aboutsummaryrefslogtreecommitdiffstats
path: root/block (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-08-28blkcg: make ->cpd_init_fn() optionalTejun Heo1-1/+2
For policies which can do enough initialization from ->cpd_alloc_fn(), make ->cpd_init_fn() optional. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-28blkcg: pass @q and @blkcg into blkcg_pol_alloc_pd_fn()Tejun Heo4-9/+14
Instead of @node, pass in @q and @blkcg so that the alloc function has more context. This doesn't cause any behavior change and will be used by io.weight implementation. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27block: split .sysfs_lock into two locksMing Lei5-33/+83
The kernfs built-in lock of 'kn->count' is held in sysfs .show/.store path. Meantime, inside block's .show/.store callback, q->sysfs_lock is required. However, when mq & iosched kobjects are removed via blk_mq_unregister_dev() & elv_unregister_queue(), q->sysfs_lock is held too. This way causes AB-BA lock because the kernfs built-in lock of 'kn-count' is required inside kobject_del() too, see the lockdep warning[1]. On the other hand, it isn't necessary to acquire q->sysfs_lock for both blk_mq_unregister_dev() & elv_unregister_queue() because clearing REGISTERED flag prevents storing to 'queue/scheduler' from being happened. Also sysfs write(store) is exclusive, so no necessary to hold the lock for elv_unregister_queue() when it is called in switching elevator path. So split .sysfs_lock into two: one is still named as .sysfs_lock for covering sync .store, the other one is named as .sysfs_dir_lock for covering kobjects and related status change. sysfs itself can handle the race between add/remove kobjects and showing/storing attributes under kobjects. For switching scheduler via storing to 'queue/scheduler', we use the queue flag of QUEUE_FLAG_REGISTERED with .sysfs_lock for avoiding the race, then we can avoid to hold .sysfs_lock during removing/adding kobjects. [1] lockdep warning ====================================================== WARNING: possible circular locking dependency detected 5.3.0-rc3-00044-g73277fc75ea0 #1380 Not tainted ------------------------------------------------------ rmmod/777 is trying to acquire lock: 00000000ac50e981 (kn->count#202){++++}, at: kernfs_remove_by_name_ns+0x59/0x72 but task is already holding lock: 00000000fb16ae21 (&q->sysfs_lock){+.+.}, at: blk_unregister_queue+0x78/0x10b which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&q->sysfs_lock){+.+.}: __lock_acquire+0x95f/0xa2f lock_acquire+0x1b4/0x1e8 __mutex_lock+0x14a/0xa9b blk_mq_hw_sysfs_show+0x63/0xb6 sysfs_kf_seq_show+0x11f/0x196 seq_read+0x2cd/0x5f2 vfs_read+0xc7/0x18c ksys_read+0xc4/0x13e do_syscall_64+0xa7/0x295 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (kn->count#202){++++}: check_prev_add+0x5d2/0xc45 validate_chain+0xed3/0xf94 __lock_acquire+0x95f/0xa2f lock_acquire+0x1b4/0x1e8 __kernfs_remove+0x237/0x40b kernfs_remove_by_name_ns+0x59/0x72 remove_files+0x61/0x96 sysfs_remove_group+0x81/0xa4 sysfs_remove_groups+0x3b/0x44 kobject_del+0x44/0x94 blk_mq_unregister_dev+0x83/0xdd blk_unregister_queue+0xa0/0x10b del_gendisk+0x259/0x3fa null_del_dev+0x8b/0x1c3 [null_blk] null_exit+0x5c/0x95 [null_blk] __se_sys_delete_module+0x204/0x337 do_syscall_64+0xa7/0x295 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&q->sysfs_lock); lock(kn->count#202); lock(&q->sysfs_lock); lock(kn->count#202); *** DEADLOCK *** 2 locks held by rmmod/777: #0: 00000000e69bd9de (&lock){+.+.}, at: null_exit+0x2e/0x95 [null_blk] #1: 00000000fb16ae21 (&q->sysfs_lock){+.+.}, at: blk_unregister_queue+0x78/0x10b stack backtrace: CPU: 0 PID: 777 Comm: rmmod Not tainted 5.3.0-rc3-00044-g73277fc75ea0 #1380 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS ?-20180724_192412-buildhw-07.phx4 Call Trace: dump_stack+0x9a/0xe6 check_noncircular+0x207/0x251 ? print_circular_bug+0x32a/0x32a ? find_usage_backwards+0x84/0xb0 check_prev_add+0x5d2/0xc45 validate_chain+0xed3/0xf94 ? check_prev_add+0xc45/0xc45 ? mark_lock+0x11b/0x804 ? check_usage_forwards+0x1ca/0x1ca __lock_acquire+0x95f/0xa2f lock_acquire+0x1b4/0x1e8 ? kernfs_remove_by_name_ns+0x59/0x72 __kernfs_remove+0x237/0x40b ? kernfs_remove_by_name_ns+0x59/0x72 ? kernfs_next_descendant_post+0x7d/0x7d ? strlen+0x10/0x23 ? strcmp+0x22/0x44 kernfs_remove_by_name_ns+0x59/0x72 remove_files+0x61/0x96 sysfs_remove_group+0x81/0xa4 sysfs_remove_groups+0x3b/0x44 kobject_del+0x44/0x94 blk_mq_unregister_dev+0x83/0xdd blk_unregister_queue+0xa0/0x10b