| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit b72053072c0b ("block: allow partitions on host aware zone
devices") introduced the helper function disk_has_partitions() to check
if a given disk has valid partitions. However, since this function result
directly depends on the disk partition table length rather than the
actual existence of valid partitions in the table, it returns true even
after all partitions are removed from the disk. For host aware zoned
block devices, this results in zone management support to be kept
disabled even after removing all partitions.
Fix this by changing disk_has_partitions() to walk through the partition
table entries and return true if and only if a valid non-zero size
partition is found.
Fixes: b72053072c0b ("block: allow partitions on host aware zone devices")
Cc: stable@vger.kernel.org # 5.5
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
commit 01e99aeca397 ("blk-mq: insert passthrough request into
hctx->dispatch directly") may change to add flush request to the tail
of dispatch by applying the 'add_head' parameter of
blk_mq_sched_insert_request.
Turns out this way causes performance regression on NCQ controller because
flush is non-NCQ command, which can't be queued when there is any in-flight
NCQ command. When adding flush rq to the front of hctx->dispatch, it is
easier to introduce extra time to flush rq's latency compared with adding
to the tail of dispatch queue because of S_SCHED_RESTART, then chance of
flush merge is increased, and less flush requests may be issued to
controller.
So always insert flush request to the front of dispatch queue just like
before applying commit 01e99aeca397 ("blk-mq: insert passthrough request
into hctx->dispatch directly").
Cc: Damien Le Moal <Damien.LeMoal@wdc.com>
Cc: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 01e99aeca397 ("blk-mq: insert passthrough request into hctx->dispatch directly")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Devices are formatted in multiple of tracks.
For an Extent Space Efficient (ESE) volume we get errors when accessing
unformatted tracks. In this case the driver either formats the track on
the flight for write requests or returns zero data for read requests.
In case a request spans multiple tracks, the indication of an unformatted
track presented for the first track is incorrectly applied to all tracks
covered by the request. As a result, tracks containing data will be handled
as empty, resulting in zero data being returned on read, or overwriting
existing data with zero on write.
Fix by determining the track that gets the NRF error.
For write requests only format the track that is surely not formatted.
For Read requests all tracks before have returned valid data and should not
be touched.
All tracks after the unformatted track might be formatted or not. Those are
returned to the blocklayer to build a new request.
When using alias devices there is a chance that multiple write requests
trigger a format of the same track which might lead to data loss. Ensure
that a track is formatted only once by maintaining a list of currently
processed tracks.
Fixes: 5e2b17e712cf ("s390/dasd: Add dynamic formatting support for ESE volumes")
Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The timeout of identify cmd, which is invoked as part of admin queue
creation, can result in freeing of async event data both in
nvme_rdma_timeout handler and error handling path of
nvme_rdma_configure_admin queue thus causing NULL pointer reference.
Call Trace:
? nvme_rdma_setup_ctrl+0x223/0x800 [nvme_rdma]
nvme_rdma_create_ctrl+0x2ba/0x3f7 [nvme_rdma]
nvmf_dev_write+0xa54/0xcc6 [nvme_fabrics]
__vfs_write+0x1b/0x40
vfs_write+0xb2/0x1b0
ksys_write+0x61/0xd0
__x64_sys_write+0x1a/0x20
do_syscall_64+0x60/0x1e0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reviewed-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Prabhath Sajeepa <psajeepa@purestorage.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
vtimes may wrap and time_before/after64() should be used to determine
whether a given vtime is before or after another. iocg_is_idle() was
incorrectly using plain "<" comparison do determine whether done_vtime
is before vtime. Here, the only thing we're interested in is whether
done_vtime matches vtime which indicates that there's nothing in
flight. Let's test for inequality instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The bfq_find_set_group() function takes as input a blkcg (which represents
a cgroup) and retrieves the corresponding bfq_group, then it updates the
bfq internal group hierarchy (see comments inside the function for why
this is needed) and finally it returns the bfq_group.
In the hierarchy update cycle, the pointer holding the correct bfq_group
that has to be returned is mistakenly used to traverse the hierarchy
bottom to top, meaning that in each iteration it gets overwritten with the
parent of the current group. Since the update cycle stops at root's
children (depth = 2), the overwrite becomes a problem only if the blkcg
describes a cgroup at a hierarchy level deeper than that (depth > 2). In
this case the root's child that happens to be also an ancestor of the
correct bfq_group is returned. The main consequence is that processes
contained in a cgroup at depth greater than 2 are wrongly placed in the
group described above by BFQ.
This commits fixes this problem by using a different bfq_group pointer in
the update cycle in order to avoid the overwrite of the variable holding
the original group reference.
Reported-by: Kwon Je Oh <kwonje.oh2@gmail.com>
Signed-off-by: Carlo Nonato <carlo.nonato95@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There was a recent change in blktrace.c that added a RCU protection to
`q->blk_trace` in order to fix a use-after-free issue during access.
However the change missed an edge case that can lead to dereferencing of
`bt` pointer even when it's NULL:
Coverity static analyzer marked this as a FORWARD_NULL issue with CID
1460458.
```
/kernel/trace/blktrace.c: 1904 in sysfs_blk_trace_attr_store()
1898 ret = 0;
1899 if (bt == NULL)
1900 ret = blk_trace_setup_queue(q, bdev);
1901
1902 if (ret == 0) {
1903 if (attr == &dev_attr_act_mask)
>>> CID 1460458: Null pointer dereferences (FORWARD_NULL)
>>> Dereferencing null pointer "bt".
1904 bt->act_mask = value;
1905 else if (attr == &dev_attr_pid)
1906 bt->pid = value;
1907 else if (attr == &dev_attr_start_lba)
1908 bt->start_lba = value;
1909 else if (attr == &dev_attr_end_lba)
```
Added a reassignment with RCU annotation to fix the issue.
Fixes: c780e86dd48 ("blktrace: Protect q->blk_trace with RCU")
Cc: stable@vger.kernel.org
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Cengiz Can <cengiz@kernel.wtf>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 0b96da639a4874311e9b5156405f69ef9fc3bef8.
We can't just go flushing random signals, under the assumption that the
OOM killer will just do something else. It's not safe from the OOM
perspective, and it could also cause other signals to get randomly lost.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit ee63cfa7fc19 ("block: add kblockd_schedule_work_on()")
introduced the helper in 2016. Remove it because since then no caller
was added.
