aboutsummaryrefslogtreecommitdiffstats
path: root/arch (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-06-27Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds3-2/+4
Pull ARM fixes from Russell King: "Three more fixes: - Fix the previous fix merged in the last pull for the Thumb2 decompressor. - A fix from Vladimir to correctly identify the V7M cache type. - The optimised 3G vmsplit case does not work with LPAE, so don't allow this to be selected for LPAE configurations" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8682/1: V7M: Set cacheid iff DminLine or IminLine is nonzero ARM: 8681/1: make VMSPLIT_3G_OPT depends on !ARM_LPAE ARM: 8680/1: boot/compressed: fix inappropriate Thumb2 mnemonic for __nop
2017-06-26Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds1-6/+1
Pull s390 bugfix from Martin Schwidefsky: "One last s390 patch for 4.12 Revert the re-IPL semantics back to the v4.7 state. It turned out that the memory layout may change due to memory hotplug if load-normal is used" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/ipl: revert Load Normal semantics for LPAR CCW-type re-IPL
2017-06-25Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-2/+1
Pull x86 fix from Thomas Gleixner: "A single fix to unbreak the vdso32 build for 64bit kernels caused by excess #includes in the mshyperv header" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mshyperv: Remove excess #includes from mshyperv.h
2017-06-25Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds2-3/+3
Pull timer fixes from Thomas Gleixner: "A few fixes for timekeeping and timers: - Plug a subtle race due to a missing READ_ONCE() in the timekeeping code where reloading of a pointer results in an inconsistent callback argument being supplied to the clocksource->read function. - Correct the CLOCK_MONOTONIC_RAW sub-nanosecond accounting in the time keeping core code, to prevent a possible discontuity. - Apply a similar fix to the arm64 vdso clock_gettime() implementation - Add missing includes to clocksource drivers, which relied on indirect includes which fails in certain configs. - Use the proper iomem pointer for read/iounmap in a probe function" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arm64/vdso: Fix nsec handling for CLOCK_MONOTONIC_RAW time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accounting time: Fix clock->read(clock) race around clocksource changes clocksource: Explicitly include linux/clocksource.h when needed clocksource/drivers/arm_arch_timer: Fix read and iounmap of incorrect variable
2017-06-25Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-2/+2
Pull perf fixes from Thomas Gleixner: "Three fixlets for perf: - Return the proper error code if aux buffers for a event are not supported. - Calculate the probe offset for inlined functions correctly - Update the Skylake DTLB load/store miss event so it can count 1G TLB entries as well" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf probe: Fix probe definition for inlined functions perf/x86/intel: Add 1G DTLB load/store miss support for SKL perf/aux: Correct return code of rb_alloc_aux() if !has_aux(ev)
2017-06-24x86/mshyperv: Remove excess #includes from mshyperv.hThomas Gleixner1-2/+1
A recent commit included linux/slab.h in linux/irq.h. This breaks the build of vdso32 on a 64-bit kernel. The reason is that linux/irq.h gets included into the vdso code via linux/interrupt.h which is included from asm/mshyperv.h. That makes the 32-bit vdso compile fail, because slab.h includes the pgtable headers for 64-bit on a 64-bit build. Neither linux/clocksource.h nor linux/interrupt.h are needed in the mshyperv.h header file itself - it has a dependency on <linux/atomic.h>. Remove the includes and unbreak the build. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: devel@linuxdriverproject.org Fixes: dee863b571b0 ("hv: export current Hyper-V clocksource") Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1706231038460.2647@nanos Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-23Merge tag 'powerpc-4.12-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds7-50/+166
Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 4.12. Most of these actually came in last week but got held up for some more testing. - three fixes for kprobes/ftrace/livepatch interactions. - properly handle data breakpoints when using the Radix MMU. - fix for perf sampling of registers during call_usermodehelper(). - properly initialise the thread_info on our emergency stacks - add an explicit flush when doing TLB invalidations for a process using NPU2. Thanks to: Alistair Popple, Naveen N. Rao, Nicholas Piggin, Ravi Bangoria, Masami Hiramatsu" * tag 'powerpc-4.12-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64: Initialise thread_info for emergency stacks powerpc/powernv/npu-dma: Add explicit flush when sending an ATSD powerpc/perf: Fix oops when kthread execs user process powerpc/64s: Handle data breakpoints in Radix mode powerpc/kprobes: Skip livepatch_handler() for jprobes powerpc/ftrace: Pass the correct stack pointer for DYNAMIC_FTRACE_WITH_REGS powerpc/kprobes: Pause function_graph tracing during jprobes handling
2017-06-23powerpc/64: Initialise thread_info for emergency stacksNicholas Piggin1-3/+28
Emergency stacks have their thread_info mostly uninitialised, which in particular means garbage preempt_count values. Emergency stack code runs with interrupts disabled entirely, and is used very rarely, so this has been unnoticed so far. It was found by a proposed new powerpc watchdog that takes a soft-NMI directly from the masked_interrupt handler and using the emergency stack. That crashed at BUG_ON(in_nmi()) in nmi_enter(). preempt_count()s were found to be garbage. To fix this, zero the entire THREAD_SIZE allocation, and initialize the thread_info. Cc: stable@vger.kernel.org Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Move it all into setup_64.c, use a function not a macro. Fix crashes on Cell by setting preempt_count to 0 not HARDIRQ_OFFSET] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-22KVM: x86: fix singlestepping over syscallPaolo Bonzini3-30/+34
TF is handled a bit differently for syscall and sysret, compared to the other instructions: TF is checked after the instruction completes, so that the OS can disable #DB at a syscall by adding TF to FMASK. When the sysret is executed the #DB is taken "as if" the syscall insn just completed. KVM emulates syscall so that it can trap 32-bit syscall on Intel processors. Fix the behavior, otherwise you could get #DB on a user stack which is not nice. This does not affect Linux guests, as they use an IST or task gate for #DB. This fixes CVE-2017-7518. Cc: stable@vger.kernel.org Reported-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-06-22Merge tag 'kvm-s390-master-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linuxRadim Krčmář1-9/+6
KVM: s390: fix shadow table handling for nested guests Some odd-ball cases (real-space designation ASCEs) are handled wrong for the shadow page tables. Fix it.