del_gendisk+0x259/0x3fa ? disk_events_poll_msecs_store+0x12b/0x12b ? check_flags+0x1ea/0x204 ? mark_held_locks+0x1f/0x7a null_del_dev+0x8b/0x1c3 [null_blk] null_exit+0x5c/0x95 [null_blk] __se_sys_delete_module+0x204/0x337 ? free_module+0x39f/0x39f ? blkcg_maybe_throttle_current+0x8a/0x718 ? rwlock_bug+0x62/0x62 ? __blkcg_punt_bio_submit+0xd0/0xd0 ? trace_hardirqs_on_thunk+0x1a/0x20 ? mark_held_locks+0x1f/0x7a ? do_syscall_64+0x4c/0x295 do_syscall_64+0xa7/0x295 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fb696cdbe6b Code: 73 01 c3 48 8b 0d 1d 20 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 008 RSP: 002b:00007ffec9588788 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000559e589137c0 RCX: 00007fb696cdbe6b RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559e58913828 RBP: 0000000000000000 R08: 00007ffec9587701 R09: 0000000000000000 R10: 00007fb696d4eae0 R11: 0000000000000206 R12: 00007ffec95889b0 R13: 00007ffec95896b3 R14: 0000559e58913260 R15: 0000559e589137c0 Cc: Christoph Hellwig <hch@infradead.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27block: add helper for checking if queue is registeredMing Lei3-4/+4
There are 4 users which check if queue is registered, so add one helper to check it. Cc: Christoph Hellwig <hch@infradead.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27blk-mq: don't hold q->sysfs_lock in blk_mq_map_swqueueMing Lei1-7/+0
blk_mq_map_swqueue() is called from blk_mq_init_allocated_queue() and blk_mq_update_nr_hw_queues(). For the former caller, the kobject isn't exposed to userspace yet. For the latter caller, hctx sysfs entries and debugfs are un-registered before updating nr_hw_queues. On the other hand, commit 2f8f1336a48b ("blk-mq: always free hctx after request queue is freed") moves freeing hctx into queue's release handler, so there won't be race with queue release path too. So don't hold q->sysfs_lock in blk_mq_map_swqueue(). Cc: Christoph Hellwig <hch@infradead.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27block: don't hold q->sysfs_lock in elevator_init_mqMing Lei1-9/+5
The original comment says: q->sysfs_lock must be held to provide mutual exclusion between elevator_switch() and here. Which is simply wrong. elevator_init_mq() is only called from blk_mq_init_allocated_queue, which is always called before the request queue is registered via blk_register_queue(), for dm-rq or normal rq based driver. However, queue's kobject is only exposed and added to sysfs in blk_register_queue(). So there isn't such race between elevator_switch() and elevator_init_mq(). So avoid to hold q->sysfs_lock in elevator_init_mq(). Cc: Christoph Hellwig <hch@infradead.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27block: Remove blk_mq_register_dev()Bart Van Assche1-11/+0
This function has no callers. Hence remove it. Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-22block: move same page handling from __bio_add_pc_page to the callersChristoph Hellwig1-10/+10
Hiding page refcount manipulation inside a low-level bio helper is somewhat awkward. Instead return the same page information to the callers, where it fits in much better. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-22block: create a bio_try_merge_pc_page helperChristoph Hellwig1-24/+10
Passsthrough bio handling should be the same as normal bio handling, except that we need to take hardware limitations into account. Thus use the common try_merge implementation after checking the hardware limits. This changes behavior in that we now also check segment and dma boundary settings for same page merges, which is a little more work but has no effect as those need to be larger than the page size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-22block: improve the gap check in __bio_add_pc_pageChristoph Hellwig1-7/+7
If we can add more data into an existing segment we do not create a gap per definition, so move the check for a gap after the attempt to merge into the segment. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20block: sed-opal: Removed duplicate OPAL_METHOD_LENGTH definitionRevanth Rajashekar1-2/+0
The original commit adding the sed-opal library by mistake added two definitions of OPAL_METHOD_LENGTH, remove one of them. Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20block: sed-opal: Remove always false conditional statementRevanth Rajashekar1-4/+0
In the function 'response_parse', num_entries will never be 0 as slen is checked for 0. Hence, the condition 'if (num_entries == 0)' can never be true. Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20block: sed-opal: Add/remove spacesRevanth Rajashekar2-6/+42
Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-19block: remove struct request_queue queue_headJunxiao Bi1-1/+0
The dispatch list is not used any more, as the legacy block IO stack has been removed. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-15block: remove REQ_NOWAIT_INLINEJens Axboe1-6/+2
We had a few issues with this code, and there's still a problem around how we deal with error handling for chained/split bios. For now, just revert the code and we'll try again with a thoroug solution. This reverts commits: e15c2ffa1091 ("block: fix O_DIRECT error handling for bio fragments") 0eb6ddfb865c ("block: Fix __blkdev_direct_IO() for bio fragments") 6a43074e2f46 ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO") 893a1c97205a ("blk-mq: allow REQ_NOWAIT to return an error inline") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-14block: annotate refault stalls from IO submissionJohannes Weiner2-1/+25
psi tracks the time tasks wait for refaulting pages to become uptodate, but it does not track the time spent submitting the IO. The submission part can be significant if backing storage is contended or when cgroup throttling (io.latency) is in effect - a lot of time is spent in submit_bio(). In that case, we underreport memory pressure. Annotate submit_bio() to account submission time as memory stall when the bio is reading userspace workingset pages. Tested-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-12blk-mq: Fix memory leak in blk_mq_init_allocated_queue error handlingzhengbin1-3/+6
If blk_mq_init_allocated_queue->elevator_init_mq fails, need to release the previously requested resources. Fixes: d34849913819 ("blk-mq-sched: allow setting of default IO scheduler") Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-12blk-mq: move cancel of requeue_work to the front of blk_exit_queuezhengbin2-2/+3
blk_exit_queue will free elevator_data, while blk_mq_requeue_work will access it. Move cancel of requeue_work to the front of blk_exit_queue to avoid use-after-free. blk_exit_queue blk_mq_requeue_work __elevator_exit blk_mq_run_hw_queues blk_mq_exit_sched blk_mq_run_hw_queue dd_exit_queue blk_mq_hctx_has_pending kfree(elevator_data) blk_mq_sched_has_work dd_has_work Fixes: fbc2a15e3433 ("blk-mq: move cancel of requeue_work into blk_mq_release") Cc: stable@vger.kernel.org Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-08block, bfq: handle NULL return value by bfq_init_rq()Paolo Valente1-3/+11
As reported in [1], the call bfq_init_rq(rq) may return NULL in case of OOM (in particular, if rq->elv.icq is NULL because memory allocation failed in failed in ioc_create_icq()). This commit handles this circumstance. [1] https://lkml.org/lkml/2019/7/22/824 Cc: Hsin-Yi Wang <hsinyi@google.com> Cc: Nicolas Boichat <drinkcat@chromium.org> Cc: Doug Anderson <dianders@chromium.org> Reported-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Hsin-Yi Wang <hsinyi@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-08block, bfq: move update of waker and woken list to queue freeingPaolo Valente1-15/+29
Since commit 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O"), every bfq_queue has a pointer to a waker bfq_queue and a list of the bfq_queues it may wake. In this respect, when a bfq_queue, say Q, remains with no I/O source attached to it, Q cannot be woken by any other bfq_queue, and cannot wake any other bfq_queue. Then Q must be removed from the woken list of its possible waker bfq_queue, and all bfq_queues in the woken list of Q must stop having a waker bfq_queue. Q remains with no I/O source in two cases: when the last process associated with Q exits or when such a process gets associated with a different bfq_queue. Unfortunately, commit 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O") performed the above updates only in the first case. This commit fixes this bug by moving these updates to when Q gets freed. This is a simple and safe way to handle all cases, as both the above events, process exit and re-association, lead to Q being freed soon, and because dangling references would come out only after Q gets freed (if no update were performed). Fixes: 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O") Reported-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-08block, bfq: reset last_completed_rq_bfqq if the pointed queue is freedPaolo Valente1-3/+7
