| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Convert to the much saner new idr interface. Both bsg and genhd
protect idr w/ mutex making preloading unnecessary.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
idr allocation in blk_alloc_devt() wasn't synchronized against lookup
and removal, and its limit check was off by one - 1 << MINORBITS is
the number of minors allowed, not the maximum allowed minor.
Add locking and rename MAX_EXT_DEVT to NR_EXT_DEVT and fix limit
checking.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
While adding and removing a lot of disks disks and partitions this
sometimes shows up:
WARNING: at fs/sysfs/dir.c:512 sysfs_add_one+0xc9/0x130() (Not tainted)
Hardware name:
sysfs: cannot create duplicate filename '/dev/block/259:751'
Modules linked in: raid1 autofs4 bnx2fc cnic uio fcoe libfcoe libfc 8021q scsi_transport_fc scsi_tgt garp stp llc sunrpc cpufreq_ondemand powernow_k8 freq_table mperf ipv6 dm_mirror dm_region_hash dm_log power_meter microcode dcdbas serio_raw amd64_edac_mod edac_core edac_mce_amd i2c_piix4 i2c_core k10temp bnx2 sg ixgbe dca mdio ext4 mbcache jbd2 dm_round_robin sr_mod cdrom sd_mod crc_t10dif ata_generic pata_acpi pata_atiixp ahci mptsas mptscsih mptbase scsi_transport_sas dm_multipath dm_mod [last unloaded: scsi_wait_scan]
Pid: 44103, comm: async/16 Not tainted 2.6.32-195.el6.x86_64 #1
Call Trace:
warn_slowpath_common+0x87/0xc0
warn_slowpath_fmt+0x46/0x50
sysfs_add_one+0xc9/0x130
sysfs_do_create_link+0x12b/0x170
sysfs_create_link+0x13/0x20
device_add+0x317/0x650
idr_get_new+0x13/0x50
add_partition+0x21c/0x390
rescan_partitions+0x32b/0x470
sd_open+0x81/0x1f0 [sd_mod]
__blkdev_get+0x1b6/0x3c0
blkdev_get+0x10/0x20
register_disk+0x155/0x170
add_disk+0xa6/0x160
sd_probe_async+0x13b/0x210 [sd_mod]
add_wait_queue+0x46/0x60
async_thread+0x102/0x250
default_wake_function+0x0/0x20
async_thread+0x0/0x250
kthread+0x96/0xa0
child_rip+0xa/0x20
kthread+0x0/0xa0
child_rip+0x0/0x20
This most likely happens because dev_t is freed while the number is
still used and idr_get_new() is not protected on every use. The fix
adds a mutex where it wasn't before and moves the dev_t free function so
it is called after device del.
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Apply the introduced pm_runtime_set_memalloc_noio on block device so
that PM core will teach mm to not allocate memory with GFP_IOFS when
calling the runtime_resume and runtime_suspend callback for block
devices and its ancestors.
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Oliver Neukum <oneukum@suse.de>
Cc: Jiri Kosina <jiri.kosina@suse.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Decotigny <david.decotigny@google.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This provides a band-aid to provide stable page writes on jbd without
needing to backport the fixed locking and page writeback bit handling
schemes of jbd2. The band-aid works by using bounce buffers to snapshot
page contents instead of waiting.
For those wondering about the ext3 bandage -- fixing the jbd locking
(which was done as part of ext4dev years ago) is a lot of surgery, and
setting PG_writeback on data pages when we actually hold the page lock
dropped ext3 performance by nearly an order of magnitude. If we're
going to migrate iscsi and raid to use stable page writes, the
complaints about high latency will likely return. We might as well
centralize their page snapshotting thing to one place.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Tested-by: Andy Lutomirski <luto@amacapital.net>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patchset ("stable page writes, part 2") makes some key
modifications to the original 'stable page writes' patchset. First, it
provides creators (devices and filesystems) of a backing_dev_info a flag
that declares whether or not it is necessary to ensure that page
contents cannot change during writeout. It is no longer assumed that
this is true of all devices (which was never true anyway). Second, the
flag is used to relaxed the wait_on_page_writeback calls so that wait
only occurs if the device needs it. Third, it fixes up the remaining
disk-backed filesystems to use this improved conditional-wait logic to
provide stable page writes on those filesystems.
It is hoped that (for people not using checksumming devices, anyway)
this patchset will give back unnecessary performance decreases since the
original stable page write patchset went into 3.0. Sorry about not
fixing it sooner.
Complaints were registered by several people about the long write
latencies introduced by the original stable page write patchset.
Generally speaking, the kernel ought to allocate as little extra memory
as possible to facilitate writeout, but for people who simply cannot
wait, a second page stability strategy is (re)introduced: snapshotting
page contents. The waiting behavior is still the default strategy; to
enable page snapshotting, a superblock flag (MS_SNAP_STABLE) must be
set. This flag is used to bandaid^Henable stable page writeback on
ext3[1], and is not used anywhere else.
Given that there are already a few storage devices and network FSes that
have rolled their own page stability wait/page snapshot code, it would
be nice to move towards consolidating all of these. It seems possible
that iscsi and raid5 may wish to use the new stable page write support
to enable zero-copy writeout.
Thank you to Jan Kara for helping fix a couple more filesystems.
Per Andrew Morton's request, here are the result of using dbench to measure
latencies on ext2:
3.8.0-rc3:
Operation Count AvgLat MaxLat
----------------------------------------
WriteX 109347 0.028 59.817
ReadX 347180 0.004 3.391
Flush 15514 29.828 287.283
Throughput 57.429 MB/sec 4 clients 4 procs max_latency=287.290 ms
3.8.0-rc3 + patches:
WriteX 105556 0.029 4.273
ReadX 335004 0.005 4.112
Flush 14982 30.540 298.634
Throughput 55.4496 MB/sec 4 clients 4 procs max_latency=298.650 ms
As you can see, for ext2 the maximum write latency decreases from ~60ms
on a laptop hard disk to ~4ms. I'm not sure why the flush latencies
increase, though I suspect that being able to dirty pages faster gives
the flusher more work to do.