2017-06-22powerpc/powernv/npu-dma: Add explicit flush when sending an ATSDAlistair Popple1-29/+65
NPU2 requires an extra explicit flush to an active GPU PID when sending address translation shoot downs (ATSDs) to reliably flush the GPU TLB. This patch adds just such a flush at the end of each sequence of ATSDs. We can safely use PID 0 which is always reserved and active on the GPU. PID 0 is only used for init_mm which will never be a user mm on the GPU. To enforce this we add a check in pnv_npu2_init_context() just in case someone tries to use PID 0 on the GPU. Signed-off-by: Alistair Popple <alistair@popple.id.au> [mpe: Use true/false for bool literals] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-22KVM: s390: gaccess: fix real-space designation asce handling for gmap shadowsHeiko Carstens1-9/+6
For real-space designation asces the asce origin part is only a token. The asce token origin must not be used to generate an effective address for storage references. This however is erroneously done within kvm_s390_shadow_tables(). Furthermore within the same function the wrong parts of virtual addresses are used to generate a corresponding real address (e.g. the region second index is used as region first index). Both of the above can result in incorrect address translations. Only for real space designations with a token origin of zero and addresses below one megabyte the translation was correct. Furthermore replace a "!asce.r" statement with a "!*fake" statement to make it more obvious that a specific condition has nothing to do with the architecture, but with the fake handling of real space designations. Fixes: 3218f7094b6b ("s390/mm: support real-space for gmap shadows") Cc: David Hildenbrand <david@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-06-22perf/x86/intel: Add 1G DTLB load/store miss support for SKLKan Liang1-2/+2
Current DTLB load/store miss events (0x608/0x649) only counts 4K,2M and 4M page size. Need to extend the events to support any page size (4K/2M/4M/1G). The complete DTLB load/store miss events are: DTLB_LOAD_MISSES.WALK_COMPLETED 0xe08 DTLB_STORE_MISSES.WALK_COMPLETED 0xe49 Signed-off-by: Kan Liang <Kan.liang@intel.com> Cc: <stable@vger.kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: eranian@google.com Link: http://lkml.kernel.org/r/20170619142609.11058-1-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20KVM: MIPS: Fix maybe-uninitialized build failureJames Cowgill1-1/+5
This commit fixes a "maybe-uninitialized" build failure in arch/mips/kvm/tlb.c when KVM, DYNAMIC_DEBUG and JUMP_LABEL are all enabled. The failure is: In file included from ./include/linux/printk.h:329:0, from ./include/linux/kernel.h:13, from ./include/asm-generic/bug.h:15, from ./arch/mips/include/asm/bug.h:41, from ./include/linux/bug.h:4, from ./include/linux/thread_info.h:11, from ./include/asm-generic/current.h:4, from ./arch/mips/include/generated/asm/current.h:1, from ./include/linux/sched.h:11, from arch/mips/kvm/tlb.c:13: arch/mips/kvm/tlb.c: In function ‘kvm_mips_host_tlb_inv’: ./include/linux/dynamic_debug.h:126:3: error: ‘idx_kernel’ may be used uninitialized in this function [-Werror=maybe-uninitialized] __dynamic_pr_debug(&descriptor, pr_fmt(fmt), \ ^~~~~~~~~~~~~~~~~~ arch/mips/kvm/tlb.c:169:16: note: ‘idx_kernel’ was declared here int idx_user, idx_kernel; ^~~~~~~~~~ There is a similar error relating to "idx_user". Both errors were observed with GCC 6. As far as I can tell, it is impossible for either idx_user or idx_kernel to be uninitialized when they are later read in the calls to kvm_debug, but to satisfy the compiler, add zero initializers to both variables. Signed-off-by: James Cowgill <James.Cowgill@imgtec.com> Fixes: 57e3869cfaae ("KVM: MIPS/TLB: Generalise host TLB invalidate to kernel ASID") Cc: <stable@vger.kernel.org> # 4.11+ Acked-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-06-20Merge branch 'kvm-ppc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcRadim Krčmář3-20/+118
* fix problems that could cause hangs or crashes in the host on POWER9 * fix problems that could allow guests to potentially affect or disrupt the execution of the controlling userspace
2017-06-20arm64/vdso: Fix nsec handling for CLOCK_MONOTONIC_RAWWill Deacon2-3/+3
Recently vDSO support for CLOCK_MONOTONIC_RAW was added in 49eea433b326 ("arm64: Add support for CLOCK_MONOTONIC_RAW in clock_gettime() vDSO"). Noticing that the core timekeeping code never set tkr_raw.xtime_nsec, the vDSO implementation didn't bother exposing it via the data page and instead took the unshifted tk->raw_time.tv_nsec value which was then immediately shifted left in the vDSO code. Unfortunately, by accellerating the MONOTONIC_RAW clockid, it uncovered potential 1ns time inconsistencies caused by the timekeeping core not handing sub-ns resolution. Now that the core code has been fixed and is actually setting tkr_raw.xtime_nsec, we need to take that into account in the vDSO by adding it to the shifted raw_time value, in order to fix the user-visible inconsistency. Rather than do that at each use (and expand the data page in the process), instead perform the shift/addition operation when populating the data page and remove the shift from the vDSO code entirely. [jstultz: minor whitespace tweak, tried to improve commit message to make it more clear this fixes a regression] Reported-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Daniel Mentz <danielmentz@google.com> Acked-by: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: "stable #4 . 8+" <stable@vger.kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Link: http://lkml.kernel.org/r/1496965462-20003-4-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-19mm: larger stack guard gap, between vmasHugh Dickins16-27/+30
