aboutsummaryrefslogtreecommitdiffstats
path: root/crypto (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-12-11crypto: cipher - remove crt_u.cipher (struct cipher_tfm)Eric Biggers3-72/+37
Of the three fields in crt_u.cipher (struct cipher_tfm), ->cit_setkey() is pointless because it always points to setkey() in crypto/cipher.c. ->cit_decrypt_one() and ->cit_encrypt_one() are slightly less pointless, since if the algorithm doesn't have an alignmask, they are set directly to ->cia_encrypt() and ->cia_decrypt(). However, this "optimization" isn't worthwhile because: - The "cipher" algorithm type is the only algorithm still using crt_u, so it's bloating every struct crypto_tfm for every algorithm type. - If the algorithm has an alignmask, this "optimization" actually makes things slower, as it causes 2 indirect calls per block rather than 1. - It adds extra code complexity. - Some templates already call ->cia_encrypt()/->cia_decrypt() directly instead of going through ->cit_encrypt_one()/->cit_decrypt_one(). - The "cipher" algorithm type never gives optimal performance anyway. For that, a higher-level type such as skcipher needs to be used. Therefore, just remove the extra indirection, and make crypto_cipher_setkey(), crypto_cipher_encrypt_one(), and crypto_cipher_decrypt_one() be direct calls into crypto/cipher.c. Also remove the unused function crypto_cipher_cast(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-11crypto: compress - remove crt_u.compress (struct compress_tfm)Eric Biggers3-21/+13
crt_u.compress (struct compress_tfm) is pointless because its two fields, ->cot_compress() and ->cot_decompress(), always point to crypto_compress() and crypto_decompress(). Remove this pointless indirection, and just make crypto_comp_compress() and crypto_comp_decompress() be direct calls to what used to be crypto_compress() and crypto_decompress(). Also remove the unused function crypto_comp_cast(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-11crypto: testmgr - generate inauthentic AEAD test vectorsEric Biggers2-73/+261
The whole point of using an AEAD over length-preserving encryption is that the data is authenticated. However currently the fuzz tests don't test any inauthentic inputs to verify that the data is actually being authenticated. And only two algorithms ("rfc4543(gcm(aes))" and "ccm(aes)") even have any inauthentic test vectors at all. Therefore, update the AEAD fuzz tests to sometimes generate inauthentic test vectors, either by generating a (ciphertext, AAD) pair without using the key, or by mutating an authentic pair that was generated. To avoid flakiness, only assume this works reliably if the auth tag is at least 8 bytes. Also account for the rfc4106, rfc4309, and rfc7539esp algorithms intentionally ignoring the last 8 AAD bytes, and for some algorithms doing extra checks that result in EINVAL rather than EBADMSG. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-11crypto: testmgr - create struct aead_extra_tests_ctxEric Biggers1-71/+99
In preparation for adding inauthentic input fuzz tests, which don't require that a generic implementation of the algorithm be available, refactor test_aead_vs_generic_impl() so that instead there's a higher-level function test_aead_extra() which initializes a struct aead_extra_tests_ctx and then calls test_aead_vs_generic_impl() with a pointer to that struct. As a bonus, this reduces stack usage. Also switch from crypto_aead_alg(tfm)->maxauthsize to crypto_aead_maxauthsize(), now that the latter is available in <crypto/aead.h>. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-11crypto: testmgr - test setting misaligned keysEric Biggers1-4/+69
The alignment bug in ghash_setkey() fixed by commit 5c6bc4dfa515 ("crypto: ghash - fix unaligned memory access in ghash_setkey()") wasn't reliably detected by the crypto self-tests on ARM because the tests only set the keys directly from the test vectors. To improve test coverage, update the tests to sometimes pass misaligned keys to setkey(). This applies to shash, ahash, skcipher, and aead. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-11crypto: testmgr - check skcipher min_keysizeEric Biggers1-0/+9
When checking two implementations of the same skcipher algorithm for consistency, require that the minimum key size be the same, not just the maximum key size. There's no good reason to allow different minimum key sizes. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-11crypto: testmgr - don't try to decrypt uninitialized buffersEric Biggers1-4/+16