On ext4, the average write latency decreases as well as all the maximum
latencies:
3.8.0-rc3:
WriteX 85624 0.152 33.078
ReadX 272090 0.010 61.210
Flush 12129 36.219 168.260
Throughput 44.8618 MB/sec 4 clients 4 procs max_latency=168.276 ms
3.8.0-rc3 + patches:
WriteX 86082 0.141 30.928
ReadX 273358 0.010 36.124
Flush 12214 34.800 165.689
Throughput 44.9941 MB/sec 4 clients 4 procs max_latency=165.722 ms
XFS seems to exhibit similar latency improvements as ext2:
3.8.0-rc3:
WriteX 125739 0.028 104.343
ReadX 399070 0.005 4.115
Flush 17851 25.004 131.390
Throughput 66.0024 MB/sec 4 clients 4 procs max_latency=131.406 ms
3.8.0-rc3 + patches:
WriteX 123529 0.028 6.299
ReadX 392434 0.005 4.287
Flush 17549 25.120 188.687
Throughput 64.9113 MB/sec 4 clients 4 procs max_latency=188.704 ms
...and btrfs, just to round things out, also shows some latency
decreases:
3.8.0-rc3:
WriteX 67122 0.083 82.355
ReadX 212719 0.005 2.828
Flush 9547 47.561 147.418
Throughput 35.3391 MB/sec 4 clients 4 procs max_latency=147.433 ms
3.8.0-rc3 + patches:
WriteX 64898 0.101 71.631
ReadX 206673 0.005 7.123
Flush 9190 47.963 219.034
Throughput 34.0795 MB/sec 4 clients 4 procs max_latency=219.044 ms
Before this patchset, all filesystems would block, regardless of whether
or not it was necessary. ext3 would wait, but still generate occasional
checksum errors. The network filesystems were left to do their own
thing, so they'd wait too.
After this patchset, all the disk filesystems except ext3 and btrfs will
wait only if the hardware requires it. ext3 (if necessary) snapshots
pages instead of blocking, and btrfs provides its own bdi so the mm will
never wait. Network filesystems haven't been touched, so either they
provide their own wait code, or they don't block at all. The blocking
behavior is back to what it was before 3.0 if you don't have a disk
requiring stable page writes.
This patchset has been tested on 3.8.0-rc3 on x64 with ext3, ext4, and
xfs. I've spot-checked 3.8.0-rc4 and seem to be getting the same
results as -rc3.
[1] The alternative fixes to ext3 include fixing the locking order and
page bit handling like we did for ext4 (but then why not just use
ext4?), or setting PG_writeback so early that ext3 becomes extremely
slow. I tried that, but the number of write()s I could initiate dropped
by nearly an order of magnitude. That was a bit much even for the
author of the stable page series! :)
This patch:
Creates a per-backing-device flag that tracks whether or not pages must
be held immutable during writeout. Eventually it will be used to waive
wait_for_page_writeback() if nothing requires stable pages.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull async changes from Tejun Heo:
"These are followups for the earlier deadlock issue involving async
ending up waiting for itself through block requesting module[1]. The
following changes are made by these commits.
- Instead of requesting default elevator on each request_queue init,
block now requests it once early during boot.
- Kmod triggers warning if invoked from an async worker.
- Async synchronization implementation has been reimplemented. It's
a lot simpler now."
* 'for-3.9-async' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
async: initialise list heads to fix crash
async: replace list of active domains with global list of pending items
async: keep pending tasks on async_domain and remove async_pending
async: use ULLONG_MAX for infinity cookie value
async: bring sanity to the use of words domain and running
async, kmod: warn on synchronous request_module() from async workers
block: don't request module during elevator init
init, block: try to load default elevator module early during boot
|
|
Pull scheduler changes from Ingo Molnar:
"Main changes:
- scheduler side full-dynticks (user-space execution is undisturbed
and receives no timer IRQs) preparation changes that convert the
cputime accounting code to be full-dynticks ready, from Frederic
Weisbecker.
- Initial sched.h split-up changes, by Clark Williams
- select_idle_sibling() performance improvement by Mike Galbraith:
" 1 tbench pair (worst case) in a 10 core + SMT package:
pre 15.22 MB/sec 1 procs
post 252.01 MB/sec 1 procs "
- sched_rr_get_interval() ABI fix/change. We think this detail is not
used by apps (so it's not an ABI in practice), but lets keep it
under observation.
- misc RT scheduling cleanups, optimizations"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
sched/rt: Add <linux/sched/rt.h> header to <linux/init_task.h>
cputime: Remove irqsave from seqlock readers
sched, powerpc: Fix sched.h split-up build failure
cputime: Restore CPU_ACCOUNTING config defaults for PPC64
sched/rt: Move rt specific bits into new header file
sched/rt: Add a tuning knob to allow changing SCHED_RR timeslice
sched: Move sched.h sysctl bits into separate header
sched: Fix signedness bug in yield_to()
sched: Fix select_idle_sibling() bouncing cow syndrome
sched/rt: Further simplify pick_rt_task()
sched/rt: Do not account zero delta_exec in update_curr_rt()
cputime: Safely read cputime of full dynticks CPUs
kvm: Prepare to add generic guest entry/exit callbacks
cputime: Use accessors to read task cputime stats
cputime: Allow dynamic switch between tick/virtual based cputime accounting
cputime: Generic on-demand virtual cputime accounting
cputime: Move default nsecs_to_cputime() to jiffies based cputime file
cputime: Librarize per nsecs resolution cputime definitions
cputime: Avoid multiplication overflow on utime scaling
context_tracking: Export context state for generic vtime
...
Fix up conflict in kernel/context_tracking.c due to comment additions.
|
|
Move the sysctl-related bits from include/linux/sched.h into
a new file: include/linux/sched/sysctl.h. Then update source
files requiring access to those bits by including the new
header file.
