aboutsummaryrefslogtreecommitdiffstats
path: root/crypto (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-12-12drm/amdgpu: add invalidate semaphore limit for SRIOV and picasso in gmc9changzhu1-20/+24
It may fail to load guest driver in round 2 or cause Xstart problem when using invalidate semaphore for SRIOV or picasso. So it needs avoid using invalidate semaphore for SRIOV and picasso. Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-12IB/mlx5: Fix steering rule of drop and countMaor Gottlieb1-7/+6
There are two flow rule destinations: QP and packet. While users are setting DROP packet rule, the QP should not be set as a destination. Fixes: 3b3233fbf02e ("IB/mlx5: Add flow counters binding support") Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Raed Salem <raeds@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20191212091214.315005-4-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-12-12IB/mlx4: Follow mirror sequence of device add during device removalParav Pandit1-4/+5
Current code device add sequence is: ib_register_device() ib_mad_init() init_sriov_init() register_netdev_notifier() Therefore, the remove sequence should be, unregister_netdev_notifier() close_sriov() mad_cleanup() ib_unregister_device() However it is not above. Hence, make do above remove sequence. Fixes: fa417f7b520ee ("IB/mlx4: Add support for IBoE") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20191212091214.315005-3-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-12-12RDMA/counter: Prevent auto-binding a QP which are not tracked with resMark Zhang1-0/+3
Some QPs (e.g. XRC QP) are not tracked in kernel, in this case they have an invalid res and should not be bound to any dynamically-allocated counter in auto mode. This fixes below call trace: BUG: kernel NULL pointer dereference, address: 0000000000000390 PGD 80000001a7233067 P4D 80000001a7233067 PUD 1a7215067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 2 PID: 24822 Comm: ibv_xsrq_pingpo Not tainted 5.4.0-rc5+ #21 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 RIP: 0010:rdma_counter_bind_qp_auto+0x142/0x270 [ib_core] Code: e1 48 85 c0 48 89 c2 0f 84 bc 00 00 00 49 8b 06 48 39 42 48 75 d6 40 3a aa 90 00 00 00 75 cd 49 8b 86 00 01 00 00 48 8b 4a 28 <8b> 80 90 03 00 00 39 81 90 03 00 00 75 b4 85 c0 74 b0 48 8b 04 24 RSP: 0018:ffffc900003f39c0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff88820020ec00 RSI: 0000000000000004 RDI: ffffffffffffffc0 RBP: 0000000000000001 R08: ffff888224149ff0 R09: ffffc900003f3968 R10: ffffffffffffffff R11: ffff8882249c5848 R12: ffffffffffffffff R13: ffff88821d5aca50 R14: ffff8881f7690800 R15: ffff8881ff890000 FS: 00007fe53a3e1740(0000) GS:ffff888237b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000390 CR3: 00000001a7292006 CR4: 00000000003606a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: _ib_modify_qp+0x3a4/0x3f0 [ib_core] ? lookup_get_idr_uobject.part.8+0x23/0x40 [ib_uverbs] modify_qp+0x322/0x3e0 [ib_uverbs] ib_uverbs_modify_qp+0x43/0x70 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xb1/0xf0 [ib_uverbs] ib_uverbs_run_method+0x6be/0x760 [ib_uverbs] ? uverbs_disassociate_api+0xd0/0xd0 [ib_uverbs] ib_uverbs_cmd_verbs+0x18d/0x3a0 [ib_uverbs] ? get_acl+0x1a/0x120 ? __alloc_pages_nodemask+0x15d/0x2c0 ib_uverbs_ioctl+0xa7/0x110 [ib_uverbs] do_vfs_ioctl+0xa5/0x610 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x48/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 99fa331dc862 ("RDMA/counter: Add "auto" configuration mode support") Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Ido Kalir <idok@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20191212091214.315005-2-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-12-12fs: remove ksys_dup()Dominik Brodowski3-13/+21
ksys_dup() is used only at one place in the kernel, namely to duplicate fd 0 of /dev/console to stdout and stderr. The same functionality can be achieved by using functions already available within the kernel namespace. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2019-12-12init: unify opening /dev/console as stdin/stdout/stderrDominik Brodowski3-9/+15
Merge the two instances where /dev/console is opened as stdin/stdout/stderr. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2019-12-12cpuidle: Drop unnecessary type cast in cpuidle_poll_time()Rafael J. Wysocki1-1/+1
The data type of the target_residency_ns field in struct cpuidle_state is u64, so it does not need to be cast into u64. Get rid of the unnecessary type cast. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-12blk-cgroup: remove blkcg_drain_queueGuoqing Jiang2-22/+0
