aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/acpi/nfit (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-3/+4
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-03acpi, nfit: Remove ecc_unit_sizeDan Williams1-11/+0
The "Clear Error Unit" may be smaller than the ECC unit size on some devices. For example, poison may be tracked at 64-byte alignment even though the ECC unit is larger. Unless / until the ACPI specification provides a non-ambiguous way to communicate this property do not expose this to userspace. Software that had been using this property must already be prepared for the case where the property is not provided on older kernels, so it is safe to remove this attribute. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-04-10Merge tag 'libnvdimm-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds3-367/+339
Pull libnvdimm updates from Dan Williams: "This cycle was was not something I ever want to repeat as there were several late changes that have only now just settled. Half of the branch up to commit d2c997c0f145 ("fs, dax: use page->mapping to warn...") have been in -next for several releases. The of_pmem driver and the address range scrub rework were late arrivals, and the dax work was scaled back at the last moment. The of_pmem driver missed a previous merge window due to an oversight. A sense of obligation to rectify that miss is why it is included for 4.17. It has acks from PowerPC folks. Stephen reported a build failure that only occurs when merging it with your latest tree, for now I have fixed that up by disabling modular builds of of_pmem. A test merge with your tree has received a build success report from the 0day robot over 156 configs. An initial version of the ARS rework was submitted before the merge window. It is self contained to libnvdimm, a net code reduction, and passing all unit tests. The filesystem-dax changes are based on the wait_var_event() functionality from tip/sched/core. However, late review feedback showed that those changes regressed truncate performance to a large degree. The branch was rewound to drop the truncate behavior change and now only includes preparation patches and cleanups (with full acks and reviews). The finalization of this dax-dma-vs-trnucate work will need to wait for 4.18. Summary: - A rework of the filesytem-dax implementation provides for detection of unmap operations (truncate / hole punch) colliding with in-progress device-DMA. A fix for these collisions remains a work-in-progress pending resolution of truncate latency and starvation regressions. - The of_pmem driver expands the users of libnvdimm outside of x86 and ACPI to describe an implementation of persistent memory on PowerPC with Open Firmware / Device tree. - Address Range Scrub (ARS) handling is completely rewritten to account for the fact that ARS may run for 100s of seconds and there is no platform defined way to cancel it. ARS will now no longer block namespace initialization. - The NVDIMM Namespace Label implementation is updated to handle label areas as small as 1K, down from 128K. - Miscellaneous cleanups and updates to unit test infrastructure" * tag 'libnvdimm-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (39 commits) libnvdimm, of_pmem: workaround OF_NUMA=n build error nfit, address-range-scrub: add module option to skip initial ars nfit, address-range-scrub: rework and simplify ARS state machine nfit, address-range-scrub: determine one platform max_ars value powerpc/powernv: Create platform devs for nvdimm buses doc/devicetree: Persistent memory region bindings libnvdimm: Add device-tree based driver libnvdimm: Add of_node to region and bus descriptors libnvdimm, region: quiet region probe libnvdimm, namespace: use a safe lookup for dimm device name libnvdimm, dimm: fix dpa reservation vs uninitialized label area libnvdimm, testing: update the default smart ctrl_temperature libnvdimm, testing: Add emulation for smart injection commands nfit, address-range-scrub: introduce nfit_spa->ars_state libnvdimm: add an api to cast a 'struct nd_region' to its 'struct device' nfit, address-range-scrub: fix scrub in-progress reporting dax, dm: allow device-mapper to operate without dax support dax: introduce CONFIG_DAX_DRIVER fs, dax: use page->mapping to warn if truncate collides with a busy page ext2, dax: introduce ext2_dax_aops ...