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Completions need to consumed in the same order the controller submitted
them, otherwise future completion entries may overwrite ones we haven't
handled yet. Hold the nvme queue's poll lock while completing new CQEs to
prevent another thread from freeing command tags for reuse out-of-order.
Fixes: dabcefab45d3 ("nvme: provide optimized poll function for separate poll queues")
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The struct blk_mq_hw_ctx pointer argument in blk_mq_put_tag(),
blk_mq_poll_nsecs(), and blk_mq_poll_hybrid_sleep() is unused, so remove
it.
Overall obj code size shows a minor reduction, before:
text data bss dec hex filename
27306 1312 0 28618 6fca block/blk-mq.o
4303 272 0 4575 11df block/blk-mq-tag.o
after:
27282 1312 0 28594 6fb2 block/blk-mq.o
4311 272 0 4583 11e7 block/blk-mq-tag.o
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
--
This minor patch had been carried as part of the blk-mq shared tags RFC,
I'd rather not carry it anymore as it required rebasing, so now or never..
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
'list', 'll_list' and 'csd' are no longer used.
The 'list' is not used since it was introduced by commit f2298c0403b0
("null_blk: multi queue aware block test driver").
The 'll_list' is no longer used since commit 3c395a969acc ("null_blk: set a
separate timer for each command").
The 'csd' is no longer used since commit ce2c350b2cfe ("null_blk: use
blk_complete_request and blk_mq_complete_request").
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
KASAN is reporting that __blk_add_trace() has a use-after-free issue
when accessing q->blk_trace. Indeed the switching of block tracing (and
thus eventual freeing of q->blk_trace) is completely unsynchronized with
the currently running tracing and thus it can happen that the blk_trace
structure is being freed just while __blk_add_trace() works on it.
Protect accesses to q->blk_trace by RCU during tracing and make sure we
wait for the end of RCU grace period when shutting down tracing. Luckily
that is rare enough event that we can afford that. Note that postponing
the freeing of blk_trace to an RCU callback should better be avoided as
it could have unexpected user visible side-effects as debugfs files
would be still existing for a short while block tracing has been shut
down.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205711
CC: stable@vger.kernel.org
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reported-by: Tristan Madani <tristmd@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For some reason, device may be in one situation which can't handle
FS request, so STS_RESOURCE is always returned and the FS request
will be added to hctx->dispatch. However passthrough request may
be required at that time for fixing the problem. If passthrough
request is added to scheduler queue, there isn't any chance for
blk-mq to dispatch it given we prioritize requests in hctx->dispatch.
Then the FS IO request may never be completed, and IO hang is caused.
So passthrough request has to be added to hctx->dispatch directly
for fixing the IO hang.
Fix this issue by inserting passthrough request into hctx->dispatch
directly together withing adding FS request to the tail of
hctx->dispatch in blk_mq_dispatch_rq_list(). Actually we add FS request
to tail of hctx->dispatch at default, see blk_mq_request_bypass_insert().
Then it becomes consistent with original legacy IO request
path, in which passthrough request is always added to q->queue_head.
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
|
|
The C-Sky platform code is not a clock provider, and just needs to call
of_clk_init().
Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
|
|
Since commit a3a0e43fd770 ("io_uring: don't enter poll loop if we have
CQEs pending"), if we already events pending, we won't enter poll loop.
In case SETUP_IOPOLL and SETUP_SQPOLL are both enabled, if app has
been terminated and don't reap pending events which are already in cq
ring, and there are some reqs in poll_list, io_sq_thread will enter
__io_iopoll_check(), and find pending events, then return, this loop
will never have a chance to exit.
I have seen this issue in fio stress tests, to fix this issue, let
io_sq_thread call io_iopoll_getevents() with argument 'min' being zero,
and remove __io_iopoll_check().
Fixes: a3a0e43fd770 ("io_uring: don't enter poll loop if we have CQEs pending")
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When CONFIG_QFMT_V2 is configured as a module, the test in
ext4_feature_set_ok() fails and so mount of filesystems with quota or
project features fails. Fix the test to use IS_ENABLED macro which
works properly even for modules.
Link: https://lore.kernel.org/r/20200221100835.9332-1-jack@suse.cz
Fixes: d65d87a07476 ("ext4: improve explanation of a mount failure caused by a misconfigured kernel")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
I found a NULL pointer dereference in ocfs2_block_group_clear_bits().
The running environment:
kernel version: 4.19
A cluster with two nodes, 5 luns mounted on two nodes, and do some
file operations like dd/fallocate/truncate/rm on every lun with storage
network disconnection.
The fallocate operation on dm-23-45 caused an null pointer dereference.
The information of NULL pointer dereference as follows:
[577992.878282] JBD2: Error -5 detected when updating journal superblock for dm-23-45.
[577992.878290] Aborting journal on device dm-23-45.
...
[577992.890778] JBD2: Error -5 detected when updating journal superblock for dm-24-46.
