| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
blk_throtl_update_limit_valid() will search for descendants to see if
'LIMIT_LOW' of bps/iops and READ/WRITE is nonzero. However, they're always
zero if CONFIG_BLK_DEV_THROTTLING_LOW is not set, furthermore, a lot of
time will be wasted to iterate descendants.
Thus do nothing in blk_throtl_update_limit_valid() in such situation.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Re-use throtl_set_slice_end() to remove duplicate code.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The __throtl_de/enqueue_tg() functions are only be called by
throtl_de/enqueue_tg(), thus we can just open code them to
make code more readable.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The throtl_schedule_next_dispatch() will validate if the service queue
is empty before calling update_min_dispatch_time(), and the
update_min_dispatch_time() will call throtl_rb_first(), which will
validate service queue again.
Thus we can move the service queue validation out of the
throtl_rb_first() to remove the redundant validation in the fast path.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We should move the list operation after validation.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It can not scale up in throtl_adjusted_limit() if we set bps or iops is
1, which will cause IO hang when enable low limit. Thus we should treat
1 as a illegal value to avoid this issue.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The IO latency tracking is only for LOW limit, so we should add a
validation to avoid redundant latency tracking if the LOW limit
is not valid.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We only update the tg->last_finish_time when the low limitaion is
enabled, so we can move the tg->last_finish_time validation a little
forward to avoid getting the unnecessary current time stamp if the
the low limitation is not enabled.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The throtl_downgrade_state() is always used to change to LIMIT_LOW
limitation, thus remove the latter meaningless parameter which
indicates the limitation index.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Do not need check the bps or iops limitation if bps or iops is unlimited.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The tg_may_dispatch() will call tg_with_in_bps_limit() and
tg_with_in_iops_limit() to check if we can dispatch a bio or
not, which will calculate bps/iops limitation multiple times.
But tg_may_dispatch() is always called under queue lock, which
means the bps/iops limitation will not change in tg_may_dispatch().
So we can calculate the bps/iops limitation only once, and pass
them to tg_with_in_bps_limit() and tg_with_in_iops_limit() to
avoid calculating bps/iops limitation repeatedly.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The 'throtl_grp_quantum' and 'throtl_quantum' are both read-only
variables, thus better to use readable macros instead of static
variables, which can also save some spaces for .bss area.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use readable READ/WRITE macros instead of magic numbers.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix some comments' typos.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
generic_make_request has always been very confusingly misnamed, so rename
it to submit_bio_noacct to make it clear that it is submit_bio minus
accounting and a few checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bios must have a valid block group by the time they are submitted.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blkcg_bio_issue_check is a giant inline function that does three entirely
different things. Factor out the blk-cgroup related bio initalization
into a new helper, and the open code the sequence in the only caller,
relying on the fact that all the actual functionality is stubbed out for
non-cgroup builds.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The only thing in blkcg_bio_issue_check that needs to be under
rcu_read_lock is blk_throtl_bio, so move the locking there.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After blk_throtl_drain is removed, there is no caller of tg_drain_bios,
so remove it as well.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After the commit 5addeae1bedc4 ("blk-cgroup: remove blkcg_drain_queue"),
there is no caller of blk_throtl_drain, so let's remove it.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blkg_rwstat is now only used by bfq-iosched and blk-throtl when on
cgroup1. Let's move it into its own files and gate it behind a config
option.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When used on cgroup1, blk-throtl uses the blkg->stat_bytes and
->stat_ios from blk-cgroup core to populate four stat knobs.
blk-cgroup core is moving away from blkg_rwstat to improve scalability
and won't be able to support this usage.
It isn't like the sharing gains all that much. Let's break them out
to dedicated rwstat counters which are updated when on cgroup1.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently rq->data_len will be decreased by partial completion or
zeroed by completion, so when blk_stat_add() is invoked, data_len
will be zero and there will never be samples in poll_cb because
blk_mq_poll_stats_bkt() will return -1 if data_len is zero.
We could move blk_stat_add() back to __blk_mq_complete_request(),
but that would make the effort of trying to call ktime_get_ns()
once in vain. Instead we can reuse throtl_size field, and use
it for both block stats and block throttle, and adjust the
logic in blk_mq_poll_stats_bkt() accordingly.
Fixes: 4bc6339a583c ("block: move blk_stat_add() to __blk_mq_end_request()")
Tested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of @node, pass in @q and @blkcg so that the alloc function has
more context. This doesn't cause any behavior change and will be used
by io.weight implementation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After commit 991f61fe7e1d ("Blk-throttle: reduce tail io latency when
iops limit is enforced") wait time could be zero even if group is
throttled and cannot issue requests right now. As a result
throtl_select_dispatch() turns into busy-loop under irq-safe queue
spinlock.