2018-04-09Merge branch 'for-4.17/libnvdimm' into libnvdimm-for-nextDan Williams3-367/+339
2018-04-07nfit, address-range-scrub: add module option to skip initial arsDan Williams1-0/+7
After attempting to quickly retrieve known errors the kernel proceeds to kick off a long running ARS. Add a module option to disable this behavior at initialization time, or at new region discovery time. Otherwise, ARS can be started manually regardless of the state of this setting. Co-developed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-04-07nfit, address-range-scrub: rework and simplify ARS state machineDan Williams2-268/+218
ARS is an operation that can take 10s to 100s of seconds to find media errors that should rarely be present. If the platform crashes due to media errors in persistent memory, the expectation is that the BIOS will report those known errors in a 'short' ARS request. A 'short' ARS request asks platform firmware to return an ARS payload with all known errors, but without issuing a 'long' scrub. At driver init a short request is issued to all PMEM ranges before registering regions. Then, in the background, a long ARS is scheduled for each region. The ARS implementation is simplified to centralize ARS completion work in the ars_complete() helper. The timeout is removed since there is no facility to cancel ARS, and this otherwise arranges for system init to never be blocked waiting for a 'long' ARS. The ars_state flags are used to coordinate ARS requests from driver init, ARS requests from userspace, and ARS requests in response to media error notifications. Given that there is no notification of ARS completion the implementation still needs to poll. It backs off exponentially to a maximum poll period of 30 minutes. Suggested-by: Toshi Kani <toshi.kani@hpe.com> Co-developed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-04-07nfit, address-range-scrub: determine one platform max_ars valueDan Williams2-39/+41
acpi_nfit_query_poison() is awkward in that it requires an nfit_spa argument in order to determine what max_ars value to use. Instead probe for the minimum max_ars across all scrub-capable ranges in the system and drop the nfit_spa argument. This enables a larger rework / simplification of the ARS state machine whereby the status can be retrieved once and then iterated over all address ranges to reap completions. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-04-05nfit, address-range-scrub: introduce nfit_spa->ars_stateDan Williams2-9/+18
In preparation for re-working the ARS implementation to better handle short vs long ARS runs, introduce nfit_spa->ars_state. For now this just replaces the nfit_spa->ars_required bit-field/flag, but going forward it will be used to track ARS completion and make short vs long ARS requests. Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-04-05Merge tag 'edac_for_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds1-0/+27
Pull EDAC updates from Borislav Petkov: "Noteworthy is the NVDIMM support: - NVDIMM support to EDAC (Tony Luck) - misc fixes" * tag 'edac_for_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, sb_edac: Remove variable length array usage EDAC, skx_edac: Detect non-volatile DIMMs firmware, DMI: Add function to look up a handle and return DIMM size acpi, nfit: Add function to look up nvdimm device and provide SMBIOS handle EDAC: Add new memory type for non-volatile DIMMs EDAC: Drop duplicated array of strings for memory type names EDAC, layerscape: Allow building for LS1021A
2018-04-03nfit, address-range-scrub: fix scrub in-progress reportingDan Williams1-1/+4
There is a small window whereby ARS scan requests can schedule work that userspace will miss when polling scrub_show. Hold the init_mutex lock over calls to report the status to close this potential escape. Also, make sure that requests to cancel the ARS workqueue are treated as an idle event. Cc: <stable@vger.kernel.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Fixes: 37b137ff8c83 ("nfit, libnvdimm: allow an ARS scrub...") Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-04-02nfit: fix region registration vs block-data-window rangesDan Williams1-8/+14
Commit 1cf03c00e7c1 "nfit: scrub and register regions in a workqueue" mistakenly attempts to register a region per BLK aperture. There is nothing to register for individual apertures as they belong as a set to a BLK aperture group that are registered with a corresponding DIMM-control-region. Filter them for registration to prevent some needless devm_kzalloc() allocations. Cc: <stable@vger.kernel.org> Fixes: 1cf03c00e7c1 ("nfit: scrub and register regions in a workqueue") Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-28acpi, nfit: rework NVDIMM leaf method detectionDan Williams2-23/+23
