aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/block (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-02-12floppy: check_events callback should not return a negative numberYufen Yu1-1/+1
floppy_check_events() is supposed to return bit flags to say which events occured. We should return zero to say that no event flags are set. Only BIT(0) and BIT(1) are used in the caller. And .check_events interface also expect to return an unsigned int value. However, after commit a0c80efe5956, it may return -EINTR (-4u). Here, both BIT(0) and BIT(1) are cleared. So this patch shouldn't affect runtime, but it obviously is still worth fixing. Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: a0c80efe5956 ("floppy: fix lock_fdc() signal handling") Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-20Merge tag 'for-linus-20190118' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+3
Pull block fixes from Jens Axboe: - block size setting fixes for loop/nbd (Jan Kara) - md bio_alloc_mddev() cleanup (Marcos) - Ensure we don't lose the REQ_INTEGRITY flag (Ming) - Two NVMe fixes by way of Christoph: - Fix NVMe IRQ calculation (Ming) - Uninitialized variable in nvmet-tcp (Sagi) - BFQ comment fix (Paolo) - License cleanup for recently added blk-mq-debugfs-zoned (Thomas) * tag 'for-linus-20190118' of git://git.kernel.dk/linux-block: block: Cleanup license notice nvme-pci: fix nvme_setup_irqs() nvmet-tcp: fix uninitialized variable access block: don't lose track of REQ_INTEGRITY flag blockdev: Fix livelocks on loop device nbd: Use set_blocksize() to set device blocksize md: Make bio_alloc_mddev use bio_alloc_bioset block, bfq: fix comments on __bfq_deactivate_entity
2019-01-15nbd: Use set_blocksize() to set device blocksizeJan Kara1-2/+3
NBD can update block device block size implicitely through bd_set_size(). Make it explicitely set blocksize with set_blocksize() as this behavior of bd_set_size() is going away. CC: Josef Bacik <jbacik@fb.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-12Merge tag 'for-linus-20190112' of git://git.kernel.dk/linux-blockLinus Torvalds2-2/+34
Pull block fixes from Jens Axboe: - NVMe pull request from Christoph, with little fixes all over the map - Loop caching fix for offset/bs change (Jaegeuk Kim) - Block documentation tweaks (Jeff, Jon, Weiping, John) - null_blk zoned tweak (John) - ahch mvebu suspend/resume support. Should have gone into the merge window, but there was some confusion on which tree had it. (Miquel) * tag 'for-linus-20190112' of git://git.kernel.dk/linux-block: (22 commits) ata: ahci: mvebu: request PHY suspend/resume for Armada 3700 ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAM ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs ata: ahci: mvebu: remove stale comment ata: libahci_platform: comply to PHY framework loop: drop caches if offset or block_size are changed block: fix kerneldoc comment for blk_attempt_plug_merge() nvme: don't initlialize ctrl->cntlid twice nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN nvme: pad fake subsys NQN vid and ssvid with zeros nvme-multipath: zero out ANA log buffer nvme-fabrics: unset write/poll queues for discovery controllers nvme-tcp: don't ask if controller is fabrics nvme-tcp: remove dead code nvme-pci: fix out of bounds access in nvme_cqe_pending nvme-pci: rerun irq setup on IO queue init errors nvme-pci: use the same attributes when freeing host_mem_desc_bufs. nvme-pci: fix the wrong setting of nr_maps block: doc: add slice_idle_us to bfq documentation block: clarify documentation for blk_{start|finish}_plug ...
2019-01-12Merge tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-2/+2
Pull dma_zalloc_coherent() removal from Christoph Hellwig: "We've always had a weird situation around dma_zalloc_coherent. To safely support mapping the allocations to userspace major architectures like x86 and arm have always zeroed allocations from dma_alloc_coherent, but a couple other architectures were missing that zeroing either always or in corner cases. Then later we grew anothe dma_zalloc_coherent interface to explicitly request zeroing, but that just added __GFP_ZERO to the allocation flags, which for some allocators that didn't end up using the page allocator ended up being a no-op and still not zeroing the allocations. So for this merge window I fixed up all remaining architectures to zero the memory in dma_alloc_coherent, and made dma_zalloc_coherent a no-op wrapper around dma_alloc_coherent, which fixes all of the above issues. dma_zalloc_coherent is now pointless and can go away, and Luis helped me writing a cocchinelle script and patch series to kill it, which I think we should apply now just after -rc1 to finally settle these issue" * tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: remove dma_zalloc_coherent() cross-tree: phase out dma_zalloc_coherent() on headers cross-tree: phase out dma_zalloc_coherent()
2019-01-11Merge tag 'ceph-for-5.0-rc2' of git://github.com/ceph/ceph-clientLinus Torvalds1-5/+4
Pull ceph updates from Ilya Dryomov: "A patch to allow setting abort_on_full and a fix for an old "rbd unmap" edge case, marked for stable" * tag 'ceph-for-5.0-rc2' of git://github.com/ceph/ceph-client: rbd: don't return 0 on unmap if RBD_DEV_FLAG_REMOVING is set ceph: use vmf_error() in ceph_filemap_fault() libceph: allow setting abort_on_full for rbd
2019-01-10rbd: don't return 0 on unmap if RBD_DEV_FLAG_REMOVING is setIlya Dryomov1-5/+4
There is a window between when RBD_DEV_FLAG_REMOVING is set and when the device is removed from rbd_dev_list. During this window, we set "already" and return 0. Returning 0 from write(2) can confuse userspace tools because 0 indicates that nothing was written. In particular, "rbd unmap" will retry the write multiple times a second: 10:28:05.463299 write(4, "0", 1) = 0 10:28:05.463509 write(4, "0", 1) = 0 10:28:05.463720 write(4, "0", 1) = 0 10:28:05.463942 write(4, "0", 1) = 0 10:28:05.464155 write(4, "0", 1) = 0 Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Tested-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2019-01-09loop: drop caches if offset or block_size are changedJaegeuk Kim1-2/+33