[577992.890908] __journal_remove_journal_head: freeing b_committed_data
[577992.890916] (fallocate,88392,52):ocfs2_extend_trans:474 ERROR: status = -30
[577992.890918] __journal_remove_journal_head: freeing b_committed_data
[577992.890920] (fallocate,88392,52):ocfs2_rotate_tree_right:2500 ERROR: status = -30
[577992.890922] __journal_remove_journal_head: freeing b_committed_data
[577992.890924] (fallocate,88392,52):ocfs2_do_insert_extent:4382 ERROR: status = -30
[577992.890928] (fallocate,88392,52):ocfs2_insert_extent:4842 ERROR: status = -30
[577992.890928] __journal_remove_journal_head: freeing b_committed_data
[577992.890930] (fallocate,88392,52):ocfs2_add_clusters_in_btree:4947 ERROR: status = -30
[577992.890933] __journal_remove_journal_head: freeing b_committed_data
[577992.890939] __journal_remove_journal_head: freeing b_committed_data
[577992.890949] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
[577992.890950] Mem abort info:
[577992.890951] ESR = 0x96000004
[577992.890952] Exception class = DABT (current EL), IL = 32 bits
[577992.890952] SET = 0, FnV = 0
[577992.890953] EA = 0, S1PTW = 0
[577992.890954] Data abort info:
[577992.890955] ISV = 0, ISS = 0x00000004
[577992.890956] CM = 0, WnR = 0
[577992.890958] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000f8da07a9
[577992.890960] [0000000000000020] pgd=0000000000000000
[577992.890964] Internal error: Oops: 96000004 [#1] SMP
[577992.890965] Process fallocate (pid: 88392, stack limit = 0x00000000013db2fd)
[577992.890968] CPU: 52 PID: 88392 Comm: fallocate Kdump: loaded Tainted: G W OE 4.19.36 #1
[577992.890969] Hardware name: Huawei TaiShan 2280 V2/BC82AMDD, BIOS 0.98 08/25/2019
[577992.890971] pstate: 60400009 (nZCv daif +PAN -UAO)
[577992.891054] pc : _ocfs2_free_suballoc_bits+0x63c/0x968 [ocfs2]
[577992.891082] lr : _ocfs2_free_suballoc_bits+0x618/0x968 [ocfs2]
[577992.891084] sp : ffff0000c8e2b810
[577992.891085] x29: ffff0000c8e2b820 x28: 0000000000000000
[577992.891087] x27: 00000000000006f3 x26: ffffa07957b02e70
[577992.891089] x25: ffff807c59d50000 x24: 00000000000006f2
[577992.891091] x23: 0000000000000001 x22: ffff807bd39abc30
[577992.891093] x21: ffff0000811d9000 x20: ffffa07535d6a000
[577992.891097] x19: ffff000001681638 x18: ffffffffffffffff
[577992.891098] x17: 0000000000000000 x16: ffff000080a03df0
[577992.891100] x15: ffff0000811d9708 x14: 203d207375746174
[577992.891101] x13: 73203a524f525245 x12: 20373439343a6565
[577992.891103] x11: 0000000000000038 x10: 0101010101010101
[577992.891106] x9 : ffffa07c68a85d70 x8 : 7f7f7f7f7f7f7f7f
[577992.891109] x7 : 0000000000000000 x6 : 0000000000000080
[577992.891110] x5 : 0000000000000000 x4 : 0000000000000002
[577992.891112] x3 : ffff000001713390 x2 : 2ff90f88b1c22f00
[577992.891114] x1 : ffff807bd39abc30 x0 : 0000000000000000
[577992.891116] Call trace:
[577992.891139] _ocfs2_free_suballoc_bits+0x63c/0x968 [ocfs2]
[577992.891162] _ocfs2_free_clusters+0x100/0x290 [ocfs2]
[577992.891185] ocfs2_free_clusters+0x50/0x68 [ocfs2]
[577992.891206] ocfs2_add_clusters_in_btree+0x198/0x5e0 [ocfs2]
[577992.891227] ocfs2_add_inode_data+0x94/0xc8 [ocfs2]
[577992.891248] ocfs2_extend_allocation+0x1bc/0x7a8 [ocfs2]
[577992.891269] ocfs2_allocate_extents+0x14c/0x338 [ocfs2]
[577992.891290] __ocfs2_change_file_space+0x3f8/0x610 [ocfs2]
[577992.891309] ocfs2_fallocate+0xe4/0x128 [ocfs2]
[577992.891316] vfs_fallocate+0x11c/0x250
[577992.891317] ksys_fallocate+0x54/0x88
[577992.891319] __arm64_sys_fallocate+0x28/0x38
[577992.891323] el0_svc_common+0x78/0x130
[577992.891325] el0_svc_handler+0x38/0x78
[577992.891327] el0_svc+0x8/0xc
My analysis process as follows:
ocfs2_fallocate
__ocfs2_change_file_space
ocfs2_allocate_extents
ocfs2_extend_allocation
ocfs2_add_inode_data
ocfs2_add_clusters_in_btree
ocfs2_insert_extent
ocfs2_do_insert_extent
ocfs2_rotate_tree_right
ocfs2_extend_rotate_transaction
ocfs2_extend_trans
jbd2_journal_restart
jbd2__journal_restart
/* handle->h_transaction is NULL,
* is_handle_aborted(handle) is true
*/
handle->h_transaction = NULL;
start_this_handle
return -EROFS;
ocfs2_free_clusters
_ocfs2_free_clusters
_ocfs2_free_suballoc_bits
ocfs2_block_group_clear_bits
ocfs2_journal_access_gd
__ocfs2_journal_access
jbd2_journal_get_undo_access
/* I think jbd2_write_access_granted() will
* return true, because do_get_write_access()
* will return -EROFS.
*/
if (jbd2_write_access_granted(...)) return 0;
do_get_write_access
/* handle->h_transaction is NULL, it will
* return -EROFS here, so do_get_write_access()
* was not called.
*/
if (is_handle_aborted(handle)) return -EROFS;
/* bh2jh(group_bh) is NULL, caused NULL
pointer dereference */
undo_bg = (struct ocfs2_group_desc *)
bh2jh(group_bh)->b_committed_data;
If handle->h_transaction == NULL, then jbd2_write_access_granted()
does not really guarantee that journal_head will stay around,
not even speaking of its b_committed_data. The bh2jh(group_bh)
can be removed after ocfs2_journal_access_gd() and before call
"bh2jh(group_bh)->b_committed_data". So, we should move
is_handle_aborted() check from do_get_write_access() into
jbd2_journal_get_undo_access() and jbd2_journal_get_write_access()
before the call to jbd2_write_access_granted().
Link: https://lore.kernel.org/r/f72a623f-b3f1-381a-d91d-d22a1c83a336@huawei.com
Signed-off-by: Yan Wang <wangyan122@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
|
|
If EXT4_EXTENTS_FL is set on an inode while ext4_writepages() is running
on it, the following warning in ext4_add_complete_io() can be hit:
WARNING: CPU: 1 PID: 0 at fs/ext4/page-io.c:234 ext4_put_io_end_defer+0xf0/0x120
Here's a minimal reproducer (not 100% reliable) (root isn't required):
while true; do
sync
done &
while true; do
rm -f file
touch file
chattr -e file
echo X >> file
chattr +e file
done
The problem is that in ext4_writepages(), ext4_should_dioread_nolock()
(which only returns true on extent-based files) is checked once to set
the number of reserved journal credits, and also again later to select
the flags for ext4_map_blocks() and copy the reserved journal handle to
ext4_io_end::handle. But if EXT4_EXTENTS_FL is being concurrently set,
the first check can see dioread_nolock disabled while the later one can
see it enabled, causing the reserved handle to unexpectedly be NULL.
Since changing EXT4_EXTENTS_FL is uncommon, and there may be other races
related to doing so as well, fix this by synchronizing changing
EXT4_EXTENTS_FL with ext4_writepages() via the existing
s_writepages_rwsem (previously called s_journal_flag_rwsem).