Stack guard page is a useful feature to reduce a risk of stack smashing into a different mapping. We have been using a single page gap which is sufficient to prevent having stack adjacent to a different mapping. But this seems to be insufficient in the light of the stack usage in userspace. E.g. glibc uses as large as 64kB alloca() in many commonly used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX] which is 256kB or stack strings with MAX_ARG_STRLEN. This will become especially dangerous for suid binaries and the default no limit for the stack size limit because those applications can be tricked to consume a large portion of the stack and a single glibc call could jump over the guard page. These attacks are not theoretical, unfortunatelly. Make those attacks less probable by increasing the stack guard gap to 1MB (on systems with 4k pages; but make it depend on the page size because systems with larger base pages might cap stack allocations in the PAGE_SIZE units) which should cover larger alloca() and VLA stack allocations. It is obviously not a full fix because the problem is somehow inherent, but it should reduce attack space a lot. One could argue that the gap size should be configurable from userspace, but that can be done later when somebody finds that the new 1MB is wrong for some special case applications. For now, add a kernel command line option (stack_guard_gap) to specify the stack gap size (in page units). Implementation wise, first delete all the old code for stack guard page: because although we could get away with accounting one extra page in a stack vma, accounting a larger gap can break userspace - case in point, a program run with "ulimit -S -v 20000" failed when the 1MB gap was counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK and strict non-overcommit mode. Instead of keeping gap inside the stack vma, maintain the stack guard gap as a gap between vmas: using vm_start_gap() in place of vm_start (or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few places which need to respect the gap - mainly arch_get_unmapped_area(), and and the vma tree's subtree_gap support for that. Original-patch-by: Oleg Nesterov <oleg@redhat.com> Original-patch-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Tested-by: Helge Deller <deller@gmx.de> # parisc Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-19Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds5-13/+10
Pull ARM SoC fixes from Olof Johansson: "Stream of fixes has slowed down, only a few this week: - Some DT fixes for Allwinner platforms, and addition of a clock to the R_CCU clock controller that had been missed. - A couple of small DT fixes for am335x-sl50" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU ARM: sunxi: h3-h5: Add PLL_PERIPH0 clock to the R_CCU ARM: dts: am335x-sl50: Fix cannot claim requested pins for spi0 ARM: dts: am335x-sl50: Fix card detect pin for mmc1 arm64: allwinner: h5: Remove syslink to shared DTSI ARM: sunxi: h3/h5: fix the compatible of R_CCU
2017-06-18Merge tag 'sunxi-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixesOlof Johansson4-7/+8
Allwinner fixes for 4.12 A few fixes around the PRCM support that got in 4.12 with a wrong compatible, and a missing clock in the binding. * tag 'sunxi-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU ARM: sunxi: h3-h5: Add PLL_PERIPH0 clock to the R_CCU arm64: allwinner: h5: Remove syslink to shared DTSI ARM: sunxi: h3/h5: fix the compatible of R_CCU Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'omap-for-v4.12/fixes-sl50' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixesOlof Johansson1-6/+2
Two fixes for am335x-sl50 to fix a boot time error for claiming SPI pins, and to fix a SDIO card detect pin for production version of the device. * tag 'omap-for-v4.12/fixes-sl50' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-sl50: Fix cannot claim requested pins for spi0 ARM: dts: am335x-sl50: Fix card detect pin for mmc1 Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-19Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds8-31/+34
Pull MIPS fixes from Ralf Baechle: - Three highmem fixes: + Fixed mapping initialization + Adjust the pkmap location + Ensure we use at most one page for PTEs - Fix makefile dependencies for .its targets to depend on vmlinux - Fix reversed condition in BNEZC and JIALC software branch emulation - Only flush initialized flush_insn_slot to avoid NULL pointer dereference - perf: Remove incorrect odd/even counter handling for I6400 - ftrace: Fix init functions tracing * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: .its targets depend on vmlinux MIPS: Fix bnezc/jialc return address calculation MIPS: kprobes: flush_insn_slot should flush only if probe initialised MIPS: ftrace: fix init functions tracing MIPS: mm: adjust PKMAP location MIPS: highmem: ensure that we don't use more than one page for PTEs MIPS: mm: fixed mappings: correct initialisation MIPS: perf: Remove incorrect odd/even counter handling for I6400
2017-06-18Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds4-4/+8