If we don't drop caches used in old offset or block_size, we can get old data from new offset/block_size, which gives unexpected data to user. For example, Martijn found a loopback bug in the below scenario. 1) LOOP_SET_FD loads first two pages on loop file 2) LOOP_SET_STATUS64 changes the offset on the loop file 3) mount is failed due to the cached pages having wrong superblock Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Reported-by: Martijn Coenen <maco@google.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08zram: idle writeback fixes and cleanupMinchan Kim2-26/+69
This patch includes some fixes and cleanup for idle-page writeback. 1. writeback_limit interface Now writeback_limit interface is rather conusing. For example, once writeback limit budget is exausted, admin can see 0 from /sys/block/zramX/writeback_limit which is same semantic with disable writeback_limit at this moment. IOW, admin cannot tell that zero came from disable writeback limit or exausted writeback limit. To make the interface clear, let's sepatate enable of writeback limit to another knob - /sys/block/zram0/writeback_limit_enable * before: while true : # to re-enable writeback limit once previous one is used up echo 0 > /sys/block/zram0/writeback_limit echo $((200<<20)) > /sys/block/zram0/writeback_limit .. .. # used up the writeback limit budget * new # To enable writeback limit, from the beginning, admin should # enable it. echo $((200<<20)) > /sys/block/zram0/writeback_limit echo 1 > /sys/block/zram/0/writeback_limit_enable while true : echo $((200<<20)) > /sys/block/zram0/writeback_limit .. .. # used up the writeback limit budget It's much strightforward. 2. fix condition check idle/huge writeback mode check The mode in writeback_store is not bit opeartion any more so no need to use bit operations. Furthermore, current condition check is broken in that it does writeback every pages regardless of huge/idle. 3. clean up idle_store No need to use goto. [minchan@kernel.org: missed spin_lock_init] Link: http://lkml.kernel.org/r/20190103001601.GA255139@google.com Link: http://lkml.kernel.org/r/20181224033529.19450-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Suggested-by: John Dias <joaodias@google.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: John Dias <joaodias@google.com> Cc: Srinivas Paladugu <srnvs@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain1-2/+2
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-06null_blk: add zoned config support informationJohn Pittman1-0/+1
If the kernel is built without CONFIG_BLK_DEV_ZONED, a modprobe of the null_blk driver with zoned=1 fails with 'Invalid argument'. This can be confusing to users, prompting a search as to why the parameter is invalid. To assist in that search, add a bit more information to the failure, additionally adding to the documentation that CONFIG_BLK_DEV_ZONED is needed for zoned=1. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: John Pittman <jpittman@redhat.com> Added null_blk prefix to error message. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-03block: sunvdc: don't run hw queue synchronously from irq contextMing Lei1-1/+1
vdc_blk_queue_start() may be called from irq context, so we can't run queue via blk_mq_start_hw_queues() since we never allow to run queue from irq context. Use blk_mq_start_stopped_hw_queues(q, true) to fix this issue. Fixes: fa182a1fa97dff56cd ("sunvdc: convert to blk-mq") Reported-by: Anatoly Pugachev <matorola@gmail.com> Tested-by: Anatoly Pugachev <matorola@gmail.com> Cc: Anatoly Pugachev <matorola@gmail.com> Cc: sparclinux@vger.kernel.org Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-02Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-2/+81
Pull virtio/vhost updates from Michael Tsirkin: "Features, fixes, cleanups: - discard in virtio blk - misc fixes and cleanups" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: correct the related warning message vhost: split structs into a separate header file virtio: remove deprecated VIRTIO_PCI_CONFIG() vhost/vsock: switch to a mutex for vhost_vsock_hash virtio_blk: add discard and write zeroes support
2019-01-02Merge tag 'for-4.21/block-20190102' of git://git.kernel.dk/linux-blockLinus Torvalds15-100/+437
Pull more block updates from Jens Axboe: - Dead code removal for loop/sunvdc (Chengguang) - Mark BIDI support for bsg as deprecated, logging a single dmesg warning if anyone is actually using it (Christoph) - blkcg cleanup, killing a dead function and making the tryget_closest variant easier to read (Dennis) - Floppy fixes, one fixing a regression in swim3 (Finn) - lightnvm use-after-free fix (Gustavo) - gdrom leak fix (Wenwen) - a set of drbd updates (Lars, Luc, Nathan, Roland) * tag 'for-4.21/block-20190102' of git://git.kernel.dk/linux-block: (28 commits) block/swim3: Fix regression on PowerBook G3 block/swim3: Fix -EBUSY error when re-opening device after unmount block/swim3: Remove dead return statement block/amiflop: Don't log error message on invalid ioctl gdrom: fix a memory leak bug lightnvm: pblk: fix use-after-free bug block: sunvdc: remove redundant code block: loop: remove redundant code bsg: deprecate BIDI support in bsg blkcg: remove unused __blkg_release_rcu() blkcg: clean up blkg_tryget_closest() drbd: Change drbd_request_detach_interruptible's return type to int drbd: Avoid Clang warning about pointless switch statment drbd: introduce P_ZEROES (REQ_OP_WRITE_ZEROES on the "wire") drbd: skip spurious timeout (ping-timeo) when failing promote drbd: don't retry connection if peers do not agree on "authentication" settings drbd: fix print_st_err()'s prototype to match the definition drbd: avoid spurious self-outdating with concurrent disconnect / down drbd: do not block when adjusting "disk-options" while IO is frozen drbd: fix comment typos ...