Some BIOSen do not handle 0-byte transfer lengths for the _LSR and _LSW (label storage read/write) methods. This causes Linux to fallback to the deprecated _DSM path, or otherwise disable label support. Introduce acpi_nvdimm_has_method() to detect whether a method is available rather than calling the method, require _LSI and _LSR to be paired, and require read support before enabling write support. Cc: <stable@vger.kernel.org> Fixes: 4b27db7e26cd ("acpi, nfit: add support for the _LS...") Suggested-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-21nfit: skip region registration for incomplete control regionsDan Williams1-7/+6
Per the ACPI specification the only functional purpose for a DIMM Control Region to be mapped into the system physical address space, from an OSPM perspective, is to support block-apertures. However, there are some BIOSen that publish DIMM Control Region SPA entries for pre-boot environment consumption. Undo the kernel policy of generating disabled 'ndblk' regions when this configuration is detected. Cc: <stable@vger.kernel.org> Fixes: 1f7df6f88b92 ("libnvdimm, nfit: regions (block-data-window...)") Reviewed-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-21libnvdimm, nfit: fix persistence domain reportingDan Williams1-3/+7
The persistence domain is a point in the platform where once writes reach that destination the platform claims it will make them persistent relative to power loss. In the ACPI NFIT this is currently communicated as 2 bits in the "NFIT - Platform Capabilities Structure". The bits comprise a hierarchy, i.e. bit0 "CPU Cache Flush to NVDIMM Durability on Power Loss Capable" implies bit1 "Memory Controller Flush to NVDIMM Durability on Power Loss Capable". Commit 96c3a239054a "libnvdimm: expose platform persistence attr..." shows the persistence domain as flags, but it's really an enumerated hierarchy. Fix this newly introduced user ABI to show the closest available persistence domain before userspace develops dependencies on seeing, or needing to develop code to tolerate, the raw NFIT flags communicated through the libnvdimm-generic region attribute. Fixes: 96c3a239054a ("libnvdimm: expose platform persistence attr...") Reviewed-by: Dave Jiang <dave.jiang@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-14acpi, nfit: Add function to look up nvdimm device and provide SMBIOS handleTony Luck1-0/+27
EDAC driver needs to look up attributes of NVDIMMs provided in SMBIOS. Provide a function that looks up an acpi_nfit_memory_map from a device handle (node/socket/mc/channel/dimm) and returns the SMBIOS handle. Also pass back the "flags" so we can see if the NVDIMM is OK. Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Aristeu Rozanski <aris@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Erik Schmauss <erik.schmauss@intel.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Len Brown <lenb@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Robert Moore <robert.moore@intel.com> Cc: devel@acpica.org Cc: linux-acpi@vger.kernel.org Cc: linux-nvdimm@lists.01.org Link: http://lkml.kernel.org/r/20180312182430.10335-4-tony.luck@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2018-03-05acpi, nfit: remove redundant __func__ in dev_dbgJohannes Thumshirn2-42/+38
Dynamic debug can be instructed to add the function name to the debug output using the +f switch, so there is no need for the nfit module to do it again. If a user decides to add the +f switch for nfit's dynamic debug this results in double prints of the function name like the following: [ 2391.935383] acpi_nfit_ctl: nfit ACPI0012:00: acpi_nfit_ctl:nmem8 cmd: 10: func: 1 input length: 0 Thus remove the stray __func__ printing. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-02-03Merge branch 'for-4.16/nfit' into libnvdimm-for-nextRoss Zwisler2-0/+24
2018-02-03Merge branch 'for-4.16/dax' into libnvdimm-for-nextRoss Zwisler1-1/+8
2018-02-02acpi, nfit: fix register dimm error handlingToshi Kani1-0/+3
A NULL pointer reference kernel bug was observed when acpi_nfit_add_dimm() called in acpi_nfit_register_dimms() failed. This error path does not set nfit_mem->nvdimm, but the 2nd list_for_each_entry() loop in the function assumes it's always set. Add a check to nfit_mem->nvdimm. Cc: <stable@vger.kernel.org> Fixes: ba9c8dd3c222 ("acpi, nfit: add dimm device notification support") Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-02-01acpi: nfit: add persistent memory control flag for nd_regionDave Jiang1-0/+3
Propagate the ADR attribute flag from the NFIT platform capabilities sub-table to nd_region. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
