| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
On some Bay Trail systems the GPU ACPI fwnode has power-resources which
point to the PMIC, which is connected over the LPSS I2C5 controller.
This one was quite nasty to debug, unlike on CHT where the same problem
leads to errors like these:
i2c_designware 808622C1:06: controller timed out
ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion]
ACPI Error: Method parse/execution failed \_SB.P18W._ON, AE_ERROR
video LNXVIDEO:00: Failed to change power state to D0
On BYT the read-modify-write done by drivers/acpi/pmic/intel_pmic_xpower.c
on the AXP288 PMIC register to change the power-resource state *seems* to
succeed.
But in reality, because the I2C controller has not been resumed yet, the
read silently fails and returns the wrong value, where as the write does
succeed, writing back the wrong value for all the other power-resources
in the same register, turning off a bunch of them. Which of course does
not end well.
This commit adds a RPM consumer link from the GPU (which has a LNXVIDEO
HID) to the BYT LPSS I2C5 controller, so that the I2C controller gets
resumed before the GPU is resumed and thus before we try to change the
power-resource.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On some Cherry Trail systems the GPU ACPI fwnode has power-resources which
point to the PMIC, which is connected over the LPSS I2C7 controller.
Due to probe ordering currently we resume the GPU and thus try to access
the ACPI power-resources before the I2C controller has been resumed. This
leads to the following errors:
i2c_designware 808622C1:06: controller timed out
ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion]
ACPI Error: Method parse/execution failed \_SB.P18W._ON, AE_ERROR
video LNXVIDEO:00: Failed to change power state to D0
This commit adds a RPM consumer link from the GPU (which has a LNXVIDEO
HID) to the CHT LPSS I2C7 controller, so that the I2C controller gets
resumed before the GPU is resumed.
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On some Cherry Trail systems the GPU ACPI fwnode has power-resources which
point to the PMIC, which is connected over one of the LPSS I2C controllers.
To get the suspend/resume ordering correct for this we need to be able to
add device-links between the GPU and the I2c controller. The GPU is a PCI
device, so this requires acpi_lpss_find_device() to also work on PCI devs.
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Make hid_uid_match helper accept a NULL uid argument, so that we can also
check for matches against devices with are not expected to have a uid such
as the LNXVIDEO device.
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The hid_uid_match() helper is only used to check if a given acpi_device
matches a certain hid + uid combination. Make the first argument the
acpi_device to check to make this more clear.
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Hygon Dhyana CPU has NONSTOP TSC feature, so enable the ACPI driver
support to it.
Signed-off-by: Pu Wen <puwen@hygon.cn>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: rjw@rjwysocki.net
Cc: tglx@linutronix.de
Cc: mingo@redhat.com
Cc: hpa@zytor.com
Cc: x86@kernel.org
Cc: thomas.lendacky@amd.com
Cc: lenb@kernel.org
Cc: rafael@kernel.org
Cc: linux-acpi@vger.kernel.org
Link: https://lkml.kernel.org/r/cce6ee26f4e2ebbab493433264d89d7cea661284.1537533369.git.puwen@hygon.cn
|
|
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Zhao Yakui <yakui.zhao@intel.com>
Cc: Lv Zheng <lv.zheng@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The PCI Firmware Spec, r3.2, sec 4.5.1, says:
For a host bridge device that originates a PCI Express hierarchy, the
_OSC interface defined in this section is required. For a host bridge
device that originates a PCI/PCI-X bus hierarchy, inclusion of an _OSC
object is optional.
Allow PCI host bridges to bail out silently if _OSC is not found.
Reported-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sinan Kaya <okaya@kernel.org>
[bhelgaas: cite PCI Firmware spec, the authoritative source]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
If _OSC execution fails today for platforms without an _OSC entry, code is
printing a misleading message saying disabling ASPM as follows:
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
We need to ensure that platform supports ASPM to begin with.
Reported-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
lpss_iosf_enter_d3_state() checks if all hw-blocks using the DMA
controllers are in d3 before powering down the DMA controllers.
