aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/block
AgeCommit message (Collapse)AuthorFilesLines
2018-10-22libceph, rbd, ceph: move ceph_osdc_alloc_messages() callsIlya Dryomov1-7/+12
The current requirement is that ceph_osdc_alloc_messages() should be called after oid and oloc are known. In preparation for preallocating message data items, move ceph_osdc_alloc_messages() further down, so that it is called when OSD op codes are known. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22libceph: osd_req_op_cls_init() doesn't need to take opcodeIlya Dryomov1-2/+1
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22rbd: add __init/__exit annotationsChengguang Xu1-3/+3
Add __init/__exit annotation to init/cleanup helpers which are only called once in the module. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-18mtip32xx: fully switch to the generic DMA APIChristoph Hellwig1-29/+18
The mtip32xx used an odd mix of the old PCI and the generic DMA API, so switch it over to the generic API entirely. Note that this also removes a weird fallback to just a 32-bit coherent dma mask if the 64-bit dma mask doesn't work, as that can't even happen. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-18rsxx: switch to the generic DMA APIChristoph Hellwig2-27/+27
The PCI DMA API is deprecated, switch to the generic DMA API instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-18umem: switch to the generic DMA APIChristoph Hellwig1-20/+18
The PCI DMA API is deprecated, switch to the generic DMA API instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-18sx8: switch to the generic DMA APIChristoph Hellwig1-13/+13
The PCI DMA API is deprecated, switch to the generic DMA API instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-18sx8: remove dead IF_64BIT_DMA_IS_POSSIBLE codeChristoph Hellwig1-24/+5
This code has effectively been commented out since the first commit, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-18skd: switch to the generic DMA APIChristoph Hellwig1-38/+25
The PCI DMA API is deprecated, switch to the generic DMA API instead. Also make use of the dma_set_mask_and_coherent helper to easily set the streaming an coherent DMA masks together. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-17drivers/block: Remove DAC960 driverHannes Reinecke4-11656/+0
The DAC960 driver has been obsoleted by the myrb/myrs drivers, so it can be dropped. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-16sx8: convert to blk-mqJens Axboe1-45/+68
Convert from the old request_fn style driver to blk-mq. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-16z2ram: convert to blk-mqJens Axboe1-35/+46
Straight forward conversion to blk-mq, nothing special about this driver. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-16floppy: convert to blk-mqOmar Sandoval1-30/+36
This driver likes to fetch requests from all over the place, so make queue_rq put requests on a list so that the logic stays the same. Tested with QEMU. Signed-off-by: Omar Sandoval <osandov@fb.com> Converted to blk_mq_init_sq_queue() and fixed a few spots where the tag_set leaked on cleanup. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-16ataflop: convert to blk-mqOmar Sandoval1-102/+71
This driver is already pretty broken, in that it has two wait_events() (one in stdma_lock()) in request_fn. Get rid of the first one by freezing/quiescing the queue on format, and the second one by replacing it with stdma_try_lock(). The rest is straightforward. Compile-tested only and probably incorrect. Cc: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Converted to blk_mq_init_sq_queue() Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-16ataflop: fix error handling during setupOmar Sandoval1-10/+15
Move queue allocation next to disk allocation to fix a couple of issues: - If add_disk() hasn't been called, we should clear disk->queue before calling put_disk(). - If we fail to allocate a request queue, we still need to put all of the disks, not just the ones that we allocated queues for. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-16ataflop: fold headers into C fileOmar Sandoval1-2/+81
atafd.h and atafdreg.h are only used from ataflop.c, so merge them in there. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-16amiflop: convert to blk-mqOmar Sandoval1-78/+35
Straightforward conversion, just use the existing amiflop_lock to serialize access to the controller. Compile-tested only. Cc: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Converted to blk_mq_init_sq_queue() Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-16amiflop: clean up on errors during setupOmar Sandoval1-44/+40
The error handling in fd_probe_drives() doesn't clean up at all. Fix it up in preparation for converting to blk-mq. While we're here, get rid of the commented out amiga_floppy_remove(). Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-16amiflop: fold headers into C fileOmar Sandoval1-3/+120
amifd.h and amifdreg.h are only used from amiflop.c, and they're pretty small, so move the contents to amiflop.c and get rid of the .h files. This is preparation for adding a struct blk_mq_tag_set to struct amiga_floppy_struct. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-16swim3: convert to blk-mqOmar Sandoval1-87/+64
Pretty simple conversion. grab_drive() could probably be replaced by some freeze/quiesce incantation, but I left it alone, and just used freeze/quiesce for eject. Compile-tested only. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Omar Sandoval <osandov@fb.com> Converted to blk_mq_init_sq_queue(). Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-16swim3: add real error handling in setupOmar Sandoval1-24/+36
The driver doesn't have support for removing a device that has already been configured, but with more careful ordering we can avoid the need for that and make sure that we don't leak generic resources. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-16swim: convert to blk-mqOmar Sandoval1-52/+41
