aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/acpi/acpica/rsserial.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-02-24ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formattingErik Schmauss1-5/+5
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-18ACPICA: adding SPDX headersErik Schmauss1-37/+1
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-06ACPICA: All acpica: Update copyrights to 2018Bob Moore1-1/+1
including tool signons. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: ACPI 6.2: Add support for PinGroupConfig() resourceMika Westerberg1-0/+80
ACPICA commit 08b83591c0db751769d61fa889f4f50f575aeffb PinGroupConfig() is analogous to PinGroupFunction() but instead of mode (muxing), it is used to apply specific fine-grained configuration to a set of referenced pins. The format of this new resource is: PinGroupConfig (Shared/Exclusive, PinConfigType, PinConfigValue, ResourceSource, ResourceSourceIndex, ResourceSourceLabel, ResourceUsage, DescriptorName, VendorData) The PinConfigType/PinConfigValue are the same used by PinConfig() resource. Here also the combination of ResourceSource and ResourceSourceLabel is used to specify the PinGroup() this resource refers to. Link: https://github.com/acpica/acpica/commit/08b83591 Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: ACPI 6.2: Add support for PinGroupFunction() resourceMika Westerberg1-0/+77
ACPICA commit bd9a745749eac7137cd23085e6bdeb322de14ea2 PinGroupFunction() is a new resource introduced with ACPI 6.2. It is used with PinGroup() to configure specific mode for a set of pins exposed by a GPIO controller. The format of the resource is: PinGroupFunction (Shared/Exclusive, FunctionNumber, ResourceSource, ResourceSourceIndex, ResourceSourceLabel, ResourceUsage, DescriptorName, VendorData) The resource_source and ResourceSourceLabel fields are used to specify the PinGroup() resource referenced by PinGroupFunction(). Device (GPIO) { Name (_CRS, ResourceTemplate () { PinGroup ("group1") {2, 3} PinGroup ("group2") {4, 5} ... }) } Device (I2C) { Name (_CRS, ResourceTemplate () { PinGroupFunction (Exclusive, 6, "^GPIO", 0, "mygroup2") }) } In the above example the PinGroupFunction() references the second PinGroup() resource (using label "mygroup2" and configures pins 4 and 5 into mode 6. Link: https://github.com/acpica/acpica/commit/bd9a7457 Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: ACPI 6.2: Add support for PinGroup() resourceMika Westerberg1-0/+62
ACPICA commit 7d928e3174fb19d7dc0066b03c30bea07c001563 ACPI 6.2 introduced a new resource that is used to declare set of pins belonging to a GPIO controller. This resource is referenced by new PinGroupFunction() and PinGroupConfig() resources using ResourceSource and ResourceLabel fields. The PinGroup() resource looks like this: PinGroup (ResourceLabel, ResourceUsage, DescriptorName, VendorData) {Pin List} This resource should be listed in _CRS under the GPIO/pincontroller device providing these pins. Link: https://github.com/acpica/acpica/commit/7d928e31 Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: ACPI 6.2: Add support for PinConfig() resourceMika Westerberg1-0/+78
ACPICA commit a06fdba686cefccd5dd5b93b52fa0f1e3f984906 ACPI 6.2 introduced a new resource that is used to specify fine-grained configuration of a pin or set of pins used by a device. The ASL syntax of this new resource looks like: PinConfig (Shared/Exclusive, PinConfigType, PinConfigValue, ResourceSource, ResourceSourceIndex, ResourceUsage, DescriptorName, Vendordata) {Pin List} PinConfigType is an integer with following accepted values: 0x00 (Default) - No configuration is applied to the pin 0x01 (Bias Pull-up) - Pin is pulled up using certain size resistor 0x02 (Bias Pull-down) - Pin is pulled down using certain size resistor 0x03 (Bias Default) - Set to default biasing 0x04 (Bias Disable) - All bias settings will be disabled 0x05 (Bias High Impedance) - Configure the pin as hi_z 0x06 (Bias Bus Hold) - Configure the pin in a weak latch state where it drives the last value on a tristate bus 0x07 (Drive Open Drain) - Configure the pin into open drain state 0x08 (Drive Open Source) - Configure the pin into open source state 0x09 (Drive Push Pull) - Configure the pin into push-pull state 0x0a (Drive Strength) - How much the pin can supply current 0x0b (Slew Rate) - Configure slew rate of the pin 0x0c (Input Debounce) - Enable input debouncer for the pin 0x0d (Input Schmitt Trigger) - Enable schmitt trigger for the pin 0x0e - 0x7f - Reserved 0x80 - 0xff - Vendor defined types The PinConfigValue depends on the type and is expressed as units suitable for that type (for example bias uses Ohms). Link: https://github.com/acpica/acpica/commit/a06fdba6 Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: ACPI 6.2: Add support for PinFunction() resourceMika Westerberg1-0/+76
ACPICA commit 6bbc6357f7061f1243601adde0ea45f7a89274e0 ACPI 6.2 introduced a new resource that is used to describe how certain pins are muxed for a device. The ASL syntax of this new resource looks like below: PinFunction(Shared, PinConfig, FunctionNumber, ResourceSource, ResourceSourceIndex, ResourceUsage, DescriptorName, VendorData) {Pin List} Which is pretty similar to GpioIo()/GpioInt() resources. Teach ACPICA about this new resource. Link: https://github.com/acpica/acpica/commit/6bbc6357 Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-09ACPICA: Source tree: Update copyright notices to 2017Bob Moore1-1/+1
ACPICA commit 16577e5265923f4999b4d2c0addb2343b18135e1 Affects all files. Link: https://github.com/acpica/acpica/commit/16577e52 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05ACPICA: ACPI 6.0, tools/iasl: Add support for new resource descriptorsBob Moore1-3/+18
ACPICA commit 5a0555ece4ba9917e5842b21d88469ae06b4e815 Adds full support for: i2c_serial_bus_v2 spi_serial_bus_v2 uart_serial_bus_v2 Compiler, Disassembler, Resource Manager, acpi_help. Link: https://github.com/acpica/acpica/commit/5a0555ec Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-15ACPICA: Additional 2016 copyright changesBob Moore1-1/+1
All tool/utility signons. Dual-license module header. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-05ACPICA: Update Copyright headers to 2015David E. Box1-1/+1
ACPICA commit 8990e73ab2aa15d6a0068b860ab54feff25bee36 Link: https://github.com/acpica/acpica/commit/8990e73a Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-11ACPICA: Update ACPICA copyrights to 2014.Bob Moore1-1/+1
Update ACPICA copyrights to 2014. Includes all source headers and signons for the various tools. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-25ACPICA: Update ACPICA copyrights to 2013Bob Moore1-1/+1
Includes all source headers and signons for the various tools. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-10ACPICA: Resources: Split interrupt share/wake bits into two fields.Bob Moore1-2/+6
These two bits are merged at the external interface level for the IRQ, Interrupt, and GpioInt resource descriptors. However, these bits are logically independent and there is no need to keep them merged internally. Therefore, this change splits the bits into "sharable" and "wake capable" fields within the resource manager. This simplifies drive code that needs to examine these bits. Aaron Lu, Bob Moore. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-01-17ACPICA: Update all copyrights to 2012Bob Moore1-1/+1
Update all copyrights to 2012. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI 5.0: Support for all new resource descriptorsLin Ming1-0/+441
FixedDMA, GPIO descriptors, SerialBus descriptors Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.