But on devices, where the I2C bus connected to the PMIC is shared by
the PUNIT, the controller for that bus will never reach d3 since it has
an effectively empty _PS3 method. Instead it appears to automatically
power-down during S0i3 and we never see it as being in d3.
This causes the DMA controllers to never be powered-down on these devices,
causing them to never reach S0i3. This commit uses the ACPI _SEM method
to detect if an I2C bus is shared with the PUNIT and if it is, it removes
it from the mask of devices which lpss_iosf_enter_d3_state() checks for.
This fixes these devices never reaching any S0ix states.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Reduce size of duplicated comments by switching to use SPDX identifier.
No functional change.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Sort headers alphabetically for better maintenance.
No functional change.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Switch to bitmap_zalloc() to show clearly what we are allocating.
Besides that it returns pointer of bitmap type instead of opaque void *.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Bay and Cherry Trail DSTDs represent a different set of devices depending
on which OS the device think it is booting. One set of decices for Windows
and another set of devices for Android which targets the Android-x86 Linux
kernel fork (which e.g. used to have its own display driver instead of
using the i915 driver).
Which set of devices we are actually going to get is out of our control,
this is controlled by the ACPI OSID variable, which gets either set through
an EFI setup option, or sometimes is autodetected. So we need to support
both.
This commit adds support for the 80862286 and 808622C0 ACPI HIDs which we
get for the first resp. second DMA controller on Cherry Trail devices when
OSID is set to Android.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There would be useful to have in future the similar API in platform
core, as we have, for example, for PCI subsystem, to check if device
belongs to it.
Thus, split out conditional to a macro dev_is_platform() for wide use.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
debugfs_remove() has taken null pointer into account. So it is safe
to remove the check before debugfs_remove().
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This goes through a lot of hooks just to call arch_teardown_dma_ops.
Replace it with a direct call instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
|
|
Merge ACPI core fix to avoid calling dmi_check_system() on non-x86.
* acpi-bus:
ACPI / bus: Only call dmi_check_system() on X86
|
|
Commit 12864ff8545f (ACPI / LPSS: Avoid PM quirks on suspend and resume
from hibernation) bypasses lpss quirks for S3 and S4, by setting a flag
for S3/S4 in acpi_lpss_suspend(), and check that flag in
acpi_lpss_resume().
But this overlooks the boot case where acpi_lpss_resume() may get called
without a corresponding acpi_lpss_suspend() having been called.
Thus force setting the flag during boot.
Fixes: 12864ff8545f (ACPI / LPSS: Avoid PM quirks on suspend and resume from hibernation)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200989
Reported-and-tested-by: William Lieurance <william.lieurance@namikoda.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Cc: 4.15+ <stable@vger.kernel.org> # 4.15+: 12864ff8545f (ACPI / LPSS: Avoid ...)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Calling dmi_check_system() early only works on X86. Other
architectures initialize the DMI subsystem later so it's not
ready yet when ACPI itself gets initialized.
In the best case it results in a useless call to a function which
will do nothing. But depending on the dmi implementation, it could
also result in warnings. Best is to not call the function when it
can't work and isn't needed.
Additionally, if anyone ever needs to add non-x86 quirks, it would
surprisingly not work, so document the limitation to avoid confusion.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: cce4f632db20 (ACPI: fix early DSDT dmi check warnings on ia64)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull libnvdimm updates from Dave Jiang:
"Collection of misc libnvdimm patches for 4.19 submission:
- Adding support to read locked nvdimm capacity.
- Change test code to make DSM failure code injection an override.
- Add support for calculate maximum contiguous area for namespace.
- Add support for queueing a short ARS when there is on going ARS for
nvdimm.
- Allow NULL to be passed in to ->direct_access() for kaddr and pfn
params.
- Improve smart injection support for nvdimm emulation testing.
- Fix test code that supports for emulating controller temperature.
- Fix hang on error before devm_memremap_pages()
- Fix a bug that causes user memory corruption when data returned to
user for ars_status.