Currently if the comparison fuzz tests encounter an encryption error when generating an skcipher or AEAD test vector, they will still test the decryption side (passing it the uninitialized ciphertext buffer) and expect it to fail with the same error. This is sort of broken because it's not well-defined usage of the API to pass an uninitialized buffer, and furthermore in the AEAD case it's acceptable for the decryption error to be EBADMSG (meaning "inauthentic input") even if the encryption error was something else like EINVAL. Fix this for skcipher by explicitly initializing the ciphertext buffer on error, and for AEAD by skipping the decryption test on error. Reported-by: Pascal Van Leeuwen <pvanleeuwen@verimatrix.com> Fixes: d435e10e67be ("crypto: testmgr - fuzz skciphers against their generic implementation") Fixes: 40153b10d91c ("crypto: testmgr - fuzz AEADs against their generic implementation") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-11crypto: shash - allow essiv and hmac to use OPTIONAL_KEY algorithmsEric Biggers3-5/+4
The essiv and hmac templates refuse to use any hash algorithm that has a ->setkey() function, which includes not just algorithms that always need a key, but also algorithms that optionally take a key. Previously the only optionally-keyed hash algorithms in the crypto API were non-cryptographic algorithms like crc32, so this didn't really matter. But that's changed with BLAKE2 support being added. BLAKE2 should work with essiv and hmac, just like any other cryptographic hash. Fix this by allowing the use of both algorithms without a ->setkey() function and algorithms that have the OPTIONAL_KEY flag set. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-11crypto: skcipher - remove crypto_skcipher_extsize()Eric Biggers1-6/+1
Due to the removal of the blkcipher and ablkcipher algorithm types, crypto_skcipher_extsize() now simply calls crypto_alg_extsize(). So remove it and just use crypto_alg_extsize(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-11crypto: skcipher - remove crypto_skcipher::decryptEric Biggers1-3/+1
Due to the removal of the blkcipher and ablkcipher algorithm types, crypto_skcipher::decrypt is now redundant since it always equals crypto_skcipher_alg(tfm)->decrypt. Remove it and update crypto_skcipher_decrypt() accordingly. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-11crypto: skcipher - remove crypto_skcipher::encryptEric Biggers1-2/+1
Due to the removal of the blkcipher and ablkcipher algorithm types, crypto_skcipher::encrypt is now redundant since it always equals crypto_skcipher_alg(tfm)->encrypt. Remove it and update crypto_skcipher_encrypt() accordingly. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-11crypto: skcipher - remove crypto_skcipher::setkeyEric Biggers1-2/+2
Due to the removal of the blkcipher and ablkcipher algorithm types, crypto_skcipher::setkey now always points to skcipher_setkey(). Simplify by removing this function pointer and instead just making skcipher_setkey() be crypto_skcipher_setkey() directly. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-11crypto: skcipher - remove crypto_skcipher::keysizeEric Biggers2-6/+7
Due to the removal of the blkcipher and ablkcipher algorithm types, crypto_skcipher::keysize is now redundant since it always equals crypto_skcipher_alg(tfm)->max_keysize. Remove it and update crypto_skcipher_default_keysize() accordingly. Also rename crypto_skcipher_default_keysize() to crypto_skcipher_max_keysize() to clarify that it specifically returns the maximum key size, not some unspecified "default". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-11crypto: skcipher - remove crypto_skcipher::ivsizeEric Biggers1-1/+0
Due to the removal of the blkcipher and ablkcipher algorithm types, crypto_skcipher::ivsize is now redundant since it always equals crypto_skcipher_alg(tfm)->ivsize. Remove it and update crypto_skcipher_ivsize() accordingly. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-11crypto: api - remove another reference to blkcipherEric Biggers1-1/+1
Update a comment to refer to crypto_alloc_skcipher() rather than crypto_alloc_blkcipher() (the latter having been removed). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-11crypto: pcrypt - Do not clear MAY_SLEEP flag in original requestHerbert Xu1-1/+0
We should not be modifying the original request's MAY_SLEEP flag upon completion. It makes no sense to do so anyway. Reported-by: Eric Biggers <ebiggers@kernel.org> Fixes: 5068c7a883d1 ("crypto: pcrypt - Add pcrypt crypto...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-11crypto: x86 - Regularize glue function prototypesKees Cook2-10/+14
