aboutsummaryrefslogtreecommitdiffstats
path: root/crypto/scatterwalk.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2013-12-26ipv4: ERROR: do not initialise globals to 0 or NULLWeilong Chen1-2/+2
Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26ipv4: fix all space errors in file igmp.cWeilong Chen1-35/+35
Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26ipv4: fix checkpatch error with foo * barWeilong Chen1-1/+1
Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26ipv4: fix checkpatch error "space prohibited"Weilong Chen4-11/+11
Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26ipv4: do clean up with spacesWeilong Chen2-8/+8
Fix checkpatch errors like: ERROR: spaces required around that XXX Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26bnx2x: add VF Multicast filters supportYuval Mintz3-19/+39
This patch adds the necessary support for configuring (and removing) multicast filters to VFs. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26bnx2x: Add num of VFs to Management statisticsYuval Mintz1-0/+2
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26bnx2x: no error when RSS configuration failsYuval Mintz1-4/+8
It's possible for VMs with older versions of bnx2x to run over a hypervisor with latest driver. If a VF in such a VM does not support RSS configuration, the PF driver in the hypervisor will print an error message to system logs. This changes the error message into a debug message, as this is very likely a false alarm for an older VF (i.e., VF manages to work properly; PF simply cannot configure the additional queues for it). Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26bnx2x: add Big-Endian ethtool commentYuval Mintz1-0/+6
There's a known issue that using `ethtool -e' flips the endianity of the written data, i.e., using `ethtool -E' to dump eeprom image and than using `ethtool -e' to re-write that same image will result in an image where the data has the opposite endianity. Sadly, this cannot be fixed as there are already various tools deployed based on the endianity of the eeprom read/write. Instead, a comment is added to the code to help explain why this is un-fixable. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26bnx2x: Add AER support (missing bits)Yuval Mintz2-0/+30
This function adds several OS calls required to fully enable PCIe AER support - pci_enable_pcie_error_reporting() and pci_cleanup_aer_uncorrect_error_status(). Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26bnx2x: Add support for Multi-Function UNDIYuval Mintz4-12/+87
This adds the ability for bnx2x to load after UNDI is used in the preboot environment on a multi-function interface which is not the first interface of a given device. Notice a side-effect is that the order by which the functions are probed and thus interfaces appear might change, as this patch utilizes the EPROBE_DEFER return value (and mechanism). Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26wireless: slight optimization of addr comparedingtianhong6-13/+13
Use possibly more efficient ether_addr_equal or ether_addr_equal_unaligned instead of memcmp. Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26rtlwifi: slight optimization of addr comparedingtianhong1-2/+2
Use possibly more efficient ether_addr_equal_unaligned instead of memcmp. Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Chaoming Li <chaoming_li@realsil.com.cn> Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26mwifiex: slight optimization of addr comparedingtianhong3-4/+3
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Bing Zhao <bzhao@marvell.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26ipw2x00: slight optimization of addr comparedingtianhong2-22/+22
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26cw1200: slight optimization of addr comparedingtianhong2-4/+4
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Solomon Peachy <pizza@shaftnet.org> Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26hostap: slight optimization of addr comparedingtianhong5-24/+22
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Jouni Malinen <j@w1.fi> Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26media: dvb_core: slight optimization of addr comparedingtianhong1-4/+6
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: linux-media@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26isdn: slight optimization of addr comparedingtianhong1-2/+2
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Karsten Keil <isdn@linux-pingi.de> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26atm: slight optimization of addr comparedingtianhong1-2/+2
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Chas Williams <chas@cmf.nrl.navy.mil> Cc: linux-atm-general@lists.sourceforge.net Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26mac8011: slight optimization of addr comparedingtianhong1-4/+3
Use the possibly more efficient ether_addr_equal to instead of memcmp. Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John W. Linville <linville@tuxdriver.com> Cc: David Miller <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26infiniband: slight optimization of addr comparedingtianhong1-2/+1
Use the possibly more efficient ether_addr_equal to instead of memcmp. Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Faisal Latif <faisal.latif@intel.com> Cc: linux-rdma@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26ozwpan: slight optimization of addr comparedingtianhong2-3/+4
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Rupesh Gujare <rupesh.gujare@atmel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: devel@driverdev.osuosl.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26zd1211rw: slight optimization of addr comparedingtianhong1-3/+2
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Daniel Drake <dsd@gentoo.org> Cc: Ulrich Kunitz <kune@deine-taler.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26batman-adv: use batadv_compare_eth for concisedingtianhong2-2/+2
It is better to use batadv_compate_eth instead of memcpy for concise style. Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <antonio@meshcoding.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26ppp: slight optimization of addr comparedingtianhong1-2/+2
Use possibly more efficient ether_addr_equal to instead of memcmp. Cc: Michal Ostrowski <mostrows@earthlink.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26hamradio: slight optimization of addr comparedingtianhong1-1/+1