This was originally reported by syzbot without a reproducer at
https://syzkaller.appspot.com/bug?extid=2202a584a00fffd19fbf,
but now that dioread_nolock is the default I also started seeing this
when running syzkaller locally.
Link: https://lore.kernel.org/r/20200219183047.47417-3-ebiggers@kernel.org
Reported-by: syzbot+2202a584a00fffd19fbf@syzkaller.appspotmail.com
Fixes: 6b523df4fb5a ("ext4: use transaction reservation for extent conversion in ext4_end_io")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
|
|
In preparation for making s_journal_flag_rwsem synchronize
ext4_writepages() with changes to both the EXTENTS and JOURNAL_DATA
flags (rather than just JOURNAL_DATA as it does currently), rename it to
s_writepages_rwsem.
Link: https://lore.kernel.org/r/20200219183047.47417-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
|
|
During an online resize an array of s_flex_groups structures gets replaced
so it can get enlarged. If there is a concurrent access to the array and
this memory has been reused then this can lead to an invalid memory access.
The s_flex_group array has been converted into an array of pointers rather
than an array of structures. This is to ensure that the information
contained in the structures cannot get out of sync during a resize due to
an accessor updating the value in the old structure after it has been
copied but before the array pointer is updated. Since the structures them-
selves are no longer copied but only the pointers to them this case is
mitigated.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443
Link: https://lore.kernel.org/r/20200221053458.730016-4-tytso@mit.edu
Signed-off-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
Use tabs for indentation instead of spaces for SAFESETID. All (!) other
entries in MAINTAINERS use tabs (according to my simple grepping).
Link: http://lkml.kernel.org/r/2bb2e52a-2694-816d-57b4-6cabfadd6c1a@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Micah Morton <mortonm@chromium.org>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Walter Wu has reported a potential case in which init_stack_slab() is
called after stack_slabs[STACK_ALLOC_MAX_SLABS - 1] has already been
initialized. In that case init_stack_slab() will overwrite
stack_slabs[STACK_ALLOC_MAX_SLABS], which may result in a memory
corruption.
Link: http://lkml.kernel.org/r/20200218102950.260263-1-glider@google.com
Fixes: cd11016e5f521 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Walter Wu <walter-zh.wu@mediatek.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When we use SPARSEMEM instead of SPARSEMEM_VMEMMAP, pfn_to_page()
doesn't work before sparse_init_one_section() is called.
This leads to a crash when hotplug memory:
BUG: unable to handle page fault for address: 0000000006400000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 3 PID: 221 Comm: kworker/u16:1 Tainted: G W 5.5.0-next-20200205+ #343
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
RIP: 0010:__memset+0x24/0x30
Code: cc cc cc cc cc cc 0f 1f 44 00 00 49 89 f9 48 89 d1 83 e2 07 48 c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 <f3> 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 f3
RSP: 0018:ffffb43ac0373c80 EFLAGS: 00010a87
RAX: ffffffffffffffff RBX: ffff8a1518800000 RCX: 0000000000050000
RDX: 0000000000000000 RSI: 00000000000000ff RDI: 0000000006400000
RBP: 0000000000140000 R08: 0000000000100000 R09: 0000000006400000
R10: 0000000000000000 R11: 0000000000000002 R12: 0000000000000000
R13: 0000000000000028 R14: 0000000000000000 R15: ffff8a153ffd9280
FS: 0000000000000000(0000) GS:ffff8a153ab00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000006400000 CR3: 0000000136fca000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
sparse_add_section+0x1c9/0x26a
__add_pages+0xbf/0x150
add_pages+0x12/0x60
add_memory_resource+0xc8/0x210
__add_memory+0x62/0xb0
acpi_memory_device_add+0x13f/0x300
acpi_bus_attach+0xf6/0x200
acpi_bus_scan+0x43/0x90
acpi_device_hotplug+0x275/0x3d0
acpi_hotplug_work_fn+0x1a/0x30
process_one_work+0x1a7/0x370
worker_thread+0x30/0x380
kthread+0x112/0x130
ret_from_fork+0x35/0x40
We should use memmap as it did.
On x86 the impact is limited to x86_32 builds, or x86_64 configurations
that override the default setting for SPARSEMEM_VMEMMAP.
Other memory hotplug archs (arm64, ia64, and ppc) also default to
SPARSEMEM_VMEMMAP=y.
[dan.j.williams@intel.com: changelog update]
{rppt@linux.ibm.com: changelog update]
Link: http://lkml.kernel.org/r/20200219030454.4844-1-bhe@redhat.com
Fixes: ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug")
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 68600f623d69 ("mm: don't miss the last page because of round-off
error") makes the scan size round up to @denominator regardless of the
memory cgroup's state, online or offline. This affects the overall
reclaiming behavior: the corresponding LRU list is eligible for
reclaiming only when its size logically right shifted by @sc->priority
is bigger than zero in the former formula.
For example, the inactive anonymous LRU list should have at least 0x4000
pages to be eligible for reclaiming when we have 60/12 for
swappiness/priority and without taking scan/rotation ratio into account.
After the roundup is applied, the inactive anonymous LRU list becomes
eligible for reclaiming when its size is bigger than or equal to 0x1000
in the same condition.
(0x4000 >> 12) * 60 / (60 + 140 + 1) = 1
((0x1000 >> 12) * 60) + 200) / (60 + 140 + 1) = 1
aarch64 has 512MB huge page size when the base page size is 64KB. The
memory cgroup that has a huge page is always eligible for reclaiming in
that case.
The reclaiming is likely to stop after the huge page is reclaimed,
meaing the further iteration on @sc->priority and the silbing and child
memory cgroups will be skipped. The overall behaviour has been changed.
This fixes the issue by applying the roundup to offlined memory cgroups
only, to give more preference to reclaim memory from offlined memory
cgroup. It sounds reasonable as those memory is unlikedly to be used by
anyone.