Fix is simple: always round up target time to the next throttle slice.
Fixes: 991f61fe7e1d ("Blk-throttle: reduce tail io latency when iops limit is enforced")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit e99e88a9d2b0 renamed a function argument without updating the
corresponding kernel-doc header. Update the kernel-doc header.
Reviewed-by: Chaitanya Kulkarni <chiatanya.kulkarni@wdc.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Fixes: e99e88a9d2b0 ("treewide: setup_timer() -> timer_setup()") # v4.15.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bio_issue_init among other things initializes the timestamp for an IO.
Rather than have this logic handled by policies, this consolidates it to
be on the init paths (normal, clone, bounce clone).
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Previously, blkg association was handled by controller specific code in
blk-throttle and blk-iolatency. However, because a blkg represents a
relationship between a blkcg and a request_queue, it makes sense to keep
the blkg->q and bio->bi_disk->queue consistent.
This patch moves association into the bio_set_dev macro(). This should
cover the majority of cases where the device is set/changed keeping the
two pointers consistent. Fallback code is added to
blkcg_bio_issue_check() to catch any missing paths.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are 3 ways blkg association can happen: association with the
current css, with the page css (swap), or from the wbc css (writeback).
This patch handles how association is done for the first case where we
are associating bsaed on the current css. If there is already a blkg
associated, the css will be reused and association will be redone as the
request_queue may have changed.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are several scenarios where blkg_lookup_create() can fail such as
the blkcg dying, request_queue is dying, or simply being OOM. Most
handle this by simply falling back to the q->root_blkg and calling it a
day.
This patch implements the notion of closest blkg. During
blkg_lookup_create(), if it fails to create, return the closest blkg
found or the q->root_blkg. blkg_try_get_closest() is introduced and used
during association so a bio is always attached to a blkg.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Various spots check for q->mq_ops being non-NULL, but provide
a helper to do this instead.
Where the ->mq_ops != NULL check is redundant, remove it.
Since mq == rq-based now that legacy is gone, get rid of the
queue_is_rq_based() and just use queue_is_mq() everywhere.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With the legacy request path gone there is no good reason to keep
queue_lock as a pointer, we can always use the embedded lock now.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fixed floppy and blk-cgroup missing conversions and half done edits.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The only remaining user unconditionally drops and reacquires the lock,
which means we really don't need any additional (conditional) annotation.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Unused since the removal of the legacy request code.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts a series committed earlier due to null pointer exception
bug report in [1]. It seems there are edge case interactions that I did
not consider and will need some time to understand what causes the
adverse interactions.
The original series can be found in [2] with a follow up series in [3].
[1] https://www.spinics.net/lists/cgroups/msg20719.html
[2] https://lore.kernel.org/lkml/20180911184137.35897-1-dennisszhou@gmail.com/
[3] https://lore.kernel.org/lkml/20181020185612.51587-1-dennis@kernel.org/
This reverts the following commits:
d459d853c2ed, b2c3fa546705, 101246ec02b5, b3b9f24f5fcc, e2b0989954ae,
f0fcb3ec89f3, c839e7a03f92, bdc2491708c4, 74b7c02a9bc1, 5bf9a1f3b4ef,
a7b39b4e961c, 07b05bcc3213, 49f4c2dc2b50, 27e6fa996c53
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bio_issue_init among other things initializes the timestamp for an IO.
Rather than have this logic handled by policies, this consolidates it to
be on the init paths (normal, clone, bounce clone).
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Previously, blkg's were only assigned as needed by blk-iolatency and
blk-throttle. bio->css was also always being associated while blkg was
being looked up and then thrown away in blkcg_bio_issue_check.
This patch begins the cleanup of bio->css and bio->bi_blkg by always
associating a blkg in blkcg_bio_issue_check. This tries to create the
blkg, but if it is not possible, falls back to using the root_blkg of
the request_queue. Therefore, a bio will always be associated with a
blkg. The duplicate association logic is removed from blk-throttle and
blk-iolatency.
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As rbtree has native support of caching leftmost node,
i.e. rb_root_cached, no need to do the caching by ourselves.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is a very small change a bio gets caught up in a really
unfortunate race between a task migration, cgroup exiting, and itself
trying to associate with a blkg. This is due to css offlining being
performed after the css->refcnt is killed which triggers removal of
blkgs that reach their blkg->refcnt of 0.