Pull x86 fixes from Thomas Gleixner: "Two fixlets for x86: - Handle WARN_ONs proper with the new UD based WARN implementation - Disable 1G mappings when 2M mappings are disabled by kmemleak or debug_pagealloc. Otherwise 1G mappings might still be used, confusing the debug mechanisms" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Disable 1GB direct mappings when disabling 2MB mappings x86/debug: Handle early WARN_ONs proper
2017-06-17Merge tag 'powerpc-4.12-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds5-10/+13
Pull powerpc fixes from Michael Ellerman: "Three small fixes for recently merged code: - remove a spurious WARN_ON when a PCI device has no of_node, it's allowed in some circumstances for there to be no of_node. - fix the offset for store EOI MMIOs in the XIVE interrupt controller. - fix non-const WARN_ONs which were becoming BUGs due to them losing BUGFLAG_WARNING in a recent cleanup patch. Thanks to: Alexey Kardashevskiy, Alistair Popple, Benjamin Herrenschmidt" * tag 'powerpc-4.12-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/debug: Add missing warn flag to WARN_ON's non-builtin path powerpc/xive: Fix offset for store EOI MMIOs powerpc/npu-dma: Remove spurious WARN_ON when a PCI device has no of_node
2017-06-16powerpc/perf: Fix oops when kthread execs user processRavi Bangoria1-1/+2
When a kthread calls call_usermodehelper() the steps are: 1. allocate current->mm 2. load_elf_binary() 3. populate current->thread.regs While doing this, interrupts are not disabled. If there is a perf interrupt in the middle of this process (i.e. step 1 has completed but not yet reached to step 3) and if perf tries to read userspace regs, kernel oops with following log: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0000000000da0fc ... Call Trace: perf_output_sample_regs+0x6c/0xd0 perf_output_sample+0x4e4/0x830 perf_event_output_forward+0x64/0x90 __perf_event_overflow+0x8c/0x1e0 record_and_restart+0x220/0x5c0 perf_event_interrupt+0x2d8/0x4d0 performance_monitor_exception+0x54/0x70 performance_monitor_common+0x158/0x160 --- interrupt: f01 at avtab_search_node+0x150/0x1a0 LR = avtab_search_node+0x100/0x1a0 ... load_elf_binary+0x6e8/0x15a0 search_binary_handler+0xe8/0x290 do_execveat_common.isra.14+0x5f4/0x840 call_usermodehelper_exec_async+0x170/0x210 ret_from_kernel_thread+0x5c/0x7c Fix it by setting abi to PERF_SAMPLE_REGS_ABI_NONE when userspace pt_regs are not set. Fixes: ed4a4ef85cf5 ("powerpc/perf: Add support for sampling interrupt register state") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-16powerpc/64s: Handle data breakpoints in Radix modeNaveen N. Rao1-4/+7
On Power9, trying to use data breakpoints throws the splat shown below. This is because the check for a data breakpoint in DSISR is in do_hash_page(), which is not called when in Radix mode. Unable to handle kernel paging request for data at address 0xc000000000e19218 Faulting instruction address: 0xc0000000001155e8 cpu 0x0: Vector: 300 (Data Access) at [c0000000ef1e7b20] pc: c0000000001155e8: find_pid_ns+0x48/0xe0 lr: c000000000116ac4: find_task_by_vpid+0x44/0x90 sp: c0000000ef1e7da0 msr: 9000000000009033 dar: c000000000e19218 dsisr: 400000 Move the check to handle_page_fault() so as to catch data breakpoints in both Hash and Radix MMU modes. We have to change the check in do_hash_page() against 0xa410 to use 0xa450, so as to include the value of (DSISR_DABRMATCH << 16). There are two sites that call handle_page_fault() when in Radix, both already pass DSISR in r4. Fixes: caca285e5ab4 ("powerpc/mm/radix: Use STD_MMU_64 to properly isolate hash related code") Cc: stable@vger.kernel.org # v4.7+ Reported-by: Shriya R. Kulkarni <shriykul@in.ibm.com> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> [mpe: Fix the fall-through case on hash, we need to reload DSISR] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-16powerpc/kprobes: Skip livepatch_handler() for jprobesNaveen N. Rao3-5/+41
ftrace_caller() depends on a modified regs->nip to detect if a certain function has been livepatched. However, with KPROBES_ON_FTRACE, it is possible for regs->nip to have been modified by the kprobes pre_handler (jprobes, for instance). In this case, we do not want to invoke the livepatch_handler so as not to consume the livepatch stack. To distinguish between the two (kprobes and livepatch), we check if there is an active kprobe on the current function. If there is, then we know for sure that it must have modified the NIP as we don't support livepatching a kprobe'd function. In this case, we simply skip the livepatch_handler and branch to the new NIP. Otherwise, the livepatch_handler is invoked. Fixes: ead514d5fb30 ("powerpc/kprobes: Add support for KPROBES_ON_FTRACE") Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-16powerpc/ftrace: Pass the correct stack pointer for DYNAMIC_FTRACE_WITH_REGSNaveen N. Rao1-8/+12
For DYNAMIC_FTRACE_WITH_REGS, we should be passing-in the original set of registers in pt_regs, to capture the state _before_ ftrace_caller. However, we are instead passing the stack pointer *after* allocating a stack frame in ftrace_caller. Fix this by saving the proper value of r1 in pt_regs. Also, use SAVE_10GPRS() to simplify the code. Fixes: 153086644fd1 ("powerpc/ftrace: Add support for -mprofile-kernel ftrace ABI") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-16powerpc/kprobes: Pause function_graph tracing during jprobes handlingNaveen N. Rao1-0/+11