The issue was found by starting up 8 VMs on a Ampere Mustang machine,
which has 8 CPUs and 16 GB memory. Each VM is given with 2 vCPUs and
2GB memory. It took 264 seconds for all VMs to be completely up and
784MB swap is consumed after that. With this patch applied, it took 236
seconds and 60MB swap to do same thing. So there is 10% performance
improvement for my case. Note that KSM is disable while THP is enabled
in the testing.
total used free shared buff/cache available
Mem: 16196 10065 2049 16 4081 3749
Swap: 8175 784 7391
total used free shared buff/cache available
Mem: 16196 11324 3656 24 1215 2936
Swap: 8175 60 8115
Link: http://lkml.kernel.org/r/20200211024514.8730-1-gshan@redhat.com
Fixes: 68600f623d69 ("mm: don't miss the last page because of round-off error")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org> [4.20+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There were a few attempts at changing behavior of the match_string()
helpers (i.e. 'match_string()' & 'sysfs_match_string()'), to change &
extend the behavior according to the doc-string.
But the simplest approach is to just fix the doc-strings. The current
behavior is fine as-is, and some bugs were introduced trying to fix it.
As for extending the behavior, new helpers can always be introduced if
needed.
The match_string() helpers behave more like 'strncmp()' in the sense
that they go up to n elements or until the first NULL element in the
array of strings.
This change updates the doc-strings with this info.
Link: http://lkml.kernel.org/r/20200213072722.8249-1-alexandru.ardelean@analog.com
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Tobin C . Harding" <tobin@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
for_each_mem_cgroup() increases css reference counter for memory cgroup
and requires to use mem_cgroup_iter_break() if the walk is cancelled.
Link: http://lkml.kernel.org/r/c98414fb-7e1f-da0f-867a-9340ec4bd30b@virtuozzo.com
Fixes: 0a4465d34028 ("mm, memcg: assign memcg-aware shrinkers bitmap to memcg")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
claim_swapfile now always takes i_rwsem.
Link: http://lkml.kernel.org/r/20200114161225.309792-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Recently, I found that get_maintainer was causing me to send emails to
the old addresses for maintainers. Since I usually just trust the
output of get_maintainer to know the right email address, I didn't even
look carefully and fired off two patch series that went to the wrong
place. Oops.
The problem was introduced recently when trying to add signatures from
Fixes. The problem was that these email addresses were added too early
in the process of compiling our list of places to send. Things added to
the list earlier are considered more canonical and when we later added
maintainer entries we ended up deduplicating to the old address.
Here are two examples using mainline commits (to make it easier to
replicate) for the two maintainers that I messed up recently:
$ git format-patch d8549bcd0529~..d8549bcd0529
$ ./scripts/get_maintainer.pl 0001-clk-Add-clk_hw*.patch | grep Boyd
Stephen Boyd <sboyd@codeaurora.org>...
$ git format-patch 6d1238aa3395~..6d1238aa3395
$ ./scripts/get_maintainer.pl 0001-arm64-dts-qcom-qcs404*.patch | grep Andy
Andy Gross <andy.gross@linaro.org>
Let's move the adding of addresses from Fixes: to the end since the
email addresses from these are much more likely to be older.
After this patch the above examples get the right addresses for the two
examples.
Link: http://lkml.kernel.org/r/20200127095001.1.I41fba9f33590bfd92cd01960161d8384268c6569@changeid
Fixes: 2f5bd343694e ("scripts/get_maintainer.pl: add signatures from Fixes: <badcommit> lines in commit message")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Joe Perches <joe@perches.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 1ca84ed6425f ("MAINTAINERS: Reclaim the P: tag for Maintainer
Entry Profile") changed the use of the "P:" tag from "Person" to
"Profile (ie: special subsystem coding styles and characteristics)"
Change how get_maintainer.pl parses the "P:" tag to match.
Link: http://lkml.kernel.org/r/ca53823fc5d25c0be32ad937d0207a0589c08643.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Dan Williams <dan.j.william@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The commits introducing 'mlock-random-test'[1], 'map_fiex_noreplace'[2],
and 'thuge-gen'[3] have not added those in the 'run_vmtests' script and
thus the 'run_tests' command of kselftests doesn't run those. This
commit adds those in the script.
'gup_benchmark' and 'transhuge-stress' are also not included in the
'run_vmtests', but this commit does not add those because those are for
performance measurement rather than pass/fail tests.
[1] commit 26b4224d9961 ("selftests: expanding more mlock selftest")
[2] commit 91cbacc34512 ("tools/testing/selftests/vm/map_fixed_noreplace.c: add test for MAP_FIXED_NOREPLACE")
[3] commit fcc1f2d5dd34 ("selftests: add a test program for variable huge page sizes in mmap/shmget")
Link: http://lkml.kernel.org/r/20200206085144.29126-1-sj38.park@gmail.com
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
QEMU has a funny new build error message when I use the upstream kernel
headers:
CC block/file-posix.o
In file included from /home/cborntra/REPOS/qemu/include/qemu/timer.h:4,
from /home/cborntra/REPOS/qemu/include/qemu/timed-average.h:29,
from /home/cborntra/REPOS/qemu/include/block/accounting.h:28,
from /home/cborntra/REPOS/qemu/include/block/block_int.h:27,
from /home/cborntra/REPOS/qemu/block/file-posix.c:30:
/usr/include/linux/swab.h: In function `__swab':
/home/cborntra/REPOS/qemu/include/qemu/bitops.h:20:34: error: "sizeof" is not defined, evaluates to 0 [-Werror=undef]
20 | #define BITS_PER_LONG (sizeof (unsigned long) * BITS_PER_BYTE)
| ^~~~~~
/home/cborntra/REPOS/qemu/include/qemu/bitops.h:20:41: error: missing binary operator before token "("
20 | #define BITS_PER_LONG (sizeof (unsigned long) * BITS_PER_BYTE)
| ^
cc1: all warnings being treated as errors
make: *** [/home/cborntra/REPOS/qemu/rules.mak:69: block/file-posix.o] Error 1
rm tests/qemu-iotests/socket_scm_helper.o
This was triggered by commit d5767057c9a ("uapi: rename ext2_swab() to
swab() and share globally in swab.h"). That patch is doing
#include <asm/bitsperlong.h>
but it uses BITS_PER_LONG.
The kernel file asm/bitsperlong.h provide only __BITS_PER_LONG.
Let us use the __ variant in swap.h
Link: http://lkml.kernel.org/r/20200213142147.17604-1-borntraeger@de.ibm.com
Fixes: d5767057c9a ("uapi: rename ext2_swab() to swab() and share globally in swab.h")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Joe Perches <joe@perches.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit a97955844807e327df11aa33869009d14d6b7de0.