2018-02-01acpi: nfit: Add support for detect platform CPU cache flush on power lossDave Jiang2-0/+21
In ACPI 6.2a the platform capability structure has been added to the NFIT tables. That provides software the ability to determine whether a system supports the auto flushing of CPU caches on power loss. If the capability is supported, we do not need to do dax_flush(). Plumbing the path to set the property on per region from the NFIT tables. This patch depends on the ACPI NFIT 6.2a platform capabilities support code in include/acpi/actbl1.h. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
2017-12-04acpi, nfit: fix health event notificationDan Williams1-1/+8
Integration testing with a BIOS that generates injected health event notifications fails to communicate those events to userspace. The nfit driver neglects to link the ACPI DIMM device with the necessary driver data so acpi_nvdimm_notify() fails this lookup: nfit_mem = dev_get_drvdata(dev); if (nfit_mem && nfit_mem->flags_attr) sysfs_notify_dirent(nfit_mem->flags_attr); Add the necessary linkage when installing the notification handler and clean it up when the nfit driver instance is torn down. Cc: <stable@vger.kernel.org> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Fixes: ba9c8dd3c222 ("acpi, nfit: add dimm device notification support") Reported-by: Daniel Osawa <daniel.k.osawa@intel.com> Tested-by: Daniel Osawa <daniel.k.osawa@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-11-17Merge tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds3-14/+299
Pull libnvdimm and dax updates from Dan Williams: "Save for a few late fixes, all of these commits have shipped in -next releases since before the merge window opened, and 0day has given a build success notification. The ext4 touches came from Jan, and the xfs touches have Darrick's reviewed-by. An xfstest for the MAP_SYNC feature has been through a few round of reviews and is on track to be merged. - Introduce MAP_SYNC and MAP_SHARED_VALIDATE, a mechanism to enable 'userspace flush' of persistent memory updates via filesystem-dax mappings. It arranges for any filesystem metadata updates that may be required to satisfy a write fault to also be flushed ("on disk") before the kernel returns to userspace from the fault handler. Effectively every write-fault that dirties metadata completes an fsync() before returning from the fault handler. The new MAP_SHARED_VALIDATE mapping type guarantees that the MAP_SYNC flag is validated as supported by the filesystem's ->mmap() file operation. - Add support for the standard ACPI 6.2 label access methods that replace the NVDIMM_FAMILY_INTEL (vendor specific) label methods. This enables interoperability with environments that only implement the standardized methods. - Add support for the ACPI 6.2 NVDIMM media error injection methods. - Add support for the NVDIMM_FAMILY_INTEL v1.6 DIMM commands for latch last shutdown status, firmware update, SMART error injection, and SMART alarm threshold control. - Cleanup physical address information disclosures to be root-only. - Fix revalidation of the DIMM "locked label area" status to support dynamic unlock of the label area. - Expand unit test infrastructure to mock the ACPI 6.2 Translate SPA (system-physical-address) command and error injection commands. Acknowledgements that came after the commits were pushed to -next: - 957ac8c421ad ("dax: fix PMD faults on zero-length files"): Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> - a39e596baa07 ("xfs: support for synchronous DAX faults") and 7b565c9f965b ("xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()") Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>" * tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (49 commits) acpi, nfit: add 'Enable Latch System Shutdown Status' command support dax: fix general protection fault in dax_alloc_inode dax: fix PMD faults on zero-length files dax: stop requiring a live device for dax_flush() brd: remove dax support dax: quiet bdev_dax_supported() fs, dax: unify IOMAP_F_DIRTY read vs write handling policy in the dax core tools/testing/nvdimm: unit test clear-error commands acpi, nfit: validate commands against the device type tools/testing/nvdimm: stricter bounds checking for error injection commands xfs: support for synchronous DAX faults xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault() ext4: Support for synchronous DAX faults ext4: Simplify error handling in ext4_dax_huge_fault() dax: Implement dax_finish_sync_fault() dax, iomap: Add support for synchronous faults mm: Define MAP_SYNC and VM_SYNC flags dax: Allow tuning whether dax_insert_mapping_entry() dirties entry dax: Allow dax_iomap_fault() to return pfn dax: Fix comment describing dax_iomap_fault() ...