Signed-off-by: Clark Williams <williams@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20130207094659.06dced96@riff.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Block layer allows selecting an elevator which is built as a module to
be selected as system default via kernel param "elevator=". This is
achieved by automatically invoking request_module() whenever a new
block device is initialized and the elevator is not available.
This led to an interesting deadlock problem involving async and module
init. Block device probing running off an async job invokes
request_module(). While the module is being loaded, it performs
async_synchronize_full() which ends up waiting for the async job which
is already waiting for request_module() to finish, leading to
deadlock.
Invoking request_module() from deep in block device init path is
already nasty in itself. It seems best to avoid these situations from
the beginning by moving on-demand module loading out of block init
path.
The previous patch made sure that the default elevator module is
loaded early during boot if available. This patch removes on-demand
loading of the default elevator from elevator init path. As the
module would have been loaded during boot, userland-visible behavior
difference should be minimal.
For more details, please refer to the following thread.
http://thread.gmane.org/gmane.linux.kernel/1420814
v2: The bool parameter was named @request_module which conflicted with
request_module(). This built okay w/ CONFIG_MODULES because
request_module() was defined as a macro. W/o CONFIG_MODULES, it
causes build breakage. Rename the parameter to @try_loading.
Reported by Fengguang.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alex Riesen <raa.lkml@gmail.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
|
|
This patch adds default module loading and uses it to load the default
block elevator. During boot, it's called right after initramfs or
initrd is made available and right before control is passed to
userland. This ensures that as long as the modules are available in
the usual places in initramfs, initrd or the root filesystem, the
default modules are loaded as soon as possible.
This will replace the on-demand elevator module loading from elevator
init path.
v2: Fixed build breakage when !CONFIG_BLOCK. Reported by kbuild test
robot.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alex Riesen <raa.lkml@gmail.com>
Cc: Fengguang We <fengguang.wu@intel.com>
|
|
Remove a race condition which causes a warning in disk_clear_events. This
is a race between disk_clear_events() and disk_flush_events().
ev->clearing will be altered by disk_flush_events() even though we are
blocking event checking through disk_flush_events(). If this happens
after ev->clearing was cleared for disk_clear_events(), this can cause the
WARN_ON_ONCE() in that function to be triggered.
This change also has disk_clear_events() not go through a workqueue.
Since we have to wait for the work to complete, we should just call the
function directly. Also, since this work cannot be put on a freezable
workqueue, it will have to contend with increased demand, so calling the
function directly avoids this.
[akpm@linux-foundation.org: fix spello in comment]
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Cc: Mandeep Singh Baines <msb@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In disk_clear_events, do not put work on system_nrt_freezable_wq.
Instead, put it on system_nrt_wq.
There is a race between probing a usb and suspending the device. Since
probing a usb calls disk_clear_events, which puts work on a frozen
workqueue, probing cannot finish after the workqueue is frozen. However,
suspending cannot finish until the usb probe is finished, so we get a
deadlock, causing the system to reboot.
The way to reproduce this bug is to wake up from suspend with a usb
storage device plugged in, or plugging in a usb storage device right
before suspend. The window of time is on the order of time it takes to
probe the usb device. As long as the workqueues are frozen before the
call to add_disk within sd_probe_async finishes, there will be a deadlock
(which calls blkdev_get, sd_open, check_disk_change, then
disk_clear_events). This is not difficult to reproduce after figuring out
the timings.
[akpm@linux-foundation.org: fix up comment]
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merge misc patches from Andrew Morton:
"Incoming:
- lots of misc stuff
- backlight tree updates
- lib/ updates
- Oleg's percpu-rwsem changes
- checkpatch
- rtc
- aoe
- more checkpoint/restart support
I still have a pile of MM stuff pending - Pekka should be merging
later today after which that is good to go. A number of other things
are twiddling thumbs awaiting maintainer merges."
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (180 commits)
scatterlist: don't BUG when we can trivially return a proper error.
docs: update documentation about /proc/<pid>/fdinfo/<fd> fanotify output
fs, fanotify: add @mflags field to fanotify output
docs: add documentation about /proc/<pid>/fdinfo/<fd> output
fs, notify: add procfs fdinfo helper
fs, exportfs: add exportfs_encode_inode_fh() helper
fs, exportfs: escape nil dereference if no s_export_op present
fs, epoll: add procfs fdinfo helper
fs, eventfd: add procfs fdinfo helper
procfs: add ability to plug in auxiliary fdinfo providers
tools/testing/selftests/kcmp/kcmp_test.c: print reason for failure in kcmp_test
breakpoint selftests: print failure status instead of cause make error
kcmp selftests: print fail status instead of cause make error
kcmp selftests: make run_tests fix
mem-hotplug selftests: print failure status instead of cause make error
cpu-hotplug selftests: print failure status instead of cause make error
mqueue selftests: print failure status instead of cause make error
vm selftests: print failure status instead of cause make error
ubifs: use prandom_bytes
mtd: nandsim: use prandom_bytes
...
|
|
Currently only block_dev and uprobes use percpu_rw_semaphore,
add the config option selected by BLOCK || UPROBES.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull block driver update from Jens Axboe:
"Now that the core bits are in, here are the driver bits for 3.8. The
branch contains:
- A huge pile of drbd bits that were dumped from the 3.7 merge
window. Following that, it was both made perfectly clear that
there is going to be no more over-the-wall pulls and how the
situation on individual pulls can be improved.
- A few cleanups from Akinobu Mita for drbd and cciss.
- Queue improvement for loop from Lukas. This grew into adding a
generic interface for waiting/checking an even with a specific
lock, allowing this to be pulled out of md and now loop and drbd is
also using it.
- A few fixes for xen back/front block driver from Roger Pau Monne.
- Partition improvements from Stephen Warren, allowing partiion UUID
to be used as an identifier."