To avoid this, association with a blkg should use tryget and fallback to
using the root_blkg.
Fixes: 08e18eab0c579 ("block: add bi_blkg to the bio for cgroups")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Cc: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When an application's iops has exceeded its cgroup's iops limit, surely it
is throttled and kernel will set a timer for dispatching, thus IO latency
includes the delay.
However, the dispatch delay which is calculated by the limit and the
elapsed jiffies is suboptimal. As the dispatch delay is only calculated
once the application's iops is (iops limit + 1), it doesn't need to wait
any longer than the remaining time of the current slice.
The difference can be proved by the following fio job and cgroup iops
setting,
-----
$ echo 4 > /mnt/config/nullb/disk1/mbps # limit nullb's bandwidth to 4MB/s for testing.
$ echo "253:1 riops=100 rbps=max" > /sys/fs/cgroup/unified/cg1/io.max
$ cat r2.job
[global]
name=fio-rand-read
filename=/dev/nullb1
rw=randread
bs=4k
direct=1
numjobs=1
time_based=1
runtime=60
group_reporting=1
[file1]
size=4G
ioengine=libaio
iodepth=1
rate_iops=50000
norandommap=1
thinktime=4ms
-----
wo patch:
file1: (g=0): rw=randread, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=libaio, iodepth=1
fio-3.7-66-gedfc
Starting 1 process
read: IOPS=99, BW=400KiB/s (410kB/s)(23.4MiB/60001msec)
slat (usec): min=10, max=336, avg=27.71, stdev=17.82
clat (usec): min=2, max=28887, avg=5929.81, stdev=7374.29
lat (usec): min=24, max=28901, avg=5958.73, stdev=7366.22
clat percentiles (usec):
| 1.00th=[ 4], 5.00th=[ 4], 10.00th=[ 4], 20.00th=[ 4],
| 30.00th=[ 4], 40.00th=[ 4], 50.00th=[ 6], 60.00th=[11731],
| 70.00th=[11863], 80.00th=[11994], 90.00th=[12911], 95.00th=[22676],
| 99.00th=[23725], 99.50th=[23987], 99.90th=[23987], 99.95th=[25035],
| 99.99th=[28967]
w/ patch:
file1: (g=0): rw=randread, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=libaio, iodepth=1
fio-3.7-66-gedfc
Starting 1 process
read: IOPS=100, BW=400KiB/s (410kB/s)(23.4MiB/60005msec)
slat (usec): min=10, max=155, avg=23.24, stdev=16.79
clat (usec): min=2, max=12393, avg=5961.58, stdev=5959.25
lat (usec): min=23, max=12412, avg=5985.91, stdev=5951.92
clat percentiles (usec):
| 1.00th=[ 3], 5.00th=[ 3], 10.00th=[ 4], 20.00th=[ 4],
| 30.00th=[ 4], 40.00th=[ 5], 50.00th=[ 47], 60.00th=[11863],
| 70.00th=[11994], 80.00th=[11994], 90.00th=[11994], 95.00th=[11994],
| 99.00th=[11994], 99.50th=[11994], 99.90th=[12125], 99.95th=[12125],
| 99.99th=[12387]
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently io.low uses a bi_cg_private to stash its private data for the
blkg, however other blkcg policies may want to use this as well. Since
we can get the private data out of the blkg, move this to bi_blkg in the
bio and make it generic, then we can use bio_associate_blkg() to attach
the blkg to the bio.
Theoretically we could simply replace the bi_css with this since we can
get to all the same information from the blkg, however you have to
lookup the blkg, so for example wbc_init_bio() would have to lookup and
possibly allocate the blkg for the css it was trying to attach to the
bio. This could be problematic and result in us either not attaching
the css at all to the bio, or falling back to the root blkcg if we are
unable to allocate the corresponding blkg.
So for now do this, and in the future if possible we could just replace
the bi_css with bi_blkg and update the helpers to do the correct
translation.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Once one cgroup has io.low configured, @low_valid becomes true and other
cgroups won't switch it back whatsoever.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Change to return true/false only for bool type return code.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
tg in throtl_select_dispatch is used first and then do check. Since tg
may be NULL, it has potential NULL pointer dereference risk. So fix
it.
