aboutsummaryrefslogtreecommitdiffstats
path: root/crypto/poly1305_generic.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-01-16crypto: poly1305 - add new 32 and 64-bit generic versionsJason A. Donenfeld1-1/+24
These two C implementations from Zinc -- a 32x32 one and a 64x64 one, depending on the platform -- come from Andrew Moon's public domain poly1305-donna portable code, modified for usage in the kernel. The precomputation in the 32-bit version and the use of 64x64 multiplies in the 64-bit version make these perform better than the code it replaces. Moon's code is also very widespread and has received many eyeballs of scrutiny. There's a bit of interference between the x86 implementation, which relies on internal details of the old scalar implementation. In the next commit, the x86 implementation will be replaced with a faster one that doesn't rely on this, so none of this matters much. But for now, to keep this passing the tests, we inline the bits of the old implementation that the x86 implementation relied on. Also, since we now support a slightly larger key space, via the union, some offsets had to be fixed up. Nonce calculation was folded in with the emit function, to take advantage of 64x64 arithmetic. However, Adiantum appeared to rely on no nonce handling in emit, so this path was conditionalized. We also introduced a new struct, poly1305_core_key, to represent the precise amount of space that particular implementation uses. Testing with kbench9000, depending on the CPU, the update function for the 32x32 version has been improved by 4%-7%, and for the 64x64 by 19%-30%. The 32x32 gains are small, but I think there's great value in having a parallel implementation to the 64x64 one so that the two can be compared side-by-side as nice stand-alone units. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: x86/poly1305 - depend on generic library not generic shashArd Biesheuvel1-7/+4
Remove the dependency on the generic Poly1305 driver. Instead, depend on the generic library so that we only reuse code without pulling in the generic skcipher implementation as well. While at it, remove the logic that prefers the non-SIMD path for short inputs - this is no longer necessary after recent FPU handling changes on x86. Since this removes the last remaining user of the routines exported by the generic shash driver, unexport them and make them static. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: poly1305 - expose init/update/final library interfaceArd Biesheuvel1-21/+1
Expose the existing generic Poly1305 code via a init/update/final library interface so that callers are not required to go through the crypto API's shash abstraction to access it. At the same time, make some preparations so that the library implementation can be superseded by an accelerated arch-specific version in the future. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: x86/poly1305 - unify Poly1305 state struct with generic codeArd Biesheuvel1-3/+3
In preparation of exposing a Poly1305 library interface directly from the accelerated x86 driver, align the state descriptor of the x86 code with the one used by the generic driver. This is needed to make the library interface unified between all implementations. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: poly1305 - move core routines into a separate libraryArd Biesheuvel1-187/+8
Move the core Poly1305 routines shared between the generic Poly1305 shash driver and the Adiantum and NHPoly1305 drivers into a separate library so that using just this pieces does not pull in the crypto API pieces of the generic Poly1305 routine. In a subsequent patch, we will augment this generic library with init/update/final routines so that Poyl1305 algorithm can be used directly without the need for using the crypto API's shash abstraction. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-18crypto: run initcalls for generic implementations earlierEric Biggers1-1/+1
Use subsys_initcall for registration of all templates and generic algorithm implementations, rather than module_init. Then change cryptomgr to use arch_initcall, to place it before the subsys_initcalls. This is needed so that when both a generic and optimized implementation of an algorithm are built into the kernel (not loadable modules), the generic implementation is registered before the optimized one. Otherwise, the self-tests for the optimized implementation are unable to allocate the generic implementation for the new comparison fuzz tests. Note that on arm, a side effect of this change is that self-tests for generic implementations may run before the unaligned access handler has been installed. So, unaligned accesses will crash the kernel. This is arguably a good thing as it makes it easier to detect that type of bug. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-20crypto: poly1305 - add Poly1305 core APIEric Biggers1-75/+99