This fixes a crash when function_graph and jprobes are used together. This is essentially commit 237d28db036e ("ftrace/jprobes/x86: Fix conflict between jprobes and function graph tracing"), but for powerpc. Jprobes breaks function_graph tracing since the jprobe hook needs to use jprobe_return(), which never returns back to the hook, but instead to the original jprobe'd function. The solution is to momentarily pause function_graph tracing before invoking the jprobe hook and re-enable it when returning back to the original jprobe'd function. Fixes: 6794c78243bf ("powerpc64: port of the function graph tracer") Cc: stable@vger.kernel.org # v2.6.30+ Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-16powerpc/debug: Add missing warn flag to WARN_ON's non-builtin pathAlexey Kardashevskiy1-1/+1
When trapped on WARN_ON(), report_bug() is expected to return BUG_TRAP_TYPE_WARN so the caller will increment NIP by 4 and continue. The __builtin_constant_p() path of the PPC's WARN_ON() calls (indirectly) __WARN_FLAGS() which has BUGFLAG_WARNING set, however the other branch does not which makes report_bug() report a bug rather than a warning. Fixes: f26dee15103f ("debug: Avoid setting BUGFLAG_WARNING twice") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-16KVM: PPC: Book3S HV: Ignore timebase offset on POWER9 DD1Paul Mackerras1-0/+8
POWER9 DD1 has an erratum where writing to the TBU40 register, which is used to apply an offset to the timebase, can cause the timebase to lose counts. This results in the timebase on some CPUs getting out of sync with other CPUs, which then results in misbehaviour of the timekeeping code. To work around the problem, we make KVM ignore the timebase offset for all guests on POWER9 DD1 machines. This means that live migration cannot be supported on POWER9 DD1 machines. Cc: stable@vger.kernel.org # v4.10+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-06-16KVM: PPC: Book3S HV: Save/restore host values of debug registersPaul Mackerras1-13/+32
At present, HV KVM on POWER8 and POWER9 machines loses any instruction or data breakpoint set in the host whenever a guest is run. Instruction breakpoints are currently only used by xmon, but ptrace and the perf_event subsystem can set data breakpoints as well as xmon. To fix this, we save the host values of the debug registers (CIABR, DAWR and DAWRX) before entering the guest and restore them on exit. To provide space to save them in the stack frame, we expand the stack frame allocated by kvmppc_hv_entry() from 112 to 144 bytes. Fixes: b005255e12a3 ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08) Cc: stable@vger.kernel.org # v3.14+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-06-15powerpc/xive: Fix offset for store EOI MMIOsBenjamin Herrenschmidt3-8/+10
Architecturally we should apply a 0x400 offset for these. Not doing it will break future HW implementations. The offset of 0 is supposed to remain for "triggers" though not all sources support both trigger and store EOI, and in P9 specifically, some sources will treat 0 as a store EOI. But future chips will not. So this makes us use the properly architected offset which should work always. Fixes: 243e25112d06 ("powerpc/xive: Native exploitation of the XIVE interrupt controller") Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-15MIPS: .its targets depend on vmlinuxPaul Burton1-5/+5
The .its targets require information about the kernel binary, such as its entry point, which is extracted from the vmlinux ELF. We therefore require that the ELF is built before the .its files are generated. Declare this requirement in the Makefile such that make will ensure this is always the case, otherwise in corner cases we can hit issues as the .its is generated with an incorrect (either invalid or stale) entry point. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: cf2a5e0bb4c6 ("MIPS: Support generating Flattened Image Trees (.itb)") Cc: linux-mips@linux-mips.org Cc: stable <stable@vger.kernel.org> # v4.9+ Patchwork: https://patchwork.linux-mips.org/patch/16179/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-15MIPS: Fix bnezc/jialc return address calculationPaul Burton1-1/+3
The code handling the pop76 opcode (ie. bnezc & jialc instructions) in __compute_return_epc_for_insn() needs to set the value of $31 in the jialc case, which is encoded with rs = 0. However its check to differentiate bnezc (rs != 0) from jialc (rs = 0) was unfortunately backwards, meaning that if we emulate a bnezc instruction we clobber $31 & if we emulate a jialc instruction it actually behaves like a jic instruction. Fix this by inverting the check of rs to match the way the instructions are actually encoded. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 28d6f93d201d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions") Cc: stable <stable@vger.kernel.org> # v4.0+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16178/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-2/+5