Use possibly more efficient ether_addr_equal to instead of memcmp. Cc: Joerg Reuter <jreuter@yaina.de> Cc: linux-hams@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26net: atl1: slight optimization of addr comparedingtianhong1-1/+2
Use the recently added and possibly more efficient ether_addr_equal_unaligned to instead of memcmp. Cc: Jay Cliburn <jcliburn@gmail.com> Cc: Chris Snook <chris.snook@gmail.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26net: pcnet: slight optimization of addr comparedingtianhong1-1/+1
Use possibly more efficient ether_addr_equal to instead of memcmp. Cc: Don Fry <pcnet32@frontier.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26net: freescale: remove unused compare_addr()dingtianhong1-5/+0
The function did not be used any more, so remove it. Cc: Li Yang <leoli@freescale.com> Cc: netdev@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26qlge: make local function staticstephen hemminger2-3/+2
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26mdio: unused ethtool functionsstephen hemminger2-31/+0
Use it or lose it. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26hhf: make qdisc ops staticstephen hemminger1-2/+1
This module shouldn't be randomly exporting symbols Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22rose: cleanup checkpatch errors,spaces requiredWeilong Chen2-2/+2
This patch add spaces to cleanup checkpatch errors. Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22sctp: remove the never used 'return' and redundant 'break'wangweidong1-11/+2
In switch() had do return, and never use the 'return NULL'. The 'break' after return or goto has no effect. Remove it. v2: make it more readable as suggested by Neil. Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22mac802154: fix following checkpath.pl warning Prefer pr_warn(... to pr_warning(...Weilong Chen1-2/+2
This patch fixes checkpath.pl: WARNING: Prefer pr_warn(... to pr_warning(... #447: FILE: ./wpan.c:447: Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22cxgb4: make functions static and remove dead codestephen hemminger4-143/+8
Cleanup by making local functions static. The code to load config file is unreachable in net-next, probably came from some out of tree driver. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22sctp: remove casting from function calls through ops structurewangweidong2-3/+3
remove the unnecessary cast. Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22netconf: add support for IPv6 proxy_ndpstephen hemminger1-1/+48
Need to be able to see changes to proxy NDP status on a per interface basis via netlink (analog to proxy_arp). Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22netconf: rename PROXY_ARP to NEIGH_PROXYstephen hemminger2-6/+6
Use same field for both IPv4 (proxy_arp) and IPv6 (proxy_ndp) so fix it before API is set to be a common name Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22net: vxlan: use custom ndo_change_mtu handlerDaniel Borkmann1-1/+24
When adding a new vxlan device to an "underlying carrier" (here: dst->remote_ifindex), the MTU size assigned to the vxlan device is the MTU at setup time of the carrier - needed headroom, when adding a vxlan device w/o explicit carrier, then it defaults to 1500. In case of an explicit carrier that supports jumbo frames, we currently cannot change vxlan MTU via ip(8) to > 1500 in post-setup time, as vxlan driver uses eth_change_mtu() as default method for manually setting MTU. Hence, use a custom implementation that only falls back to eth_change_mtu() in case we didn't use a dev parameter on device setup time, and otherwise allow a max MTU setting of the carrier incl. adjustment for headroom. Reported-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-21net: use kfree_skb_list() helperEric Dumazet2-19/+4
We can use kfree_skb_list() instead of open coding it. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-21ipv6: move ip6_sk_accept_pmtu from generic pmtu update path to ipv6 oneHannes Frederic Sowa2-4/+2
In commit 93b36cf3425b9b ("ipv6: support IPV6_PMTU_INTERFACE on sockets") I made a horrible mistake to add ip6_sk_accept_pmtu to the generic sctp_icmp_frag_needed path. This results in build warnings if IPv6 is disabled which were luckily caught by Fengguang's kbuild bot. But it also leads to a kernel panic IPv4 frag-needed packet is received. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-21Revert "sctp: fix missing include file"David S. Miller1-1/+0
This reverts commit ac0917f250c61ae1e395844ebd924db0e07d1f87. Better version of this fix forthcoming. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22can: ti_hecc: Replace platform dependency with ARM dependencyEzequiel Garcia1-1/+1
OMAP's ti_hecc driver is used to support the CAN controller on many omap2plus SoCs (OMAP2430, OMAP3, OMAP4, OMAP5 and AM335x), so it's wrong to make this depend on OMAP3 only. Take an extra step, to get wider build coverage, and make the driver depend on ARM. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-12-21can: mcp251x: Add device tree supportAlexander Shiyan2-25/+99
This patch adds Device Tree support to the Microchip MCP251X driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-12-21can: gw: remove obsolete checksOliver Hartkopp1-4/+2
In commit be286bafe1f4069094865264f29805854c5788bf ("can: gw: add a variable limit for CAN frame routings") the detection of the frame routing has been changed. The former solution required dev->header_ops to be unused (== NULL). I missed to remove the obsolete checks in the original commit - so here it is. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-12-21packet: doc: add documentation for VLAN TPID deliveryAtzm Watanabe1-2/+7
Introduce TP_STATUS_VLAN_TPID_VALID bit into the documentation. Signed-off-by: Atzm Watanabe <atzm@stratosphere.co.jp> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-21sctp: fix missing include filesfeldma@cumulusnetworks.com1-0/+1
Compile error reported by Jim Davis on netdev. ip6_sk_accept_pmtu() needs net/ip6_route.h Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-20b44: use fixed PHY device if we do not find anyHauke Mehrtens3-1/+28
The ADM6996L switch and some Broadcom switches with two MII interfaces like the BCM5325F connected to two MACs on the SoC, used on some routers do not return a valid value when reading the PHY id register and Linux thinks there is no PHY at all, but that is wrong. This patch registers a fixed phy in the arch code and then searches it when there is no other phy in the Ethernet driver code. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.