- Maintainer updates for Ross Zwisler emails and adding Jan Kara to
fsdax"
* tag 'libnvdimm-for-4.19_misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm: fix ars_status output length calculation
device-dax: avoid hang on error before devm_memremap_pages()
tools/testing/nvdimm: improve emulation of smart injection
filesystem-dax: Do not request kaddr and pfn when not required
md/dm-writecache: Don't request pointer dummy_addr when not required
dax/super: Do not request a pointer kaddr when not required
tools/testing/nvdimm: kaddr and pfn can be NULL to ->direct_access()
s390, dcssblk: kaddr and pfn can be NULL to ->direct_access()
libnvdimm, pmem: kaddr and pfn can be NULL to ->direct_access()
acpi/nfit: queue issuing of ars when an uc error notification comes in
libnvdimm: Export max available extent
libnvdimm: Use max contiguous area for namespace size
MAINTAINERS: Add Jan Kara for filesystem DAX
MAINTAINERS: update Ross Zwisler's email address
tools/testing/nvdimm: Fix support for emulating controller temperature
tools/testing/nvdimm: Make DSM failure code injection an override
acpi, nfit: Prefer _DSM over _LSR for namespace label reads
libnvdimm: Introduce locked DIMM capacity support
|
|
Pull ACPI Kconfig fix from Rafael Wysocki:
"Fix recent menuconfig breakage causing it to present ACPI-specific
options incorrectly (Arnd Bergmann)"
* tag 'acpi-4.19-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: fix menuconfig presentation of ACPI submenu
|
|
Pull xen fixes and cleanups from Juergen Gross:
"Some cleanups, some minor fixes and a fix for a bug introduced in this
merge window hitting 32-bit PV guests"
* tag 'for-linus-4.19b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: enable early use of set_fixmap in 32-bit Xen PV guest
xen: remove unused hypercall functions
x86/xen: remove unused function xen_auto_xlated_memory_setup()
xen/ACPI: don't upload Px/Cx data for disabled processors
x86/Xen: further refine add_preferred_console() invocations
xen/mcelog: eliminate redundant setting of interface version
x86/Xen: mark xen_setup_gdt() __init
|
|
My fix for a recursive Kconfig dependency caused another issue where the
ACPI specific options end up in the top-level menu in 'menuconfig'. This
was an unintended side-effect of having a silent option between
'menuconfig ACPI' and 'if ACPI'.
Moving the ARCH_SUPPORTS_ACPI symbol ahead of the ACPI menu solves that
problem and restores the previous presentation.
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: 2c870e61132c (arm64: fix ACPI dependencies)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull more ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to the most recent upstream
revision (which includes a regression fix and other improvements),
make ACPICA clear the status of all ACPI events when entering sleep
states (to restore the previous behavior) and update the ACPI
operation region driver for the CrystalCove PMIC.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20180810
including:
* Fix for AML parser regression causing it to mishandle opcodes
that open a scope upon parse failures (Erik Schmauss)
* Fix for a reference counting issue on large systems (Erik
Schmauss)
* Fix to discard values coming from register reads that have
failed (Erik Schmauss)
* Two acpiexec fixes (Bob Moore, Erik Schmauss)
* Debugger cleanup (Bob Moore)
* Cleanup of duplicate table error message (Bob Moore)
* Cleanup of hex detection in the utilities (Erik Schmauss)
- Make ACPICA clear the status of all ACPI events when entering sleep
states again to avoid functional regressions (Rafael Wysocki)
- Update the ACPI operation region driver for the CrystalCove PMIC to
cover all of the known operation region fields (Hans de Goede)"
* tag 'acpi-4.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / PMIC: CrystalCove: Extend PMOP support to support all possible fields
ACPICA: Clear status of all events when entering sleep states
ACPICA: Update version to 20180810
ACPICA: acpiexec: fix a small memory leak regression
ACPICA: Reference Counts: increase max to 0x4000 for large servers
ACPICA: Reference count: add additional debugging details
ACPICA: acpi_exec: fixing -fi option
ACPICA: Debugger: Cleanup interface to the AML disassembler
ACPICA: AML Parser: skip opcodes that open a scope upon parse failure
ACPICA: Utilities: split hex detection into smaller functions
ACPICA: Update an error message for a duplicate table
ACPICA: ACPICA: add status check for acpi_hw_read before assigning return value
ACPICA: AML Parser: ignore all exceptions resulting from incorrect AML during table load
|
|
Merge a CrystalCove PMIC driver update.