Since commit 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O"), BFQ stores, in a per-device pointer last_completed_rq_bfqq, the last bfq_queue that had an I/O request completed. If some bfq_queue receives new I/O right after the last request of last_completed_rq_bfqq has been completed, then last_completed_rq_bfqq may be a waker bfq_queue. But if the bfq_queue last_completed_rq_bfqq points to is freed, then last_completed_rq_bfqq becomes a dangling reference. This commit resets last_completed_rq_bfqq if the pointed bfq_queue is freed. Fixes: 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O") Reported-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-06block: stop exporting bio_map_kernHans Holmberg1-1/+0
Now that there no module users left of bio_map_kern, stop exporting the symbol. Reviewed-by: Javier González <javier@javigon.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hans Holmberg <hans@owltronix.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04blk-mq: balance mapping between present CPUs and queuesMing Lei1-7/+22
Spread queues among present CPUs first, then building mapping on other non-present CPUs. So we can minimize count of dead queues which are mapped by un-present CPUs only. Then bad IO performance can be avoided by unbalanced mapping between present CPUs and queues. The similar policy has been applied on Managed IRQ affinity. Cc: Yi Zhang <yi.zhang@redhat.com> Reported-by: Yi Zhang <yi.zhang@redhat.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04blk-zoned: implement REQ_OP_ZONE_RESET_ALLChaitanya Kulkarni2-0/+44
This implements REQ_OP_ZONE_RESET_ALL as a special case of the block device zone reset operations where we just simply issue bio with the newly introduced req op. We issue this req op when the number of sectors is equal to the device's partition's number of sectors and device has no partitions. We also add support so that blk_op_str() can print the new reset-all zone operation. This patch also adds a generic make request check for newly introduced REQ_OP_ZONE_RESET_ALL req_opf. We simply return error when queue is zoned and reset-all flag is not set for REQ_OP_ZONE_RESET_ALL. Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04block: Fix a comment in blk_cleanup_queue()Bart Van Assche1-1/+2
Change a reference to the legacy block layer into a reference to blk-mq. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hannes Reinecke <hare@suse.com> Cc: James Smart <james.smart@broadcom.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Jianchao Wang <jianchao.w.wang@oracle.com> Cc: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04block: Improve physical block alignment of split biosBart Van Assche1-4/+17
Consider the following example: * The logical block size is 4 KB. * The physical block size is 8 KB. * max_sectors equals (16 KB >> 9) sectors. * A non-aligned 4 KB and an aligned 64 KB bio are merged into a single non-aligned 68 KB bio. The current behavior is to split such a bio into (16 KB + 16 KB + 16 KB + 16 KB + 4 KB). The start of none of these five bio's is aligned to a physical block boundary. This patch ensures that such a bio is split into four aligned and one non-aligned bio instead of being split into five non-aligned bios. This improves performance because most block devices can handle aligned requests faster than non-aligned requests. Since the physical block size is larger than or equal to the logical block size, this patch preserves the guarantee that the returned value is a multiple of the logical block size. Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04block: Simplify blk_bio_segment_split()Bart Van Assche1-35/+33
Move the max_sectors check into bvec_split_segs() such that a single call to that function can do all the necessary checks. This patch optimizes the fast path further, namely if a bvec fits in a page. Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04block: Simplify bvec_split_segs()Bart Van Assche1-9/+7
Simplify this function by by removing two if-tests. Other than requiring that the @sectors pointer is not NULL, this patch does not change the behavior of bvec_split_segs(). Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04block: Document the bio splitting functionsBart Van Assche2-2/+45
Since what the bio splitting functions do is nontrivial, document these functions. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04block: Declare several function pointer arguments 'const'Bart Van Assche1-3/+4