2018-12-31block/swim3: Fix regression on PowerBook G3Finn Thain1-4/+3
As of v4.20, the swim3 driver crashes when loaded on a PowerBook G3 (Wallstreet). MacIO PCI driver attached to Gatwick chipset MacIO PCI driver attached to Heathrow chipset swim3 0.00015000:floppy: [fd0] SWIM3 floppy controller in media bay 0.00013020:ch-a: ttyS0 at MMIO 0xf3013020 (irq = 16, base_baud = 230400) is a Z85c30 ESCC - Serial port 0.00013000:ch-b: ttyS1 at MMIO 0xf3013000 (irq = 17, base_baud = 230400) is a Z85c30 ESCC - Infrared port macio: fixed media-bay irq on gatwick macio: fixed left floppy irqs swim3 1.00015000:floppy: [fd1] Couldn't request interrupt Unable to handle kernel paging request for data at address 0x00000024 Faulting instruction address: 0xc02652f8 Oops: Kernel access of bad area, sig: 11 [#1] BE SMP NR_CPUS=2 PowerMac Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.20.0 #2 NIP: c02652f8 LR: c026915c CTR: c0276d1c REGS: df43ba10 TRAP: 0300 Not tainted (4.20.0) MSR: 00009032 <EE,ME,IR,DR,RI> CR: 28228288 XER: 00000100 DAR: 00000024 DSISR: 40000000 GPR00: c026915c df43bac0 df439060 c0731524 df494700 00000000 c06e1c08 00000001 GPR08: 00000001 00000000 df5ff220 00001032 28228282 00000000 c0004ca4 00000000 GPR16: 00000000 00000000 00000000 c073144c dfffe064 c0731524 00000120 c0586108 GPR24: c073132c c073143c c073143c 00000000 c0731524 df67cd70 df494700 00000001 NIP [c02652f8] blk_mq_free_rqs+0x28/0xf8 LR [c026915c] blk_mq_sched_tags_teardown+0x58/0x84 Call Trace: [df43bac0] [c0045f50] flush_workqueue_prep_pwqs+0x178/0x1c4 (unreliable) [df43bae0] [c026915c] blk_mq_sched_tags_teardown+0x58/0x84 [df43bb00] [c02697f0] blk_mq_exit_sched+0x9c/0xb8 [df43bb20] [c0252794] elevator_exit+0x84/0xa4 [df43bb40] [c0256538] blk_exit_queue+0x30/0x50 [df43bb50] [c0256640] blk_cleanup_queue+0xe8/0x184 [df43bb70] [c034732c] swim3_attach+0x330/0x5f0 [df43bbb0] [c034fb24] macio_device_probe+0x58/0xec [df43bbd0] [c032ba88] really_probe+0x1e4/0x2f4 [df43bc00] [c032bd28] driver_probe_device+0x64/0x204 [df43bc20] [c0329ac4] bus_for_each_drv+0x60/0xac [df43bc50] [c032b824] __device_attach+0xe8/0x160 [df43bc80] [c032ab38] bus_probe_device+0xa0/0xbc [df43bca0] [c0327338] device_add+0x3d8/0x630 [df43bcf0] [c0350848] macio_add_one_device+0x444/0x48c [df43bd50] [c03509f8] macio_pci_add_devices+0x168/0x1bc [df43bd90] [c03500ec] macio_pci_probe+0xc0/0x10c [df43bda0] [c02ad884] pci_device_probe+0xd4/0x184 [df43bdd0] [c032ba88] really_probe+0x1e4/0x2f4 [df43be00] [c032bd28] driver_probe_device+0x64/0x204 [df43be20] [c032bfcc] __driver_attach+0x104/0x108 [df43be40] [c0329a00] bus_for_each_dev+0x64/0xb4 [df43be70] [c032add8] bus_add_driver+0x154/0x238 [df43be90] [c032ca24] driver_register+0x84/0x148 [df43bea0] [c0004aa0] do_one_initcall+0x40/0x188 [df43bf00] [c0690100] kernel_init_freeable+0x138/0x1d4 [df43bf30] [c0004cbc] kernel_init+0x18/0x10c [df43bf40] [c00121e4] ret_from_kernel_thread+0x14/0x1c Instruction dump: 5484d97e 4bfff4f4 9421ffe0 7c0802a6 bf410008 7c9e2378 90010024 8124005c 2f890000 419e0078 81230004 7c7c1b78 <81290024> 2f890000 419e0064 81440000 ---[ end trace 12025ab921a9784c ]--- Reverting commit 8ccb8cb1892b ("swim3: convert to blk-mq") resolves the problem. That commit added a struct blk_mq_tag_set to struct floppy_state and initialized it with a blk_mq_init_sq_queue() call. Unfortunately, there is a memset() in swim3_add_device() that subsequently clears the floppy_state struct. That means fs->tag_set->ops is a NULL pointer, and it gets dereferenced by blk_mq_free_rqs() which gets called in the request_irq() error path. Move the memset() to fix this bug. BTW, the request_irq() failure for the left mediabay floppy (fd1) is not a regression. I don't know why it happens. The right media bay floppy (fd0) works fine however. Reported-and-tested-by: Stan Johnson <userm57@yahoo.com> Fixes: 8ccb8cb1892b ("swim3: convert to blk-mq") Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-31block/swim3: Fix -EBUSY error when re-opening device after unmountFinn Thain1-1/+5
When the block device is opened with FMODE_EXCL, ref_count is set to -1. This value doesn't get reset when the device is closed which means the device cannot be opened again. Fix this by checking for refcount <= 0 in the release method. Reported-and-tested-by: Stan Johnson <userm57@yahoo.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-31block/swim3: Remove dead return statementFinn Thain1-1/+0
Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-31block/amiflop: Don't log error message on invalid ioctlFinn Thain1-2/+0
Cc: linux-m68k@lists.linux-m68k.org Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-28Merge branch 'akpm' (patches from Andrew)Linus Torvalds3-154/+372
Merge misc updates from Andrew Morton: - large KASAN update to use arm's "software tag-based mode" - a few misc things - sh updates - ocfs2 updates - just about all of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (167 commits) kernel/fork.c: mark 'stack_vm_area' with __maybe_unused memcg, oom: notify on oom killer invocation from the charge path mm, swap: fix swapoff with KSM pages include/linux/gfp.h: fix typo mm/hmm: fix memremap.h, move dev_page_fault_t callback to hmm hugetlbfs: Use i_mmap_rwsem to fix page fault/truncate race hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization memory_hotplug: add missing newlines to debugging output mm: remove __hugepage_set_anon_rmap() include/linux/vmstat.h: remove unused page state adjustment macro mm/page_alloc.c: allow error injection mm: migrate: drop unused argument of migrate_page_move_mapping() blkdev: avoid migration stalls for blkdev pages mm: migrate: provide buffer_migrate_page_norefs() mm: migrate: move migrate_page_lock_buffers() mm: migrate: lock buffers before migrate_page_move_mapping() mm: migration: factor out code to compute expected number of page references mm, page_alloc: enable pcpu_drain with zone capability kmemleak: add config to select auto scan mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init ...