* 'for-3.8/drivers' of git://git.kernel.dk/linux-block: (609 commits)
drbd: update Kconfig to match current dependencies
drbd: Fix drbdsetup wait-connect, wait-sync etc... commands
drbd: close race between drbd_set_role and drbd_connect
drbd: respect no-md-barriers setting also when changed online via disk-options
drbd: Remove obsolete check
drbd: fixup after wait_even_lock_irq() addition to generic code
loop: Limit the number of requests in the bio list
wait: add wait_event_lock_irq() interface
xen-blkfront: free allocated page
xen-blkback: move free persistent grants code
block: partition: msdos: provide UUIDs for partitions
init: reduce PARTUUID min length to 1 from 36
block: store partition_meta_info.uuid as a string
cciss: use check_signature()
cciss: cleanup bitops usage
drbd: use copy_highpage
drbd: if the replication link breaks during handshake, keep retrying
drbd: check return of kmalloc in receive_uuids
drbd: Broadcast sync progress no more often than once per second
drbd: don't try to clear bits once the disk has failed
...
|
|
Pull block layer core updates from Jens Axboe:
"Here are the core block IO bits for 3.8. The branch contains:
- The final version of the surprise device removal fixups from Bart.
- Don't hide EFI partitions under advanced partition types. It's
fairly wide spread these days. This is especially dangerous for
systems that have both msdos and efi partition tables, where you
want to keep them in sync.
- Cleanup of using -1 instead of the proper NUMA_NO_NODE
- Export control of bdi flusher thread CPU mask and default to using
the home node (if known) from Jeff.
- Export unplug tracepoint for MD.
- Core improvements from Shaohua. Reinstate the recursive merge, as
the original bug has been fixed. Add plugging for discard and also
fix a problem handling non pow-of-2 discard limits.
There's a trivial merge in block/blk-exec.c due to a fix that went
into 3.7-rc at a later point than -rc4 where this is based."
* 'for-3.8/core' of git://git.kernel.dk/linux-block:
block: export block_unplug tracepoint
block: add plug for blkdev_issue_discard
block: discard granularity might not be power of 2
deadline: Allow 0ms deadline latency, increase the read speed
partitions: enable EFI/GPT support by default
bsg: Remove unused function bsg_goose_queue()
block: Make blk_cleanup_queue() wait until request_fn finished
block: Avoid scheduling delayed work on a dead queue
block: Avoid that request_fn is invoked on a dead queue
block: Let blk_drain_queue() caller obtain the queue lock
block: Rename queue dead flag
bdi: add a user-tunable cpu_list for the bdi flusher threads
block: use NUMA_NO_NODE instead of -1
block: recursive merge requests
block CFQ: avoid moving request to different queue
|
|
This allows stacked devices (like md/raid5) to provide blktrace
tracing, including unplug events.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Last post of this patch appears lost, so I resend this.
Now discard merge works, add plug for blkdev_issue_discard. This will help
discard request merge especially for raid0 case. In raid0, a big discard
request is split to small requests, and if correct plug is added, such small
requests can be merged in low layer.
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In MD raid case, discard granularity might not be power of 2, for example, a
4-disk raid5 has 3*chunk_size discard granularity. Correct the calculation for
such cases.
Reported-by: Neil Brown <neilb@suse.de>
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull cgroup changes from Tejun Heo:
"A lot of activities on cgroup side. The big changes are focused on
making cgroup hierarchy handling saner.
- cgroup_rmdir() had peculiar semantics - it allowed cgroup
destruction to be vetoed by individual controllers and tried to
drain refcnt synchronously. The vetoing never worked properly and
caused good deal of contortions in cgroup. memcg was the last
reamining user. Michal Hocko removed the usage and cgroup_rmdir()
path has been simplified significantly. This was done in a
separate branch so that the memcg people can base further memcg
changes on top.
- The above allowed cleaning up cgroup lifecycle management and
implementation of generic cgroup iterators which are used to
improve hierarchy support.
- cgroup_freezer updated to allow migration in and out of a frozen
cgroup and handle hierarchy. If a cgroup is frozen, all descendant
cgroups are frozen.
- netcls_cgroup and netprio_cgroup updated to handle hierarchy
properly.
- Various fixes and cleanups.
- Two merge commits. One to pull in memcg and rmdir cleanups (needed
to build iterators). The other pulled in cgroup/for-3.7-fixes for
device_cgroup fixes so that further device_cgroup patches can be
stacked on top."
Fixed up a trivial conflict in mm/memcontrol.c as per Tejun (due to
commit bea8c150a7 ("memcg: fix hotplugged memory zone oops") in master
touching code close to commit 2ef37d3fe4 ("memcg: Simplify
mem_cgroup_force_empty_list error handling") in for-3.8)
* 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (65 commits)
cgroup: update Documentation/cgroups/00-INDEX
cgroup_rm_file: don't delete the uncreated files
cgroup: remove subsystem files when remounting cgroup
cgroup: use cgroup_addrm_files() in cgroup_clear_directory()
cgroup: warn about broken hierarchies only after css_online
cgroup: list_del_init() on removed events
cgroup: fix lockdep warning for event_control
cgroup: move list add after list head initilization
netprio_cgroup: allow nesting and inherit config on cgroup creation
netprio_cgroup: implement netprio[_set]_prio() helpers
netprio_cgroup: use cgroup->id instead of cgroup_netprio_state->prioidx
netprio_cgroup: reimplement priomap expansion
netprio_cgroup: shorten variable names in extend_netdev_table()
netprio_cgroup: simplify write_priomap()
netcls_cgroup: move config inheritance to ->css_online() and remove .broken_hierarchy marking
cgroup: remove obsolete guarantee from cgroup_task_migrate.
cgroup: add cgroup->id
cgroup, cpuset: remove cgroup_subsys->post_clone()
cgroup: s/CGRP_CLONE_CHILDREN/CGRP_CPUSET_CLONE_CHILDREN/
cgroup: rename ->create/post_create/pre_destroy/destroy() to ->css_alloc/online/offline/free()
...
|
|
Change a timer compare from after to after-equals, thus allowing
0 timeout and making deadline schedule FIFO.