The only interesting thing here is that there may be two floppies (i.e., request queues) sharing the same controller, so we use the global struct swim_priv->lock to check whether the controller is busy. Compile-tested only. Tested-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Converted to blk_mq_init_sq_queue() Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-16swim: fix cleanup on setup errorOmar Sandoval1-2/+11
If we fail to allocate the request queue for a disk, we still need to free that disk, not just the previous ones. Additionally, we need to cleanup the previous request queues. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-15xsysace: convert to blk-mqJens Axboe1-25/+55
Straight forward conversion, using an internal list to enable the driver to pull requests at will. Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-15paride: convert pf to blk-mqJens Axboe1-14/+42
Tested-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-15paride: convert pd to blk-mqJens Axboe1-28/+66
Tested-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-15paride: convert pcd to blk-mqJens Axboe1-32/+56
Tested-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-15ps3disk: convert to blk-mqJens Axboe1-42/+44
Convert from the old request_fn style driver to blk-mq. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-15null_blk: remove set but not used variable 'q'YueHaibing1-4/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/block/null_blk_main.c: In function 'end_cmd': drivers/block/null_blk_main.c:609:24: warning: variable 'q' set but not used [-Wunused-but-set-variable] It not used any more after commit e50b1e327aeb ("null_blk: remove legacy IO path") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-14null_blk: remove legacy IO pathJens Axboe1-101/+6
We're planning on removing this code completely, kill the old path. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-14skd: fixup usage of legacy IO APIJens Axboe1-2/+2
We need to be using the mq variant of request requeue here. Fixes: ca33dd92968b ("skd: Convert to blk-mq") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-14aoe: convert aoeblk to blk-mqJens Axboe4-25/+61
Straight forward conversion - instead of rewriting the internal buffer retrieval logic, just replace the previous elevator peeking with an internal list of requests. Reviewed-by: "Ed L. Cashin" <ed.cashin@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-13drivers/block/z2ram: use ioremap_wt() instead of __ioremap(_PAGE_WRITETHRU)Christophe Leroy1-2/+1
_PAGE_WRITETHRU is a target specific flag. Prefer generic functions. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-10PCI: Remove pci_set_dma_max_seg_size()Christoph Hellwig1-1/+1
The few callers can just use dma_set_max_seg_size ()directly. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-10-10drivers/block: remove redundant 'default n' from Kconfig-sBartlomiej Zolnierkiewicz3-4/+0
'default n' is the default value for any bool or tristate Kconfig setting so there is no need to write it explicitly. Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO is not set' for visible symbols") the Kconfig behavior is the same regardless of 'default n' being present or not: ... One side effect of (and the main motivation for) this change is making the following two definitions behave exactly the same: config FOO bool config FOO bool default n With this change, neither of these will generate a '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied). That might make it clearer to people that a bare 'default n' is redundant. ... Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-08sunvdc: Remove VLA usageKees Cook1-4/+10
In the quest to remove all stack VLA usage from the kernel[1], this moves the math for cookies calculation into macros and allocates a fixed size array for the maximum number of cookies and adds a runtime sanity check. (Note that the size was always fixed, but just hidden from the compiler.) [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-03block: Finish renaming REQ_DISCARD into REQ_OP_DISCARDBart Van Assche5-6/+6
Some time ago REQ_DISCARD was renamed into REQ_OP_DISCARD. Some comments and documentation files were not updated however. Update these comments and documentation files. See also commit 4e1b2d52a80d ("block, fs, drivers: remove REQ_OP compat defs and related code"). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-02pktcdvd: fix fall-through annotationGustavo A. R. Silva1-1/+1
Replace "fallthru" with a proper "fall through" annotation. This fix is part of the ongoing efforts to enabling -Wimplicit-fallthrough Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-01Merge tag 'v4.19-rc6' into for-4.20/blockJens Axboe6-93/+245
Merge -rc6 in, for two reasons: 1) Resolve a trivial conflict in the blk-mq-tag.c documentation 2) A few important regression fixes went into upstream directly, so they aren't in the 4.20 branch. Signed-off-by: Jens Axboe <axboe@kernel.dk> * tag 'v4.19-rc6': (780 commits) Linux 4.19-rc6 MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.c cpufreq: qcom-kryo: Fix section annotations perf/core: Add sanity check to deal with pinned event failure xen/blkfront: correct purging of persistent grants Revert "xen/blkfront: When purging persistent grants, keep them in the buffer" selftests/powerpc: Fix Makefiles for headers_install change blk-mq: I/O and timer unplugs are inverted in blktrace dax: Fix deadlock in dax_lock_mapping_entry() x86/boot: Fix kexec booting failure in the SEV bit detection code bcache: add separate workqueue for journal_write to avoid deadlock drm/amd/display: Fix Edid emulation for linux drm/amd/display: Fix Vega10 lightup on S3 resume drm/amdgpu: Fix vce work queue was not cancelled when suspend Revert "drm/panel: Add device_link from panel device to DRM device" xen/blkfront: When purging persistent grants, keep them in the buffer clocksource/drivers/timer-atmel-pit: Properly handle error cases block: fix deadline elevator drain for zoned block devices ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set ... Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-29Merge tag 'for-linus-20180929' of git://git.kernel.dk/linux-blockGreg Kroah-Hartman1-2/+2