2018-12-28Merge tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-blockLinus Torvalds23-767/+709
Pull block updates from Jens Axboe: "This is the main pull request for block/storage for 4.21. Larger than usual, it was a busy round with lots of goodies queued up. Most notable is the removal of the old IO stack, which has been a long time coming. No new features for a while, everything coming in this week has all been fixes for things that were previously merged. This contains: - Use atomic counters instead of semaphores for mtip32xx (Arnd) - Cleanup of the mtip32xx request setup (Christoph) - Fix for circular locking dependency in loop (Jan, Tetsuo) - bcache (Coly, Guoju, Shenghui) * Optimizations for writeback caching * Various fixes and improvements - nvme (Chaitanya, Christoph, Sagi, Jay, me, Keith) * host and target support for NVMe over TCP * Error log page support * Support for separate read/write/poll queues * Much improved polling * discard OOM fallback * Tracepoint improvements - lightnvm (Hans, Hua, Igor, Matias, Javier) * Igor added packed metadata to pblk. Now drives without metadata per LBA can be used as well. * Fix from Geert on uninitialized value on chunk metadata reads. * Fixes from Hans and Javier to pblk recovery and write path. * Fix from Hua Su to fix a race condition in the pblk recovery code. * Scan optimization added to pblk recovery from Zhoujie. * Small geometry cleanup from me. - Conversion of the last few drivers that used the legacy path to blk-mq (me) - Removal of legacy IO path in SCSI (me, Christoph) - Removal of legacy IO stack and schedulers (me) - Support for much better polling, now without interrupts at all. blk-mq adds support for multiple queue maps, which enables us to have a map per type. This in turn enables nvme to have separate completion queues for polling, which can then be interrupt-less. Also means we're ready for async polled IO, which is hopefully coming in the next release. - Killing of (now) unused block exports (Christoph) - Unification of the blk-rq-qos and blk-wbt wait handling (Josef) - Support for zoned testing with null_blk (Masato) - sx8 conversion to per-host tag sets (Christoph) - IO priority improvements (Damien) - mq-deadline zoned fix (Damien) - Ref count blkcg series (Dennis) - Lots of blk-mq improvements and speedups (me) - sbitmap scalability improvements (me) - Make core inflight IO accounting per-cpu (Mikulas) - Export timeout setting in sysfs (Weiping) - Cleanup the direct issue path (Jianchao) - Export blk-wbt internals in block debugfs for easier debugging (Ming) - Lots of other fixes and improvements" * tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-block: (364 commits) kyber: use sbitmap add_wait_queue/list_del wait helpers sbitmap: add helpers for add/del wait queue handling block: save irq state in blkg_lookup_create() dm: don't reuse bio for flushes nvme-pci: trace SQ status on completions nvme-rdma: implement polling queue map nvme-fabrics: allow user to pass in nr_poll_queues nvme-fabrics: allow nvmf_connect_io_queue to poll nvme-core: optionally poll sync commands block: make request_to_qc_t public nvme-tcp: fix spelling mistake "attepmpt" -> "attempt" nvme-tcp: fix endianess annotations nvmet-tcp: fix endianess annotations nvme-pci: refactor nvme_poll_irqdisable to make sparse happy nvme-pci: only set nr_maps to 2 if poll queues are supported nvmet: use a macro for default error location nvmet: fix comparison of a u16 with -1 blk-mq: enable IO poll if .nr_queues of type poll > 0 blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight() blk-mq: skip zero-queue maps in blk_mq_map_swqueue ...