Commit a97955844807 ("ipc,sem: remove uneeded sem_undo_list lock usage
in exit_sem()") removes a lock that is needed. This leads to a process
looping infinitely in exit_sem() and can also lead to a crash. There is
a reproducer available in [1] and with the commit reverted the issue
does not reproduce anymore.
Using the reproducer found in [1] is fairly easy to reach a point where
one of the child processes is looping infinitely in exit_sem between
for(;;) and if (semid == -1) block, while it's trying to free its last
sem_undo structure which has already been freed by freeary().
Each sem_undo struct is on two lists: one per semaphore set (list_id)
and one per process (list_proc). The list_id list tracks undos by
semaphore set, and the list_proc by process.
Undo structures are removed either by freeary() or by exit_sem(). The
freeary function is invoked when the user invokes a syscall to remove a
semaphore set. During this operation freeary() traverses the list_id
associated with the semaphore set and removes the undo structures from
both the list_id and list_proc lists.
For this case, exit_sem() is called at process exit. Each process
contains a struct sem_undo_list (referred to as "ulp") which contains
the head for the list_proc list. When the process exits, exit_sem()
traverses this list to remove each sem_undo struct. As in freeary(),
whenever a sem_undo struct is removed from list_proc, it is also removed
from the list_id list.
Removing elements from list_id is safe for both exit_sem() and freeary()
due to sem_lock(). Removing elements from list_proc is not safe;
freeary() locks &un->ulp->lock when it performs
list_del_rcu(&un->list_proc) but exit_sem() does not (locking was
removed by commit a97955844807 ("ipc,sem: remove uneeded sem_undo_list
lock usage in exit_sem()").
This can result in the following situation while executing the
reproducer [1] : Consider a child process in exit_sem() and the parent
in freeary() (because of semctl(sid[i], NSEM, IPC_RMID)).
- The list_proc for the child contains the last two undo structs A and
B (the rest have been removed either by exit_sem() or freeary()).
- The semid for A is 1 and semid for B is 2.
- exit_sem() removes A and at the same time freeary() removes B.
- Since A and B have different semid sem_lock() will acquire different
locks for each process and both can proceed.
The bug is that they remove A and B from the same list_proc at the same
time because only freeary() acquires the ulp lock. When exit_sem()
removes A it makes ulp->list_proc.next to point at B and at the same
time freeary() removes B setting B->semid=-1.
At the next iteration of for(;;) loop exit_sem() will try to remove B.
The only way to break from for(;;) is for (&un->list_proc ==
&ulp->list_proc) to be true which is not. Then exit_sem() will check if
B->semid=-1 which is and will continue looping in for(;;) until the
memory for B is reallocated and the value at B->semid is changed.
At that point, exit_sem() will crash attempting to unlink B from the
lists (this can be easily triggered by running the reproducer [1] a
second time).
To prove this scenario instrumentation was added to keep information
about each sem_undo (un) struct that is removed per process and per
semaphore set (sma).
CPU0 CPU1
[caller holds sem_lock(sma for A)] ...
freeary() exit_sem()
... ...
... sem_lock(sma for B)
spin_lock(A->ulp->lock) ...
list_del_rcu(un_A->list_proc) list_del_rcu(un_B->list_proc)
Undo structures A and B have different semid and sem_lock() operations
proceed. However they belong to the same list_proc list and they are
removed at the same time. This results into ulp->list_proc.next
pointing to the address of B which is already removed.
After reverting commit a97955844807 ("ipc,sem: remove uneeded
sem_undo_list lock usage in exit_sem()") the issue was no longer
reproducible.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1694779
Link: http://lkml.kernel.org/r/20191211191318.11860-1-ioanna-maria.alifieraki@canonical.com
Fixes: a97955844807 ("ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()")
Signed-off-by: Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Herton R. Krzesinski <herton@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: <malat@debian.org>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jay Vosburgh <jay.vosburgh@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are no in-kernel users remaining, but there may still be users that
include linux/time.h instead of sys/time.h from user space, so leave the
types available to user space while hiding them from kernel space.
Only the __kernel_old_* versions of these types remain now.
Link: http://lkml.kernel.org/r/20200110154232.4104492-4-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
No users remain, so kill these off before we grow new ones.
Link: http://lkml.kernel.org/r/20200110154232.4104492-3-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A couple of helpers are now obsolete and can be removed, so drivers can no
longer start using them and instead use y2038-safe interfaces.
Link: http://lkml.kernel.org/r/20200110154232.4104492-2-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from
waking up the system") overlooked the fact that fixed events can wake
up the system too and broke RTC wakeup from suspend-to-idle as a
result.
Fix this issue by checking the fixed events in acpi_s2idle_wake() in
addition to checking wakeup GPEs and break out of the suspend-to-idle
loop if the status bits of any enabled fixed events are set then.
Fixes: fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system")
Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Loading the driver on a system with W83627DHG-P crashes as follows.
w83627ehf: Found W83627DHG-P chip at 0x290
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 0 PID: 604 Comm: sensors Not tainted 5.6.0-rc2-00055-gca7e1fd1026c #29
Hardware name: /D425KT, BIOS MWPNT10N.86A.0132.2013.0726.1534 07/26/2013
RIP: 0010:w83627ehf_read_string+0x27/0x70 [w83627ehf]
Code: [... ]
RSP: 0018:ffffb95980657df8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff96caaa7f5218 RCX: 0000000000000000
RDX: 0000000000000015 RSI: 0000000000000001 RDI: ffff96caa736ec08
RBP: 0000000000000000 R08: ffffb95980657e20 R09: 0000000000000001
R10: ffff96caaa635cc0 R11: 0000000000000000 R12: ffff96caa9f7cf00
R13: ffff96caa9ec3d00 R14: ffff96caa9ec3d28 R15: ffff96caa9ec3d40
FS: 00007fbc7c4e2740(0000) GS:ffff96caabc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000129d58000 CR4: 00000000000006f0
Call Trace:
? cp_new_stat+0x12d/0x160
hwmon_attr_show_string+0x37/0x70 [hwmon]
dev_attr_show+0x14/0x50
sysfs_kf_seq_show+0xb5/0x1b0
seq_read+0xcf/0x460
vfs_read+0x9b/0x150
ksys_read+0x5f/0xe0
do_syscall_64+0x48/0x190
entry_SYSCALL_64_after_hwframe+0x44/0xa9
...
Temperature labels are not always present. Adjust sysfs attribute
visibility accordingly.