Since blk_drain_queue had already been removed, so this function is not needed anymore. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-12block: fix NULL pointer dereference in account statistics with IDELogan Gunthorpe1-2/+3
The IDE driver creates some passthru requests which never get submitted to the block layer in such a way that blk_account_io_start() gets called. However, the driver still calls __blk_mq_end_request() in ide_end_rq() which will call blk_account_io_completion() which tries to dereferences req->part which is never set. See ide_prep_sense() for an example of where these requests come from. To fix this, blk_account_io_completion() and blk_account_io_done() should do nothing if req->part is not set. The back trace of this bug is: BUG: kernel NULL pointer dereference, address: 000002ac #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 00000000 Oops: 0002 [#1] CPU: 0 PID: 237 Comm: kworker/0:1H Not tainted 5.4.0-rc2-00011-g48d9b0d43105e #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Workqueue: kblockd drive_rq_insert_work EIP: blk_account_io_completion+0x7a/0xf0 Code: 89 54 24 08 31 d2 89 4c 24 04 31 c9 c7 04 24 02 00 00 00 c1 ee 09 e8 f5 21 a6 ff e8 70 5c a7 ff 8b 53 60 8d 04 bd 00 00 00 00 <01> b4 02 ac 02 00 00 8b 9a 88 02 00 00 85 db 74 11 85 d2 74 51 8b EAX: 00000000 EBX: f5b80000 ECX: 00000000 EDX: 00000000 ESI: 00000000 EDI: 00000000 EBP: f3031e70 ESP: f3031e54 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010046 CR0: 80050033 CR2: 000002ac CR3: 03c25000 CR4: 000406d0 Call Trace: <IRQ> blk_update_request+0x85/0x420 ide_end_rq+0x38/0xa0 ide_complete_rq+0x3d/0x70 cdrom_newpc_intr+0x258/0xba0 ide_intr+0x135/0x250 __handle_irq_event_percpu+0x3e/0x250 handle_irq_event_percpu+0x1f/0x50 handle_irq_event+0x32/0x60 handle_level_irq+0x6c/0x110 handle_irq+0x72/0xa0 </IRQ> do_IRQ+0x45/0xad common_interrupt+0x115/0x11c Fixes: 48d9b0d43105 ("block: account statistics for passthrough requests") Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-12drm/amdgpu: avoid using invalidate semaphore for picassochangzhu1-8/+20
It may cause timeout waiting for sem acquire in VM flush when using invalidate semaphore for picasso. So it needs to avoid using invalidate semaphore for piasso. Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-12Revert "drm/amdgpu: dont schedule jobs while in reset"Alex Deucher1-4/+1
This reverts commit f2efc6e60089c99c342a6b7da47f1037e06c4296. This was fixed properly for 5.5, but came back via 5.4 merge into drm-next, so revert it again. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-12init: use do_mount() instead of ksys_mount()Dominik Brodowski3-16/+24
In prepare_namespace(), do_mount() can be used instead of ksys_mount() as the first and third argument are const strings in the kernel, the second and fourth argument are passed through anyway, and the fifth argument is NULL. In do_mount_root(), ksys_mount() is called with the first and third argument being already kernelspace strings, which do not need to be copied over from userspace to kernelspace (again). The second and fourth arguments are passed through to do_mount() anyway. The fifth argument, while already residing in kernelspace, needs to be put into a page of its own. Then, do_mount() can be used instead of ksys_mount(). Once this is done, there are no in-kernel users to ksys_mount() left, which can therefore be removed. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2019-12-12initrd: use do_mount() instead of ksys_mount()Dominik Brodowski1-3/+3
All three calls to ksys_mount() in initrd-related kernel code can be switched over to do_mount(): - the first and third arguments are const strings in the kernel, and do not need to be copied over from userspace; - the fifth argument is NULL, and therefore no page needs to be, copied over from userspace; - the second and fourth argument are passed through anyway. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2019-12-12devtmpfs: use do_mount() instead of ksys_mount()Dominik Brodowski3-6/+6
In devtmpfs, do_mount() can be called directly instead of complex wrapping by ksys_mount(): - the first and third arguments are const strings in the kernel, and do not need to be copied over from userspace; - the fifth argument is NULL, and therefore no page needs to be copied over from userspace; - the second and fourth argument are passed through anyway. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2019-12-12usb: dwc3: pci: add ID for the Intel Comet Lake -H variantHeikki Krogerus1-1/+5