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
struct blk_issue_stat squashes three things into one u64:
- The time the driver started working on a request
- The original size of the request (for the io.low controller)
- Flags for writeback throttling
It turns out that on x86_64, we have a 4 byte hole in struct request
which we can fill with the non-timestamp fields from blk_issue_stat,
simplifying things quite a bit.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
struct blk_issue_stat is going away, and bio->bi_issue_stat doesn't even
use the blk-stats interface, so we can provide a separate implementation
specific for bios. The helpers work the same way as the blk-stats
helpers.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block updates from Jens Axboe:
"This is the main pull request for block IO related changes for the
4.16 kernel. Nothing major in this pull request, but a good amount of
improvements and fixes all over the map. This contains:
- BFQ improvements, fixes, and cleanups from Angelo, Chiara, and
Paolo.
- Support for SMR zones for deadline and mq-deadline from Damien and
Christoph.
- Set of fixes for bcache by way of Michael Lyle, including fixes
from himself, Kent, Rui, Tang, and Coly.
- Series from Matias for lightnvm with fixes from Hans Holmberg,
Javier, and Matias. Mostly centered around pblk, and the removing
rrpc 1.2 in preparation for supporting 2.0.
- A couple of NVMe pull requests from Christoph. Nothing major in
here, just fixes and cleanups, and support for command tracing from
Johannes.
- Support for blk-throttle for tracking reads and writes separately.
From Joseph Qi. A few cleanups/fixes also for blk-throttle from
Weiping.
- Series from Mike Snitzer that enables dm to register its queue more
logically, something that's alwways been problematic on dm since
it's a stacked device.
- Series from Ming cleaning up some of the bio accessor use, in
preparation for supporting multipage bvecs.
- Various fixes from Ming closing up holes around queue mapping and
quiescing.
- BSD partition fix from Richard Narron, fixing a problem where we
can't mount newer (10/11) FreeBSD partitions.
- Series from Tejun reworking blk-mq timeout handling. The previous
scheme relied on atomic bits, but it had races where we would think
a request had timed out if it to reused at the wrong time.
- null_blk now supports faking timeouts, to enable us to better
exercise and test that functionality separately. From me.
- Kill the separate atomic poll bit in the request struct. After
this, we don't use the atomic bits on blk-mq anymore at all. From
me.
- sgl_alloc/free helpers from Bart.
- Heavily contended tag case scalability improvement from me.
- Various little fixes and cleanups from Arnd, Bart, Corentin,
Douglas, Eryu, Goldwyn, and myself"
* 'for-4.16/block' of git://git.kernel.dk/linux-block: (186 commits)
block: remove smart1,2.h
nvme: add tracepoint for nvme_complete_rq
nvme: add tracepoint for nvme_setup_cmd
nvme-pci: introduce RECONNECTING state to mark initializing procedure
nvme-rdma: remove redundant boolean for inline_data
nvme: don't free uuid pointer before printing it
nvme-pci: Suspend queues after deleting them
bsg: use pr_debug instead of hand crafted macros
blk-mq-debugfs: don't allow write on attributes with seq_operations set
nvme-pci: Fix queue double allocations
block: Set BIO_TRACE_COMPLETION on new bio during split
blk-throttle: use queue_is_rq_based
block: Remove kblockd_schedule_delayed_work{,_on}()
blk-mq: Avoid that blk_mq_delay_run_hw_queue() introduces unintended delays
blk-mq: Rename blk_mq_request_direct_issue() into blk_mq_request_issue_directly()
lib/scatterlist: Fix chaining support in sgl_alloc_order()
blk-throttle: track read and write request individually
block: add bdev_read_only() checks to common helpers
block: fail op_is_write() requests to read-only partitions
blk-throttle: export io_serviced_recursive, io_service_bytes_recursive
...
|
|
use queue_is_rq_based instead of open code.
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In mixed read/write workload on SSD, write latency is much lower than
read. But now we only track and record read latency and then use it as
threshold base for both read and write io latency accounting. As a
result, write io latency will always be considered as good and
bad_bio_cnt is much smaller than 20% of bio_cnt. That is to mean, the
tg to be checked will be treated as idle most of the time and still let
others dispatch more ios, even it is truly running under low limit and
wants its low limit to be guaranteed, which is not we expected in fact.
So track read and write request individually, which can bring more
precise latency control for low limit idle detection.
Signed-off-by: Joseph Qi <qijiang.qj@alibaba-inc.com>
Reviewed-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
export these two interface for cgroup-v1.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
Yu Kuai
Baolin Wang
Christoph Hellwig
Guoqing Jiang
Tejun Heo
Hou Tao
Konstantin Khlebnikov
Bart Van Assche
Dennis Zhou
Jens Axboe
Dennis Zhou (Facebook)
Liu Bo
Josef Bacik
Chengguang Xu
Omar Sandoval
Linus Torvalds
weiping zhang
Joseph Qi