2017-11-15acpi, nfit: add 'Enable Latch System Shutdown Status' command supportDan Williams1-1/+2
The NVDIMM_FAMILY_INTEL 'Enable Latch System Shutdown Status' command indicates to the platform that system software has acknowledged the most recent unsafe shutdown status. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-11-12acpi, nfit: validate commands against the device typeDan Williams1-6/+9
Fix occasions in acpi_nfit_ctl where we check the command type without validating whether we are parsing dimm vs bus level commands. Where the command numbers alias between dimms and bus we can make the wrong assumption just checking the raw command number. For example, with a simple nfit_test mock up of the clear-error command we trigger the following: BUG: unable to handle kernel NULL pointer dereference at 0000000000000094 IP: acpi_nfit_ctl+0x29b/0x930 [nfit] [..] Call Trace: nfit_test_probe+0xb85/0xc09 [nfit_test] platform_drv_probe+0x3b/0xa0 ? platform_drv_probe+0x3b/0xa0 driver_probe_device+0x29c/0x450 ? test_alloc+0x180/0x180 [nfit_test] __driver_attach+0xe3/0xf0 ? driver_probe_device+0x450/0x450 bus_for_each_dev+0x73/0xc0 driver_attach+0x1e/0x20 bus_add_driver+0x173/0x270 driver_register+0x60/0xe0 __platform_driver_register+0x36/0x40 nfit_test_init+0x2a1/0x1000 [nfit_test] Fixes: 4b27db7e26cd ("acpi, nfit: add support for the _LSI, _LSR, and...") Reported-by: Vishal Verma <vishal.l.verma@intel.com> Tested-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-11-02libnvdimm: move poison list functions to a new 'badrange' fileDave Jiang2-2/+2
nfit_test needs to use the poison list manipulation code as well. Make it more generic and in the process rename poison to badrange, and move all the related helpers to a new file. Signed-off-by: Dave Jiang <dave.jiang@intel.com> [vishal: Add badrange.o to nfit_test's Kbuild] [vishal: add a missed include in bus.c for the new badrange functions] [vishal: rename all instances of 'be' to 'bre'] Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-30acpi, nfit: add support for NVDIMM_FAMILY_INTEL v1.6 DSMsDan Williams2-6/+65
Per v1.6 of the NVDIMM_FAMILY_INTEL command set [1] some of the new commands require rev-id 2. In addition to enabling ND_CMD_CALL for these new function numbers, add a lookup table for revision-ids by family and function number. [1]: http://pmem.io/documents/NVDIMM_DSM_Interface-V1.6.pdf Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-10-29acpi, nfit: hide unknown commands from nmemX/commandsDan Williams2-2/+14
For vendor specific commands that do not have a common kernel translation, hide them from nmemX/commands. For example, the following results from new enabling to probe for support of the new NVDIMM_FAMILY_INTEL DSMs specified in v1.6 of the command specification [1]: # cat /sys/bus/nd/devices/nmem0/commands smart smart_thresh flags get_size get_data set_data effect_size effect_log vendor cmd_call unknown unknown unknown unknown unknown unknown unknown unknown [1]: https://pmem.io/documents/NVDIMM_DSM_Interface-V1.6.pdf Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-10-07acpi, nfit: add support for the _LSI, _LSR, and _LSW label methodsDan Williams2-4/+212
ACPI 6.2 adds support for named methods to access the label storage area of an NVDIMM. We prefer these new methods if available and otherwise fallback to the NVDIMM_FAMILY_INTEL _DSMs. The kernel ioctls, ND_IOCTL_{GET,SET}_CONFIG_{SIZE,DATA}, remain generic and the driver translates the 'package' payloads into the NVDIMM_FAMILY_INTEL 'buffer' format to maintain compatibility with existing userspace and keep the output buffer parsing code in the driver common. The output payloads are mostly compatible save for the 'label area locked' status that moves from the 'config_size' (_LSI) command to the 'config_read' (_LSR) command status. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-10-07acpi nfit: Enable to show what feature is supported via ND_CMD_CALL for nfit_testYasunori Goto2-0/+2
Though nfit_test need to show what feature is supported via ND_CMD_CALL on device/nfit/dsm_mask, currently there is no way to tell it. This patch makes to enable it. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-09-11Merge tag 'libnvdimm-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds2-7/+45