The original ID that was added for Comet Lake PCH was actually for the -LP (low power) variant even though the constant for it said CMLH. Changing that while at it. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Felipe Balbi <balbi@kernel.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191212093713.60614-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-12interconnect: qcom: msm8974: Walk the list safely on node removalGeorgi Djakov1-4/+4
As we will remove items off the list using list_del(), we need to use the safe version of list_for_each_entry(). Fixes: 4e60a9568dc6 ("interconnect: qcom: add msm8974 driver") Reported-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20191212075332.16202-5-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-12interconnect: qcom: qcs404: Walk the list safely on node removalGeorgi Djakov1-4/+4
As we will remove items off the list using list_del(), we need to use the safe version of list_for_each_entry(). Fixes: 5e4e6c4d3ae0 ("interconnect: qcom: Add QCS404 interconnect provider driver") Reported-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Cc: <stable@vger.kernel.org> # v5.4 Link: https://lore.kernel.org/r/20191212075332.16202-4-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-12interconnect: qcom: sdm845: Walk the list safely on node removalGeorgi Djakov1-2/+2
As we will remove items off the list using list_del(), we need to use the safe version of list_for_each_entry(). Fixes: b5d2f741077a ("interconnect: qcom: Add sdm845 interconnect provider driver") Reported-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Cc: <stable@vger.kernel.org> # v5.3+ Link: https://lore.kernel.org/r/20191212075332.16202-3-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-12interconnect: qcom: Fix Kconfig indentationKrzysztof Kozlowski1-7/+7
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20191212075332.16202-2-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-12nios2: Fix ioremapGuenter Roeck1-0/+8
Commit 5ace77e0b41a ("nios2: remove __ioremap") removed the following code, with the argument that cacheflag is always 0 and the expression would therefore always be false. if (IS_MAPPABLE_UNCACHEABLE(phys_addr) && IS_MAPPABLE_UNCACHEABLE(last_addr) && !(cacheflag & _PAGE_CACHED)) return (void __iomem *)(CONFIG_NIOS2_IO_REGION_BASE + phys_addr); This did not take the "!" in the expression into account. Result is that nios2 images no longer boot. Restoring the removed code fixes the problem. Fixes: 5ace77e0b41a ("nios2: remove __ioremap") Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-12-12crypto: arm/curve25519 - add arch-specific key generation functionJason A. Donenfeld1-0/+7
Somehow this was forgotten when Zinc was being split into oddly shaped pieces, resulting in linker errors. The x86_64 glue has a specific key generation implementation, but the Arm one does not. However, it can still receive the NEON speedups by calling the ordinary DH function using the base point. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-11io_uring: ensure we return -EINVAL on unknown opcodeJens Axboe2-24/+36
If we submit an unknown opcode and have fd == -1, io_op_needs_file() will return true as we default to needing a file. Then when we go and assign the file, we find the 'fd' invalid and return -EBADF. We really should be returning -EINVAL for that case, as we normally do for unsupported opcodes. Change io_op_needs_file() to have the following return values: 0 - does not need a file 1 - does need a file < 0 - error value and use this to pass back the right value for this invalid case. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-11pipe: simplify signal handling in pipe_read() and add commentsLinus Torvalds1-7/+29
There's no need to separately check for signals while inside the locked region, since we're going to do "wait_event_interruptible()" right afterwards anyway, and the error handling is much simpler there. The check for whether we had already read anything was also redundant, since we no longer do the odd merging of reads when there are pending writers. But perhaps more importantly, this adds commentary about why we still need to wake up possible writers even though we didn't read any data, and why we can skip all the finishing touches now if we get a signal (or had a signal pending) while waiting for more data. [ This is a split-out cleanup from my "make pipe IO use exclusive wait queues" thing, which I can't apply because it triggers a nasty bug in the GNU make jobserver - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-11drm/amdgpu: fix license on Kconfig and MakefilesAlex Deucher7-4/+7