Make it clear to the compiler and also to humans that the functions that query request queue properties do not modify any member of the request_queue data structure. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04blk-mq: remove blk_mq_complete_request_syncMing Lei1-7/+0
blk_mq_tagset_wait_completed_request() has been applied for waiting for completed request's fn, so not necessary to use blk_mq_complete_request_sync() any more. Cc: Max Gurtovoy <maxg@mellanox.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Keith Busch <keith.busch@intel.com> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04blk-mq: introduce blk_mq_tagset_wait_completed_request()Ming Lei1-0/+32
blk-mq may schedule to call queue's complete function on remote CPU via IPI, but doesn't provide any way to synchronize the request's complete fn. The current queue freeze interface can't provide the synchonization because aborted requests stay at blk-mq queues during EH. In some driver's EH(such as NVMe), hardware queue's resource may be freed & re-allocated. If the completed request's complete fn is run finally after the hardware queue's resource is released, kernel crash will be triggered. Prepare for fixing this kind of issue by introducing blk_mq_tagset_wait_completed_request(). Cc: Max Gurtovoy <maxg@mellanox.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Keith Busch <keith.busch@intel.com> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04blk-mq: introduce blk_mq_request_completed()Ming Lei1-0/+6
NVMe needs this function to decide if one request to be aborted has been completed in normal IO path already. So introduce it. Cc: Max Gurtovoy <maxg@mellanox.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Keith Busch <keith.busch@intel.com> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-01hrtimer/treewide: Use hrtimer_sleeper_start_expires()Thomas Gleixner1-1/+1
hrtimer_sleepers will gain a scheduling class dependent treatment on PREEMPT_RT. Use the new hrtimer_sleeper_start_expires() function to make that possible. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2019-08-01hrtimer: Consolidate hrtimer_init() + hrtimer_init_sleeper() callsSebastian Andrzej Siewior1-2/+1
hrtimer_init_sleeper() calls require prior initialisation of the hrtimer object which is embedded into the hrtimer_sleeper. Combine the initialization and spare a function call. Fixup all call sites. This is also a preparatory change for PREEMPT_RT to do hrtimer sleeper specific initializations of the embedded hrtimer without modifying any of the call sites. No functional change. [ anna-maria: Minor cleanups ] [ tglx: Adopted to the removal of the task argument of hrtimer_init_sleeper() and trivial polishing. Folded a fix from Stephen Rothwell for the vsoc code ] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20190726185752.887468908@linutronix.de
2019-07-30hrtimer: Remove task argument from hrtimer_init_sleeper()Thomas Gleixner1-1/+1
All callers hand in 'current' and that's the only task pointer which actually makes sense. Remove the task argument and set current in the function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20190726185752.791885290@linutronix.de
2019-07-26Merge tag 'for-linus-20190726-2' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+2
Pull block DMA segment fix from Jens Axboe: "Here's the virtual boundary segment size fix" * tag 'for-linus-20190726-2' of git://git.kernel.dk/linux-block: block: fix max segment size handling in blk_queue_virt_boundary
2019-07-26block: fix max segment size handling in blk_queue_virt_boundaryChristoph Hellwig1-1/+2
We should only set the max segment size to unlimited if we actually have a virt boundary. Otherwise we accidentally clear that limit when called from the SCSI midlayer, which always calls blk_queue_virt_boundary, even if that mask is 0. Fixes: 7ad388d8e4c7 ("scsi: core: add a host / host template field for the virt boundary") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-26Merge tag 'for-linus-20190726' of git://git.kernel.dk/linux-blockLinus Torvalds7-45/+62
