Age | Commit message (Collapse) | Author | Files | Lines |
|
With EDT model, SRTT no longer is inflated by pacing delays.
This means that RTO and some other xmit timers might be setup
incorrectly. This is particularly visible with either :
- Very small enforced pacing rates (SO_MAX_PACING_RATE)
- Reduced rto (from the default 200 ms)
This can lead to TCP flows aborts in the worst case,
or spurious retransmits in other cases.
For example, this session gets far more throughput
than the requested 80kbit :
$ netperf -H 127.0.0.2 -l 100 -- -q 10000
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.2 () port 0 AF_INET
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
540000 262144 262144 104.00 2.66
With the fix :
$ netperf -H 127.0.0.2 -l 100 -- -q 10000
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.2 () port 0 AF_INET
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
540000 262144 262144 104.00 0.12
EDT allows for better control of rtx timers, since TCP has
a better idea of the earliest departure time of each skb
in the rtx queue. We only have to eventually add to the
timer the difference of the EDT time with current time.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Static Checker Warnings:
drivers/net/ethernet/qlogic/qed/qed_main.c:1510 qed_fill_link_capability()
error: uninitialized symbol 'tcvr_state'.
drivers/net/ethernet/qlogic/qed/qed_mcp.c:1951 qed_mcp_trans_speed_mask()
error: uninitialized symbol 'transceiver_state'.
drivers/net/ethernet/qlogic/qed/qed_mcp.c:1951 qed_mcp_trans_speed_mask()
error: uninitialized symbol 'transceiver_type'.
Symbols tcvr_state, transceiver_state and transceiver_type
are initialized with respective default state.
Fixes: c56a8be7e7aa ("qed: Add supported link and advertise link to display in ethtool.")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rahul Verma <Rahul.Verma@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mentioned commit needs to be reverted because we cannot pass
string allocated on stack to request_irq(). This function stores
uses this pointer for later use (e.g. /proc/interrupts) so we need
to keep this string persistently.
Fixes: d6d9704af8f4 ("be2net: remove desc field from be_eq_obj")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit dd979b4df817e9976f18fb6f9d134d6bc4a3c317.
This broke tcp_poll for SMC fallback: An AF_SMC socket establishes an
internal TCP socket for the initial handshake with the remote peer.
Whenever the SMC connection can not be established this TCP socket is
used as a fallback. All socket operations on the SMC socket are then
forwarded to the TCP socket. In case of poll, the file->private_data
pointer references the SMC socket because the TCP socket has no file
assigned. This causes tcp_poll to wait on the wrong socket.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We observed that packets and bytes count are not reset
when user performs interface down. Eventually, tx queue is
exhausted and packets will not be sent out.
To avoid this problem, resets tx queue in ndo_stop.
Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Signed-off-by: Yoshitoyo Osaki <osaki.yoshitoyo@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a compatibility issue between RTL8211E implemented
in Developerbox and netsec ethernet controller IP.
Our MDIO controller stops MDC clock right after the write
access, but RTL8211E expects MDC clock must be kept toggling
for several clock cycle with MDIO high before entering
the IDLE state. Without keeping clock after write access,
write access is not correctly handled and register is not
updated.
To meet this requirement, netsec driver needs to issue dummy
read(e.g. read PHYID1(offset 0x2) register) right after write
access, to keep MDC clock.
We think this compatibility issue is a problem specific to
our MDIO controller and RTL8211E.
Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Signed-off-by: Yoshitoyo Osaki <osaki.yoshitoyo@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In ndo_stop, driver resets the netsec ethernet controller IP.
When the netsec IP is reset, HW running mode turns to NRM mode
and driver has to wait until this mode transition completes.
But mode transition to NRM will not complete if the PHY is
in normal operation state. Netsec IP requires PHY is in
power down state when it is reset.
This modification stops the PHY before resetting netsec.
Together with this modification, phy_addr is stored in netsec_priv
structure because ndev->phydev is not yet ready in ndo_init.
Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Signed-off-by: Yoshitoyo Osaki <osaki.yoshitoyo@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clang warns:
drivers/mfd/cros_ec_dev.c:509:40: warning: variable 'cros_ec_id' is not
needed and will not be emitted [-Wunneeded-internal-declaration]
static const struct platform_device_id cros_ec_id[] = {
^
1 warning generated.
Avoid this warning by adding it to the cros_ec_dev_driver definition
under the id_table member like all other platform drivers.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Replace of_match_device() with of_device_get_match_data(), which
slightly decreases lines of code and allows to move the DT table
next to the I2C table.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
This replaces all remaining unmanaged resources with device
managed ones, so that the remove function is no longer needed.
This makes the code slightly shorter and fixes two problems:
1. The hardware is disabled after the child devices have
been removed. Previously there was a potential race
condition.
2. The hardware is disabled when mfd_add_devices fails
during probe.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Use new descriptor based API instead of the legacy one.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add const attribute to all mfd_cell structures.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Disable IRQs during suspend/resume cycle to ensure handling of wakeup
interrupts (i.e. RTC wake alarm) after max8997_resume(). This way it can
be properly handled when I2C bus is finally available. This pattern is
also used in other MAX PMIC MFD drivers.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
IRQ wake up support for MAX8997 driver was initially configured by
respective property in pdata. However, after the driver conversion to
device-tree, setting it was left as 'todo'. Nowadays most of other PMIC MFD
drivers initialized from device-tree assume that they can be an irq wakeup
source, so enable it also for MAX8997. This fixes support for wakeup from
MAX8997 RTC alarm.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Don't populate the array mclk_name on the stack but instead make it
static. Makes the object code smaller by 23 bytes:
Before:
text data bss dec hex filename
38050 11604 64 49718 c236 linux/drivers/mfd/arizona-core.o
After:
text data bss dec hex filename
38027 11604 64 49695 c21f linux/drivers/mfd/arizona-core.o
(gcc version 8.2.0 x86_64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
There are few Intel MFD PMIC device drivers which I would like
to review.
Note, Intel MSIC is old system controller that based mostly on PMIC
integrated in it. Thus, I included it as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
1;5201;0c
Reduce size of duplicated comments by switching to use SPDX identifier.
No functional change.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Sort headers alphabetically for better maintenance.
No functional change.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Power button IRQ actually has a second level of interrupts to
distinguish between UI and POWER buttons. Moreover, current
implementation looks awkward in approach to handle second level IRQs by
first level related IRQ chip.
To address above issues, split power button IRQ to be chained as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Instead of open coding each data structure with regmap IRQresources,
use dedicated macro.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Instead of open coding each data structure with IRQ resources,
use dedicated macro.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Instead of open coding each data structure with IRQ resources,
use dedicated macro.
In one case use DEFINE_RES_IRQ_NAMED() and DEFINE_RES_MEM_NAMED().
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add support for the audio-codec node by converting from
devm_of_platform_populate() to devm_mfd_add_devices().
Tested-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
When trying to read any MC13892 ADC channel on a imx51-babbage board:
The MC13892 PMIC shutdowns completely.
After debugging this issue and comparing the MC13892 and MC13783
initializations done in the vendor kernel, it was noticed that the
CHRGRAWDIV bit of the ADC0 register was not being set.
This bit is set by default after power on, but the driver was
clearing it.
After setting this bit it is possible to read the ADC values correctly.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
The madera_irqchip_pdata struct was replaced by the irq_flags
member of struct madera_pdata so the forward reference is
obsolete.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
While polling for BOOT_DONE the chip could NAK a read because it is
still booting, which would terminate the regmap_read_poll_timeout()
with an error.
Instead implement a polling loop that ignores read errors so we
always poll until the chip signals boot or the loop times out.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Don't call runtime_put_sync when clk32k_ref is ARIZONA_32KZ_MCLK2
as there is no corresponding runtime_get_sync call.
MCLK1 is not in the AoD power domain so if it is used as 32kHz clock
source we need to hold a runtime PM reference to keep the device from
going into low power mode.
Fixes: cdd8da8cc66b ("mfd: arizona: Add gating of external MCLKn clocks")
Signed-off-by: Sapthagiri Baratam <sapthagiri.baratam@cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|