2018-12-28zram: writeback throttleMinchan Kim2-3/+51
If there are lots of write IO with flash device, it could have a wearout problem of storage. To overcome the problem, admin needs to design write limitation to guarantee flash health for entire product life. This patch creates a new knob "writeback_limit" for zram. writeback_limit's default value is 0 so that it doesn't limit any writeback. If admin want to measure writeback count in a certain period, he could know it via /sys/block/zram0/bd_stat's 3rd column. If admin want to limit writeback as per-day 400M, he could do it like below. MB_SHIFT=20 4K_SHIFT=12 echo $((400<<MB_SHIFT>>4K_SHIFT)) > \ /sys/block/zram0/writeback_limit. If admin want to allow further write again, he could do it like below echo 0 > /sys/block/zram0/writeback_limit If admin want to see remaining writeback budget, cat /sys/block/zram0/writeback_limit The writeback_limit count will reset whenever you reset zram (e.g., system reboot, echo 1 > /sys/block/zramX/reset) so keeping how many of writeback happened until you reset the zram to allocate extra writeback budget in next setting is user's job. [minchan@kernel.org: v4] Link: http://lkml.kernel.org/r/20181203024045.153534-8-minchan@kernel.org Link: http://lkml.kernel.org/r/20181127055429.251614-8-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joey Pabalinas <joeypabalinas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28zram: add bd_stat statisticsMinchan Kim2-0/+34
bd_stat represents things that happened in the backing device. Currently it supports bd_counts, bd_reads and bd_writes which are helpful to understand wearout of flash and memory saving. [minchan@kernel.org: v4] Link: http://lkml.kernel.org/r/20181203024045.153534-7-minchan@kernel.org Link: http://lkml.kernel.org/r/20181127055429.251614-7-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joey Pabalinas <joeypabalinas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28zram: support idle/huge page writebackMinchan Kim3-75/+178
Add a new feature "zram idle/huge page writeback". In the zram-swap use case, zram usually has many idle/huge swap pages. It's pointless to keep them in memory (ie, zram). To solve this problem, this feature introduces idle/huge page writeback to the backing device so the goal is to save more memory space on embedded systems. Normal sequence to use idle/huge page writeback feature is as follows, while (1) { # mark allocated zram slot to idle echo all > /sys/block/zram0/idle # leave system working for several hours # Unless there is no access for some blocks on zram, # they are still IDLE marked pages. echo "idle" > /sys/block/zram0/writeback or/and echo "huge" > /sys/block/zram0/writeback # write the IDLE or/and huge marked slot into backing device # and free the memory. } Per the discussion at https://lore.kernel.org/lkml/20181122065926.GG3441@jagdpanzerIV/T/#u, This patch removes direct incommpressibe page writeback feature (d2afd25114f4 ("zram: write incompressible pages to backing device")). Below concerns from Sergey: == &< == "IDLE writeback" is superior to "incompressible writeback". "incompressible writeback" is completely unpredictable and uncontrollable; it depens on data patterns and compression algorithms. While "IDLE writeback" is predictable. I even suspect, that, *ideally*, we can remove "incompressible writeback". "IDLE pages" is a super set which also includes "incompressible" pages. So, technically, we still can do "incompressible writeback" from "IDLE writeback" path; but a much more reasonable one, based on a page idling period. I understand that you want to keep "direct incompressible writeback" around. ZRAM is especially popular on devices which do suffer from flash wearout, so I can see "incompressible writeback" path becoming a dead code, long term. == &< == Below concerns from Minchan: == &< == My concern is if we enable CONFIG_ZRAM_WRITEBACK in this implementation, both hugepage/idlepage writeck will turn on. However someuser want to enable only idlepage writeback so we need to introduce turn on/off knob for hugepage or new CONFIG_ZRAM_IDLEPAGE_WRITEBACK for those usecase. I don't want to make it complicated *if possible*. Long term, I imagine we need to make VM aware of new swap hierarchy a little bit different with as-is. For example, first high priority swap can return -EIO or -ENOCOMP, swap try to fallback to next lower priority swap device. With that, hugepage writeback will work tranparently. So we could regard it as regression because incompressible pages doesn't go to backing storage automatically. Instead, user should do it via "echo huge" > /sys/block/zram/writeback" manually. == &< == Link: http://lkml.kernel.org/r/20181127055429.251614-6-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Joey Pabalinas <joeypabalinas@gmail.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28zram: introduce ZRAM_IDLE flagMinchan Kim2-3/+55
To support idle page writeback with upcoming patches, this patch introduces a new ZRAM_IDLE flag. Userspace can mark zram slots as "idle" via "echo all > /sys/block/zramX/idle" which marks every allocated zram slot as ZRAM_IDLE. User could see it by /sys/kernel/debug/zram/zram0/block_state. 300 75.033841 ...i 301 63.806904 s..i 302 63.806919 ..hi Once there is IO for the slot, the mark will be disappeared. 300 75.033841 ... 301 63.806904 s..i 302 63.806919 ..hi Therefore, 300th block is idle zpage. With this feature, user can how many zram has idle pages which are waste of memory. Link: http://lkml.kernel.org/r/20181127055429.251614-5-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Joey Pabalinas <joeypabalinas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28zram: refactor flags and writeback stuffMinchan Kim2-69/+44
Rename some variables and restructure some code for better readability in writeback and zs_free_page. Link: http://lkml.kernel.org/r/20181127055429.251614-4-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Joey Pabalinas <joeypabalinas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28zram: fix double free backing deviceMinchan Kim1-1/+3
