| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Change the calling interface for gotoxy from supplying the x and y
coordinates in the charlcd struct to explicitly supplying x and y in
the function arguments. This is more intuitive and allows for moving
the cursor to positions independent from the position saved in the
charlcd struct.
Reviewed-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
These are the last bits left in charlcd.c that are device specific and
they are removed now.
In detail this is:
* bwidth, which is the width of the display buffer per line. This is
replaced by width of the display.
* hwidth, which is the size of the display buffer as a whole. This is
replaced by looping all chars of a line by all lines.
* the hd44780_common header include can go away.
Reviewed-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
We remove the hd44780_clear_fast (display) clear implementation. With
the new timeout the normal clear_display is reasonably fast. So there is
no need for a clear_fast anymore.
Link: https://lore.kernel.org/lkml/20200922092121.GG16421@1wt.eu/
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Digging in the hd44780 datasheet revealed that the timeout needed after
clearing the whole display is only 1,64ms not 15ms. So we can reduce
that timeout.
Link: https://lore.kernel.org/lkml/20200922092121.GG16421@1wt.eu/
Link: https://www.crystalfontz.com/controllers/Hitachi/HD44780/433/
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This moves the call to charlcd_backlight from the end of the switch
into the actual case statement that originates the change of the
backlight. This is more consistent to what is now found in this switch.
Reviewed-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Take the code to redefine characters out of charlcd and move it to
hd44780_common, as this is hd44780 specific.
There is now a function hd44780_common_redefine_char that drivers use
and charlcd calls it through its ops function pointer.
Reviewed-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This cleans up now unnecessary hd44780 specific code from charlcd. We
obsoleted this with the last patch. So another chunk of hd44780 specific
code can be dropped from charlcd.
Reviewed-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This implements various hd44780_common_ functions for hd44780 compatible
display drivers to use. charlcd then calls these functions through its
ops function pointer.
The functions namely are:
- hd44780_common_shift_cursor
- hd44780_common_display_shift
- hd44780_common_display
- hd44780_common_cursor
- hd44780_common_blink
- hd44780_common_fontsize
- hd44780_common_lines
Reviewed-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The init_display function is moved over to hd44780_common. charlcd uses
it via its ops function pointer and drivers initialize the ops with the
common hd44780_common_init_display function.
Reviewed-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
To turn the backlight on or off use our new enum CHARLCD_ON /
CHARLCD_OFF.
Reviewed-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
hd44780_common wants to use the charlcd_backlight function, so make it
visible.
Reviewed-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This moves the clear_display function from charlcd to hd44780_common.
This is one more step to make charlcd independent from device specific
code. The two hd44780 drivers use the new function from hd44780_common
and charlcd calls this function through its function pointer in its ops
structure.
Reviewed-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This adds a home function to the charlcd_ops struct and offer an
implementation for hd44780_common. This implementation is used by our
two hd44780 drivers. This is to make charlcd device independent.
Reviewed-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Provide a hd44780_common_gotoxy function and a pointer in the ops for
charlcd to use to move the cursor.
Reviewed-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
We create a hd44780_common_print function. It is derived from the
original charlcd_print. charlcd_print becomes a device independent print
function, that then only calls via its ops function pointers, into the
print function offered by drivers.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Move out the struct addr from struct charlcd_priv into the less private
struct charlcd. This member is used to pass position information. The
individual drivers need to be able to read this information, so we move
this out of charlcd_priv to charlcd structure.
Reviewed-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The write_cmd function is used to send commands to hd44780 displays.
The individual hd44780 drivers then implement their appropriate way of
doing this with their supported displays. So we move this pointer so
hd44780_common.
Reviewed-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This moves the write_data function pointer from struct charlcd_ops to
struct hd44780_common. This is the function that actually writes the
character to the display. This hd44780 hardware specific function is
used by two drivers at the moment.
Reviewed-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Move struct charlcd member ifwidth to our new struct hd44780_common.
ifwidth is hd44780 device specific and is used by two drivers at the
moment, so we move it to a common place, where both can use this.
Reviewed-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
hwidth is for the hardware buffer size and bwidth is for the buffer
width of one single line. This is specific to the hd44780 displays and
so it is moved out from charlcd to struct hd44780_common.
Reviewed-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
There is some hd44780 specific code in charlcd and this code is used by
multiple drivers. To make charlcd independent from this device specific
code this has to be moved to a place where the multiple drivers can
share their common code. This common place is now introduced as
hd44780_common.
Reviewed-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
We use an enum for calling the functions in charlcd, that turn the
backlight on or off. This enum is generic and can be used for other
charlcd turn on / turn off operations as well.
