aboutsummaryrefslogtreecommitdiffstats
path: root/crypto/khazad.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-08-18net: 8021q: convert to using IFF_NO_QUEUEPhil Sutter1-2/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: vxlan: convert to using IFF_NO_QUEUEPhil Sutter1-2/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: team: convert to using IFF_NO_QUEUEPhil Sutter1-1/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: nlmon: convert to using IFF_NO_QUEUEPhil Sutter1-1/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: loopback: convert to using IFF_NO_QUEUEPhil Sutter1-2/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: geneve: convert to using IFF_NO_QUEUEPhil Sutter1-2/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: dummy: convert to using IFF_NO_QUEUEPhil Sutter1-2/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: veth: enable noqueue operation by defaultPhil Sutter1-0/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net: Identifier Locator Addressing moduleTom Herbert5-0/+252
Adding new module name ila. This implements ILA translation. Light weight tunnel redirection is used to perform the translation in the data path. This is configured by the "ip -6 route" command using the "encap ila <locator>" option, where <locator> is the value to set in destination locator of the packet. e.g. ip -6 route add 3333:0:0:1:5555:0:1:0/128 \ encap ila 2001:0:0:1 via 2401:db00:20:911a:face:0:25:0 Sets a route where 3333:0:0:1 will be overwritten by 2001:0:0:1 on output. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net: Add inet_proto_csum_replace_by_diff utility functionTom Herbert2-0/+15
This function updates a checksum field value and skb->csum based on a value which is the difference between the old and new checksum. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net: Change pseudohdr argument of inet_proto_csum_replace* to be a boolTom Herbert18-36/+38
inet_proto_csum_replace4,2,16 take a pseudohdr argument which indicates the checksum field carries a pseudo header. This argument should be a boolean instead of an int. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17lwt: Add support to redirect dst.inputTom Herbert4-3/+98
This patch adds the capability to redirect dst input in the same way that dst output is redirected by LWT. Also, save the original dst.input and and dst.out when setting up lwtunnel redirection. These can be called by the client as a pass- through. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17enic: Fix sparse warning in vnic_devcmd_init().David S. Miller1-1/+1
>> drivers/net/ethernet/cisco/enic/vnic_dev.c:1095:13: sparse: incorrect type in assignment (different address spaces) drivers/net/ethernet/cisco/enic/vnic_dev.c:1095:13: expected void *res drivers/net/ethernet/cisco/enic/vnic_dev.c:1095:13: got void [noderef] <asn:2>* Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17mlx5e: Fix sparse warnings in mlx5e_handle_csum().David S. Miller1-1/+1
>> drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:173:44: sparse: incorrect type in argument 1 (different base types) drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:173:44: expected restricted __sum16 [usertype] n drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:173:44: got restricted __be16 [usertype] check_sum Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17inet: Move VRF table lookup to inlined functionDavid Ahern2-9/+25
Table lookup compiles out when VRF is not enabled. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net: Fix docbook warning for IFF_VRF_MASTER enumDavid Ahern1-0/+1
kbuild test robot reported: tree: git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git master head: d52736e24fe2e927c26817256f8d1a3c8b5d51a0 commit: 4e3c89920cd3a6cfce22c6f537690747c26128dd [751/762] net: Introduce VRF related flags and helpers reproduce: make htmldocs >> Warning(include/linux/netdevice.h:1293): Enum value 'IFF_VRF_MASTER' not described in enum 'netdev_priv_flags' Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net: Updates to netif_index_is_vrfDavid Ahern1-1/+11
As Eric noted netif_index_is_vrf is not called with rcu_read_lock held, so wrap the dev_get_by_index_rcu in rcu_read_lock and unlock. If VRF is not enabled or oif is 0 skip the device lookup. In both cases index cannot be the VRF master. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: Support RX CHECKSUM_COMPLETEAchiad Shochat3-12/+43
Only for packets with first ethertype set to IPv4/6 for now. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: Support ethtool get/set_pauseparamAchiad Shochat3-0/+85
Only rx/tx pause settings. Autoneg setting is currently not supported. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: Ethtool link speed setting fixesAchiad Shochat3-27/+23
- Port speed settings are applied by the device only upon port admin status transition from DOWN to UP. So we enforce this transition regardless of the port's current operation state (which may be occasionally DOWN if for example the network cable is disconnected). - Fix the PORT_UP/DOWN device interface enum - Set the local_port bit in the device PAOS register - EXPORT the PAOS (Port Administrative and Operational Status) register set/query access functions. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: HW LRO changes/fixesAchiad Shochat3-4/+5
- Change the maximum LRO session size from 16KB to 64KB - Reduce the LRO session timeout from 512us to 32us in order to reduce the TCP latency of non-LRO'ed flows. - Fix skb_shinfo(skb)->gso_size and set skb_shinfo(skb)->gso_type. - Fix a bug accessing un-initialized mdev pointer. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: Support smaller RX/TX ring sizesAchiad Shochat1-2/+2