Pull networking fixes from David Miller: 1) The netlink attribute passed in to dev_set_alias() is not necessarily NULL terminated, don't use strlcpy() on it. From Alexander Potapenko. 2) Fix implementation of atomics in arm64 bpf JIT, from Daniel Borkmann. 3) Correct the release of netdevs and driver private data in certain circumstances. 4) Sanitize netlink message length properly in decnet, from Mateusz Jurczyk. 5) Don't leak kernel data in rtnl_fill_vfinfo() netlink blobs. From Yuval Mintz. 6) Hash secret is never initialized in ipv6 ILA translation code, from Arnd Bergmann. I guess those clang warnings about unused inline functions are useful for something! 7) Fix endian selection in bpf_endian.h, from Daniel Borkmann. 8) Sanitize sockaddr length before dereferncing any fields in AF_UNIX and CAIF. From Mateusz Jurczyk. 9) Fix timestamping for GMAC3 chips in stmmac driver, from Mario Molitor. 10) Do not leak netdev on dev_alloc_name() errors in mac80211, from Johannes Berg. 11) Fix locking in sctp_for_each_endpoint(), from Xin Long. 12) Fix wrong memset size on 32-bit in snmp6, from Christian Perle. 13) Fix use after free in ip_mc_clear_src(), from WANG Cong. 14) Fix regressions caused by ICMP rate limiting changes in 4.11, from Jesper Dangaard Brouer. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (91 commits) i40e: Fix a sleep-in-atomic bug net: don't global ICMP rate limit packets originating from loopback net/act_pedit: fix an error code net: update undefined ->ndo_change_mtu() comment net_sched: move tcf_lock down after gen_replace_estimator() caif: Add sockaddr length check before accessing sa_family in connect handler qed: fix dump of context data qmi_wwan: new Telewell and Sierra device IDs net: phy: Fix MDIO_THUNDER dependencies netconsole: Remove duplicate "netconsole: " logging prefix igmp: acquire pmc lock for ip_mc_clear_src() r8152: give the device version net: rps: fix uninitialized symbol warning mac80211: don't send SMPS action frame in AP mode when not needed mac80211/wpa: use constant time memory comparison for MACs mac80211: set bss_info data before configuring the channel mac80211: remove 5/10 MHz rate code from station MLME mac80211: Fix incorrect condition when checking rx timestamp mac80211: don't look at the PM bit of BAR frames i40e: fix handling of HW ATR eviction ...
2017-06-15KVM: PPC: Book3S HV: Preserve userspace HTM state properlyPaul Mackerras1-0/+21
If userspace attempts to call the KVM_RUN ioctl when it has hardware transactional memory (HTM) enabled, the values that it has put in the HTM-related SPRs TFHAR, TFIAR and TEXASR will get overwritten by guest values. To fix this, we detect this condition and save those SPR values in the thread struct, and disable HTM for the task. If userspace goes to access those SPRs or the HTM facility in future, a TM-unavailable interrupt will occur and the handler will reload those SPRs and re-enable HTM. If userspace has started a transaction and suspended it, we would currently lose the transactional state in the guest entry path and would almost certainly get a "TM Bad Thing" interrupt, which would cause the host to crash. To avoid this, we detect this case and return from the KVM_RUN ioctl with an EINVAL error, with the KVM exit reason set to KVM_EXIT_FAIL_ENTRY. Fixes: b005255e12a3 ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08) Cc: stable@vger.kernel.org # v3.14+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-06-15KVM: PPC: Book3S HV: Restore critical SPRs to host values on guest exitPaul Mackerras2-3/+17
This restores several special-purpose registers (SPRs) to sane values on guest exit that were missed before. TAR and VRSAVE are readable and writable by userspace, and we need to save and restore them to prevent the guest from potentially affecting userspace execution (not that TAR or VRSAVE are used by any known program that run uses the KVM_RUN ioctl). We save/restore these in kvmppc_vcpu_run_hv() rather than on every guest entry/exit. FSCR affects userspace execution in that it can prohibit access to certain facilities by userspace. We restore it to the normal value for the task on exit from the KVM_RUN ioctl. IAMR is normally 0, and is restored to 0 on guest exit. However, with a radix host on POWER9, it is set to a value that prevents the kernel from executing user-accessible memory. On POWER9, we save IAMR on guest entry and restore it on guest exit to the saved value rather than 0. On POWER8 we continue to set it to 0 on guest exit. PSPB is normally 0. We restore it to 0 on guest exit to prevent userspace taking advantage of the guest having set it non-zero (which would allow userspace to set its SMT priority to high). UAMOR is normally 0. We restore it to 0 on guest exit to prevent the AMR from being used as a covert channel between userspace processes, since the AMR is not context-switched at present. Fixes: b005255e12a3 ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08) Cc: stable@vger.kernel.org # v3.14+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-06-14s390/ipl: revert Load Normal semantics for LPAR CCW-type re-IPLHeiko Carstens1-6/+1
This reverts the two commits 7afbeb6df2aa ("s390/ipl: always use load normal for CCW-type re-IPL") 0f7451ff3ab8 ("s390/ipl: use load normal for LPAR re-ipl") The two commits did not take into account that behavior of standby memory changes fundamentally if the re-IPL method is changed from Load Clear to Load Normal. In case of the old re-IPL clear method all memory that was initially in standby state will be put into standby state again within the re-IPL process. Or in other words: memory that was brought online before a re-IPL will be offline again after a reboot. Given that we use different re-IPL methods depending on the hypervisor and CCW-type vs SCSI re-IPL it is not easy to tell in advance when and why memory will stay online or will be offline after a re-IPL. This does also have other side effects, since memory that is online from the beginning will be in ZONE_NORMAL by default vs ZONE_MOVABLE for memory that is offline. Therefore, before the change, a user could online and offline memory easily since standby memory was always in ZONE_NORMAL. After the change, and a re-IPL, this depended on which memory parts were online before the re-IPL. From a usability point of view the current behavior is more than suboptimal. Therefore revert these changes until we have a better solution and get back to a consistent behavior. The bad thing about this is that the time required for a re-IPL will be significantly increased for configurations with several 100GB or 1TB of memory. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-06-14powerpc/npu-dma: Remove spurious WARN_ON when a PCI device has no of_nodeAlistair Popple1-1/+2
