aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/bcma/sprom.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2012-04-16bcma: use fallback sprom if no on chip sprom is availableHauke Mehrtens1-2/+5
bcma should check for a fallback sprom every time it can not find a sprom on the card itself or a normal external sprom mapped into the memory of the chip. When otp sprom support was introduced it tried to read out the sprom from the wireless chip also if no otp sprom was available. This caused a Data bus error in bcma_sprom_get() when reading out the sprom for the SoC. This fixes a regression introduced in commit: commit 10d8493cd9efd38b1947b7a74276dbdc8311aa1a Author: Arend van Spriel <arend@broadcom.com> Date: Tue Mar 6 15:50:48 2012 +0100 bcma: add support for on-chip OTP memory used for SPROM storage This patch was tested on a Netgear WNDR3400 (Broadcom BCM4718 SoC). Reported-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06bcma: add support for on-chip OTP memory used for SPROM storageArend van Spriel1-20/+106
Wireless Broadcom chips can have either their SPROM data stored on either external SPROM or on-chip OTP memory. Both are accessed through the same register space. This patch adds support for the on-chip OTP memory. Tested with: BCM43224 OTP and SPROM BCM4331 SPROM BCM4313 OTP This patch is in response to linux-wireless thread [1]. [1] http://article.gmane.org/gmane.linux.kernel.wireless.general/85426 Tested-by: Saul St. John <saul.stjohn@gmail.com> Tested-by: Rafal Milecki <zajec5@gmail.com> Tested-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06bcma: return error in bcma_sprom_get() when fallback failsArend van Spriel1-10/+17
When not SPROM is available a fallback mechanism is used. However, when that fails the code currently continues. This patch assures that the bcma_sprom_get() function aborts when that happens. Cc: Rafal Milecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05bcma: add support for sprom not found on the deviceHauke Mehrtens1-8/+69
On SoCs the sprom is stored in the nvram in a special partition on the flash chip. The nvram contains the sprom for the main bus, but sometimes also for a pci devices using bcma. This patch makes it possible for the arch code to register a function to fetch the needed sprom from the nvram and provide it to the bcma code. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06bcma: add extra sprom checkHauke Mehrtens1-0/+7
This check is needed on the BCM43224 device as it says in the capabilities it has an sprom but is extra check says it has not. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24bcma: Enable logging of SPROM offsetLarry Finger1-0/+1
The SPROM location has been relocated again for some devices. This patch will log the offset when CONFIG_BCMA_DEBUG has been selected. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24bcma: SPROM: extract power info for coresRafał Miłecki1-1/+39
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24bcma: SPROM: add macro for easier extractionRafał Miłecki1-68/+71
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13bcma: extract revision and TX power IDs from SPROMRafał Miłecki1-0/+39
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13bcma: extract FEM info from SPROMRafał Miłecki1-0/+22
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13bcma: extract some basic info about board from SPROMRafał Miłecki1-0/+9
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22bcma: implement BCM4331 workaround for external PA linesRafał Miłecki1-0/+6
We need to disable ext. PA lines for reading SPROM. It's disabled by default, but this patch allows using bcma after loading wl, which leaves workaround enabled. Cc: Arend van Spriel <arend@broadcom.com> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19bcma: handle alternative SPROM locationRafał Miłecki1-3/+9
Some cards do not use additional 0x30 offset for SPROM location. We do not know the real condition for it yet, make it BCM4331 specific for now. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-18bcma: extract SPROM rev 9 the same way as rev 8Rafał Miłecki1-1/+1
SPROM rev 9 was discovered on 14e4:4331, it seems to have very similar layout to rev 8 one. Use the same extracting function until we find some differences. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11bcma: add check if sprom is available before accessing it.Hauke Mehrtens1-0/+3
The SoCs like the bcm4716 do not have a sprom on the bcma bus like a pcie device. It stores the values in some partition on flash memory. For ssb this informations are read out in the bcm47xx arch code, something like that should also be implemented for bcma. Without this patch bcma panics on SoCs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-03bcma: read SPROM and extract MAC from itRafał Miłecki1-0/+162
In case of BCMA cards SPROM is located in the ChipCommon core, it is not mapped as separated host window. So far we have met only SPROMs rev 8. SPROM layout seems to be the same as for SSB buses, so we decided to share SPROM struct and some defines. For now we extract MAC address only, this can be improved of course. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.