCS and packet-rejection on the receiver side (e.g. SGMII/1000Base-X connected switch). This only applies to the tse-configuration with MSGDMA. This issue was detected and fixed on a custom board with a direct connection to a Marvell switch in SGMII-PHY-Mode. (incl. custom patches for SGMII-PCS). According to the datasheet if ff_tx_err (avalon-streaming) is set it is forwarded to gm_tx_err. As a result the PCS is forwarding the error by sending a "/V/"-caracter. Signed-off-by: Andreas Oetken <ennoerlangen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-20net: dsa: mv88e6xxx: use PORT_DEFAULT_VLANVivien Didelot1-1/+2
Minor, use the explicit PORT_DEFAULT_VLAN define instead of 0x07. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-20net: dsa: mv88e6xxx: fix setup of port control 1Vivien Didelot1-2/+1
mv88e6xxx_setup_port_common was writing to PORT_DEFAULT_VLAN (port offset 0x07) instead of PORT_CONTROL_1 (port offset 0x05). Fixes: cca8b1337541 ("net: dsa: Use mnemonics rather than register numbers") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-20ppp: call skb_checksum_complete_unset in ppp_receive_frameTom Herbert1-0/+1
Call checksum_complete_unset in PPP receive to discard checksum-complete value. PPP does not pull checksum for headers and also modifies packet as in VJ compression. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-20net: add skb_checksum_complete_unsetTom Herbert1-0/+12
This function changes ip_summed to CHECKSUM_NONE if CHECKSUM_COMPLETE is set. This is called to discard checksum-complete when packet is being modified and checksum is not pulled for headers in a layer. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-20pppoe: Lacks DST MAC address checkJoakim Tjernlund1-0/+3
A pppoe session is identified by its session ID and MAC address. Currently pppoe does not check if the received pkg has the correct MAC address. This is a problem when the eth I/F is in promisc mode as then any DST MAC address is accepted. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@transmode.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-20iommu-common: rename iommu_pool_hash to iommu_hash_commonSowmini Varadhan1-3/+3
When CONFIG_DEBUG_FORCE_WEAK_PER_CPU is set, the DEFINE_PER_CPU_SECTION macro will define an extern __pcpu_unique_##name variable that could conflict with the same definition in powerpc at this time. Avoid that conflict by renaming iommu_pool_hash in iommu-common.c Thanks to Guenter Roeck for catching this, and helping to test the fix. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-20iommu-common: fix x86_64 compiler warningsSowmini Varadhan1-7/+7
Declare iommu_large_alloc as static. Remove extern definition for iommu_tbl_pool_init(). Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-20ip_forward: Drop frames with attached skb->skSebastian Pöhn1-0/+3
Initial discussion was: [FYI] xfrm: Don't lookup sk_policy for timewait sockets Forwarded frames should not have a socket attached. Especially tw sockets will lead to panics later-on in the stack. This was observed with TPROXY assigning a tw socket and broken policy routing (misconfigured). As a result frame enters forwarding path instead of input. We cannot solve this in TPROXY as it cannot know that policy routing is broken. v2: Remove useless comment Signed-off-by: Sebastian Poehn <sebastian.poehn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-20ARM: OMAP2+: Fix booting with configs that don't have MFD_SYSCONTony Lindgren1-0/+1
With the recent changes omaps have developed a dependency to MFD_SYSCON. This is used for system control module generic register area and some clocks. We do have it selected in omap2plus_defconfig, but targeted config files may not have it selected. Let's make sure it's selected like few other ARM platforms are already doing. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-04-20Input: lm8333 - fix broken email addressWolfram Sang1-2/+2
My Pengutronix address is not valid anymore, redirect people to the Pengutronix kernel team. Reported-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-20Input: cyapa - fix setting suspend scan rateDudley Du1-2/+2
The suspend scan rate value should not exceed 1000, unfortunately when implementing the limit we used max_t instead of min_t, causing the value to be at least 1000. Signed-off-by: Dudley Du <dudl@cypress.com> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-20Input: elan_i2c - fix calculating number of x and y traces.Duson Lin2-4/+4
According to Elan's firmware engineers we should not be subtracting 1 form the raw number of x and y traces so that the pitch size is correct. For example, if the touchpad x resolution is 2800 and x trace number is 20, the pitch size of x should be 2800/20 = 140, not 2800/19 = 147.36. Signed-off-by: Duson Lin <dusonlin@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-20Input: elan_i2c - report hovering contactsDuson Lin1-4/+11
When hover is detected report ABS_MT_DISTANCE as 1; for active contacts the distance is reported as 0. Signed-off-by: Duson Lin <dusonlin@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-20Input: elants_i2c - zero-extend hardware ID in firmware nameDmitry Torokhov1-1/+1
Let's zero-extend hardware id number when forming firmware file name, to avoid kernel requesting firmware like "elants_i2c_ 0.bin", which is quite unexpected. Acked-by: Charlie Mooney<charliemooney@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-20smp: don't use 16-bit words for atomic accessesLinus Torvalds1-1/+1
Yes, it should work, but it's a bad idea. Not only did ARM64 not have the 16-bit access code (there's a separate patch to add it), it's just not a good atomic type. Some architectures fundamentally don't do atomic accesses in them (alpha), and it's not like it saves any space here anyway because of structure packing issues. We normally should aim for flags to be "unsigned int" or "unsigned long". And if space is at a premium, use a single byte (although that causes problems on alpha again). There might be very special cases where a 16-byte entity is really wanted, but this is not one of them. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-20omapdss: extend pm notifier to handle hibernationGrygorii Strashko1-0/+4
Add handling of missed events in omap_dss_pm_notif which are needed to support hibernation (suspend to disk). Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.