Commit 4c3b89effc28 ("powerpc/powernv: Add sanity checks to pnv_pci_get_{gpu|npu}_dev") introduced explicit warnings in pnv_pci_get_npu_dev() when a PCIe device has no associated device-tree node. However not all PCIe devices have an of_node and pnv_pci_get_npu_dev() gets indirectly called at least once for every PCIe device in the system. This results in spurious WARN_ON()'s so remove it. The same situation should not exist for pnv_pci_get_gpu_dev() as any NPU based PCIe device requires a device-tree node. Fixes: 4c3b89effc28 ("powerpc/powernv: Add sanity checks to pnv_pci_get_{gpu|npu}_dev") Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-13x86/mm: Disable 1GB direct mappings when disabling 2MB mappingsVlastimil Babka1-3/+3
The kmemleak and debug_pagealloc features both disable using huge pages for direct mappings so they can do cpa() on page level granularity in any context. However they only do that for 2MB pages, which means 1GB pages can still be used if the CPU supports it, unless disabled by a boot param, which is non-obvious. Disable also 1GB pages when disabling 2MB pages. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vegard Nossum <vegardno@ifi.uio.no> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/2be70c78-6130-855d-3dfa-d87bd1dd4fda@suse.cz Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-13Merge tag 'xtensa-20170612' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds7-20/+16
Pull Xtensa fixes from Max Filippov: - don't use linux IRQ #0 in legacy irq domains: fixes timer interrupt assignment when it's hardware IRQ # is 0 and the kernel is built w/o device tree support - reduce reservation size for double exception vector literals from 48 to 20 bytes: fixes build on cores with small user exception vector - cleanups: use kmalloc_array instead of kmalloc in simdisk_init and seq_puts instead of seq_printf in c_show. * tag 'xtensa-20170612' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: don't use linux IRQ #0 xtensa: reduce double exception literal reservation xtensa: ISS: Use kmalloc_array() in simdisk_init() xtensa: Use seq_puts() in c_show()
2017-06-13Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds6-27/+100
Pull s390 fixes from Martin Schwidefsky: - A fix for KVM to avoid kernel oopses in case of host protection faults due to runtime instrumentation - A fix for the AP bus to avoid dead devices after unbind / bind - A fix for a compile warning merged from the vfio_ccw tree - Updated default configurations * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: update defconfig s390/zcrypt: Fix blocking queue device after unbind/bind. s390/vfio_ccw: make some symbols static s390/kvm: do not rely on the ILC on kvm host protection fauls
2017-06-13KVM: PPC: Book3S HV: Context-switch EBB registers properlyPaul Mackerras1-0/+15
This adds code to save the values of three SPRs (special-purpose registers) used by userspace to control event-based branches (EBBs), which are essentially interrupts that get delivered directly to userspace. These registers are loaded up with guest values when entering the guest, and their values are saved when exiting the guest, but we were not saving the host values and restoring them before going back to userspace. On POWER8 this would only affect userspace programs which explicitly request the use of EBBs and also use the KVM_RUN ioctl, since the only source of EBBs on POWER8 is the PMU, and there is an explicit enable bit in the PMU registers (and those PMU registers do get properly context-switched between host and guest). On POWER9 there is provision for externally-generated EBBs, and these are not subject to the control in the PMU registers. Since these registers only affect userspace, we can save them when we first come in from userspace and restore them before returning to userspace, rather than saving/restoring the host values on every guest entry/exit. Similarly, we don't need to worry about their values on offline secondary threads since they execute in the context of the idle task, which never executes in userspace. Fixes: b005255e12a3 ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08) Cc: stable@vger.kernel.org # v3.14+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-06-12x86/debug: Handle early WARN_ONs properPeter Zijlstra3-1/+5
Hans managed to trigger a WARN very early in the boot which killed his (Virtual) box. The reason is that the recent rework of WARN() to use UD0 forgot to add the fixup_bug() call to early_fixup_exception(). As a result the kernel does not handle the WARN_ON injected UD0 exception and panics. Add the missing fixup call, so early UD's injected by WARN() get handled. Fixes: 9a93848fe787 ("x86/debug: Implement __WARN() using UD0") Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Frank Mehnert <frank.mehnert@oracle.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Michael Thayer <michael.thayer@oracle.com> Link: http://lkml.kernel.org/r/20170612180108.w4vgu2ckucmllf3a@hirez.programming.kicks-ass.net
