aboutsummaryrefslogtreecommitdiffstats
path: root/arch (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2008-01-28sh: r2d - enable sm501 usb host functionMagnus Damm1-0/+1
This patch tells the sm501 mfd driver to build platform data for the sm501 usb host driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: remove voyagergxMagnus Damm7-307/+39
This patch removes redundant irq handling code together with unused consistent alloc code. R2D uart setup code is changed to use sm501-regs.h and unused header files are removed. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: r2d - add lcd planel timings to sm501 platform dataMagnus Damm1-0/+45
This patch adds timings to drive a Sharp LQ104V1DG21 lcd panel that can be hooked up to R2D-1 or R2D-PLUS. The sm501fb driver should leave the pins FPEN and VBIASEN alone, and this patch instructs the driver to do so by not setting flags flags for these pins. This patch works best together with the patch posted to the linux-fbdev-devel list "sm501fb: control panel pin usage with platform data flags", but this patch can be merged independently. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add OHCI and UDC platform devices for SH7720.Yoshihiro Shimoda1-0/+53
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: intc - remove default interrupt priority tablesMagnus Damm18-144/+41
This patch removes interrupt priority tables from the intc code. Optimal priority assignment varies with embedded application anyway, so keeping the interrupt priority tables together with cpu-specific code doesn't make sense. The function intc_set_priority() should be used instead to set the desired interrupt priority level. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Correct pte size mismatch for X2 TLB.Paul Mundt1-1/+1
Fixes up a build warning/error in arch/sh/mm/fault_32.c. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Update SE7712 PCLK definition.Andrew Murray1-1/+1
This patch provides a correct value for CONFIG_SH_PCLK_FREQ for the SH7712 solution engine when used with the board's default factory settings. This results in the board running at its maximum CPU clock rate (200 MHz). Signed-off-by: Andrew Murray <amurray@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: sh7712 clock supportAndrew Murray2-0/+72
This patch provides specific clock support for the SH7712. Signed-off-by: Andrew Murray <amurray@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add support for SH7763 CPU subtype.Yoshihiro Shimoda11-7/+539
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add support for SH7721 CPU subtype.Yoshihiro Shimoda10-12/+37
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Provide a stubbed __set_fixmap() for nommu.Paul Mundt1-0/+4
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: arch/sh/: Spelling fixes.Joe Perches1-1/+1
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Fix up KERNEL_ENTRY calculation for uImage.Paul Mundt1-2/+3
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Stub in page_table_range_init() on nommu.Paul Mundt1-0/+6
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Use def_bool where possible.Harvey Harrison3-46/+34
Change occurances of: bool default X to: def_bool X Change ocurances of: bool "Foo" default X to: def_bool X prompt "Foo" Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Encode L1/L2 cache shape in auxvt.Paul Mundt2-1/+31
This adds in the L1I/L1D/L2 cache shape support to their respective entries in the ELF auxvt, based on the Alpha implementation. We use this on the userspace libc side for calculating a tightly packed SHMLBA amongst other things. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Support denormalization on SH-4 FPU.Stuart Menefy3-181/+1227
Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Fix up uImage target entry point.Thomas Betker1-4/+15
This patch changes the uImage target so that it generates a wrapped compressed vmlinux, rather than a wrapped zImage. The previous version matched the ARM, this version matches the PPC. However I would question how useful a self decompressing image is with a boot loader which does decompression, so I think this is more useful. I also feel it matches the descrition in the help text ("Compressed kernel image") better. Signed-off-by: Thomas Betker <thomas.betker@5etech.eu> Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Populate swapper_pg_dir with fixmap range.Stuart Menefy1-0/+36
This saves us from having to use kmalloc() for the fixmap entries, which is needed early for the uncached fixmap. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Clean up places that make 29-bit physical assumptions.Stuart Menefy3-3/+11
Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Preparation for uncached jumps through PMB.Stuart Menefy9-36/+61