Reported-by: Meelis Roos <mroos@linux.ee>
Suggested-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Meelis Roos <mroos@linux.ee>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Fixes: 266cd5835947 ("hwmon: (w83627ehf) convert to with_info interface")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This patch drops 'cur_mm' before calling cond_resched(), to prevent
the sq_thread from spinning even when the user process is finished.
Before this patch, if the user process ended without closing the
io_uring fd, the sq_thread continues to spin until the
'sq_thread_idle' timeout ends.
In the worst case where the 'sq_thread_idle' parameter is bigger than
INT_MAX, the sq_thread will spin forever.
Fixes: 6c271ce2f1d5 ("io_uring: add submission polling")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While logging the prealloc extents of an inode during a fast fsync we call
btrfs_truncate_inode_items(), through btrfs_log_prealloc_extents(), while
holding a read lock on a leaf of the inode's root (not the log root, the
fs/subvol root), and then that function locks the file range in the inode's
iotree. This can lead to a deadlock when:
* the fsync is ranged
* the file has prealloc extents beyond eof
* writeback for a range different from the fsync range starts
during the fsync
* the size of the file is not sector size aligned
Because when finishing an ordered extent we lock first a file range and
then try to COW the fs/subvol tree to insert an extent item.
The following diagram shows how the deadlock can happen.
CPU 1 CPU 2
btrfs_sync_file()
--> for range [0, 1MiB)
--> inode has a size of
1MiB and has 1 prealloc
extent beyond the
i_size, starting at offset
4MiB
flushes all delalloc for the
range [0MiB, 1MiB) and waits
for the respective ordered
extents to complete
--> before task at CPU 1 locks the
inode, a write into file range
[1MiB, 2MiB + 1KiB) is made
--> i_size is updated to 2MiB + 1KiB
--> writeback is started for that
range, [1MiB, 2MiB + 4KiB)
--> end offset rounded up to
be sector size aligned
btrfs_log_dentry_safe()
btrfs_log_inode_parent()
btrfs_log_inode()
btrfs_log_changed_extents()
btrfs_log_prealloc_extents()
--> does a search on the
inode's root
--> holds a read lock on
leaf X
btrfs_finish_ordered_io()
--> locks range [1MiB, 2MiB + 4KiB)
--> end offset rounded up
to be sector size aligned
--> tries to cow leaf X, through
insert_reserved_file_extent()
--> already locked by the
task at CPU 1
btrfs_truncate_inode_items()
--> gets an i_size of
2MiB + 1KiB, which is
not sector size
aligned
--> tries to lock file
range [2MiB, (u64)-1)
--> the start range
is rounded down
from 2MiB + 1K
to 2MiB to be sector
size aligned
--> but the subrange
[2MiB, 2MiB + 4KiB) is
already locked by
task at CPU 2 which
is waiting to get a
write lock on leaf X
for which we are
holding a read lock
*** deadlock ***
This results in a stack trace like the following, triggered by test case
generic/561 from fstests:
[ 2779.973608] INFO: task kworker/u8:6:247 blocked for more than 120 seconds.
[ 2779.979536] Not tainted 5.6.0-rc2-btrfs-next-53 #1
[ 2779.984503] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2779.990136] kworker/u8:6 D 0 247 2 0x80004000
[ 2779.990457] Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
[ 2779.990466] Call Trace:
[ 2779.990491] ? __schedule+0x384/0xa30
[ 2779.990521] schedule+0x33/0xe0
[ 2779.990616] btrfs_tree_read_lock+0x19e/0x2e0 [btrfs]
[ 2779.990632] ? remove_wait_queue+0x60/0x60
[ 2779.990730] btrfs_read_lock_root_node+0x2f/0x40 [btrfs]
[ 2779.990782] btrfs_search_slot+0x510/0x1000 [btrfs]
[ 2779.990869] btrfs_lookup_file_extent+0x4a/0x70 [btrfs]
[ 2779.990944] __btrfs_drop_extents+0x161/0x1060 [btrfs]
[ 2779.990987] ? mark_held_locks+0x6d/0xc0
[ 2779.990994] ? __slab_alloc.isra.49+0x99/0x100
[ 2779.991060] ? insert_reserved_file_extent.constprop.19+0x64/0x300 [btrfs]
[ 2779.991145] insert_reserved_file_extent.constprop.19+0x97/0x300 [btrfs]
[ 2779.991222] ? start_transaction+0xdd/0x5c0 [btrfs]
[ 2779.991291] btrfs_finish_ordered_io+0x4f4/0x840 [btrfs]
[ 2779.991405] btrfs_work_helper+0xaa/0x720 [btrfs]
[ 2779.991432] process_one_work+0x26d/0x6a0
[ 2779.991460] worker_thread+0x4f/0x3e0
[ 2779.991481] ? process_one_work+0x6a0/0x6a0
[ 2779.991489] kthread+0x103/0x140
[ 2779.991499] ? kthread_create_worker_on_cpu+0x70/0x70
[ 2779.991515] ret_from_fork+0x3a/0x50
(...)
[ 2780.026211] INFO: task fsstress:17375 blocked for more than 120 seconds.
[ 2780.027480] Not tainted 5.6.0-rc2-btrfs-next-53 #1
[ 2780.028482] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2780.030035] fsstress D 0 17375 17373 0x00004000
[ 2780.030038] Call Trace:
[ 2780.030044] ? __schedule+0x384/0xa30
[ 2780.030052] schedule+0x33/0xe0
[ 2780.030075] lock_extent_bits+0x20c/0x320 [btrfs]
[ 2780.030094] ? btrfs_truncate_inode_items+0xf4/0x1150 [btrfs]
[ 2780.030098] ? rcu_read_lock_sched_held+0x59/0xa0
[ 2780.030102] ? remove_wait_queue+0x60/0x60
[ 2780.030122] btrfs_truncate_inode_items+0x133/0x1150 [btrfs]
[ 2780.030151] ? btrfs_set_path_blocking+0xb2/0x160 [btrfs]
[ 2780.030165] ? btrfs_search_slot+0x379/0x1000 [btrfs]
[ 2780.030195] btrfs_log_changed_extents.isra.8+0x841/0x93e [btrfs]
[ 2780.030202] ? do_raw_spin_unlock+0x49/0xc0
[ 2780.030215] ? btrfs_get_num_csums+0x10/0x10 [btrfs]
[ 2780.030239] btrfs_log_inode+0xf83/0x1124 [btrfs]
[ 2780.030251] ? __mutex_unlock_slowpath+0x45/0x2a0
[ 2780.030275] btrfs_log_inode_parent+0x2a0/0xe40 [btrfs]
[ 2780.030282] ? dget_parent+0xa1/0x370
[ 2780.030309] btrfs_log_dentry_safe+0x4a/0x70 [btrfs]
[ 2780.030329] btrfs_sync_file+0x3f3/0x490 [btrfs]
[ 2780.030339] do_fsync+0x38/0x60
[ 2780.030343] __x64_sys_fdatasync+0x13/0x20
[ 2780.030345] do_syscall_64+0x5c/0x280
[ 2780.030348] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 2780.030356] RIP: 0033:0x7f2d80f6d5f0
[ 2780.030361] Code: Bad RIP value.