amdgpu is MIT licensed. Fixes: ec8f24b7faaf3d ("treewide: Add SPDX license identifier - Makefile/Kconfig") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amdgpu/gfx10: update gfx golden settings for navi14Tianci.Yin1-0/+2
add registers: mmPA_SC_BINNER_TIMEOUT_COUNTER and mmPA_SC_ENHANCE_2 Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amdgpu/gfx10: update gfx golden settingsTianci.Yin1-0/+2
add registers: mmPA_SC_BINNER_TIMEOUT_COUNTER and mmPA_SC_ENHANCE_2 Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amdgpu/gfx10: update gfx golden settings for navi14Tianci.Yin1-0/+1
add registers: mmSPI_CONFIG_CNTL Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amdgpu/gfx10: update gfx golden settingsTianci.Yin1-0/+1
add registers: mmSPI_CONFIG_CNTL Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11s390/kasan: add KASAN_VMALLOC supportVasily Gorbik2-12/+57
Add KASAN_VMALLOC support which now enables vmalloc memory area access checks as well as enables usage of VMAP_STACK under kasan. KASAN_VMALLOC changes the way vmalloc and modules areas shadow memory is handled. With this new approach only top level page tables are pre-populated and lower levels are filled dynamically upon memory allocation. Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-12-11s390: remove last diag 0x44 callerHeiko Carstens3-26/+5
diag 0x44 is a voluntary undirected yield of a virtual CPU. This has caused a lot of performance issues in the past. There is only one caller left, and that one is only executed if diag 0x9c (directed yield) is not present. Given that all hypervisors implement diag 0x9c anyway, remove the last diag 0x44 to avoid that more callers will be added. Worst case that could happen now, if diag 0x9c is not present, is that a virtual CPU would loop a bit instead of giving its time slice up. diag 0x44 statistics in debugfs are kept and will always be zero, so that user space can tell that there are no calls. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-12-11s390/uv: use EOPNOTSUPP instead of ENOTSUPPChristian Borntraeger1-1/+1
ENOTSUP is just an internal kernel error and should never reach userspace. The return value of the share function is not exported to userspace, but to avoid giving bad examples let us use EOPNOTSUPP: Suggested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-12-11s390/cpum_sf: Avoid SBD overflow condition in irq handlerThomas Richter1-6/+0
The s390 CPU Measurement sampling facility has an overflow condition which fires when all entries in a SBD are used. The measurement alert interrupt is triggered and reads out all samples in this SDB. It then tests the successor SDB, if this SBD is not full, the interrupt handler does not read any samples at all from this SDB The design waits for the hardware to fill this SBD and then trigger another meassurement alert interrupt. This scheme works nicely until an perf_event_overflow() function call discards the sample due to a too high sampling rate. The interrupt handler has logic to read out a partially filled SDB when the perf event overflow condition in linux common code is met. This causes the CPUM sampling measurement hardware and the PMU device driver to operate on the same SBD's trailer entry. This should not happen. This can be seen here using this trace: cpumsf_pmu_add: tear:0xb5286000 hw_perf_event_update: sdbt 0xb5286000 full 1 over 0 flush_all:0 hw_perf_event_update: sdbt 0xb5286008 full 0 over 0 flush_all:0 above shows 1. interrupt hw_perf_event_update: sdbt 0xb5286008 full 1 over 0 flush_all:0 hw_perf_event_update: sdbt 0xb5286008 full 0 over 0 flush_all:0 above shows 2. interrupt ... this goes on fine until... hw_perf_event_update: sdbt 0xb5286068 full 1 over 0 flush_all:0 perf_push_sample1: overflow one or more samples read from the IRQ handler are rejected by perf_event_overflow() and the IRQ handler advances to the next SDB and modifies the trailer entry of a partially filled SDB. hw_perf_event_update: sdbt 0xb5286070 full 0 over 0 flush_all:1 timestamp: 14:32:52.519953 Next time the IRQ handler is called for this SDB the trailer entry shows an overflow count of 19 missed entries. hw_perf_event_update: sdbt 0xb5286070 full 1 over 19 flush_all:1 timestamp: 14:32:52.970058 Remove access to a follow on SDB when event overflow happened. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-12-11s390/cpum_sf: Adjust sampling interval to avoid hitting sample limitsThomas Richter1-0/+16