Presently most of the 29-bit physical parts do P1/P2 segmentation with a 1:1 cached/uncached mapping, jumping between the two to control the caching behaviour. This provides the basic infrastructure to maintain this behaviour on 32-bit physical parts that don't map P1/P2 at all, using a shiny new linker section and corresponding fixmap entry. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Explicit alignment for PAGE_SIZE in copy/clear_page().Paul Mundt2-1/+4
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: GUSA atomic rollback support.Stuart Menefy5-58/+34
This implements kernel-level atomic rollback built on top of gUSA, as an alternative non-IRQ based atomicity method. This is generally a faster method for platforms that are lacking the LL/SC pairs that SH-4A and later use, and is only supportable on legacy cores. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Fix compile error of arch/sh/mm/pmb.cNobuhiro Iwamatsu1-1/+1
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: comment tidying for sh64->sh migration.Paul Mundt21-114/+87
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: syscall auditing for sh5, too.Paul Mundt2-18/+30
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Invalidate the TLB after applying PMB mappings.Stuart Menefy1-0/+6
Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Provide a 29/32-bit physical hint for bootloaders.Stuart Menefy1-1/+5
Shoves a magic word in to the empty_zero_page section for the bootloader to work out whether to start the kernel in 29-bit or 32-bit mode. [ Renesas CPUs already take care of the initial PMB mappings entirely in hardware and decide on 29-bit/32-bit physical depending on which pin powered up the CPU, so this is mostly for ST parts. -- PFM ]. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add a printk() to warn legacy mem= growers.Stuart Menefy1-0/+11
mem= can't be used to grow the size of kernel memory, so provide a warning to that effect. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: SH-2A FPU support.Paul Mundt8-29/+667
Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add SH7263 CPU support.Paul Mundt7-6/+55
This adds support for the SH7263 (SH-2A) CPU. This particular CPU is a superset of SH7203, adding some additional peripheral blocks and hooking up additional (reserved on SH7203) vectors in the INTC block. No visibly nasty surprises, yet.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Fix the arch/sh/kernel/traps.c build for sh32.Paul Mundt1-0/+2
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add SH7203 CPU support.Paul Mundt8-9/+393
This adds support for the SH7203 (SH-2A) CPU. Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: syscall audit support.Yuichi Nakamura2-6/+23
Support syscall auditing.. Signed-off-by: Yuichi Nakamura <ynakam@hitachisoft.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Move mach-cayman in with the rest of the boards.Paul Mundt7-5/+2
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Kill off the mach-harp and mach-sim machtypes.Paul Mundt11-1648/+294
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Build fixes for lib32 clear_page.Paul Mundt1-3/+3
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Fix up default zImage target for sh32.Paul Mundt1-1/+1
This was using the absolute path, which was confusing the make target. Switch it to just 'zImage', as per powerpc. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Bring the SH-5 FPU in line with the SH-4 FPU API.Paul Mundt5-16/+14
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Get the SH-5 PCI support building.Paul Mundt7-383/+271
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Kill off the rest of arch/sh64/kernel/.Paul Mundt13-1073/+8
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Get the mach-cayman IRQ support building.Paul Mundt8-152/+41
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: clear/copy_page renames in lib and lib64.Paul Mundt7-4/+4
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Rename the _32 and _64 TLB flush variants.Paul Mundt4-2/+2
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Consolidate sh/sh64 Makefiles.Paul Mundt2-117/+44
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Tidy up KBUILD_IMAGE for sh64.Paul Mundt1-17/+12
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Remove duplicate SUPERH64 symbol.Paul Mundt1-3/+0
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Generic BUG only works for sh32.Paul Mundt1-1/+1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Copy over special CFLAGS for SH-5 TLB miss.Paul Mundt1-0/+25
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Fix up user_fpu_struct typo for SH-5.Paul Mundt3-219/+0
Signed-off-by: Paul Mundt <lethal@linux-sh.org>