[ 2780.030362] RSP: 002b:00007ffdba3c8548 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 2780.030364] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f2d80f6d5f0
[ 2780.030365] RDX: 00007ffdba3c84b0 RSI: 00007ffdba3c84b0 RDI: 0000000000000003
[ 2780.030367] RBP: 000000000000004a R08: 0000000000000001 R09: 00007ffdba3c855c
[ 2780.030368] R10: 0000000000000078 R11: 0000000000000246 R12: 00000000000001f4
[ 2780.030369] R13: 0000000051eb851f R14: 00007ffdba3c85f0 R15: 0000557a49220d90
So fix this by making btrfs_truncate_inode_items() not lock the range in
the inode's iotree when the target root is a log root, since it's not
needed to lock the range for log roots as the protection from the inode's
lock and log_mutex are all that's needed.
Fixes: 28553fa992cb28 ("Btrfs: fix race between shrinking truncate and fiemap")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
kmemleak reports a memory leak with the ana_log_buf allocated by
nvme_mpath_init():
unreferenced object 0xffff888120e94000 (size 8208):
comm "nvme", pid 6884, jiffies 4295020435 (age 78786.312s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000e2360188>] kmalloc_order+0x97/0xc0
[<0000000079b18dd4>] kmalloc_order_trace+0x24/0x100
[<00000000f50c0406>] __kmalloc+0x24c/0x2d0
[<00000000f31a10b9>] nvme_mpath_init+0x23c/0x2b0
[<000000005802589e>] nvme_init_identify+0x75f/0x1600
[<0000000058ef911b>] nvme_loop_configure_admin_queue+0x26d/0x280
[<00000000673774b9>] nvme_loop_create_ctrl+0x2a7/0x710
[<00000000f1c7a233>] nvmf_dev_write+0xc66/0x10b9
[<000000004199f8d0>] __vfs_write+0x50/0xa0
[<0000000065466fef>] vfs_write+0xf3/0x280
[<00000000b0db9a8b>] ksys_write+0xc6/0x160
[<0000000082156b91>] __x64_sys_write+0x43/0x50
[<00000000c34fbb6d>] do_syscall_64+0x77/0x2f0
[<00000000bbc574c9>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
nvme_mpath_init() is called by nvme_init_identify() which is called in
multiple places (nvme_reset_work(), nvme_passthru_end(), etc). This
means nvme_mpath_init() may be called multiple times before
nvme_mpath_uninit() (which is only called on nvme_free_ctrl()).
When nvme_mpath_init() is called multiple times, it overwrites the
ana_log_buf pointer with a new allocation, thus leaking the previous
allocation.
To fix this, free ana_log_buf before allocating a new one.
Fixes: 0d0b660f214dc490 ("nvme: add ANA support")
Cc: <stable@vger.kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This was noticed when printing debugfs for MSIs on my ARM64 server. The
new dstate IRQD_MSI_NOMASK_QUIRK came out surprisingly while it should only
be the x86 stuff for the time being...
The new MSI quirk flag uses the same bit as IRQ_DOMAIN_NAME_ALLOCATED which
is oddly defined as bit 6 for no good reason.
Switch it to the non used bit 1.
Fixes: 6f1a4891a592 ("x86/apic/msi: Plug non-maskable MSI affinity race")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200221020725.2038-1-yuzenghui@huawei.com
|
|
Fix typos, spellos, etc. in zonefs.txt.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Damien Le Moal <Damien.LeMoal@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
|
|
This is required for clone3 which passes the TLS value through a
struct rather than a register.
Cc: Amanieu d'Antras <amanieu@gmail.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
|
|
Add the pci related code for csky arch to support basic pci virtual
function, such as qemu virt-pci-9pfs.
Signed-off-by: MaJun <majun258@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
|
|
Some bsp (eg: buildroot) has defconfig.fragment design to add more
configs into the defconfig in linux source code tree. For example,
we could put different cpu configs into different defconfig.fragments,
but they all use the same defconfig in Linux.
Signed-off-by: Ma Jun <majun258@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
|
|
We should give some necessary check for initrd just like other
architectures and it seems that setup_initrd() could be a common
code for all architectures.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
|
|
CONFIG_CLKSRC_OF is gone since commit bb0eb050a577
("clocksource/drivers: Rename CLKSRC_OF to TIMER_OF"). The platform
already selects TIMER_OF.
CONFIG_HAVE_DMA_API_DEBUG is gone since commit 6e88628d03dd ("dma-debug:
remove CONFIG_HAVE_DMA_API_DEBUG").
CONFIG_DEFAULT_DEADLINE is gone since commit f382fb0bcef4 ("block:
remove legacy IO schedulers").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
|
|
Fix wording in help text for the CPU_HAS_LDSTEX symbol.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
|
Shin'ichiro Kawasaki
Ming Lei
Stefan Haberland
Prabhath Sajeepa
Tejun Heo
Carlo Nonato
Cengiz Can
Jens Axboe
Daniel Wagner
Bijan Mottahedeh
John Garry
Dongli Zhang
Jan Kara
Linus Torvalds
Geert Uytterhoeven
Xiaoguang Wang
wangyan
Eric Biggers
Suraj Jitindar Singh
Randy Dunlap
Alexander Potapenko
Wei Yang
Gavin Shan
Alexandru Ardelean
Vasily Averin
Christoph Hellwig
Douglas Anderson
Joe Perches
SeongJae Park
Christian Borntraeger
Ioanna Alifieraki
Arnd Bergmann
Rafael J. Wysocki
Guenter Roeck
Stefano Garzarella
Filipe Manana
Logan Gunthorpe
Zenghui Yu
Guo Ren
MaJun
Krzysztof Kozlowski