Reviewed-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Pull misc fixes from Miguel Ojeda:
"A trivial patch for auxdisplay:
- Replace HTTP links with HTTPS ones (Alexander A. Klimov)
The usual clang-format trivial update:
- Update with the latest for_each macro list (Miguel Ojeda)
And Luc requested me to pick a sparse fix on my queue, so here it goes
along with other two trivial Compiler Attributes ones (also from Luc).
- sparse: use static inline for __chk_{user,io}_ptr() (Luc Van
Oostenryck)
- Compiler Attributes: fix comment concerning GCC 4.6 (Luc Van
Oostenryck)
- Compiler Attributes: remove comment about sparse not supporting
__has_attribute (Luc Van Oostenryck)"
* tag 'auxdisplay-for-linus-v5.9-rc4' of git://github.com/ojeda/linux:
auxdisplay: Replace HTTP links with HTTPS ones
* tag 'clang-format-for-linus-v5.9-rc4' of git://github.com/ojeda/linux:
clang-format: Update with the latest for_each macro list
* tag 'compiler-attributes-for-linus-v5.9-rc4' of git://github.com/ojeda/linux:
sparse: use static inline for __chk_{user,io}_ptr()
Compiler Attributes: fix comment concerning GCC 4.6
Compiler Attributes: remove comment about sparse not supporting __has_attribute
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
Pull auxdisplay update from Miguel Ojeda:
"Minor cleanup for auxdisplay: rReuse hex_to_bin() instead of custom
code (Andy Shevchenko)"
* tag 'auxdisplay-for-linus-v5.9-rc1' of git://github.com/ojeda/linux:
auxdisplay: charlcd: Reuse hex_to_bin() instead of custom code
|
|
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
hex_to_bin() may be used to convert hexdecimal digit to its binary
representation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
We need the char/misc driver fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
HWRNG_MINOR and RNG_MISCDEV_MINOR are duplicate definitions, use
unified HWRNG_MINOR instead and moved into miscdevice.h
ANSLCD_MINOR and LCD_MINOR are duplicate definitions, use unified
LCD_MINOR instead and moved into miscdevice.h
MISCDEV_MINOR is renamed to PXA3XX_GCU_MINOR and moved into
miscdevice.h
Other definitions are just moved without any change.
Link: https://lore.kernel.org/lkml/20200120221323.GJ15860@mit.edu/t/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Build-tested-by: Willy TARREAU <wtarreau@haproxy.com>
Build-tested-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20200311071654.335-2-zhenzhong.duan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
drm-misc-next for v5.6:
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
|
|
Now that the fbops member of struct fb_info is const, we can start
making the ops const as well.
Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
Cc: Robin van der Gracht <robin@protonic.nl>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/31c18e3ce9d6962aabda4799b3051039ff591c92.1575390741.git.jani.nikula@intel.com
|
|
Like in commit 8b2303de399f ("serial: core: Fix handling of options
after MMIO address") we may use simple_strtoul() which in comparison to
kstrtoul() can do conversion in-place without additional and unnecessary
code to be written.
Link: http://lkml.kernel.org/r/20190801192904.41087-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Mans Rullgard <mans@mansr.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull documentation updates from Jonathan Corbet:
"It's a somewhat calmer cycle for docs this time, as the churn of the
mass RST conversion is happily mostly behind us.
- A new document on reproducible builds.
- We finally got around to zapping the documentation for hardware
support that was removed in 2004; one doesn't want to rush these
things.
- The usual assortment of fixes, typo corrections, etc"
* tag 'docs-5.4' of git://git.lwn.net/linux: (67 commits)
Documentation: kbuild: Add document about reproducible builds
docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]
Documentation: Add "earlycon=sbi" to the admin guide
doc:lock: remove reference to clever use of read-write lock
devices.txt: improve entry for comedi (char major 98)
docs: mtd: Update spi nor reference driver
doc: arm64: fix grammar dtb placed in no attributes region
Documentation: sysrq: don't recommend 'S' 'U' before 'B'
mailmap: Update email address for Quentin Perret
docs: ftrace: clarify when tracing is disabled by the trace file
docs: process: fix broken link
Documentation/arm/samsung-s3c24xx: Remove stray U+FEFF character to fix title
Documentation/arm/sa1100/assabet: Fix 'make assabet_defconfig' command
Documentation/arm/sa1100: Remove some obsolete documentation
docs/zh_CN: update Chinese howto.rst for latexdocs making
Documentation: virt: Fix broken reference to virt tree's index
docs: Fix typo on pull requests guide
kernel-doc: Allow anonymous enum
Documentation: sphinx: Don't parse socket() as identifier reference
Documentation: sphinx: Add missing comma to list of strings
...
|
|
The static structures ht16k33_fb_fix and ht16k33_fb_var, of types
fb_fix_screeninfo and fb_var_screeninfo respectively, are not used
except to be copied into other variables. Hence make both of them
constant to prevent unintended modification.