We un-intentionally limited the minimum rings size too much. TX minimum ring size reduced from 128 to 64. RX minimum ring size reduced from 128 to 2. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: Add ethtool RSS configuration optionsAchiad Shochat3-11/+74
- get_rxfh_key_size - get_rxfh_indir_size - get/set_rxfh indirection table and RSS Toeplitz hash key - get_rxnfc Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: Make RSS indirection table size a constantAchiad Shochat2-35/+30
The indirection table size was defined by a variable that was actually assigned a constant value. Since we do not have any forseen intension to make it configurable we simply made it a constant. We also limit the number of channels such that the RSS indirection table could always populate all RX rings. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: Have a single RSS Toeplitz hash keyAchiad Shochat2-1/+5
No need to generate a unique key per TIR. Generating a single key per netdev and copying it to all its TIRs. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17enic: add devcmd2Govindarajulu Varadarajan7-12/+222
devcmd is an interface for driver to communicate with fw/adaptor. It involves writing data to hardware registers and waiting for the result. This mechanism does not scale well. The queuing of "no wait" devcmds is done in firmware memory rather than on the host. Firmware memory is a rather more scarce and valuable resource than host memory. A devcmd storm from one vf can disrupt the service on other pf/vf. The lack of flow control allows for possible denial of server from one VM to another. Devcmd2 uses work queue to post the devcmds, just like tx work queue. This allows better flow control. Initialize devcmd2, if fails we fall back to devcmd1. Also change the driver version. Signed-off-by: N V V Satyanarayana Reddy <nalreddy@cisco.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17enic: add devcmd2 resourcesGovindarajulu Varadarajan4-0/+42
Add devcmd resources to vnic_res_type. Add data types used by devcmd. Signed-off-by: N V V Satyanarayana Reddy <nalreddy@cisco.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17enic: use netdev_<foo> or dev_<foo> instead of pr_<foo>Govindarajulu Varadarajan6-31/+54
pr_info does not give any details about the interface involved. This patch uses netdev_info for printing the message. Use dev_info where netdev is not ready. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17enic: move struct definition from .c to .h fileGovindarajulu Varadarajan2-40/+39
Some of the structure definitions are in .c file to make them private to that file. This patch moves the struct definition to .h file, So that their definitions are accessible from other files. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net: Export bpf_prog_create_from_user().David S. Miller1-0/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17ipv6: trivial whitespace fixIan Morris1-1/+2
Change brace placement to be in line with coding standards Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17rhashtable-test: extend to test concurrencyPhil Sutter1-1/+155
After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17selftests/net: test extended BPF fanout modeWillem de Bruijn1-0/+53
Test PACKET_FANOUT_EBPF by inserting a program into the the kernel with bpf(), then attaching it to the fanout group. Observe the same payload-based distribution as in the PACKET_FANOUT_CBPF test. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17selftests/net: test classic bpf fanout modeWillem de Bruijn2-12/+33
Test PACKET_FANOUT_CBPF by inserting a cBPF program that selects a socket by payload. Requires modifying the test program to send packets with multiple payloads. Also fix a bug in testing the return value of mmap() Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17packet: add extended BPF fanout modeWillem de Bruijn2-0/+32
Add fanout mode PACKET_FANOUT_EBPF that accepts an en extended BPF program to select a socket. Update the internal eBPF program by passing to socket option SOL_PACKET/PACKET_FANOUT_DATA a file descriptor returned by bpf(). Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17packet: add classic BPF fanout modeWillem de Bruijn3-2/+104
Add fanout mode PACKET_FANOUT_CBPF that accepts a classic BPF program to select a socket. This avoids having to keep adding special case fanout modes. One example use case is application layer load balancing. The QUIC protocol, for instance, encodes a connection ID in UDP payload. Also add socket option SOL_PACKET/PACKET_FANOUT_DATA that updates data associated with the socket group. Fanout mode PACKET_FANOUT_CBPF is the only user so far. Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17lwtunnel: rename ip lwtunnel attributesJiri Benc3-58/+57
We already have IFLA_IPTUN_ netlink attributes. The IP_TUN_ attributes look very similar, yet they serve very different purpose. This is confusing for anyone trying to implement a user space tool supporting lwt. As the IP_TUN_ attributes are used only for the lightweight tunnels, prefix them with LWTUNNEL_IP_ instead to make their purpose clear. Also, it's more logical to have them in lwtunnel.h together with the encap enum. Fixes: 3093fbe7ff4b ("route: Per route IP tunnel metadata via lightweight tunnel") Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17smsc911x: Fix crash seen if neither ACPI nor OF is configured or usedGuenter Roeck1-1/+6