2017-06-12ARM: 8682/1: V7M: Set cacheid iff DminLine or IminLine is nonzeroVladimir Murzin1-1/+1
Cache support is optional feature in M-class cores, thus DminLine or IminLine of Cache Type Register is zero if caches are not implemented, but we check the whole CTR which has other features encoded there. Let's be more precise and check for DminLine and IminLine of CTR before we set cacheid. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-06-12ARM: 8681/1: make VMSPLIT_3G_OPT depends on !ARM_LPAEYisheng Xie1-0/+1
When both enable CONFIG_ARM_LPAE=y and CONFIG_VMSPLIT_3G_OPT=y, which means use PAGE_OFFSET=0xB0000000 with ARM_LPAE, the kernel will boot fail and stop after uncompressed: Starting kernel ... Uart base = 0x20001000 watchdog reg = 0x20013000 dtb addr = 0x80840308 Uncompressing Linux... done, booting the kernel. For ARM_LPAE only support 3:1, 2:2, 1:3 split of TTBR1, which mention in: http://elinux.org/images/6/6a/Elce11_marinas.pdf - p16 So we should make VMSPLIT_3G_OPT depends on !ARM_LPAE to avoid trigger this bug. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-06-12ARM: 8680/1: boot/compressed: fix inappropriate Thumb2 mnemonic for __nopArd Biesheuvel1-1/+2
Commit 06a4b6d009a1 ("ARM: 8677/1: boot/compressed: fix decompressor header layout for v7-M") fixed an issue in the layout of the header of the compressed kernel image that was caused by the assembler emitting narrow opcodes for 'mov r0, r0', and for this reason, the mnemonic was updated to use the W() macro, which will append the .w suffix (which forces a wide encoding) if required, i.e., when building the kernel in Thumb2 mode. However, this failed to take into account that on Thumb2 kernels built for CPUs that are also ARM capable, the entry point is entered in ARM mode, and so the instructions emitted here will be ARM instructions that only exist in a wide encoding to begin with, which is why the assembler rejects the .w suffix here and aborts the build with the following message: head.S: Assembler messages: head.S:132: Error: width suffixes are invalid in ARM mode -- `mov.w r0,r0' So replace the W(mov) with separate ARM and Thumb2 instructions, where the latter will only be used for THUMB2_ONLY builds. Fixes: 06a4b6d009a1 ("ARM: 8677/1: boot/compressed: fix decompressor ...") Reported-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-06-11Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds5-19/+0
Pull key subsystem fixes from James Morris: "Here are a bunch of fixes for Linux keyrings, including: - Fix up the refcount handling now that key structs use the refcount_t type and the refcount_t ops don't allow a 0->1 transition. - Fix a potential NULL deref after error in x509_cert_parse(). - Don't put data for the crypto algorithms to use on the stack. - Fix the handling of a null payload being passed to add_key(). - Fix incorrect cleanup an uninitialised key_preparsed_payload in key_update(). - Explicit sanitisation of potentially secure data before freeing. - Fixes for the Diffie-Helman code" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (23 commits) KEYS: fix refcount_inc() on zero KEYS: Convert KEYCTL_DH_COMPUTE to use the crypto KPP API crypto : asymmetric_keys : verify_pefile:zero memory content before freeing KEYS: DH: add __user annotations to keyctl_kdf_params KEYS: DH: ensure the KDF counter is properly aligned KEYS: DH: don't feed uninitialized "otherinfo" into KDF KEYS: DH: forbid using digest_null as the KDF hash KEYS: sanitize key structs before freeing KEYS: trusted: sanitize all key material KEYS: encrypted: sanitize all key material KEYS: user_defined: sanitize key payloads KEYS: sanitize add_key() and keyctl() key payloads KEYS: fix freeing uninitialized memory in key_update() KEYS: fix dereferencing NULL payload with nonzero length KEYS: encrypted: use constant-time HMAC comparison KEYS: encrypted: fix race causing incorrect HMAC calculations KEYS: encrypted: fix buffer overread in valid_master_desc() KEYS: encrypted: avoid encrypting/decrypting stack buffers KEYS: put keyring if install_session_keyring_to_cred() fails KEYS: Delete an error message for a failed memory allocation in get_derived_key() ...
2017-06-11Merge tag 'hexagon-for-linus-v4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds1-3/+2
Pull hexagon fix from Guenter Roeck: "This fixes a build error seen when building hexagon images. Richard sent me an Ack, but didn't reply when asked if he wants me to send the patch to you directly, so I figured I'd just do it" * tag 'hexagon-for-linus-v4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hexagon: Use raw_copy_to_user
2017-06-11Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds13-32/+40
Pull KVM fixes from Paolo Bonzini: "Bug fixes (ARM, s390, x86)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: async_pf: avoid async pf injection when in guest mode KVM: cpuid: Fix read/write out-of-bounds vulnerability in cpuid emulation arm: KVM: Allow unaligned accesses at HYP arm64: KVM: Allow unaligned accesses at EL2 arm64: KVM: Preserve RES1 bits in SCTLR_EL2 KVM: arm/arm64: Handle possible NULL stage2 pud when ageing pages KVM: nVMX: Fix exception injection kvm: async_pf: fix rcu_irq_enter() with irqs enabled KVM: arm/arm64: vgic-v3: Fix nr_pre_bits bitfield extraction KVM: s390: fix ais handling vs cpu model KVM: arm/arm64: Fix isues with GICv2 on GICv3 migration