* acpi-pmic:
ACPI / PMIC: CrystalCove: Extend PMOP support to support all possible fields
|
|
This is unnecessary and triggers a warning in the hypervisor.
Often systems have more processor entries in their ACPI tables than are
actually installed/active. The ACPI_STA_DEVICE_PRESENT bit cannot be
reliably used, but the ACPI_MADT_ENABLED bit can. In order to not
introduce new functions in the main ACPI processor driver code, simply
use acpi_get_phys_id(), which does more than we need, but which checks
the MADT enabled bit in the process. Any CPU for which we can't
determine the APIC ID is unlikely to work properly anyway, so the extra
checks done by acpi_get_phys_id() should do no harm.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Pull arm64 updates from Will Deacon:
"A bunch of good stuff in here. Worth noting is that we've pulled in
the x86/mm branch from -tip so that we can make use of the core
ioremap changes which allow us to put down huge mappings in the
vmalloc area without screwing up the TLB. Much of the positive
diffstat is because of the rseq selftest for arm64.
Summary:
- Wire up support for qspinlock, replacing our trusty ticket lock
code
- Add an IPI to flush_icache_range() to ensure that stale
instructions fetched into the pipeline are discarded along with the
I-cache lines
- Support for the GCC "stackleak" plugin
- Support for restartable sequences, plus an arm64 port for the
selftest
- Kexec/kdump support on systems booting with ACPI
- Rewrite of our syscall entry code in C, which allows us to zero the
GPRs on entry from userspace
- Support for chained PMU counters, allowing 64-bit event counters to
be constructed on current CPUs
- Ensure scheduler topology information is kept up-to-date with CPU
hotplug events
- Re-enable support for huge vmalloc/IO mappings now that the core
code has the correct hooks to use break-before-make sequences
- Miscellaneous, non-critical fixes and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits)
arm64: alternative: Use true and false for boolean values
arm64: kexec: Add comment to explain use of __flush_icache_range()
arm64: sdei: Mark sdei stack helper functions as static
arm64, kaslr: export offset in VMCOREINFO ELF notes
arm64: perf: Add cap_user_time aarch64
efi/libstub: Only disable stackleak plugin for arm64
arm64: drop unused kernel_neon_begin_partial() macro
arm64: kexec: machine_kexec should call __flush_icache_range
arm64: svc: Ensure hardirq tracing is updated before return
arm64: mm: Export __sync_icache_dcache() for xen-privcmd
drivers/perf: arm-ccn: Use devm_ioremap_resource() to map memory
arm64: Add support for STACKLEAK gcc plugin
arm64: Add stack information to on_accessible_stack
drivers/perf: hisi: update the sccl_id/ccl_id when MT is supported
arm64: fix ACPI dependencies
rseq/selftests: Add support for arm64
arm64: acpi: fix alignment fault in accessing ACPI
efi/arm: map UEFI memory map even w/o runtime services enabled
efi/arm: preserve early mapping of UEFI memory map longer for BGRT
drivers: acpi: add dependency of EFI for arm64
...
|
|
Prior to this commit the CRC PMOP handler only supported the X285 and V18X
PMOP fields. Leading to errors like these on device using the VBUS field:
[ 765.766489] ACPI Error: AE_BAD_PARAMETER, Returned by Handler for [UserDefinedRegion] (20180531/evregion-266)
[ 765.766526] ACPI Error: Method parse/execution failed \_SB.I2C1.BATC._BST, AE_BAD_PARAMETER (20180531/psparse-516)
[ 765.766586] ACPI Error: AE_BAD_PARAMETER, Evaluating _BST (20180531/battery-577)
This commit adds support for all known fields to the CRC PMOP OpRegion
handler, the name and register info in this commit comes from:
https://github.com/01org/ProductionKernelQuilts/blob/master/uefi/cht-m1stable/patches/0002-ACPI-Adding-support-for-WC-and-CRC-opregion.patch
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit fa85015c0d95 (ACPICA: Clear status of all events when entering
S5) made the sleep state entry code in ACPICA clear the status of all
ACPI events when entering S5 to fix a functional regression reported
against commit 18996f2db918 (ACPICA: Events: Stop unconditionally
clearing ACPI IRQs during suspend/resume). However, it is reported
now that the regression also affects system states other than S5 on
some systems and causes them to wake up from sleep prematurely.
