aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/acpi/reboot.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2012-04-20Revert "ACPI: ignore FADT reset-reg-sup flag"Linus Torvalds1-1/+2
This reverts commit cf450136bfde77c7f95065c91bffded4aa7fa731. It breaks reboot on at least one Thinkpad T43, as reported by Jörg Otte: "On reboot it shuts down as normal. The last lines displayed are: >Unmounting temporary filesystems.. [OK] >Deactivating swap... [OK] >Unmounting local filesystems... [OK] >Will now restart > Restarting system Then I hear it accessing the cd-drive, but then it's being stuck." Jörg bisected the regression to this commit. That commit fixes another machine (see https://bugzilla.kernel.org/show_bug.cgi?id=11533 for details) that has a BIOS bug and doesn't support ACPI reset. However, at least one of those other reporters no longer even has the machine in question, and had a different workaround to begin with. Besides, it clearly was a buggy BIOS. Let's not break the correct case to fix that case. Reported-and-bisected-by: Jörg Otte <jrg.otte@googlemail.com> Cc: linux-acpi@vger.kernel.org Cc: Len Brown <lenb@kernel.org> Cc: Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21ACPI: ignore FADT reset-reg-sup flagLen Brown1-2/+1
we check that the address is non-zero later anyway. https://bugzilla.kernel.org/show_bug.cgi?id=11533 Signed-off-by: Len Brown <len.brown@intel.com>
2011-03-22ACPI: Make sure the FADT is at least rev 2 before using the reset registerMatthew Garrett1-0/+5
The reset register was only introduced with version 2 of the FADT, so we should check that the FADT revision before trusting its contents. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-03-22ACPI: Bug compatibility for Windows on the ACPI reboot vectorMatthew Garrett1-5/+4
Windows ignores the bit_offset and bit_width, despite the spec requiring that they be validated. Drop the checks so that we match this behaviour. Windows also goes straight for the keyboard controller if the ACPI reboot fails, so we shouldn't sleep if we're still alive. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: reboot.c: use new acpi_reset interfaceLin Ming1-1/+1
Use new acpi_reset interface to write to reset register Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPICA: New: acpi_read and acpi_write public interfacesBob Moore1-1/+1
Changed the acpi_hw_low_level_read and acpi_hw_low_level_write functions to the public acpi_read and acpi_write to allow direct access to ACPI registers. Removed the "width" parameter since the width can be obtained from the input GAS structure. Updated the FADT initialization to setup the GAS structures with the proper widths. Some widths are still hardcoded because many FADTs have incorrect register lengths. Signed-off-by: Bob Moore <robert.moore@intel.com Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-06Revert "ACPI: Ingore the RESET_REG_SUP bit when using ACPI reset mechanism"Len Brown1-22/+3
This reverts commit 8fd145917fb62368a9b80db59562c20576238f5a. http://bugzilla.kernel.org/show_bug.cgi?id=11942 Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-18ACPI: Ingore the RESET_REG_SUP bit when using ACPI reset mechanismZhao Yakui1-3/+22
According to ACPI 3.0, FADT.flags.RESET_REG_SUP indicates whether the ACPI reboot mechanism is supported. However, some boxes have this bit clear, have a valid ACPI_RESET_REG & RESET_VALUE, and ACPI reboot is the only mechanism that works for them after S3. This suggests that other operating systems may not be checking the RESET_REG_SUP bit, and are using other means to decide whether to use the ACPI reboot mechanism or not. Here we stop checking RESET_REG_SUP. Instead, When acpi reboot is requested, only the reset_register is checked. If the following conditions are met, it indicates that the reset register is supported. a. reset_register is not zero b. the access width is eight c. the bit_offset is zero http://bugzilla.kernel.org/show_bug.cgi?id=7299 http://bugzilla.kernel.org/show_bug.cgi?id=1148 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16Add the ability to reset the machine using the RESET_REG in ACPI's FADT table.Aaron Durbin1-0/+50
Signed-off-by: Aaron Durbin <adurbin@google.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>