Signed-off-by: xiaobing tu <xiaobing.tu@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The Kconfig currently enables MSDOS partitions by default because they
are assumed to be essential, but it's necessary to enable "advanced
partition selection" in order to get GPT support. IMO GPT partitions
are becoming common enought to deserve the same treatment MSDOS
partitions get.
(Side note: I got bit by a disk that had MSDOS and GPT partition
tables, but for some reason the MSDOS table was different from the
GPT one. I was stupid enought to disable "advanced partition
selection" in my .config, which disabled GPT partitioning and made
my btrfs pool unbootable because it couldn't find the partitions)
Signed-off-by: Diego Calleja <diegocg@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The function bsg_goose_queue() does not have any in-tree callers,
so let's remove it.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some request_fn implementations, e.g. scsi_request_fn(), unlock
the queue lock internally. This may result in multiple threads
executing request_fn for the same queue simultaneously. Keep
track of the number of active request_fn calls and make sure that
blk_cleanup_queue() waits until all active request_fn invocations
have finished. A block driver may start cleaning up resources
needed by its request_fn as soon as blk_cleanup_queue() finished,
so blk_cleanup_queue() must wait for all outstanding request_fn
invocations to finish.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reported-by: Chanho Min <chanho.min@lge.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Running a queue must continue after it has been marked dying until
it has been marked dead. So the function blk_run_queue_async() must
not schedule delayed work after blk_cleanup_queue() has marked a queue
dead. Hence add a test for that queue state in blk_run_queue_async()
and make sure that queue_unplugged() invokes that function with the
queue lock held. This avoids that the queue state can change after
it has been tested and before mod_delayed_work() is invoked. Drop
the queue dying test in queue_unplugged() since it is now
superfluous: __blk_run_queue() already tests whether or not the
queue is dead.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A block driver may start cleaning up resources needed by its
request_fn as soon as blk_cleanup_queue() finished, so request_fn
must not be invoked after draining finished. This is important
when blk_run_queue() is invoked without any requests in progress.
As an example, if blk_drain_queue() and scsi_run_queue() run in
parallel, blk_drain_queue() may have finished all requests after
scsi_run_queue() has taken a SCSI device off the starved list but
before that last function has had a chance to run the queue.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Chanho Min <chanho.min@lge.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Let the caller of blk_drain_queue() obtain the queue lock to improve
readability of the patch called "Avoid that request_fn is invoked on
a dead queue".
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Chanho Min <chanho.min@lge.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
QUEUE_FLAG_DEAD is used to indicate that queuing new requests must
stop. After this flag has been set queue draining starts. However,
during the queue draining phase it is still safe to invoke the
queue's request_fn, so QUEUE_FLAG_DYING is a better name for this
flag.
This patch has been generated by running the following command
over the kernel source tree:
git grep -lEw 'blk_queue_dead|QUEUE_FLAG_DEAD' |
xargs sed -i.tmp -e 's/blk_queue_dead/blk_queue_dying/g' \
-e 's/QUEUE_FLAG_DEAD/QUEUE_FLAG_DYING/g'; \
sed -i.tmp -e "s/QUEUE_FLAG_DYING$(printf \\t)*5/QUEUE_FLAG_DYING$(printf \\t)5/g" \
include/linux/blkdev.h; \
sed -i.tmp -e 's/ DEAD/ DYING/g' -e 's/dead queue/a dying queue/' \
-e 's/Dead queue/A dying queue/' block/blk-core.c
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Chanho Min <chanho.min@lge.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After we've done __elv_add_request() and __blk_run_queue() in
blk_execute_rq_nowait(), the request might finish and be freed
immediately. Therefore checking if the type is REQ_TYPE_PM_RESUME
isn't safe afterwards, because if it isn't, rq might be gone.
Instead, check beforehand and stash the result in a temporary.
This fixes crashes in blk_execute_rq_nowait() I get occasionally when
running with lots of memory debugging options enabled -- I think this
race is usually harmless because the window for rq to be reallocated
is so small.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The MSDOS/MBR partition table includes a 32-bit unique ID, often referred
to as the NT disk signature. When combined with a partition number within
the table, this can form a unique ID similar in concept to EFI/GPT's
partition UUID. Constructing and recording this value in struct
partition_meta_info allows MSDOS partitions to be referred to on the
kernel command-line using the following syntax:
root=PARTUUID=0002dd75-01
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This will allow other types of UUID to be stored here, aside from true
UUIDs. This also simplifies code that uses this field, since it's usually
constructed from a, used as a, or compared to other, strings.
Note: A simplistic approach here would be to set uuid_str[36]=0 whenever a
/PARTNROFF option was found to be present. However, this modifies the
input string, and causes subsequent calls to devt_from_partuuid() not to
see the /PARTNROFF option, which causes different results. In order to
avoid misleading future maintainers, this parameter is marked const.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Rename cgroup_subsys css lifetime related callbacks to better describe
what their roles are. Also, update documentation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
|
|
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Modified by me to cover blk_init_queue() as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In a workload, thread 1 accesses a, a+2, ..., thread 2 accesses a+1, a+3,....
When the requests are flushed to queue, a and a+1 are merged to (a, a+1), a+2
and a+3 too to (a+2, a+3), but (a, a+1) and (a+2, a+3) aren't merged.
If we do recursive merge for such interleave access, some workloads throughput
get improvement. A recent worload I'm checking on is swap, below change
boostes the throughput around 5% ~ 10%.
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is to receive device_cgroup fixes so that further device_cgroup
changes can be made in cgroup/for-3.8.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
request is queued in cfqq->fifo list. Looks it's possible we are moving a
request from one cfqq to another in request merge case. In such case, adjusting
the fifo list order doesn't make sense and is impossible if we don't iterate
the whole fifo list.
My test does hit one case the two cfqq are different, but didn't cause kernel
crash, maybe it's because fifo list isn't used frequently. Anyway, from the
code logic, this is buggy.
I thought we can re-enable the recusive merge logic after this is fixed.
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull rmdir updates into for-3.8 so that further callback updates can
be put on top. This pull created a trivial conflict between the
following two commits.