For this reason, make the code in question clear the status of all
ACPI events when entering all sleep states (in addition to S5) to
avoid the premature wakeups (this may cause some wakeup events to
be missed in theory, but the likelihood of that is small and the
change here simply restores the previous behavior of the code).
Fixes: 18996f2db918 (ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume)
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+: fa85015c0d95 ACPICA: Clear status ...
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Eliminates warnings only seen when acpiexec exits.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Make reference counting diagnostics provide more information on
what has happened.
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Field elements listed in the init file used to be initialized after
the table load and before executing module-level code blocks. The
recent changes in module-level code mean that the table load becomes
a method execution. If fields are used within module-level code and
we are executing with -fi option, then these values are populated
after the table has finished loading. This commit changes the
initialization of objects listed in the init file so that field unit
values are populated during the table load.
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If the disassembler is configured out (such as when the debugger
is part of a kernel), these debugger commands are disabled:
List
Disassemble
Further, the Debug (single-step) command is simplified because
each line of code cannot be disassembled.
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This change skips the entire length of opcodes that open a scope
(Device, Scope, Processor, etc) if the creation of the op fails. The
failure could be caused by various errors including AE_ALREADY_EXISTS
and AE_NOT_FOUND.
Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
acpi_ut_implicit_strtoul64() called acpi_ut_detect_hex_prefix() and
ignored the return value. Instead, use acpi_ut_remove_hex_prefix().
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In this case, the exception AE_ALREADY_EXISTS is more
appropriate.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The value coming from acpi_hw_read() should not be used if it
returns an error code, so check the status returned by it before
using that value in two places in acpi_hw_register_read().
Reported-by: Mark Gross <mark.gross@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Macros to classify different AML exception codes have been added in
order to ignore the exceptions,
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
[ rjw: Fix damaged white space ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull ACPI updates from Rafael Wysocki:
"These revert two ACPICA commits that are not needed any more, rework
the property graphs support in ACPI to be more aligned with the
analogous DT code, add some new quirks and remove one that isn't
needed any more, add a special platform driver to enumerate multiple
I2C devices hooked up to the same device object in the ACPI tables and
update the battery and button drivers.
Specifics:
- Revert two ACPICA commits that are not needed any more (Erik
Schmauss).
- Rework property graph support in the ACPI device properties
framework to make it behave more like the analogous DT code and
update the documentation of it (Sakari Ailus).
- Change the default ACPI device status after initialization to
ACPI_STA_DEFAULT instead of 0 (Hans de Goede).
- Add a special platform driver for enumerating multiple I2C devices
hooked up to the same object in the ACPI tables (Hans de Goede).
- Fix the ACPI battery driver to avoid reporting full capacity on
systems without support for that and clean it up (Hans de Goede,
Dmitry Rozhkov, Lucas Rangit Magasweran).
- Add two system wakeup quirks to the ACPI EC driver (Aaron Ma, Mika
Westerberg).
- Add the touchscreen on Dell Venue Pro 7139 to the list of "always
present" devices to make it work (Tristian Celestin).
- Revert a special tables handling quirk for Dell XPS 9570 and
Precision M5530 which is not needed any more (Kai Heng Feng).
- Add support for a new OEM _OSI string to allow system vendors to
work around issues with NVidia HDMI audio (Alex Hung).
- Prevent the ACPI button driver from reporting excessive system
wakeup events and clean it up (Ravi Chandra Sadineni, Randy
Dunlap).