Function perf_event_ever_overflow() and perf_event_account_interrupt() are called every time samples are processed by the interrupt handler. However function perf_event_account_interrupt() has checks to avoid being flooded with interrupts (more then 1000 samples are received per task_tick). Samples are then dropped and a PERF_RECORD_THROTTLED is added to the perf data. The perf subsystem limit calculation is: maximum sample frequency := 100000 --> 1 samples per 10 us task_tick = 10ms = 10000us --> 1000 samples per task_tick The work flow is measurement_alert() uses SDBT head and each SBDT points to 511 SDB pages, each with 126 sample entries. After processing 8 SBDs and for each valid sample calling: perf_event_overflow() perf_event_account_interrupts() there is a considerable amount of samples being dropped, especially when the sample frequency is very high and near the 100000 limit. To avoid the high amount of samples being dropped near the end of a task_tick time frame, increment the sampling interval in case of dropped events. The CPU Measurement sampling facility on the s390 supports only intervals, specifiing how many CPU cycles have to be executed before a sample is generated. Increase the interval when the samples being generated hit the task_tick limit. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-12-11s390/test_unwind: fix spelling mistake "reqister" -> "register"Colin Ian King1-1/+1
There is a spelling mistake in a pr_info message. Fix it. Link: https://lkml.kernel.org/r/20191202090215.28766-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-12-11s390/spinlock: remove confusing comment in arch_spin_lock_waitVasily Gorbik1-1/+0
arch_spin_lock_wait does not take steal time into consideration. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-12-11md: make sure desc_nr less than MD_SB_DISKSYufen Yu1-0/+1
For super_90_load, we need to make sure 'desc_nr' less than MD_SB_DISKS, avoiding invalid memory access of 'sb->disks'. Fixes: 228fc7d76db6 ("md: avoid invalid memory access for array sb->dev_roles") Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-12-11md: raid1: check rdev before reference in raid1_sync_request funcZhiqiang Liu1-1/+1
In raid1_sync_request func, rdev should be checked before reference. Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-12-11raid5: need to set STRIPE_HANDLE for batch headGuoqing Jiang1-1/+1
With commit 6ce220dd2f8ea71d6afc29b9a7524c12e39f374a ("raid5: don't set STRIPE_HANDLE to stripe which is in batch list"), we don't want to set STRIPE_HANDLE flag for sh which is already in batch list. However, the stripe which is the head of batch list should set this flag, otherwise panic could happen inside init_stripe at BUG_ON(sh->batch_head), it is reproducible with raid5 on top of nvdimm devices per Xiao oberserved. Thanks for Xiao's effort to verify the change. Fixes: 6ce220dd2f8ea ("raid5: don't set STRIPE_HANDLE to stripe which is in batch list") Reported-by: Xiao Ni <xni@redhat.com> Tested-by: Xiao Ni <xni@redhat.com> Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-12-11afs: Show volume name in /proc/net/afs/<cell>/volumesDavid Howells1-3/+4
Show the name of each volume in /proc/net/afs/<cell>/volumes to make it easier to work out the name corresponding to a volume ID. This makes it easier to work out which mounts in /proc/mounts correspond to which volume ID. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
2019-12-11afs: Fix missing cell comparison in afs_test_super()David Howells1-0/+1
Fix missing cell comparison in afs_test_super(). Without this, any pair volumes that have the same volume ID will share a superblock, no matter the cell, unless they're in different network namespaces. Normally, most users will only deal with a single cell and so they won't see this. Even if they do look into a second cell, they won't see a problem unless they happen to hit a volume with the same ID as one they've already got mounted. Before the patch: # ls /afs/grand.central.org/archive linuxdev/ mailman/ moin/ mysql/ pipermail/ stage/ twiki/ # ls /afs/kth.se/ linuxdev/ mailman/ moin/ mysql/ pipermail/ stage/ twiki/ # cat /proc/mounts | grep afs none /afs afs rw,relatime,dyn,autocell 0 0 #grand.central.org:root.cell /afs/grand.central.org afs ro,relatime 0 0 #grand.central.org:root.archive /afs/grand.central.org/archive afs ro,relatime 0 0 #grand.central.org:root.archive /afs/kth.se afs ro,relatime 0 0 After the patch: # ls /afs/grand.central.org/archive linuxdev/ mailman/ moin/ mysql/ pipermail/ stage/ twiki/ # ls /afs/kth.se/ admin/ common/ install/ OldFiles/ service/ system/ bakrestores/ home/ misc/ pkg/ src/ wsadmin/ # cat /proc/mounts | grep afs none /afs afs rw,relatime,dyn,autocell 0 0 #grand.central.org:root.cell /afs/grand.central.org afs ro,relatime 0 0 #grand.central.org:root.archive /afs/grand.central.org/archive afs ro,relatime 0 0 #kth.se:root.cell /afs/kth.se afs ro,relatime 0 0 Fixes: ^1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Carsten Jacobi <jacobi@de.ibm.