Pull libnvdimm from Dan Williams: "A rework of media error handling in the BTT driver and other updates. It has appeared in a few -next releases and collected some late- breaking build-error and warning fixups as a result. Summary: - Media error handling support in the Block Translation Table (BTT) driver is reworked to address sleeping-while-atomic locking and memory-allocation-context conflicts. - The dax_device lookup overhead for xfs and ext4 is moved out of the iomap hot-path to a mount-time lookup. - A new 'ecc_unit_size' sysfs attribute is added to advertise the read-modify-write boundary property of a persistent memory range. - Preparatory fix-ups for arm and powerpc pmem support are included along with other miscellaneous fixes" * tag 'libnvdimm-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (26 commits) libnvdimm, btt: fix format string warnings libnvdimm, btt: clean up warning and error messages ext4: fix null pointer dereference on sbi libnvdimm, nfit: move the check on nd_reserved2 to the endpoint dax: fix FS_DAX=n BLOCK=y compilation libnvdimm: fix integer overflow static analysis warning libnvdimm, nd_blk: remove mmio_flush_range() libnvdimm, btt: rework error clearing libnvdimm: fix potential deadlock while clearing errors libnvdimm, btt: cache sector_size in arena_info libnvdimm, btt: ensure that flags were also unchanged during a map_read libnvdimm, btt: refactor map entry operations with macros libnvdimm, btt: fix a missed NVDIMM_IO_ATOMIC case in the write path libnvdimm, nfit: export an 'ecc_unit_size' sysfs attribute ext4: perform dax_device lookup at mount ext2: perform dax_device lookup at mount xfs: perform dax_device lookup at mount dax: introduce a fs_dax_get_by_bdev() helper libnvdimm, btt: check memory allocation failure libnvdimm, label: fix index block size calculation ...
2017-09-04libnvdimm, nfit: move the check on nd_reserved2 to the endpointMeng Xu1-0/+4
Delay the check of nd_reserved2 to the actual endpoint (acpi_nfit_ctl) that uses it, as a prevention of a potential double-fetch bug. While examining the kernel source code, I found a dangerous operation that could turn into a double-fetch situation (a race condition bug) where the same userspace memory region are fetched twice into kernel with sanity checks after the first fetch while missing checks after the second fetch. In the case of _IOC_NR(ioctl_cmd) == ND_CMD_CALL: 1. The first fetch happens in line 935 copy_from_user(&pkg, p, sizeof(pkg) 2. subsequently `pkg.nd_reserved2` is asserted to be all zeroes (line 984 to 986). 3. The second fetch happens in line 1022 copy_from_user(buf, p, buf_len) 4. Given that `p` can be fully controlled in userspace, an attacker can race condition to override the header part of `p`, say, `((struct nd_cmd_pkg *)p)->nd_reserved2` to arbitrary value (say nine 0xFFFFFFFF for `nd_reserved2`) after the first fetch but before the second fetch. The changed value will be copied to `buf`. 5. There is no checks on the second fetches until the use of it in line 1034: nd_cmd_clear_to_send(nvdimm_bus, nvdimm, cmd, buf) and line 1038: nd_desc->ndctl(nd_desc, nvdimm, cmd, buf, buf_len, &cmd_rc) which means that the assumed relation, `p->nd_reserved2` are all zeroes might not hold after the second fetch. And once the control goes to these functions we lose the context to assert the assumed relation. 6. Based on my manual analysis, `p->nd_reserved2` is not used in function `nd_cmd_clear_to_send` and potential implementations of `nd_desc->ndctl` so there is no working exploit against it right now. However, this could easily turns to an exploitable one if careless developers start to use `p->nd_reserved2` later and assume that they are all zeroes. Move the validation of the nd_reserved2 field to the ->ndctl() implementation where it has a stable buffer to evaluate. Signed-off-by: Meng Xu <mengxu.gatech@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-08-31libnvdimm, nd_blk: remove mmio_flush_range()Robin Murphy2-2/+2