- Clean up two minor code style issues in the ACPI core and GHES
handling on ARM64 (Dongjiu Geng, John Garry, Tom Todd)"
* tag 'acpi-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits)
platform/x86: Add ACPI i2c-multi-instantiate pseudo driver
ACPI / x86: utils: Remove status workaround from acpi_device_always_present()
ACPI / scan: Create platform device for fwnodes with multiple i2c devices
ACPI / scan: Initialize status to ACPI_STA_DEFAULT
ACPI / EC: Add another entry for Thinkpad X1 Carbon 6th
ACPI: bus: Fix a pointer coding style issue
arm64 / ACPI: clean the additional checks before calling ghes_notify_sea()
ACPI / scan: Add static attribute to indirect_io_hosts[]
ACPI / battery: Do not export energy_full[_design] on devices without full_charge_capacity
ACPI / EC: Use ec_no_wakeup on ThinkPad X1 Yoga 3rd
ACPI / battery: get rid of negations in conditions
ACPI / battery: use specialized print macros
ACPI / battery: reorder headers alphabetically
ACPI / battery: drop inclusion of init.h
ACPI: battery: remove redundant old_present check on insertion
ACPI: property: graph: Update graph documentation to use generic references
ACPI: property: graph: Improve graph documentation for port/ep numbering
ACPI: property: graph: Fix graph documentation
ACPI: property: Update documentation for hierarchical data extension 1.1
ACPI: property: Document key numbering for hierarchical data extension refs
...
|
|
Pull power management updates from Rafael Wysocki:
"These add a new framework for CPU idle time injection, to be used by
all of the idle injection code in the kernel in the future, fix some
issues and add a number of relatively small extensions in multiple
places.
Specifics:
- Add a new framework for CPU idle time injection (Daniel Lezcano).
- Add AVS support to the armada-37xx cpufreq driver (Gregory
CLEMENT).
- Add support for current CPU frequency reporting to the ACPI CPPC
cpufreq driver (George Cherian).
- Rework the cooling device registration in the imx6q/thermal driver
(Bastian Stender).
- Make the pcc-cpufreq driver refuse to work with dynamic scaling
governors on systems with many CPUs to avoid scalability issues
with it (Rafael Wysocki).
- Fix the intel_pstate driver to report different maximum CPU
frequencies on systems where they really are different and to
ignore the turbo active ratio if hardware-managend P-states (HWP)
are in use; make it use the match_string() helper (Xie Yisheng,
Srinivas Pandruvada).
- Fix a minor deferred probe issue in the qcom-kryo cpufreq driver
(Niklas Cassel).
- Add a tracepoint for the tracking of frequency limits changes (from
Andriod) to the cpufreq core (Ruchi Kandoi).
- Fix a circular lock dependency between CPU hotplug and sysfs
locking in the cpufreq core reported by lockdep (Waiman Long).
- Avoid excessive error reports on driver registration failures in
the ARM cpuidle driver (Sudeep Holla).
- Add a new device links flag to the driver core to make links go
away automatically on supplier driver removal (Vivek Gautam).
- Eliminate potential race condition between system-wide power
management transitions and system shutdown (Pingfan Liu).
- Add a quirk to save NVS memory on system suspend for the ASUS 1025C
laptop (Willy Tarreau).
- Make more systems use suspend-to-idle (instead of ACPI S3) by
default (Tristian Celestin).
- Get rid of stack VLA usage in the low-level hibernation code on
64-bit x86 (Kees Cook).
- Fix error handling in the hibernation core and mark an expected
fall-through switch in it (Chengguang Xu, Gustavo Silva).
- Extend the generic power domains (genpd) framework to support
attaching a device to a power domain by name (Ulf Hansson).
- Fix device reference counting and user limits initialization in the
devfreq core (Arvind Yadav, Matthias Kaehlcke).
- Fix a few issues in the rk3399_dmc devfreq driver and improve its
documentation (Enric Balletbo i Serra, Lin Huang, Nick Milner).