If blkdev_get fails, we shouldn't do blkdev_put. Otherwise, kernel emits below log. This patch fixes it. WARNING: CPU: 0 PID: 1893 at fs/block_dev.c:1828 blkdev_put+0x105/0x120 Modules linked in: CPU: 0 PID: 1893 Comm: swapoff Not tainted 4.19.0+ #453 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 RIP: 0010:blkdev_put+0x105/0x120 Call Trace: __x64_sys_swapoff+0x46d/0x490 do_syscall_64+0x5a/0x190 entry_SYSCALL_64_after_hwframe+0x49/0xbe irq event stamp: 4466 hardirqs last enabled at (4465): __free_pages_ok+0x1e3/0x490 hardirqs last disabled at (4466): trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (3420): __do_softirq+0x333/0x446 softirqs last disabled at (3407): irq_exit+0xd1/0xe0 Link: http://lkml.kernel.org/r/20181127055429.251614-3-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Joey Pabalinas <joeypabalinas@gmail.com> Cc: <stable@vger.kernel.org> [4.14+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28zram: fix lockdep warning of free block handlingMinchan Kim2-18/+22
Patch series "zram idle page writeback", v3. Inherently, swap device has many idle pages which are rare touched since it was allocated. It is never problem if we use storage device as swap. However, it's just waste for zram-swap. This patchset supports zram idle page writeback feature. * Admin can define what is idle page "no access since X time ago" * Admin can define when zram should writeback them * Admin can define when zram should stop writeback to prevent wearout Details are in each patch's description. This patch (of 7): ================================ WARNING: inconsistent lock state 4.19.0+ #390 Not tainted -------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. zram_verify/2095 [HC0[0]:SC1[1]:HE1:SE0] takes: 00000000b1828693 (&(&zram->bitmap_lock)->rlock){+.?.}, at: put_entry_bdev+0x1e/0x50 {SOFTIRQ-ON-W} state was registered at: _raw_spin_lock+0x2c/0x40 zram_make_request+0x755/0xdc9 generic_make_request+0x373/0x6a0 submit_bio+0x6c/0x140 __swap_writepage+0x3a8/0x480 shrink_page_list+0x1102/0x1a60 shrink_inactive_list+0x21b/0x3f0 shrink_node_memcg.constprop.99+0x4f8/0x7e0 shrink_node+0x7d/0x2f0 do_try_to_free_pages+0xe0/0x300 try_to_free_pages+0x116/0x2b0 __alloc_pages_slowpath+0x3f4/0xf80 __alloc_pages_nodemask+0x2a2/0x2f0 __handle_mm_fault+0x42e/0xb50 handle_mm_fault+0x55/0xb0 __do_page_fault+0x235/0x4b0 page_fault+0x1e/0x30 irq event stamp: 228412 hardirqs last enabled at (228412): [<ffffffff98245846>] __slab_free+0x3e6/0x600 hardirqs last disabled at (228411): [<ffffffff98245625>] __slab_free+0x1c5/0x600 softirqs last enabled at (228396): [<ffffffff98e0031e>] __do_softirq+0x31e/0x427 softirqs last disabled at (228403): [<ffffffff98072051>] irq_exit+0xd1/0xe0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&zram->bitmap_lock)->rlock); <Interrupt> lock(&(&zram->bitmap_lock)->rlock); *** DEADLOCK *** no locks held by zram_verify/2095. stack backtrace: CPU: 5 PID: 2095 Comm: zram_verify Not tainted 4.19.0+ #390 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: <IRQ> dump_stack+0x67/0x9b print_usage_bug+0x1bd/0x1d3 mark_lock+0x4aa/0x540 __lock_acquire+0x51d/0x1300 lock_acquire+0x90/0x180 _raw_spin_lock+0x2c/0x40 put_entry_bdev+0x1e/0x50 zram_free_page+0xf6/0x110 zram_slot_free_notify+0x42/0xa0 end_swap_bio_read+0x5b/0x170 blk_update_request+0x8f/0x340 scsi_end_request+0x2c/0x1e0 scsi_io_completion+0x98/0x650 blk_done_softirq+0x9e/0xd0 __do_softirq+0xcc/0x427 irq_exit+0xd1/0xe0 do_IRQ+0x93/0x120 common_interrupt+0xf/0xf </IRQ> With writeback feature, zram_slot_free_notify could be called in softirq context by end_swap_bio_read. However, bitmap_lock is not aware of that so lockdep yell out: get_entry_bdev spin_lock(bitmap->lock); irq softirq end_swap_bio_read zram_slot_free_notify zram_slot_lock <-- deadlock prone zram_free_page put_entry_bdev spin_lock(bitmap->lock); <-- deadlock prone With akpm's suggestion (i.e. bitmap operation is already atomic), we could remove bitmap lock. It might fail to find a empty slot if serious contention happens. However, it's not severe problem because huge page writeback has already possiblity to fail if there is severe memory pressure. Worst case is just keeping the incompressible in memory, not storage. The other problem is zram_slot_lock in zram_slot_slot_free_notify. To make it safe is this patch introduces zram_slot_trylock where zram_slot_free_notify uses it. Although it's rare to be contented, this patch adds new debug stat "miss_free" to keep monitoring how often it happens. Link: http://lkml.kernel.org/r/20181127055429.251614-2-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Joey Pabalinas <joeypabalinas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-27Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-1/+1
Pull crypto updates from Herbert Xu: "API: - Add 1472-byte test to tcrypt for IPsec - Reintroduced crypto stats interface with numerous changes - Support incremental algorithm dumps Algorithms: - Add xchacha12/20 - Add nhpoly1305 - Add adiantum - Add streebog hash - Mark cts(cbc(aes)) as FIPS allowed Drivers: - Improve performance of arm64/chacha20 - Improve performance of x86/chacha20 - Add NEON-accelerated nhpoly1305 - Add SSE2 accelerated nhpoly1305 - Add AVX2 accelerated nhpoly1305 - Add support for 192/256-bit keys in gcmaes AVX - Add SG support in gcmaes AVX - ESN for inline IPsec tx in chcr - Add support for CryptoCell 703 in ccree - Add support for CryptoCell 713 in ccree - Add SM4 support in ccree - Add SM3 support in ccree - Add support for chacha20 in caam/qi2 - Add support for chacha20 + poly1305 in caam/jr - Add support for chacha20 + poly1305 in caam/qi2 - Add AEAD cipher support in cavium/nitrox" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (130 commits) crypto: skcipher - remove remnants of internal IV generators crypto: cavium/nitrox - Fix build with !CONFIG_DEBUG_FS crypto: salsa20-generic - don't unnecessarily use atomic walk crypto: skcipher - add might_sleep() to skcipher_walk_virt() crypto: x86/chacha - avoid sleeping under kernel_fpu_begin() crypto: cavium/nitrox - Added AEAD cipher support crypto: mxc-scc - fix build warnings on ARM64 crypto: api - document missing stats member crypto: user - remove unused dump functions crypto: chelsio - Fix wrong error counter increments crypto: chelsio - Reset counters on cxgb4 Detach crypto: chelsio - Handle PCI shutdown event crypto: chelsio - cleanup:send addr as value in function argument crypto: chelsio - Use same value for both channel in single WR crypto: chelsio - Swap location of AAD and IV sent in WR crypto: chelsio - remove set but not used variable 'kctx_len' crypto: ux500 - Use proper enum in hash_set_dma_transfer crypto: ux500 - Use proper enum in cryp_set_dma_transfer crypto: aesni - Add scatter/gather avx stubs, and use them in C crypto: aesni - Introduce partial block macro ..