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Tested-by: Jonathan Billings <jsbillings@jsbillings.org> cc: Todd DeSantis <atd@us.ibm.com>
2019-12-11afs: Fix creation calls in the dynamic root to fail with EOPNOTSUPPDavid Howells1-0/+3
Fix the lookup method on the dynamic root directory such that creation calls, such as mkdir, open(O_CREAT), symlink, etc. fail with EOPNOTSUPP rather than failing with some odd error (such as EEXIST). lookup() itself tries to create automount directories when it is invoked. These are cached locally in RAM and not committed to storage. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Tested-by: Jonathan Billings <jsbillings@jsbillings.org>
2019-12-11afs: Fix mountpoint parsingDavid Howells1-2/+4
Each AFS mountpoint has strings that define the target to be mounted. This is required to end in a dot that is supposed to be stripped off. The string can include suffixes of ".readonly" or ".backup" - which are supposed to come before the terminal dot. To add to the confusion, the "fs lsmount" afs utility does not show the terminal dot when displaying the string. The kernel mount source string parser, however, assumes that the terminal dot marks the suffix and that the suffix is always "" and is thus ignored. In most cases, there is no suffix and this is not a problem - but if there is a suffix, it is lost and this affects the ability to mount the correct volume. The command line mount command, on the other hand, is expected not to include a terminal dot - so the problem doesn't arise there. Fix this by making sure that the dot exists and then stripping it when passing the string to the mount configuration. Fixes: bec5eb614130 ("AFS: Implement an autocell mount capability [ver #2]") Reported-by: Jonathan Billings <jsbillings@jsbillings.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Tested-by: Jonathan Billings <jsbillings@jsbillings.org>
2019-12-11dt-bindings: net: ti: cpsw-switch: update to fix commentsGrygorii Strashko1-15/+7
After original patch was merged there were additional comments/requests provided by Rob Herring [1]. Mostly they are related to json-schema usage, and this patch fixes them. Also SPDX-License-Identifier has been changed to (GPL-2.0-only OR BSD-2-Clause) as requested. [1] https://lkml.org/lkml/2019/11/21/875 Fixes: ef63fe72f698 ("dt-bindings: net: ti: add new cpsw switch driver bindings") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> [robh: Remove 2 more maxItems that aren't necessary] Signed-off-by: Rob Herring <robh@kernel.org>
2019-12-11dt-bindings: remoteproc: stm32: add wakeup-source propertyArnaud Pouliquen1-0/+2
If the optional wdg interrupt is defined, then this property may be defined. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-12-11xhci: make sure interrupts are restored to correct stateMathias Nyman1-6/+6
spin_unlock_irqrestore() might be called with stale flags after reading port status, possibly restoring interrupts to a incorrect state. If a usb2 port just finished resuming while the port status is read the spin lock will be temporary released and re-acquired in a separate function. The flags parameter is passed as value instead of a pointer, not updating flags properly before the final spin_unlock_irqrestore() is called. Cc: <stable@vger.kernel.org> # v3.12+ Fixes: 8b3d45705e54 ("usb: Fix xHCI host issues on remote wakeup.") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11xhci: handle some XHCI_TRUST_TX_LENGTH quirks cases as default behaviour.Mathias Nyman1-1/+2