Issue found with
Coccinelle.
Acked-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
Add a header include guard just in case.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
This header is included in drivers/auxdisplay/. Make it a local header.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
While the individual CHARLCD_BL_xxx options have help texts, the
menu itself does not. Fix this.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mans Rullgard <mans@mansr.com>
[Added a bit more text to address Linus' suggestion]
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
In panel_attach, if misc_register fails, we need to delete scan_timer,
which was setup in keypad_init->init_scan_timer.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
Those two files describe userspace-faced information. While part of
it might fit on uAPI, it sounds to me that the admin guide is the
best place for them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Pull Documentation updates from Jonathan Corbet:
"It's been a relatively busy cycle for docs:
- A fair pile of RST conversions, many from Mauro. These create more
than the usual number of simple but annoying merge conflicts with
other trees, unfortunately. He has a lot more of these waiting on
the wings that, I think, will go to you directly later on.
- A new document on how to use merges and rebases in kernel repos,
and one on Spectre vulnerabilities.
- Various improvements to the build system, including automatic
markup of function() references because some people, for reasons I
will never understand, were of the opinion that
:c:func:``function()`` is unattractive and not fun to type.
- We now recommend using sphinx 1.7, but still support back to 1.4.
- Lots of smaller improvements, warning fixes, typo fixes, etc"
* tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits)
docs: automarkup.py: ignore exceptions when seeking for xrefs
docs: Move binderfs to admin-guide
Disable Sphinx SmartyPants in HTML output
doc: RCU callback locks need only _bh, not necessarily _irq
docs: format kernel-parameters -- as code
Doc : doc-guide : Fix a typo
platform: x86: get rid of a non-existent document
Add the RCU docs to the core-api manual
Documentation: RCU: Add TOC tree hooks
Documentation: RCU: Rename txt files to rst
Documentation: RCU: Convert RCU UP systems to reST
Documentation: RCU: Convert RCU linked list to reST
Documentation: RCU: Convert RCU basic concepts to reST
docs: filesystems: Remove uneeded .rst extension on toctables
scripts/sphinx-pre-install: fix out-of-tree build
docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/
Documentation: PGP: update for newer HW devices
Documentation: Add section about CPU vulnerabilities for Spectre
Documentation: platform: Delete x86-laptop-drivers.txt
docs: Note that :c:func: should no longer be used
...
|
|
While using mmap, the incorrect values of length and vm_pgoff are
ignored and this driver goes ahead with mapping fbdev.buffer
to user vma.
Convert vm_insert_pages() to use vm_map_pages_zero(). We could later
"fix" these drivers to behave according to the normal vm_pgoff
offsetting simply by removing the _zero suffix on the function name
and if that causes regressions, it gives us an easy way to revert.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Acked-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
While using mmap, the incorrect values of length and vm_pgoff are
ignored and this driver goes ahead with mapping cfag12864b_buffer
to user vma.
Convert vm_insert_pages() to use vm_map_pages_zero(). We could later
"fix" these drivers to behave according to the normal vm_pgoff
offsetting simply by removing the _zero suffix on the function name and
if that causes regressions, it gives us an easy way to revert.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
The kbuild documentation clearly shows that the documents
there are written at different times: some use markdown,
some use their own peculiar logic to split sections.
Convert everything to ReST without affecting too much
the author's style and avoiding adding uneeded markups.
The conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The charlcd driver currently flashes the backlight once on init.
This may not be desirable. Thus, add options for turning the
backlight off or on as well.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
If CONFIG_PANEL_CHANGE_MESSAGE is set, CONFIG_PANEL_BOOT_MESSAGE will
also be defined, so the double ifdef is pointless. Simplify the code
further by using an intermediate macro rather duplicating most of the
line.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
Lars Poeschel
Linus Torvalds
Gustavo A. R. Silva
Alexander A. Klimov
Masahiro Yamada
Andy Shevchenko
Greg Kroah-Hartman
Zhenzhong Duan
Gustavo A. R. Silva
Yangtao Li
Krzysztof Kozlowski
Daniel Vetter
Jani Nikula
Nishka Dasgupta
Masahiro Yamada
Mans Rullgard
zhengbin
Mauro Carvalho Chehab
Souptick Joarder
Thomas Gleixner