The crypto glue performed function prototype casting via macros to make indirect calls to assembly routines. Instead of performing casts at the call sites (which trips Control Flow Integrity prototype checking), switch each prototype to a common standard set of arguments which allows the removal of the existing macros. In order to keep pointer math unchanged, internal casting between u128 pointers and u8 pointers is added. Co-developed-by: João Moreira <joao.moreira@intel.com> Signed-off-by: João Moreira <joao.moreira@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-11crypto: pcrypt - Avoid deadlock by using per-instance padata queuesHerbert Xu1-3/+33
If the pcrypt template is used multiple times in an algorithm, then a deadlock occurs because all pcrypt instances share the same padata_instance, which completes requests in the order submitted. That is, the inner pcrypt request waits for the outer pcrypt request while the outer request is already waiting for the inner. This patch fixes this by allocating a set of queues for each pcrypt instance instead of using two global queues. In order to maintain the existing user-space interface, the pinst structure remains global so any sysfs modifications will apply to every pcrypt instance. Note that when an update occurs we have to allocate memory for every pcrypt instance. Should one of the allocations fail we will abort the update without rolling back changes already made. The new per-instance data structure is called padata_shell and is essentially a wrapper around parallel_data. Reproducer: #include <linux/if_alg.h> #include <sys/socket.h> #include <unistd.h> int main() { struct sockaddr_alg addr = { .salg_type = "aead", .salg_name = "pcrypt(pcrypt(rfc4106-gcm-aesni))" }; int algfd, reqfd; char buf[32] = { 0 }; algfd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(algfd, (void *)&addr, sizeof(addr)); setsockopt(algfd, SOL_ALG, ALG_SET_KEY, buf, 20); reqfd = accept(algfd, 0, 0); write(reqfd, buf, 32); read(reqfd, buf, 16); } Reported-by: syzbot+56c7151cad94eec37c521f0e47d2eee53f9361c4@syzkaller.appspotmail.com Fixes: 5068c7a883d1 ("crypto: pcrypt - Add pcrypt crypto parallelization wrapper") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-11crypto: pcrypt - Fix user-after-free on module unloadHerbert Xu1-1/+2
On module unload of pcrypt we must unregister the crypto algorithms first and then tear down the padata structure. As otherwise the crypto algorithms are still alive and can be used while the padata structure is being freed. Fixes: 5068c7a883d1 ("crypto: pcrypt - Add pcrypt crypto...") Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-09treewide: Use sizeof_field() macroPankaj Bharadiya2-3/+3
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except at places where these are defined. Later patches will remove the unused definition of FIELD_SIZEOF(). This patch is generated using following script: EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h" git grep -l -e "\bFIELD_SIZEOF\b" | while read file; do if [[ "$file" =~ $EXCLUDE_FILES ]]; then continue fi sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file; done Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David Miller <davem@davemloft.net> # for net
2019-11-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds34-1855/+3302
Pull crypto updates from Herbert Xu: "API: - Add library interfaces of certain crypto algorithms for WireGuard - Remove the obsolete ablkcipher and blkcipher interfaces - Move add_early_randomness() out of rng_mutex Algorithms: - Add blake2b shash algorithm - Add blake2s shash algorithm - Add curve25519 kpp algorithm - Implement 4 way interleave in arm64/gcm-ce - Implement ciphertext stealing in powerpc/spe-xts - Add Eric Biggers's scalar accelerated ChaCha code for ARM - Add accelerated 32r2 code from Zinc for MIPS - Add OpenSSL/CRYPTOGRAMS poly1305 implementation for ARM and MIPS Drivers: - Fix entropy reading failures in ks-sa - Add support for sam9x60 in atmel - Add crypto accelerator for amlogic GXL - Add sun8i-ce Crypto Engine - Add sun8i-ss cryptographic offloader - Add a host of algorithms to inside-secure - Add NPCM RNG driver - add HiSilicon HPRE accelerator - Add HiSilicon TRNG driver" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (285 commits) crypto: vmx - Avoid weird build failures crypto: lib/chacha20poly1305 - use chacha20_crypt() crypto: x86/chacha - only unregister algorithms if registered crypto: chacha_generic - remove unnecessary