xhci driver claims it needs XHCI_TRUST_TX_LENGTH quirk for both Broadcom/Cavium and a Renesas xHC controllers. The quirk was inteded for handling false "success" complete event for transfers that had data left untransferred. These transfers should complete with "short packet" events instead. In these two new cases the false "success" completion is reported after a "short packet" if the TD consists of several TRBs. xHCI specs 4.10.1.1.2 say remaining TRBs should report "short packet" as well after the first short packet in a TD, but this issue seems so common it doesn't make sense to add the quirk for all vendors. Turn these events into short packets automatically instead. This gets rid of the "The WARN Successful completion on short TX for slot 1 ep 1: needs XHCI_TRUST_TX_LENGTH quirk" warning in many cases. Cc: <stable@vger.kernel.org> Reported-by: Eli Billauer <eli.billauer@gmail.com> Reported-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Eli Billauer <eli.billauer@gmail.com> Tested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11xhci: Increase STS_HALT timeout in xhci_suspend()Kai-Heng Feng1-1/+1
I've recently observed failed xHCI suspend attempt on AMD Raven Ridge system: kernel: xhci_hcd 0000:04:00.4: WARN: xHC CMD_RUN timeout kernel: PM: suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 kernel: PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 kernel: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns -110 kernel: PM: Device 0000:04:00.4 failed to suspend async: error -110 Similar to commit ac343366846a ("xhci: Increase STS_SAVE timeout in xhci_suspend()") we also need to increase the HALT timeout to make it be able to suspend again. Cc: <stable@vger.kernel.org> # 5.2+ Fixes: f7fac17ca925 ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11usb: xhci: only set D3hot for pci deviceHenry Lin3-5/+16
Xhci driver cannot call pci_set_power_state() on non-pci xhci host controllers. For example, NVIDIA Tegra XHCI host controller which acts as platform device with XHCI_SPURIOUS_WAKEUP quirk set in some platform hits this issue during shutdown. Cc: <stable@vger.kernel.org> Fixes: 638298dc66ea ("xhci: Fix spurious wakeups after S5 on Haswell") Signed-off-by: Henry Lin <henryl@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11xhci: fix USB3 device initiated resume race with roothub autosuspendMathias Nyman2-2/+11
A race in xhci USB3 remote wake handling may force device back to suspend after it initiated resume siganaling, causing a missed resume event or warm reset of device. When a USB3 link completes resume signaling and goes to enabled (UO) state a interrupt is issued and the interrupt handler will clear the bus_state->port_remote_wakeup resume flag, allowing bus suspend. If the USB3 roothub thread just finished reading port status before the interrupt, finding ports still in suspended (U3) state, but hasn't yet started suspending the hub, then the xhci interrupt handler will clear the flag that prevented roothub suspend and allow bus to suspend, forcing all port links back to suspended (U3) state. Example case: usb_runtime_suspend() # because all ports still show suspended U3 usb_suspend_both() hub_suspend(); # successful as hub->wakeup_bits not set yet ==> INTERRUPT xhci_irq() handle_port_status() clear bus_state->port_remote_wakeup usb_wakeup_notification() sets hub->wakeup_bits; kick_hub_wq() <== END INTERRUPT hcd_bus_suspend() xhci_bus_suspend() # success as port_remote_wakeup bits cleared Fix this by increasing roothub usage count during port resume to prevent roothub autosuspend, and by making sure bus_state->port_remote_wakeup flag is only cleared after resume completion is visible, i.e. after xhci roothub returned U0 or other non-U3 link state link on a get port status request. Issue rootcaused by Chiasheng Lee Cc: <stable@vger.kernel.org> Cc: Lee, Hou-hsun <hou-hsun.lee@intel.com> Reported-by: Lee, Chiasheng <chiasheng.lee@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11xhci: Fix memory leak in xhci_add_in_port()Mika Westerberg1-0/+4
When xHCI is part of Alpine or Titan Ridge Thunderbolt controller and the xHCI device is hot-removed as a result of unplugging a dock for example, the driver leaks memory it allocates for xhci->usb3_rhub.psi and xhci->usb2_rhub.psi in xhci_add_in_port() as reported by kmemleak: unreferenced object 0xffff922c24ef42f0 (size 16): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 16 bytes): 21 00 0c 00 12 00 dc 05 23 00 e0 01 00 00 00 00 !.......#....... backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 unreferenced object 0xffff922c24ef3318 (size 8): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 8 bytes): 34 01 05 00 35 41 0a 00 4...5A.. backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 Fix this by calling kfree() for the both psi objects in xhci_mem_cleanup(). Cc: <stable@vger.kernel.org> # 4.4+ Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.