- Drop a redundant error message from the exynos-ppmu devfreq driver
(Markus Elfring)"
* tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits)
PM / reboot: Eliminate race between reboot and suspend
PM / hibernate: Mark expected switch fall-through
cpufreq: intel_pstate: Ignore turbo active ratio in HWP
cpufreq: Fix a circular lock dependency problem
cpu/hotplug: Add a cpus_read_trylock() function
x86/power/hibernate_64: Remove VLA usage
cpufreq: trace frequency limits change
cpufreq: intel_pstate: Show different max frequency with turbo 3 and HWP
cpufreq: pcc-cpufreq: Disable dynamic scaling on many-CPU systems
cpufreq: qcom-kryo: Silently error out on EPROBE_DEFER
cpufreq / CPPC: Add cpuinfo_cur_freq support for CPPC
cpufreq: armada-37xx: Add AVS support
dt-bindings: marvell: Add documentation for the Armada 3700 AVS binding
PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload.
PM / devfreq: Init user limits from OPP limits, not viceversa
PM / devfreq: rk3399_dmc: fix spelling mistakes.
PM / devfreq: rk3399_dmc: do not print error when get supply and clk defer.
dt-bindings: devfreq: rk3399_dmc: move interrupts to be optional.
PM / devfreq: rk3399_dmc: remove wait for dcf irq event.
dt-bindings: clock: add rk3399 DDR3 standard speed bins.
...
|
|
Pull dma-mapping updates from Christoph Hellwig:
- a series from Robin to fix bus imposed dma limits by adding a
separate mask for them to struct device instead of trying to squeeze
a second meaning out of the existing dma mask as we did before.
This has ACKs from the various other subsystems touched
- a small swiotlb cleanup from Kees (acked by Konrad)
- conversion of nios2 and sh to the new generic dma-noncoherent code.
Various other architecture conversions will come through the
architectures maintainers trees.
* tag 'dma-mapping-4.19' of git://git.infradead.org/users/hch/dma-mapping:
sh: use generic dma_noncoherent_ops
sh: split arch/sh/mm/consistent.c
sh: use dma_direct_ops for the CONFIG_DMA_COHERENT case
sh: introduce a sh_cacheop_vaddr helper
sh: simplify get_arch_dma_ops
OF: Don't set default coherent DMA mask
ACPI/IORT: Don't set default coherent DMA mask
iommu/dma: Respect bus DMA limit for IOVAs
of/device: Set bus DMA mask as appropriate
ACPI/IORT: Set bus DMA mask as appropriate
dma-mapping: Generalise dma_32bit_limit flag
ACPI/IORT: Support address size limit for root complexes
of/platform: Initialise default DMA masks
nios2: use generic dma_noncoherent_ops
swiotlb: clean up reporting
dma-mapping: relax warning for per-device areas
|
|
Merge updates of the ACPI battery and button drivers and support for
a new OEM _OSI string for 4.19.
* acpi-button:
ACPI / button: fix defined but not used warning
ACPI / button: increment wakeup count only when notified
* acpi-battery:
ACPI / battery: Do not export energy_full[_design] on devices without full_charge_capacity
ACPI / battery: get rid of negations in conditions
ACPI / battery: use specialized print macros
ACPI / battery: reorder headers alphabetically
ACPI / battery: drop inclusion of init.h
ACPI: battery: remove redundant old_present check on insertion
* acpi-osi:
ACPI / OSI: Add OEM _OSI string to enable NVidia HDMI audio
|
|
Merge ACPI x86-specific changes, core updates, EC driver updates and
APEI support updates for 4.19.
These add a special platform driver for handling multiple I2C devices
hooked up to the same device object in the ACPI tables, add some new
quirks and remove one that is not needed any more.
* acpi-x86:
platform/x86: Add ACPI i2c-multi-instantiate pseudo driver
ACPI / x86: utils: Remove status workaround from acpi_device_always_present()
ACPI / x86: enable touchscreen on Dell Venue Pro 7139
* acpi-bus:
ACPI: bus: Fix a pointer coding style issue
Revert "ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530"
* acpi-ec:
ACPI / EC: Add another entry for Thinkpad X1 Carbon 6th
ACPI / EC: Use ec_no_wakeup on ThinkPad X1 Yoga 3rd
* acpi-apei:
arm64 / ACPI: clean the additional checks before calling ghes_notify_sea()
|
|
Merge ACPICA changes and updates of the ACPI device properties
framework for 4.19.
These revert two ACPICA commits that are not needed any more and
modify the properties graph support in ACPI to be more in-line with
the analogous DT code.