setkey() functions crypto: amlogic - enable working on big endian kernel crypto: sun8i-ce - enable working on big endian crypto: mips/chacha - select CRYPTO_SKCIPHER, not CRYPTO_BLKCIPHER hwrng: ks-sa - Enable COMPILE_TEST crypto: essiv - remove redundant null pointer check before kfree crypto: atmel-aes - Change data type for "lastc" buffer crypto: atmel-tdes - Set the IV after {en,de}crypt crypto: sun4i-ss - fix big endian issues crypto: sun4i-ss - hide the Invalid keylen message crypto: sun4i-ss - use crypto_ahash_digestsize crypto: sun4i-ss - remove dependency on not 64BIT crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.c MAINTAINERS: Add maintainer for HiSilicon SEC V2 driver crypto: hisilicon - add DebugFS for HiSilicon SEC Documentation: add DebugFS doc for HiSilicon SEC crypto: hisilicon - add SRIOV for HiSilicon SEC ...
2019-11-22crypto: chacha_generic - remove unnecessary setkey() functionsEric Biggers1-15/+3
Use chacha20_setkey() and chacha12_setkey() from <crypto/internal/chacha.h> instead of defining them again in chacha_generic.c. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: mips/chacha - select CRYPTO_SKCIPHER, not CRYPTO_BLKCIPHEREric Biggers1-1/+1
Another instance of CRYPTO_BLKCIPHER made it in just after it was renamed to CRYPTO_SKCIPHER. Fix it. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: essiv - remove redundant null pointer check before kfreeChen Wandun1-2/+1
kfree has taken null pointer check into account. so it is safe to remove the unnecessary check. Signed-off-by: Chen Wandun <chenwandun@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: blake2b - rename tfm context and _setkey callbackDavid Sterba1-18/+18
The TFM context can be renamed to a more appropriate name and the local varaibles as well, using 'tctx' which seems to be more common than 'mctx'. The _setkey callback was the last one without the blake2b_ prefix, rename that too. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: blake2b - merge _update to api callbackDavid Sterba1-36/+30
Now that there's only one call to blake2b_update, we can merge it to the callback and simplify. The empty input check is split and the rest of code un-indented. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: blake2b - open code set last block helperDavid Sterba1-6/+2
The helper is trival and called once, inlining makes things simpler. There's a comment to tie it back to the idea behind the code. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: blake2b - delete unused structs or membersDavid Sterba1-30/+0
All the code for param block has been inlined, last_node and outlen from the state are not used or have become redundant due to other code. Remove it. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: blake2b - simplify key initDavid Sterba1-8/+6
The keyed init writes the key bytes to the input buffer and does an update. We can do that in two ways: fill the buffer and update immediatelly. This is what current blake2b_init_key does. Any other following _update or _final will continue from the updated state. The other way is to write the key and set the number of bytes to process at the next _update or _final, lazy evaluation. Which leads to the the simplified code in this patch. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: blake2b - merge blake2 init to api callbackDavid Sterba1-84/+19
The call chain from blake2b_init can be simplified because the param block is effectively zeros, besides the key. - blake2b_init0 zeroes state and sets IV - blake2b_init sets up param block with defaults (key and some 1s) - init with key, write it to the input buffer and recalculate state So the compact way is to zero out the state and initialize index 0 of the state directly with the non-zero values and the key. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: blake2b - merge _final implementation to callbackDavid Sterba1-25/+17
blake2b_final is called only once, merge it to the crypto API callback and simplify. This avoids the temporary buffer and swaps the bytes of internal buffer. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: ablkcipher - remove deprecated and unused ablkcipher supportArd Biesheuvel5-571/+1
Now that all users of the deprecated ablkcipher interface have been moved to the skcipher interface, ablkcipher is no longer used and can be removed. Reviewed-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: tcrypt - constify check alg listCorentin Labbe1-2/+2
this patchs constify the alg list because this list is never modified. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: curve25519 - x86_64 library and KPP implementationsJason A. Donenfeld1-0/+6