mmio_flush_range() suffers from a lack of clearly-defined semantics, and is somewhat ambiguous to port to other architectures where the scope of the writeback implied by "flush" and ordering might matter, but MMIO would tend to imply non-cacheable anyway. Per the rationale in 67a3e8fe9015 ("nd_blk: change aperture mapping from WC to WB"), the only existing use is actually to invalidate clean cache lines for ARCH_MEMREMAP_PMEM type mappings *without* writeback. Since the recent cleanup of the pmem API, that also now happens to be the exact purpose of arch_invalidate_pmem(), which would be a far more well-defined tool for the job. Rather than risk potentially inconsistent implementations of mmio_flush_range() for the sake of one callsite, streamline things by removing it entirely and instead move the ARCH_MEMREMAP_PMEM related definitions up to the libnvdimm level, so they can be shared by NFIT as well. This allows NFIT to be enabled for arm64. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-08-31libnvdimm, nfit: export an 'ecc_unit_size' sysfs attributeDan Williams1-0/+11
When the nfit driver initializes it runs an ARS (Address Range Scrub) operation across every pmem range. Part of that process involves determining the ARS capabilities of a given address range. One of the capabilities that is reported is the 'Clear Uncorrectable Error Range Length Unit Size' (see: ACPI 6.2 section 9.20.7.4 Function Index 1 - Query ARS Capabilities). This property is of interest to userspace software as it indicates the boundary at which the NVDIMM may need to perform read-modify-write cycles to maintain ECC blocks. Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-08-29acpi/nfit: Fix COMPLETION_INITIALIZER_ONSTACK() abuseBoqun Feng1-1/+1
COMPLETION_INITIALIZER_ONSTACK() is supposed to be used as an initializer, in other words, it should only be used in assignment expressions or compound literals. So the usage in drivers/acpi/nfit/core.c: COMPLETION_INITIALIZER_ONSTACK(flush.cmp); ... is inappropriate. Besides, this usage could also break the build for another fix that reduces stack sizes caused by COMPLETION_INITIALIZER_ONSTACK(), because that fix changes COMPLETION_INITIALIZER_ONSTACK() from rvalue to lvalue, and usage as above will report the following error: drivers/acpi/nfit/core.c: In function 'acpi_nfit_flush_probe': include/linux/completion.h:77:3: error: value computed is not used [-Werror=unused-value] (*({ init_completion(&work); &work; })) This patch fixes this by replacing COMPLETION_INITIALIZER_ONSTACK() with init_completion() in acpi_nfit_flush_probe(), which does the same initialization without any other problems. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: walken@google.com Cc: willy@infradead.org Link: http://lkml.kernel.org/r/20170824142239.15178-1-boqun.feng@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-07nfit: cleanup long de-reference chains in acpi_nfit_init_interleave_setDan Williams1-12/+11
Use a local 'struct acpi_nfit_control_region *' variable to shorten the pointer chasing chains. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-08-04nfit, libnvdimm, region: export 'position' in mapping infoDan Williams1-0/+24
It is useful to be able to know the position of a DIMM in an interleave-set. Consider the case where the order of the DIMMs changes causing a namespace to be invalidated because the interleave-set cookie no longer matches. If the before and after state of each DIMM position is known this state debugged by the system owner. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-07-17acpi/nfit: Fix memory corruption/Unregister mce decoder on failurePrarit Bhargava1-1/+9
nfit_init() calls nfit_mce_register() on module load. When the module load fails the nfit mce decoder is not unregistered. The module's memory is freed leaving the decoder chain referencing junk. This will cause panics as future registrations will reference the free'd memory. Unregister the nfit mce decoder on module init failure. [v2]: register and then unregister mce handler to avoid losing mce events [v3]: also cleanup nfit workqueue Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error") Cc: <stable@vger.kernel.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: "Lee, Chun-Yi" <joeyli.kernel@gmail.com> Cc: Linda Knippers <linda.knippers@hpe.com> Cc: lszubowi@redhat.com Acked-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Prarit Bhargava <prarit@redhat.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-07-03Merge branch 'for-4.13/dax' into libnvdimm-for-nextDan Williams1-5/+10
2017-07-02acpi/nfit: Issue Start ARS to retrieve existing recordsToshi Kani3-5/+13