8c7f6edbda ("cgroup: mark subsystems with broken hierarchy support and whine if cgroups are nested for them")
ed95779340 ("cgroup: kill cgroup_subsys->__DEPRECATED_clear_css_refs")
The former added a field to cgroup_subsys and the latter removed one
from it. They happen to be colocated causing the conflict. Keeping
what's added and removing what's removed resolves the conflict.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
All ->pre_destory() implementations return 0 now, which is the only
allowed return value. Make it return void.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
|
|
My workload is a raid5 which had 16 disks. And used our filesystem to
write using direct-io mode.
I used the blktrace to find those message:
8,16 0 6647 2.453665504 2579 M W 7493152 + 8 [md0_raid5]
8,16 0 6648 2.453672411 2579 Q W 7493160 + 8 [md0_raid5]
8,16 0 6649 2.453672606 2579 M W 7493160 + 8 [md0_raid5]
8,16 0 6650 2.453679255 2579 Q W 7493168 + 8 [md0_raid5]
8,16 0 6651 2.453679441 2579 M W 7493168 + 8 [md0_raid5]
8,16 0 6652 2.453685948 2579 Q W 7493176 + 8 [md0_raid5]
8,16 0 6653 2.453686149 2579 M W 7493176 + 8 [md0_raid5]
8,16 0 6654 2.453693074 2579 Q W 7493184 + 8 [md0_raid5]
8,16 0 6655 2.453693254 2579 M W 7493184 + 8 [md0_raid5]
8,16 0 6656 2.453704290 2579 Q W 7493192 + 8 [md0_raid5]
8,16 0 6657 2.453704482 2579 M W 7493192 + 8 [md0_raid5]
8,16 0 6658 2.453715016 2579 Q W 7493200 + 8 [md0_raid5]
8,16 0 6659 2.453715247 2579 M W 7493200 + 8 [md0_raid5]
8,16 0 6660 2.453721730 2579 Q W 7493208 + 8 [md0_raid5]
8,16 0 6661 2.453721974 2579 M W 7493208 + 8 [md0_raid5]
8,16 0 6662 2.453728202 2579 Q W 7493216 + 8 [md0_raid5]
8,16 0 6663 2.453728436 2579 M W 7493216 + 8 [md0_raid5]
8,16 0 6664 2.453734782 2579 Q W 7493224 + 8 [md0_raid5]
8,16 0 6665 2.453735019 2579 M W 7493224 + 8 [md0_raid5]
8,16 0 6666 2.453741401 2579 Q W 7493232 + 8 [md0_raid5]
8,16 0 6667 2.453741632 2579 M W 7493232 + 8 [md0_raid5]
8,16 0 6668 2.453748148 2579 Q W 7493240 + 8 [md0_raid5]
8,16 0 6669 2.453748386 2579 M W 7493240 + 8 [md0_raid5]
8,16 0 6670 2.453851843 2579 I W 7493144 + 104 [md0_raid5]
8,16 0 0 2.453853661 0 m N cfq2579 insert_request
8,16 0 6671 2.453854064 2579 I W 7493120 + 24 [md0_raid5]
8,16 0 0 2.453854439 0 m N cfq2579 insert_request
8,16 0 6672 2.453854793 2579 U N [md0_raid5] 2
8,16 0 0 2.453855513 0 m N cfq2579 Not idling.st->count:1
8,16 0 0 2.453855927 0 m N cfq2579 dispatch_insert
8,16 0 0 2.453861771 0 m N cfq2579 dispatched a request
8,16 0 0 2.453862248 0 m N cfq2579 activate rq,drv=1
8,16 0 6673 2.453862332 2579 D W 7493120 + 24 [md0_raid5]
8,16 0 0 2.453865957 0 m N cfq2579 Not idling.st->count:1
8,16 0 0 2.453866269 0 m N cfq2579 dispatch_insert
8,16 0 0 2.453866707 0 m N cfq2579 dispatched a request
8,16 0 0 2.453867061 0 m N cfq2579 activate rq,drv=2
8,16 0 6674 2.453867145 2579 D W 7493144 + 104 [md0_raid5]
8,16 0 6675 2.454147608 0 C W 7493120 + 24 [0]
8,16 0 0 2.454149357 0 m N cfq2579 complete rqnoidle 0
8,16 0 6676 2.454791505 0 C W 7493144 + 104 [0]
8,16 0 0 2.454794803 0 m N cfq2579 complete rqnoidle 0
8,16 0 0 2.454795160 0 m N cfq schedule dispatch
From above messages,we can find rq[W 7493144 + 104] and rq[W
7493120 + 24] do not merge.
Because the bio order is:
8,16 0 6638 2.453619407 2579 Q W 7493144 + 8 [md0_raid5]
8,16 0 6639 2.453620460 2579 G W 7493144 + 8 [md0_raid5]
8,16 0 6640 2.453639311 2579 Q W 7493120 + 8 [md0_raid5]
8,16 0 6641 2.453639842 2579 G W 7493120 + 8 [md0_raid5]
The bio(7493144) first and bio(7493120) later.So the subsequent
bios will be divided into two parts.
When flushing plug-list,because elv_attempt_insert_merge only support
backmerge,not supporting frontmerge.
So rq[7493120 + 24] can't merge with rq[7493144 + 104].
From my test,i found those situation can count 25% in our system.
Using this patch, there is no this situation.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
CC:Shaohua Li <shli@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.
CC: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
__blk_queue_next_rl() finds next request list based on blkg_list
while skipping root_blkg in the list.
OTOH, root_rl is special as it may exist even without root_blkg.
Though the later part of the function handles such a case correctly,
exiting early is good for readability of the code.
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_put_rl() does not call blkg_put() for q->root_rl because we
don't take request list reference on q->root_blkg.
However, if root_blkg is once attached then detached (freed),
blk_put_rl() is confused by the bogus pointer in q->root_blkg.