This implementation is the fastest available x86_64 implementation, and unlike Sandy2x, it doesn't requie use of the floating point registers at all. Instead it makes use of BMI2 and ADX, available on recent microarchitectures. The implementation was written by Armando Faz-Hernández with contributions (upstream) from Samuel Neves and me, in addition to further changes in the kernel implementation from us. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Samuel Neves <sneves@dei.uc.pt> Co-developed-by: Samuel Neves <sneves@dei.uc.pt> [ardb: - move to arch/x86/crypto - wire into lib/crypto framework - implement crypto API KPP hooks ] Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: curve25519 - implement generic KPP driverArd Biesheuvel3-0/+96
Expose the generic Curve25519 library via the crypto API KPP interface. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: curve25519 - add kpp selftestArd Biesheuvel2-0/+1231
In preparation of introducing KPP implementations of Curve25519, import the set of test cases proposed by the Zinc patch set, but converted to the KPP format. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: blake2s - x86_64 SIMD implementationJason A. Donenfeld1-0/+6
These implementations from Samuel Neves support AVX and AVX-512VL. Originally this used AVX-512F, but Skylake thermal throttling made AVX-512VL more attractive and possible to do with negligable difference. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Samuel Neves <sneves@dei.uc.pt> Co-developed-by: Samuel Neves <sneves@dei.uc.pt> [ardb: move to arch/x86/crypto, wire into lib/crypto framework] Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: blake2s - implement generic shash driverArd Biesheuvel3-0/+190
Wire up our newly added Blake2s implementation via the shash API. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: testmgr - add test cases for Blake2sArd Biesheuvel2-39/+280
As suggested by Eric for the Blake2b implementation contributed by David, introduce a set of test vectors for Blake2s covering different digest and key sizes. blake2s-128 blake2s-160 blake2s-224 blake2s-256 --------------------------------------------------- len=0 | klen=0 klen=1 klen=16 klen=32 len=1 | klen=16 klen=32 klen=0 klen=1 len=7 | klen=32 klen=0 klen=1 klen=16 len=15 | klen=1 klen=16 klen=32 klen=0 len=64 | klen=0 klen=1 klen=16 klen=32 len=247 | klen=16 klen=32 klen=0 klen=1 len=256 | klen=32 klen=0 klen=1 klen=16 Cc: David Sterba <dsterba@suse.com> Cc: Eric Biggers <ebiggers@google.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17int128: move __uint128_t compiler test to KconfigArd Biesheuvel1-1/+1
In order to use 128-bit integer arithmetic in C code, the architecture needs to have declared support for it by setting ARCH_SUPPORTS_INT128, and it requires a version of the toolchain that supports this at build time. This is why all existing tests for ARCH_SUPPORTS_INT128 also test whether __SIZEOF_INT128__ is defined, since this is only the case for compilers that can support 128-bit integers. Let's fold this additional test into the Kconfig declaration of ARCH_SUPPORTS_INT128 so that we can also use the symbol in Makefiles, e.g., to decide whether a certain object needs to be included in the first place. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: mips/poly1305 - incorporate OpenSSL/CRYPTOGAMS optimized implementationArd Biesheuvel1-0/+5
This is a straight import of the OpenSSL/CRYPTOGAMS Poly1305 implementation for MIPS authored by Andy Polyakov, a prior 64-bit only version of which has been contributed by him to the OpenSSL project. The file 'poly1305-mips.pl' is taken straight from this upstream GitHub repository [0] at commit d22ade312a7af958ec955620b0d241cf42c37feb, and already contains all the changes required to build it as part of a Linux kernel module. [0] https://github.com/dot-asm/cryptogams Co-developed-by: Andy Polyakov <appro@cryptogams.org> Signed-off-by: Andy Polyakov <appro@cryptogams.org> Co-developed-by: René van Dorst <opensource@vdorst.com> Signed-off-by: René van Dorst <opensource@vdorst.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: x86/poly1305 - expose existing driver as poly1305 libraryArd Biesheuvel1-0/+1
Implement the arch init/update/final Poly1305 library routines in the accelerated SIMD driver for x86 so they are accessible to users of the Poly1305 library interface as well. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: x86/poly1305 - depend on generic library not generic shashArd Biesheuvel2-8/+5