Commit 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT") makes the call to smsc911x_probe_config() unconditional, and no longer fails if there is no device node. device_get_phy_mode() is called unconditionally, and if there is no phy node configured returns an error code. This error code is assigned to phy_interface, and interpreted elsewhere in the code as valid phy mode. This in turn causes qemu to crash when running a variant of realview_pb_defconfig. qemu: hardware error: lan9118_read: Bad reg 0x86 Fixes: 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT") Cc: Jeremy Linton <jeremy.linton@arm.com> Cc Graeme Gregory <graeme.gregory@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net: fix endian check warning in etherdevice.hJesse Brandeburg1-1/+1
Sparse builds have been warning for a really long time now that etherdevice.h has a conversion that is unsafe. include/linux/etherdevice.h:79:32: warning: restricted __be16 degrades to integer This code change fixes the issue and generates the exact same assembly before/after (checked on x86_64) Fixes: 2c722fe1c821 (etherdevice: Optimize a few is_<foo>_ether_addr functions) Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net: sch_generic: react upon IFF_NO_QUEUE flagPhil Sutter1-2/+4
Handle IFF_NO_QUEUE as alternative to tx_queue_len being zero. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net: declare new net_device priv_flag IFF_NO_QUEUEPhil Sutter1-0/+3
This private net_device flag can be set by drivers to inform that a device runs fine without a qdisc attached. This was formerly done by setting tx_queue_len to zero. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17tipc: don't sanity check non-existing TLV (NL compat)Richard Alpe1-1/+1
A zero length payload means that no TLV (Type Length Value) data has been passed. Prior to this patch a non-existing TLV could be sanity checked with TLV_OK() resulting in random behavior where a user sending an empty message occasionally got a incorrect "operation not supported" message back. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17bnx2: Fix bandwidth allocation for some MF modesYuval Mintz3-2/+6
Management firmware tells driver in case bandwidth configuration for a specific function exists, but [regretably] the same field has different meanings depending on the multi-function mode - it can either be a percentile value or an actual speed. For newer multi-function modes current logic is incorrect - driver understands values as actual speeds instead of percentages, causing the resulting chip configuration to be incorrect. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-16ipv4: fix refcount leak in fib_check_nh()Eric Dumazet1-1/+2
fib_lookup() forces FIB_LOOKUP_NOREF flag, while fib_table_lookup() does not. This patch solves the typical message at reboot time or device dismantle : unregister_netdevice: waiting for eth0 to become free. Usage count = 4 Fixes: 3bfd847203c6 ("net: Use passed in table for nexthop lookups") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Ahern <dsa@cumulusnetworks.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15ieee802154: 6lowpan: fix non-lowpan wpan interfacesAlexander Aring1-3/+4
We receive all 802.15.4 frames on the packet handler "lowpan_rcv" this patch checks if the wpan device belongs to a lowpan interface. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-15ieee802154: 6lowpan: fix packet layer registrationAlexander Aring1-5/+17
This patch fixes 802.15.4 packet layer registration when mutliple lowpan interfaces will be added. We need to register the packet layer at the first lowpan interface and deregister it at the last interface. This done by open_count variable which is protected by rtnl. Additional do a quiet fix by adding dev_put(real_dev) when netdev registration fails, which fix the refcount for the wpan dev. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-15Bluetooth: btusb: mark 0c10:0000 devices with BTUSB_SWAVEPeter Poklop1-0/+3
This patch enables quirk handling for Silicon Wave based devices and fixes kernel bug with id 42985. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0c10 ProdID=0000 Rev=15.00 S: Manufacturer=SiW S: Product=SiW S: SerialNumber=340A05F61100 C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 50mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Peter Poklop <peter.poklop@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-14batman-adv: Fix potentially broken skb network header accessLinus Lüssing1-1/+6
The two commits noted below added calls to ip_hdr() and ipv6_hdr(). They need a correctly set skb network header. Unfortunately we cannot rely on the device drivers to set it for us. Therefore setting it in the beginning of the according ndo_start_xmit handler. Fixes: 1d8ab8d3c176 ("batman-adv: Modified forwarding behaviour for multicast packets") Fixes: ab49886e3da7 ("batman-adv: Add IPv4 link-local/IPv6-ll-all-nodes multicast support") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-14batman-adv: remove broadcast packets scheduled for purged outgoing ifSimon Wunderlich1-1/+2
When an interface is purged, the broadcast packets scheduled for this interface should get purged as well. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-14batman-adv: protect tt request from double deletionMarek Lindner1-4/+5
The list_del() calls were changed to list_del_init() to prevent an accidental double deletion in batadv_tt_req_node_new(). Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.