Pull block fixes from Jens Axboe: - Several io_uring fixes/improvements: - Blocking fix for O_DIRECT (me) - Latter page slowness for registered buffers (me) - Fix poll hang under certain conditions (me) - Defer sequence check fix for wrapped rings (Zhengyuan) - Mismatch in async inc/dec accounting (Zhengyuan) - Memory ordering issue that could cause stall (Zhengyuan) - Track sequential defer in bytes, not pages (Zhengyuan) - NVMe pull request from Christoph - Set of hang fixes for wbt (Josef) - Redundant error message kill for libahci (Ding) - Remove unused blk_mq_sched_started_request() and related ops (Marcos) - drbd dynamic alloc shash descriptor to reduce stack use (Arnd) - blkcg ->pd_stat() non-debug print (Tejun) - bcache memory leak fix (Wei) - Comment fix (Akinobu) - BFQ perf regression fix (Paolo) * tag 'for-linus-20190726' of git://git.kernel.dk/linux-block: (24 commits) io_uring: ensure ->list is initialized for poll commands Revert "nvme-pci: don't create a read hctx mapping without read queues" nvme: fix multipath crash when ANA is deactivated nvme: fix memory leak caused by incorrect subsystem free nvme: ignore subnqn for ADATA SX6000LNP drbd: dynamically allocate shash descriptor block: blk-mq: Remove blk_mq_sched_started_request and started_request bcache: fix possible memory leak in bch_cached_dev_run() io_uring: track io length in async_list based on bytes io_uring: don't use iov_iter_advance() for fixed buffers block: properly handle IOCB_NOWAIT for async O_DIRECT IO blk-mq: allow REQ_NOWAIT to return an error inline io_uring: add a memory barrier before atomic_read rq-qos: use a mb for got_token rq-qos: set ourself TASK_UNINTERRUPTIBLE after we schedule rq-qos: don't reset has_sleepers on spurious wakeups rq-qos: fix missed wake-ups in rq_qos_throttle wait: add wq_has_single_sleeper helper block, bfq: check also in-flight I/O in dispatch plugging block: fix sysfs module parameters directory path in comment ...
2019-07-23block: blk-mq: Remove blk_mq_sched_started_request and started_requestMarcos Paulo de Souza2-11/+0
blk_mq_sched_completed_request is a function that checks if the elevator related to the request has started_request implemented, but currently, none of the available IO schedulers implement started_request, so remove both. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-21blk-mq: allow REQ_NOWAIT to return an error inlineJens Axboe1-2/+6
By default, if a caller sets REQ_NOWAIT and we need to block, we'll return -EAGAIN through the bio->bi_end_io() callback. For some use cases, this makes it hard to use. Allow a caller to ask for inline return of errors related to blocking by also setting REQ_NOWAIT_INLINE. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-18rq-qos: use a mb for got_tokenJosef Bacik1-0/+3
Oleg noticed that our checking of data.got_token is unsafe in the cleanup case, and should really use a memory barrier. Use a wmb on the write side, and a rmb() on the read side. We don't need one in the main loop since we're saved by set_current_state(). Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-18rq-qos: set ourself TASK_UNINTERRUPTIBLE after we scheduleJosef Bacik1-0/+1
In case we get a spurious wakeup we need to make sure to re-set ourselves to TASK_UNINTERRUPTIBLE so we don't busy wait. Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-18rq-qos: don't reset has_sleepers on spurious wakeupsJosef Bacik1-1/+1
If we raced with somebody else getting an inflight counter we could fail to get an inflight counter with no sleepers on the list, and thus need to go to sleep. In this case has_sleepers should be true because we are now relying on the waker to get our inflight counter for us. And in the case of spurious wakeups we'd still want this to be the case. So set has_sleepers to true if we went to sleep to make sure we're woken up the proper way. Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-18rq-qos: fix missed wake-ups in rq_qos_throttleJosef Bacik1-0/+1
We saw a hang in production with WBT where there was only one waiter in the throttle path and no outstanding IO. This is because of the has_sleepers optimization that is used to make sure we don't steal an inflight counter for new submitters when there are people already on the list. We can race with our check to see if the waitqueue has any waiters (this is done locklessly) and the time we actually add ourselves to the waitqueue. If this happens we'll go to sleep and never be woken up because nobody is doing IO to wake us up. Fix this by checking if the waitqueue has a single sleeper on the list after we add ourselves, that way we have an uptodate view of the list. Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-18block, bfq: check also in-flight I/O in dispatch pluggingPaolo Valente1-24/+43