2018-12-22block: sunvdc: remove redundant codeChengguang Xu1-1/+0
Code cleanup for removing redundant break in switch case. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-22block: loop: remove redundant codeChengguang Xu1-1/+0
Code cleanup for removing redundant break in switch case. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20drbd: Change drbd_request_detach_interruptible's return type to intNathan Chancellor2-6/+3
Clang warns when an implicit conversion is done between enumerated types: drivers/block/drbd/drbd_state.c:708:8: warning: implicit conversion from enumeration type 'enum drbd_ret_code' to different enumeration type 'enum drbd_state_rv' [-Wenum-conversion] rv = ERR_INTR; ~ ^~~~~~~~ drbd_request_detach_interruptible's only call site is in the return statement of adm_detach, which returns an int. Change the return type of drbd_request_detach_interruptible to match, silencing Clang's warning. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20drbd: introduce P_ZEROES (REQ_OP_WRITE_ZEROES on the "wire")Lars Ellenberg9-30/+251
And also re-enable partial-zero-out + discard aligned. With the introduction of REQ_OP_WRITE_ZEROES, we started to use that for both WRITE_ZEROES and DISCARDS, hoping that WRITE_ZEROES would "do what we want", UNMAP if possible, zero-out the rest. The example scenario is some LVM "thin" backend. While an un-allocated block on dm-thin reads as zeroes, on a dm-thin with "skip_block_zeroing=true", after a partial block write allocated that block, that same block may well map "undefined old garbage" from the backends on LBAs that have not yet been written to. If we cannot distinguish between zero-out and discard on the receiving side, to avoid "undefined old garbage" to pop up randomly at later times on supposedly zero-initialized blocks, we'd need to map all discards to zero-out on the receiving side. But that would potentially do a full alloc on thinly provisioned backends, even when the expectation was to unmap/trim/discard/de-allocate. We need to distinguish on the protocol level, whether we need to guarantee zeroes (and thus use zero-out, potentially doing the mentioned full-alloc), or if we want to put the emphasis on discard, and only do a "best effort zeroing" (by "discarding" blocks aligned to discard-granularity, and zeroing only potential unaligned head and tail clippings to at least *try* to avoid "false positives" in an online-verify later), hoping that someone set skip_block_zeroing=false. For some discussion regarding this on dm-devel, see also https://www.mail-archive.com/dm-devel%40redhat.com/msg07965.html https://www.redhat.com/archives/dm-devel/2018-January/msg00271.html For backward compatibility, P_TRIM means zero-out, unless the DRBD_FF_WZEROES feature flag is agreed upon during handshake. To have upper layers even try to submit WRITE ZEROES requests, we need to announce "efficient zeroout" independently. We need to fixup max_write_zeroes_sectors after blk_queue_stack_limits(): if we can handle "zeroes" efficiently on the protocol, we want to do that, even if our backend does not announce max_write_zeroes_sectors itself. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20drbd: skip spurious timeout (ping-timeo) when failing promoteLars Ellenberg1-7/+8
If you try to promote a Secondary while connected to a Primary and allow-two-primaries is NOT set, we will wait for "ping-timeout" to give this node a chance to detect a dead primary, in case the cluster manager noticed faster than we did. But if we then are *still* connected to a Primary, we fail (after an additional timeout of ping-timout). This change skips the spurious second timeout. Most people won't notice really, since "ping-timeout" by default is half a second. But in some installations, ping-timeout may be 10 or 20 seconds or more, and spuriously delaying the error return becomes annoying. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20drbd: don't retry connection if peers do not agree on "authentication" settingsLars Ellenberg1-1/+1
emma: "Unexpected data packet AuthChallenge (0x0010)" ava: "expected AuthChallenge packet, received: ReportProtocol (0x000b)" "Authentication of peer failed, trying again." Pattern repeats. There is no point in retrying the handshake, if we expect to receive an AuthChallenge, but the peer is not even configured to expect or use a shared secret. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20drbd: fix print_st_err()'s prototype to match the definitionLuc Van Oostenryck1-1/+1
print_st_err() is defined with its 4th argument taking an 'enum drbd_state_rv' but its prototype use an int for it. Fix this by using 'enum drbd_state_rv' in the prototype too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Roland Kammerer <roland.kammerer@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20drbd: avoid spurious self-outdating with concurrent disconnect / downLars Ellenberg1-0/+7
If peers are "simultaneously" told to disconnect from each other, either explicitly, or implicitly by taking down the resource, with bad timing, one side may see its disconnect "fail" with a result of "state change failed by peer", and interpret this as "please oudate yourself". Try to catch this by checking for current connection status, and possibly retry as local-only state change instead. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20drbd: do not block when adjusting "disk-options" while IO is frozenLars Ellenberg1-8/+29
"suspending" IO is overloaded. It can mean "do not allow new requests" (obviously), but it also may mean "must not complete pending IO", for example while the fencing handlers do their arbitration. When adjusting disk options, we suspend io (disallow new requests), then wait for the activity-log to become unused (drain all IO completions), and possibly replace it with a new activity log of different size. If the other "suspend IO" aspect is active, pending IO completions won't happen, and we would block forever (unkillable drbdsetup process). Fix this by skipping the activity log adjustment if the "al-extents" setting did not change. Also, in case it did change, fail early without blocking if it looks like we would block forever. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20drbd: fix comment typosLars Ellenberg2-2/+2
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20drbd: reject attach of unsuitable uuids even if connectedLars Ellenberg2-3/+22