Expose a low-level Poly1305 API which implements the ε-almost-∆-universal (εA∆U) hash function underlying the Poly1305 MAC and supports block-aligned inputs only. This is needed for Adiantum hashing, which builds an εA∆U hash function from NH and a polynomial evaluation in GF(2^{130}-5); this polynomial evaluation is identical to the one the Poly1305 MAC does. However, the crypto_shash Poly1305 API isn't very appropriate for this because its calling convention assumes it is used as a MAC, with a 32-byte "one-time key" provided for every digest. But by design, in Adiantum hashing the performance of the polynomial evaluation isn't nearly as critical as NH. So it suffices to just have some C helper functions. Thus, this patch adds such functions. Acked-by: Martin Willi <martin@strongswan.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-20crypto: poly1305 - use structures for key and accumulatorEric Biggers1-26/+26
In preparation for exposing a low-level Poly1305 API which implements the ε-almost-∆-universal (εA∆U) hash function underlying the Poly1305 MAC and supports block-aligned inputs only, create structures poly1305_key and poly1305_state which hold the limbs of the Poly1305 "r" key and accumulator, respectively. These structures could actually have the same type (e.g. poly1305_val), but different types are preferable, to prevent misuse. Acked-by: Martin Willi <martin@strongswan.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-09crypto: shash - remove useless setting of type flagsEric Biggers1-1/+0
Many shash algorithms set .cra_flags = CRYPTO_ALG_TYPE_SHASH. But this is redundant with the C structure type ('struct shash_alg'), and crypto_register_shash() already sets the type flag automatically, clearing any type flag that was already there. Apparently the useless assignment has just been copy+pasted around. So, remove the useless assignment from all the shash algorithms. This patch shouldn't change any actual behavior. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-12crypto: poly1305 - remove ->setkey() methodEric Biggers1-12/+5
Since Poly1305 requires a nonce per invocation, the Linux kernel implementations of Poly1305 don't use the crypto API's keying mechanism and instead expect the key and nonce as the first 32 bytes of the data. But ->setkey() is still defined as a stub returning an error code. This prevents Poly1305 from being used through AF_ALG and will also break it completely once we start enforcing that all crypto API users (not just AF_ALG) call ->setkey() if present. Fix it by removing crypto_poly1305_setkey(), leaving ->setkey as NULL. Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-05crypto: poly1305 - remove cra_alignmaskEric Biggers1-1/+0
Now that nothing in poly1305-generic assumes any special alignment, remove the cra_alignmask so that the crypto API does not have to unnecessarily align the buffers. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-05crypto: poly1305 - use unaligned access macros to output digestEric Biggers1-5/+4
Currently the only part of poly1305-generic which is assuming special alignment is the part where the final digest is written. Switch this over to the unaligned access macros so that we'll be able to remove the cra_alignmask. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-11-13crypto: poly1305 - Use unaligned access where requiredJason A. Donenfeld1-19/+15
By using the unaligned access helpers, we drastically improve performance on small MIPS routers that have to go through the exception fix-up handler for these unaligned accesses. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Acked-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17crypto: poly1305 - Export common Poly1305 helpersMartin Willi1-38/+35
As architecture specific drivers need a software fallback, export Poly1305 init/update/final functions together with some helpers in a header file. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-17crypto: poly1305 - Pass key as first two message blocks to each desc_ctxMartin Willi1-38/+59
The Poly1305 authenticator requires a unique key for each generated tag. This implies that we can't set the key per tfm, as multiple users set individual keys. Instead we pass a desc specific key as the first two blocks of the message to authenticate in update(). Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-04crypto: poly1305 - Add a generic Poly1305 authenticator implementationMartin Willi1-0/+300
Poly1305 is a fast message authenticator designed by Daniel J. Bernstein. It is further defined in RFC7539 as a building block for the ChaCha20-Poly1305 AEAD for use in IETF protocols. This is a portable C implementation of the algorithm without architecture specific optimizations, based on public domain code by Daniel J. Bernstein and Andrew Moon. Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>