ACPI 6.2 defines in section 9.20.7.2 that the OSPM may call a Start ARS with Flags Bit [1] set upon receiving the 0x81 notification. Upon receiving the notification, the OSPM may decide to issue a Start ARS with Flags Bit [1] set to prepare for the retrieval of existing records and issue the Query ARS Status function to retrieve the records. Add support to call a Start ARS from acpi_nfit_uc_error_notify() with ND_ARS_RETURN_PREV_DATA set when HW_ERROR_SCRUB_ON is not set. Link: http://www.uefi.org/sites/default/files/resources/ACPI_6_2.pdf Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Linda Knippers <linda.knippers@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-07-01acpi, nfit: Show bus_dsm_mask in sysfsJerry Hoemann1-0/+12
Display bus_dsm_mask in sysfs as /sys/bus/nd/devices/ndbusX/nfit/dsm_mask. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-07-01libnvdimm, acpi, nfit: Add bus level dsm mask for pass thru.Jerry Hoemann1-0/+27
Add a bus level dsm_mask to nvdimm_bus_descriptor to allow the passthru calling mechanism to specify a different mask from the cmd_mask. Populate bus_dsm_mask and use it to filter dsm calls that user can make through the pass thru interface. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> [djbw: use command number constants instead of a magic mask value] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-07-01acpi, nfit: Enable DSM pass thru for root functions.Jerry Hoemann1-0/+1
Set ND_CMD_CALL in the cmd_mask to enable calling root functions via the pass thru mechanism. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-29acpi, nfit: constify *_attribute_groupArvind Yadav1-3/+3
File size before: text data bss dec hex filename 20792 1580 994 23366 5b46 drivers/acpi/nfit/core.o File size After adding 'const': text data bss dec hex filename 20968 1388 994 23350 5b36 drivers/acpi/nfit/core.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-27libnvdimm, nfit: enable support for volatile rangesDan Williams1-1/+8
Allow volatile nfit ranges to participate in all the same infrastructure provided for persistent memory regions. A resulting resulting namespace device will still be called "pmem", but the parent region type will be "nd_volatile". This is in preparation for disabling the dax ->flush() operation in the pmem driver when it is hosted on a volatile range. Cc: Jan Kara <jack@suse.cz> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-27x86, libnvdimm, pmem: remove global pmem apiDan Williams1-2/+1
Now that all callers of the pmem api have been converted to dax helpers that call back to the pmem driver, we can remove include/linux/pmem.h and asm/pmem.h. Cc: <x86@kernel.org> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Oliver O'Halloran <oohall@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-15acpi/nfit: Add support of NVDIMM memory error notification in ACPI 6.2Toshi Kani2-6/+23
ACPI 6.2 defines a new ACPI notification value to NVDIMM Root Device in Table 5-169. 0x81 Unconsumed Uncorrectable Memory Error Detected Used to pro-actively notify OSPM of uncorrectable memory errors detected (for example a memory scrubbing engine that continuously scans the NVDIMMs memory). This is an optional notification. Only locations that were mapped in to SPA by the platform will generate a notification. Add support of this notification value by initiating an ARS scan. This will find new error locations and add their badblocks information. Link: http://www.uefi.org/sites/default/files/resources/ACPI_6_2.pdf Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Linda Knippers <linda.knippers@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-15libnvdimm, label: populate 'isetcookie' for blk-aperture namespacesDan Williams1-6/+1
Starting with the v1.2 definition of namespace labels, the isetcookie field is populated and validated for blk-aperture namespaces. This adds some safety against inadvertent copying of namespace labels from one DIMM-device to another. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-15libnvdimm, label: populate the type_guid property for v1.2 namespacesDan Williams1-5/+10
The type_guid refers to the "Address Range Type GUID" for the region backing a namespace as defined the ACPI NFIT (NVDIMM Firmware Interface Table). This 'type' identifier specifies an access mechanism for the given namespace. This capability replaces the confusing usage of the 'NSLABEL_FLAG_LOCAL' flag to indicate a block-aperture-mode namespace. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.