For example, with !CONFIG_BLK_DEV_THROTTLING &&
CONFIG_CFQ_GROUP_IOSCHED,
switching IO scheduler from cfq to deadline will cause system stall
after the following warning with 3.6:
> WARNING: at /work/build/linux/block/blk-cgroup.h:250
> blk_put_rl+0x4d/0x95()
> Modules linked in: bridge stp llc sunrpc acpi_cpufreq freq_table mperf
> ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4
> Pid: 0, comm: swapper/0 Not tainted 3.6.0 #1
> Call Trace:
> <IRQ> [<ffffffff810453bd>] warn_slowpath_common+0x85/0x9d
> [<ffffffff810453ef>] warn_slowpath_null+0x1a/0x1c
> [<ffffffff811d5f8d>] blk_put_rl+0x4d/0x95
> [<ffffffff811d614a>] __blk_put_request+0xc3/0xcb
> [<ffffffff811d71a3>] blk_finish_request+0x232/0x23f
> [<ffffffff811d76c3>] ? blk_end_bidi_request+0x34/0x5d
> [<ffffffff811d76d1>] blk_end_bidi_request+0x42/0x5d
> [<ffffffff811d7728>] blk_end_request+0x10/0x12
> [<ffffffff812cdf16>] scsi_io_completion+0x207/0x4d5
> [<ffffffff812c6fcf>] scsi_finish_command+0xfa/0x103
> [<ffffffff812ce2f8>] scsi_softirq_done+0xff/0x108
> [<ffffffff811dcea5>] blk_done_softirq+0x8d/0xa1
> [<ffffffff810915d5>] ?
> generic_smp_call_function_single_interrupt+0x9f/0xd7
> [<ffffffff8104cf5b>] __do_softirq+0x102/0x213
> [<ffffffff8108a5ec>] ? lock_release_holdtime+0xb6/0xbb
> [<ffffffff8104d2b4>] ? raise_softirq_irqoff+0x9/0x3d
> [<ffffffff81424dfc>] call_softirq+0x1c/0x30
> [<ffffffff81011beb>] do_softirq+0x4b/0xa3
> [<ffffffff8104cdb0>] irq_exit+0x53/0xd5
> [<ffffffff8102d865>] smp_call_function_single_interrupt+0x34/0x36
> [<ffffffff8142486f>] call_function_single_interrupt+0x6f/0x80
> <EOI> [<ffffffff8101800b>] ? mwait_idle+0x94/0xcd
> [<ffffffff81018002>] ? mwait_idle+0x8b/0xcd
> [<ffffffff81017811>] cpu_idle+0xbb/0x114
> [<ffffffff81401fbd>] rest_init+0xc1/0xc8
> [<ffffffff81401efc>] ? csum_partial_copy_generic+0x16c/0x16c
> [<ffffffff81cdbd3d>] start_kernel+0x3d4/0x3e1
> [<ffffffff81cdb79e>] ? kernel_init+0x1f7/0x1f7
> [<ffffffff81cdb2dd>] x86_64_start_reservations+0xb8/0xbd
> [<ffffffff81cdb3e3>] x86_64_start_kernel+0x101/0x110
This patch clears q->root_blkg and q->root_rl.blkg when root blkg
is destroyed.
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block IO update from Jens Axboe:
"Core block IO bits for 3.7. Not a huge round this time, it contains:
- First series from Kent cleaning up and generalizing bio allocation
and freeing.
- WRITE_SAME support from Martin.
- Mikulas patches to prevent O_DIRECT crashes when someone changes
the block size of a device.
- Make bio_split() work on data-less bio's (like trim/discards).
- A few other minor fixups."
Fixed up silent semantic mis-merge as per Mikulas Patocka and Andrew
Morton. It is due to the VM no longer using a prio-tree (see commit
6b2dbba8b6ac: "mm: replace vma prio_tree with an interval tree").
So make set_blocksize() use mapping_mapped() instead of open-coding the
internal VM knowledge that has changed.
* 'for-3.7/core' of git://git.kernel.dk/linux-block: (26 commits)
block: makes bio_split support bio without data
scatterlist: refactor the sg_nents
scatterlist: add sg_nents
fs: fix include/percpu-rwsem.h export error
percpu-rw-semaphore: fix documentation typos
fs/block_dev.c:1644:5: sparse: symbol 'blkdev_mmap' was not declared
blockdev: turn a rw semaphore into a percpu rw semaphore
Fix a crash when block device is read and block size is changed at the same time
block: fix request_queue->flags initialization
block: lift the initial queue bypass mode on blk_register_queue() instead of blk_init_allocated_queue()
block: ioctl to zero block ranges
block: Make blkdev_issue_zeroout use WRITE SAME
block: Implement support for WRITE SAME
block: Consolidate command flag and queue limit checks for merges
block: Clean up special command handling logic
block/blk-tag.c: Remove useless kfree
block: remove the duplicated setting for congestion_threshold
block: reject invalid queue attribute values
block: Add bio_clone_bioset(), bio_clone_kmalloc()
block: Consolidate bio_alloc_bioset(), bio_kmalloc()
...
|
|
Pull cgroup hierarchy update from Tejun Heo:
"Currently, different cgroup subsystems handle nested cgroups
completely differently. There's no consistency among subsystems and
the behaviors often are outright broken.
People at least seem to agree that the broken hierarhcy behaviors need
to be weeded out if any progress is gonna be made on this front and
that the fallouts from deprecating the broken behaviors should be
acceptable especially given that the current behaviors don't make much
sense when nested.
This patch makes cgroup emit warning messages if cgroups for
subsystems with broken hierarchy behavior are nested to prepare for
fixing them in the future. This was put in a separate branch because
more related changes were expected (didn't make it this round) and the
memory cgroup wanted to pull in this and make changes on top."
* 'for-3.7-hierarchy' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: mark subsystems with broken hierarchy support and whine if cgroups are nested for them
|
|
Pull workqueue changes from Tejun Heo:
"This is workqueue updates for v3.7-rc1. A lot of activities this
round including considerable API and behavior cleanups.