Consider a sync bfq_queue Q that remains empty while in service, and suppose that, when this happens, there is a fair amount of already in-flight I/O not belonging to Q. In such a situation, I/O dispatching may need to be plugged (until new I/O arrives for Q), for the following reason. The drive may decide to serve in-flight non-Q's I/O requests before Q's ones, thereby delaying the arrival of new I/O requests for Q (recall that Q is sync). If I/O-dispatching is not plugged, then, while Q remains empty, a basically uncontrolled amount of I/O from other queues may be dispatched too, possibly causing the service of Q's I/O to be delayed even longer in the drive. This problem gets more and more serious as the speed and the queue depth of the drive grow, because, as these two quantities grow, the probability to find no queue busy but many requests in flight grows too. If Q has the same weight and priority as the other queues, then the above delay is unlikely to cause any issue, because all queues tend to undergo the same treatment. So, since not plugging I/O dispatching is convenient for throughput, it is better not to plug. Things change in case Q has a higher weight or priority than some other queue, because Q's service guarantees may simply be violated. For this reason, commit 1de0c4cd9ea6 ("block, bfq: reduce idling only in symmetric scenarios") does plug I/O in such an asymmetric scenario. Plugging minimizes the delay induced by already in-flight I/O, and enables Q to recover the bandwidth it may lose because of this delay. Yet the above commit does not cover the case of weight-raised queues, for efficiency concerns. For weight-raised queues, I/O-dispatch plugging is activated simply if not all bfq_queues are weight-raised. But this check does not handle the case of in-flight requests, because a bfq_queue may become non busy *before* all its in-flight requests are completed. This commit performs I/O-dispatch plugging for weight-raised queues if there are some in-flight requests. As a practical example of the resulting recover of control, under write load on a Samsung SSD 970 PRO, gnome-terminal starts in 1.5 seconds after this fix, against 15 seconds before the fix (as a reference, gnome-terminal takes about 35 seconds to start with any of the other I/O schedulers). Fixes: 1de0c4cd9ea6 ("block, bfq: reduce idling only in symmetric scenarios") Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-16Merge tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds8-9/+9
Pull rst conversion of docs from Mauro Carvalho Chehab: "As agreed with Jon, I'm sending this big series directly to you, c/c him, as this series required a special care, in order to avoid conflicts with other trees" * tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (77 commits) docs: kbuild: fix build with pdf and fix some minor issues docs: block: fix pdf output docs: arm: fix a breakage with pdf output docs: don't use nested tables docs: gpio: add sysfs interface to the admin-guide docs: locking: add it to the main index docs: add some directories to the main documentation index docs: add SPDX tags to new index files docs: add a memory-devices subdir to driver-api docs: phy: place documentation under driver-api docs: serial: move it to the driver-api docs: driver-api: add remaining converted dirs to it docs: driver-api: add xilinx driver API documentation docs: driver-api: add a series of orphaned documents docs: admin-guide: add a series of orphaned documents docs: cgroup-v1: add it to the admin-guide book docs: aoe: add it to the driver-api book docs: add some documentation dirs to the driver-api book docs: driver-model: move it to the driver-api book docs: lp855x-driver.rst: add it to the driver-api book ...
2019-07-16block: fix sysfs module parameters directory path in commentAkinobu Mita1-1/+1
The runtime configurable module parameter files are located under /sys/module/MODULENAME/parameters, not /sys/module/MODULENAME. Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-16blkcg: allow blkcg_policy->pd_stat() to print non-debug info tooTejun Heo2-6/+6
Currently, ->pd_stat() is called only when moduleparam blkcg_debug_stats is set which prevents it from printing non-debug policy-specific statistics. Let's move debug testing down so that ->pd_stat() can print non-debug stat too. This patch doesn't cause any visible behavior change. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-15docs: admin-guide: add a series of orphaned documentsMauro Carvalho Chehab1-1/+1
There are lots of documents that belong to the admin-guide but are on random places (most under Documentation root dir). Move them to the admin guide. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.