Jens writes: "Block fixes for 4.19-rc6 A set of fixes that should go into this release. This pull request contains: - A fix (hopefully) for the persistent grants for xen-blkfront. A previous fix from this series wasn't complete, hence reverted, and this one should hopefully be it. (Boris Ostrovsky) - Fix for an elevator drain warning with SMR devices, which is triggered when you switch schedulers (Damien) - bcache deadlock fix (Guoju Fang) - Fix for the block unplug tracepoint, which has had the timer/explicit flag reverted since 4.11 (Ilya) - Fix a regression in this series where the blk-mq timeout hook is invoked with the RCU read lock held, hence preventing it from blocking (Keith) - NVMe pull from Christoph, with a single multipath fix (Susobhan Dey)" * tag 'for-linus-20180929' of git://git.kernel.dk/linux-block: xen/blkfront: correct purging of persistent grants Revert "xen/blkfront: When purging persistent grants, keep them in the buffer" blk-mq: I/O and timer unplugs are inverted in blktrace bcache: add separate workqueue for journal_write to avoid deadlock xen/blkfront: When purging persistent grants, keep them in the buffer block: fix deadline elevator drain for zoned block devices blk-mq: Allow blocking queue tag iter callbacks nvme: properly propagate errors in nvme_mpath_init
2018-09-28xen/blkfront: correct purging of persistent grantsJuergen Gross1-2/+2
Commit a46b53672b2c2e3770b38a4abf90d16364d2584b ("xen/blkfront: cleanup stale persistent grants") introduced a regression as purged persistent grants were not pu into the list of free grants again. Correct that. Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-28Revert "xen/blkfront: When purging persistent grants, keep them in the buffer"Jens Axboe1-1/+3
Fix didn't work for all cases, reverting to add a (hopefully) better fix. This reverts commit f151ba989d149bbdfc90e5405724bbea094f9b17. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-28virtio-blk: modernize sysfs attribute creationHannes Reinecke1-29/+39
Use new-style DEVICE_ATTR_RO/DEVICE_ATTR_RW to create the sysfs attributes and register the disk with default sysfs attribute groups. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-28zram: register default groups with device_add_disk()Hannes Reinecke1-20/+6
Register default sysfs groups during device_add_disk() to avoid a race condition with udev during startup. Signed-off-by: Hannes Reinecke <hare@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-28aoe: register default groups with device_add_disk()Hannes Reinecke3-16/+7
Register default sysfs groups during device_add_disk() to avoid a race condition with udev during startup. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Ed L. Cachin <ed.cashin@acm.org> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-28block: genhd: add 'groups' argument to device_add_diskHannes Reinecke9-9/+9
Update device_add_disk() to take an 'groups' argument so that individual drivers can register a device with additional sysfs attributes. This avoids race condition the driver would otherwise have if these groups were to be created with sysfs_add_groups(). Signed-off-by: Martin Wilck <martin.wilck@suse.com> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-28block: cryptoloop: Remove VLA usage of skcipherKees Cook1-11/+11
In the quest to remove all stack VLA usage from the kernel[1], this replaces struct crypto_skcipher and SKCIPHER_REQUEST_ON_STACK() usage with struct crypto_sync_skcipher and SYNC_SKCIPHER_REQUEST_ON_STACK(), which uses a fixed stack size. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-27xen/blkfront: When purging persistent grants, keep them in the bufferBoris Ostrovsky1-3/+1
Commit a46b53672b2c ("xen/blkfront: cleanup stale persistent grants") added support for purging persistent grants when they are not in use. As part of the purge, the grants were removed from the grant buffer, This eventually causes the buffer to become empty, with BUG_ON triggered in get_free_grant(). This can be observed even on an idle system, within 20-30 minutes. We should keep the grants in the buffer when purging, and only free the grant ref. Fixes: a46b53672b2c ("xen/blkfront: cleanup stale persistent grants") Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-21blkcg: remove bio->bi_css and instead use bio->bi_blkgDennis Zhou (Facebook)1-2/+3
Prior patches ensured that all bios are now associated with some blkg. This now makes bio->bi_css unnecessary as blkg maintains a reference to the blkcg already. This patch removes the field bi_css and transfers corresponding uses to access via bi_blkg. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-21Merge tag 'for-linus-20180920' of git://git.kernel.dk/linux-blockGreg Kroah-Hartman1-0/+3
Jens writes: "Storage fixes for 4.19-rc5 - Fix for leaking kernel pointer in floppy ioctl (Andy Whitcroft) - NVMe pull request from Christoph, and a single ANA log page fix (Hannes) - Regression fix for libata qd32 support, where we trigger an illegal active command transition. This fixes a CD-ROM detection issue that was reported, but could also trigger premature completion of the internal tag (me)" * tag 'for-linus-20180920' of git://git.kernel.dk/linux-block: floppy: Do not copy a kernel pointer to user memory in FDGETPRM ioctl libata: mask swap internal and hardware tag nvme: count all ANA groups for ANA Log page
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.