Remove the dependency on the generic Poly1305 driver. Instead, depend on the generic library so that we only reuse code without pulling in the generic skcipher implementation as well. While at it, remove the logic that prefers the non-SIMD path for short inputs - this is no longer necessary after recent FPU handling changes on x86. Since this removes the last remaining user of the routines exported by the generic shash driver, unexport them and make them static. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: poly1305 - expose init/update/final library interfaceArd Biesheuvel1-21/+1
Expose the existing generic Poly1305 code via a init/update/final library interface so that callers are not required to go through the crypto API's shash abstraction to access it. At the same time, make some preparations so that the library implementation can be superseded by an accelerated arch-specific version in the future. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: x86/poly1305 - unify Poly1305 state struct with generic codeArd Biesheuvel1-3/+3
In preparation of exposing a Poly1305 library interface directly from the accelerated x86 driver, align the state descriptor of the x86 code with the one used by the generic driver. This is needed to make the library interface unified between all implementations. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: poly1305 - move core routines into a separate libraryArd Biesheuvel4-192/+16
Move the core Poly1305 routines shared between the generic Poly1305 shash driver and the Adiantum and NHPoly1305 drivers into a separate library so that using just this pieces does not pull in the crypto API pieces of the generic Poly1305 routine. In a subsequent patch, we will augment this generic library with init/update/final routines so that Poyl1305 algorithm can be used directly without the need for using the crypto API's shash abstraction. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: chacha - unexport chacha_generic routinesArd Biesheuvel1-18/+8
Now that all users of generic ChaCha code have moved to the core library, there is no longer a need for the generic ChaCha skcpiher driver to export parts of it implementation for reuse by other drivers. So drop the exports, and make the symbols static. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: mips/chacha - wire up accelerated 32r2 code from ZincArd Biesheuvel1-0/+6
This integrates the accelerated MIPS 32r2 implementation of ChaCha into both the API and library interfaces of the kernel crypto stack. The significance of this is that, in addition to becoming available as an accelerated library implementation, it can also be used by existing crypto API code such as Adiantum (for block encryption on ultra low performance cores) or IPsec using chacha20poly1305. These are use cases that have already opted into using the abstract crypto API. In order to support Adiantum, the core assembler routine has been adapted to take the round count as a function argument rather than hardcoding it to 20. Co-developed-by: René van Dorst <opensource@vdorst.com> Signed-off-by: René van Dorst <opensource@vdorst.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: x86/chacha - expose SIMD ChaCha routine as library functionArd Biesheuvel1-0/+1
Wire the existing x86 SIMD ChaCha code into the new ChaCha library interface, so that users of the library interface will get the accelerated version when available. Given that calls into the library API will always go through the routines in this module if it is enabled, switch to static keys to select the optimal implementation available (which may be none at all, in which case we defer to the generic implementation for all invocations). Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: x86/chacha - depend on generic chacha library instead of crypto driverArd Biesheuvel1-1/+1
In preparation of extending the x86 ChaCha driver to also expose the ChaCha library interface, drop the dependency on the chacha_generic crypto driver as a non-SIMD fallback, and depend on the generic ChaCha library directly. This way, we only pull in the code we actually need, without registering a set of ChaCha skciphers that we will never use. Since turning the FPU on and off is cheap these days, simplify the SIMD routine by dropping the per-page yield, which makes for a cleaner switch to the library API as well. This also allows use to invoke the skcipher walk routines in non-atomic mode. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.