Multiple failure scenario: a) all good Connected Primary/Secondary UpToDate/UpToDate b) lose disk on Primary, Connected Primary/Secondary Diskless/UpToDate c) continue to write to the device, changes only make it to the Secondary storage. d) lose disk on Secondary, Connected Primary/Secondary Diskless/Diskless e) now try to re-attach on Primary This would have succeeded before, even though that is clearly the wrong data set to attach to (missing the modifications from c). Because we only compared our "effective" and the "to-be-attached" data generation uuid tags if (device->state.conn < C_CONNECTED). Fix: change that constraint to (device->state.pdsk != D_UP_TO_DATE) compare the uuids, and reject the attach. This patch also tries to improve the reverse scenario: first lose Secondary, then Primary disk, then try to attach the disk on Secondary. Before this patch, the attach on the Secondary succeeds, but since commit drbd: disconnect, if the wrong UUIDs are attached on a connected peer the Primary will notice unsuitable data, and drop the connection hard. Though unfortunately at a point in time during the handshake where we cannot easily abort the attach on the peer without more refactoring of the handshake. We now reject any attach to "unsuitable" uuids, as long as we can see a Primary role, unless we already have access to "good" data. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20drbd: attach on connected diskless peer must not shrink a consistent deviceLars Ellenberg1-5/+6
If we would reject a new handshake, if the peer had attached first, and then connected, we should force disconnect if the peer first connects, and only then attaches. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20drbd: fix confusing error message during attachLars Ellenberg1-5/+44
If we attach a (consistent) backing device, which knows about a last-agreed effective size, and that effective size is *larger* than the currently requested size, we refused to attach with ERR_DISK_TOO_SMALL Failure: (111) Low.dev. smaller than requested DRBD-dev. size. which is confusing to say the least. This patch changes the error code in that case to ERR_IMPLICIT_SHRINK Failure: (170) Implicit device shrinking not allowed. See kernel log. additional info from kernel: To-be-attached device has last effective > current size, and is consistent (9999 > 7777 sectors). Refusing to attach. It also allows to attach with an explicit size. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20drbd: disconnect, if the wrong UUIDs are attached on a connected peerLars Ellenberg1-1/+1
With "on-no-data-accessible suspend-io", DRBD requires the next attach or connect to be to the very same data generation uuid tag it lost last. If we first lost connection to the peer, then later lost connection to our own disk, we would usually refuse to re-connect to the peer, because it presents the wrong data set. However, if the peer first connects without a disk, and then attached its disk, we accepted that same wrong data set, which would be "unexpected" by any user of that DRBD and cause "undefined results" (read: very likely data corruption). The fix is to forcefully disconnect as soon as we notice that the peer attached to the "wrong" dataset. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20drbd: ignore "all zero" peer volume sizes in handshakeLars Ellenberg1-3/+30
During handshake, if we are diskless ourselves, we used to accept any size presented by the peer. Which could be zero if that peer was just brought up and connected to us without having a disk attached first, in which case both peers would just "flip" their volume sizes. Now, even a diskless node will ignore "zero" sizes presented by a diskless peer. Also a currently Diskless Primary will refuse to shrink during handshake: it may be frozen, and waiting for a "suitable" local disk or peer to re-appear (on-no-data-accessible suspend-io). If the peer is smaller than what we used to be, it is not suitable. The logic for a diskless node during handshake is now supposed to be: believe the peer, if - I don't have a current size myself - we agree on the size anyways - I do have a current size, am Secondary, and he has the only disk - I do have a current size, am Primary, and he has the only disk, which is larger than my current size Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20drbd: centralize printk reporting of new size into drbd_set_my_capacity()Lars Ellenberg3-11/+17
Previously, some implicit resizes that happend during handshake have not been reported as prominently as explicit resize. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20drbd: must not use connection after kref_put(&connection->kref)Lars Ellenberg1-2/+1
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20drbd: narrow rcu_read_lock in drbd_sync_handshakeRoland Kammerer1-5/+6
So far there was the possibility that we called genlmsg_new(GFP_NOIO)/mutex_lock() while holding an rcu_read_lock(). This included cases like: drbd_sync_handshake (acquire the RCU lock) drbd_asb_recover_1p drbd_khelper drbd_bcast_event genlmsg_new(GFP_NOIO) --> may sleep drbd_sync_handshake (acquire the RCU lock) drbd_asb_recover_1p drbd_khelper notify_helper genlmsg_new(GFP_NOIO) --> may sleep drbd_sync_handshake (acquire the RCU lock) drbd_asb_recover_1p drbd_khelper notify_helper mutex_lock --> may sleep While using GFP_ATOMIC whould have been possible in the first two cases, the real fix is to narrow the rcu_read_lock. Reported-by: Jia-Ju Bai <baijiaju1990@163.com> Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Roland Kammerer <roland.kammerer@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-19virtio_blk: add discard and write zeroes supportChangpeng Liu1-2/+81
In commit 88c85538, "virtio-blk: add discard and write zeroes features to specification" (https://github.com/oasis-tcs/virtio-spec), the virtio block specification has been extended to add VIRTIO_BLK_T_DISCARD and VIRTIO_BLK_T_WRITE_ZEROES commands. This patch enables support for discard and write zeroes in the virtio-blk driver when the device advertises the corresponding features, VIRTIO_BLK_F_DISCARD and VIRTIO_BLK_F_WRITE_ZEROES. Signed-off-by: Changpeng Liu <changpeng.liu@intel.com> Signed-off-by: Daniel Verkamp <dverkamp@chromium.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-12-16block: loop: check error using IS_ERR instead of IS_ERR_OR_NULL in loop_add()Chengguang Xu1-1/+1
blk_mq_init_queue() will not return NULL pointer to its caller, so it's better to replace IS_ERR_OR_NULL using IS_ERR in loop_add(). If in the future things change to check NULL pointer inside loop_add(), we should return -ENOMEM as return code instead of PTR_ERR(NULL). Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-16aoe: add __exit annotationChengguang Xu1-1/+1
Add __exit annotation to cleanup helper which is only called once in the module. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10mtip32xx: use BLK_STS_DEV_RESOURCE for device resourcesJens Axboe1-2/+2
For cases where we can only fail with IO in-flight, we should be using BLK_STS_DEV_RESOURCE instead of BLK_STS_RESOURCE. The latter refers to system wide resource constraints. Signed-off-by: Jens Axboe <axboe@kernel.dk>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.