* acpica:
ACPICA: Update version to 20180629
ACPICA: Revert "iASL compiler: allow compilation of externals with paths that refer to existing names"
ACPICA: Revert "iASL: change processing of external op namespace nodes for correctness"
* acpi-property:
ACPI: property: graph: Update graph documentation to use generic references
ACPI: property: graph: Improve graph documentation for port/ep numbering
ACPI: property: graph: Fix graph documentation
ACPI: property: Update documentation for hierarchical data extension 1.1
ACPI: property: Document key numbering for hierarchical data extension refs
ACPI: property: Use data node name and reg property for graphs
ACPI: property: Allow direct graph endpoint references
ACPI: property: Make the ACPI graph API private
ACPI: property: Document hierarchical data extension references
ACPI: property: Allow making references to non-device nodes
ACPI: Convert ACPI reference args to generic fwnode reference args
|
|
Merge changes in the PM core, system-wide PM infrastructure, generic
power domains (genpd) framework, ACPI PM infrastructure and cpuidle
for 4.19.
* pm-core:
driver core: Add flag to autoremove device link on supplier unbind
driver core: Rename flag AUTOREMOVE to AUTOREMOVE_CONSUMER
* pm-domains:
PM / Domains: Introduce dev_pm_domain_attach_by_name()
PM / Domains: Introduce option to attach a device by name to genpd
PM / Domains: dt: Add a power-domain-names property
* pm-sleep:
PM / reboot: Eliminate race between reboot and suspend
PM / hibernate: Mark expected switch fall-through
x86/power/hibernate_64: Remove VLA usage
PM / hibernate: cast PAGE_SIZE to int when comparing with error code
* acpi-pm:
ACPI / PM: save NVS memory for ASUS 1025C laptop
ACPI / PM: Default to s2idle in all machines supporting LP S0
* pm-cpuidle:
ARM: cpuidle: silence error on driver registration failure
|
|
Now that we init the status field to ACPI_STA_DEFAULT rather then to 0,
the workaround for acpi_match_device_ids() always returning -ENOENT when
status is 0 is no longer needed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
Some devices have multiple I2cSerialBus resources and for things to work
an i2c-client must be instantiated for each, each with its own
i2c_device_id.
Normally we only instantiate an i2c-client for the first resource, using
the ACPI HID as id.
This commit adds a list of HIDs of devices, which need multiple i2c-clients
instantiated from a single fwnode, to acpi_device_enumeration_by_parent and
makes acpi_device_enumeration_by_parent return false for these devices so
that a platform device will be instantiated.
This allows the drivers/platform/x86/i2c-multi-instantiate.c driver, which
knows which i2c_device_id to use for each resource, to bind to the fwnode
and initiate an i2c-client for each resource.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since commit 63347db0affa "ACPI / scan: Use acpi_bus_get_status() to
initialize ACPI_TYPE_DEVICE devs" the status field of normal acpi_devices
gets set to 0 by acpi_bus_type_and_status() and filled with its actual
value later when acpi_add_single_object() calls acpi_bus_get_status().
This means that any acpi_match_device_ids() calls in between will always
fail with -ENOENT.
We already have a workaround for this, which temporary forces status to
ACPI_STA_DEFAULT in drivers/acpi/x86/utils.c: acpi_device_always_present()
and the next commit in this series adds another acpi_match_device_ids()
call between status being initialized as 0 and the acpi_bus_get_status()
call.
Rather then adding another workaround, this commit makes
acpi_bus_type_and_status() initialize status to ACPI_STA_DEFAULT, this is
safe to do as the only code looking at status between the initialization
and the acpi_bus_get_status() call is those acpi_match_device_ids() calls.
Note this does mean that we need to (re)set status to 0 in case the
acpi_bus_get_status() call fails.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
Hans de Goede
Pu Wen
Corey Minyard
Sinan Kaya
Andy Shevchenko
zhong jiang
Christoph Hellwig
Rafael J. Wysocki
Zhang Rui
Jean Delvare
Linus Torvalds
Arnd Bergmann
Jan Beulich
Bob Moore
Erik Schmauss