* delayed_work combines a timer and a work item. The handling of the
timer part has always been a bit clunky leading to confusing
cancelation API with weird corner-case behaviors. delayed_work is
updated to use new IRQ safe timer and cancelation now works as
expected.
* Another deficiency of delayed_work was lack of the counterpart of
mod_timer() which led to cancel+queue combinations or open-coded
timer+work usages. mod_delayed_work[_on]() are added.
These two delayed_work changes make delayed_work provide interface
and behave like timer which is executed with process context.
* A work item could be executed concurrently on multiple CPUs, which
is rather unintuitive and made flush_work() behavior confusing and
half-broken under certain circumstances. This problem doesn't
exist for non-reentrant workqueues. While non-reentrancy check
isn't free, the overhead is incurred only when a work item bounces
across different CPUs and even in simulated pathological scenario
the overhead isn't too high.
All workqueues are made non-reentrant. This removes the
distinction between flush_[delayed_]work() and
flush_[delayed_]_work_sync(). The former is now as strong as the
latter and the specified work item is guaranteed to have finished
execution of any previous queueing on return.
* In addition to the various bug fixes, Lai redid and simplified CPU
hotplug handling significantly.
* Joonsoo introduced system_highpri_wq and used it during CPU
hotplug.
There are two merge commits - one to pull in IRQ safe timer from
tip/timers/core and the other to pull in CPU hotplug fixes from
wq/for-3.6-fixes as Lai's hotplug restructuring depended on them."
Fixed a number of trivial conflicts, but the more interesting conflicts
were silent ones where the deprecated interfaces had been used by new
code in the merge window, and thus didn't cause any real data conflicts.
Tejun pointed out a few of them, I fixed a couple more.
* 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits)
workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending()
workqueue: use cwq_set_max_active() helper for workqueue_set_max_active()
workqueue: introduce cwq_set_max_active() helper for thaw_workqueues()
workqueue: remove @delayed from cwq_dec_nr_in_flight()
workqueue: fix possible stall on try_to_grab_pending() of a delayed work item
workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback()
workqueue: use __cpuinit instead of __devinit for cpu callbacks
workqueue: rename manager_mutex to assoc_mutex
workqueue: WORKER_REBIND is no longer necessary for idle rebinding
workqueue: WORKER_REBIND is no longer necessary for busy rebinding
workqueue: reimplement idle worker rebinding
workqueue: deprecate __cancel_delayed_work()
workqueue: reimplement cancel_delayed_work() using try_to_grab_pending()
workqueue: use mod_delayed_work() instead of __cancel + queue
workqueue: use irqsafe timer for delayed_work
workqueue: clean up delayed_work initializers and add missing one
workqueue: make deferrable delayed_work initializer names consistent
workqueue: cosmetic whitespace updates for macro definitions
workqueue: deprecate system_nrt[_freezable]_wq
workqueue: deprecate flush[_delayed]_work_sync()
...
|
|
In some usage scenarios it is desireable to work with disk images or
virtualized DASD devices. One problem that prevents such applications
is the partition detection in ibm.c. Currently it works only for
devices that support the BIODASDINFO2 ioctl, in other words, it only
works for devices that belong to the DASD device driver.
The information gained from the BIODASDINFO2 ioctl is only for a small
set of legacy cases abolutely necessary. All current VOL1, LNX1 and
CMS1 type of disk labels can be interpreted correctly without this
information, as long as the generic HDIO_GETGEO ioctl works and
provides a correct disk geometry.
This patch makes the ibm.c partition detection as independent as
possible from the BIODASDINFO2 ioctl. Only the following two cases are
still restricted to real DASDs:
- An FBA DASD, or LDL formatted ECKD DASD without any disk label.
- An old style LNX1 label (without large volume support) on a disk
with inconsistent device geometry.
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
A queue newly allocated with blk_alloc_queue_node() has only
QUEUE_FLAG_BYPASS set. For request-based drivers,
blk_init_allocated_queue() is called and q->queue_flags is overwritten
with QUEUE_FLAG_DEFAULT which doesn't include BYPASS even though the
initial bypass is still in effect.
In blk_init_allocated_queue(), or QUEUE_FLAG_DEFAULT to q->queue_flags
instead of overwriting.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
b82d4b197c ("blkcg: make request_queue bypassing on allocation") made
request_queues bypassed on allocation to avoid switching on and off
bypass mode on a queue being initialized. Some drivers allocate and
then destroy a lot of queues without fully initializing them and
incurring bypass latency overhead on each of them could add upto
significant overhead.
Unfortunately, blk_init_allocated_queue() is never used by queues of
bio-based drivers, which means that all bio-based driver queues are in
bypass mode even after initialization and registration complete
successfully.
Due to the limited way request_queues are used by bio drivers, this
problem is hidden pretty well but it shows up when blk-throttle is
used in combination with a bio-based driver. Trying to configure
(echoing to cgroupfs file) blk-throttle for a bio-based driver hangs
indefinitely in blkg_conf_prep() waiting for bypass mode to end.
This patch moves the initial blk_queue_bypass_end() call from
blk_init_allocated_queue() to blk_register_queue() which is called for
any userland-visible queues regardless of its type.
I believe this is correct because I don't think there is any block
driver which needs or wants working elevator and blk-cgroup on a queue
which isn't visible to userland. If there are such users, we need a
different solution.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Joseph Glanville <joseph.glanville@orionvm.com.au>
Cc: stable@vger.kernel.org
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Introduce a BLKZEROOUT ioctl which can be used to clear block ranges by
way of blkdev_issue_zeroout().
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
Tejun Heo
Tomas Henzl
Ming Lei
Darrick J. Wong
Linus Torvalds
Clark Williams
Derek Basehore
Oleg Nesterov
NeilBrown
Shaohua Li
xiaobing tu
Diego Calleja
Bart Van Assche
Roland Dreier
Stephen Warren
Ezequiel Garcia
Shaohua Li
Jianpeng Ma
Kees Cook
Jun'ichi Nomura
Stefan Weinhuber
Martin K. Petersen