| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add io stats accounting for bio requests so nvme block devices show
useful disk stats.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
The current code copies 'nr_io_queues' into 'q_count', modifies
'nr_io_queues' during MSI-X setup, then resets 'nr_io_queues' for
MSI setup. Instead, copy 'nr_io_queues' into 'vecs' and modify 'vecs'
during both MSI-X and MSI setup.
This lets us simplify the for-loops that set up MSI-X and MSI, and opens
the possibility of using more I/O queues than we have interrupt vectors,
should future benchmarking prove that to be a useful feature.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
Use kzalloc instead of kmalloc and a susbsequent memset.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Vishal Verma <vishal.l.verma@linux.intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
Adding debugfs entries to help with debugging and testing and
testing code.
pci_regs:
This entry will spit out all of the data stored on the BAR.
stats:
This entry will display all of the driver stats for each
DMA channel.
cram:
This will allow read/write ability to the CRAM address space
on our adapter's CPU.
Signed-off-by: Philip J Kelleher <pjk1939@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fixing incorrect stats calculation during read retries.
Signed-off-by: Philip J Kelleher <pjk1939@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Unfortunaly, our CPU register path does not do any kind of
EEH error checking. So to fix this issue, an ioread32 was
added to the CPU register timeout code. This way, the
driver can check to see if the timeout was caused by an EEH
error or not. This is a dummy read.
Signed-off-by: Philip J Kelleher <pjk1939@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Adding a sanity check to guarentee that DMAs outside of the device's
address space will be errored out right away.
Signed-off-by: Philip J Kelleher <pjk1939@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A kernel panic would occur on a DLPAR add if there was a partition
still mounted during the DLPAR remove. This bug fix will allow the
user to unmount the partition and bring the driver back into a
good state after the DLPAR add.
Signed-off-by: Philip J Kelleher <pjk1939@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Changing the adapter name from FlashSystem-80 to the official
name: Flash Adapter 900GB Full Height.
Signed-off-by: Philip J Kelleher <pjk1939@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Before, the partition table would have to be reread because our
card was attached before it transistioned out of it's 'starting'
state.
This change will cause the driver to wait to attach the device
until the adapter is ready.
Signed-off-by: Philip J Kelleher <pjk1939@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Previously, the block size was determined by whether or not
our Hardware could handle 512 byte accesses. Now, all of our
Hardware can handle 512 and 4096 block sizes.
This fix allows it to be user configurable.
Signed-off-by: Philip J Kelleher <pjk1939@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The workqueue mechanism has been reworked to prevent soft
lockup issues from occuring by adding in mutex sychronization.
Signed-off-by: Philip J Kelleher <pjk1939@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Before, DMAs would never be cancelled if there was a data stall
or an EEH Permenant failure which would cause an unrecoverable
I/O hang.
The DMA cancellation mechanism has been modified to fix
these issues and allows DMAs to be cancelled during the
above mentioned events.
Signed-off-by: Philip J Kelleher <pjk1939@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Giving all interrupt based events their own workqueue to complete
tasks on. This fixes a bug that would cause creg commands to timeout
if too many are issued at once.
Signed-off-by: Philip J Kelleher <pjk1939@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Check that the ring does not have an insane amount of requests
(more than there could fit on the ring).
If we detect this case we will stop processing the requests
and wait until the XenBus disconnects the ring.
The existing check RING_REQUEST_CONS_OVERFLOW which checks for how
many responses we have created in the past (rsp_prod_pvt) vs
requests consumed (req_cons) and whether said difference is greater or
equal to the size of the ring, does not catch this case.
Wha the condition does check if there is a need to process more
as we still have a backlog of responses to finish. Note that both
of those values (rsp_prod_pvt and req_cons) are not exposed on the
shared ring.
To understand this problem a mini crash course in ring protocol
response/request updates is in place.
There are four entries: req_prod and rsp_prod; req_event and rsp_event
to track the ring entries. We are only concerned about the first two -
which set the tone of this bug.
The req_prod is a value incremented by frontend for each request put
on the ring. Conversely the rsp_prod is a value incremented by the backend
for each response put on the ring (rsp_prod gets set by rsp_prod_pvt when
pushing the responses on the ring). Both values can
wrap and are modulo the size of the ring (in block case that is 32).
Please see RING_GET_REQUEST and RING_GET_RESPONSE for the more details.
The culprit here is that if the difference between the
req_prod and req_cons is greater than the ring size we have a problem.
Fortunately for us, the '__do_block_io_op' loop:
rc = blk_rings->common.req_cons;
rp = blk_rings->common.sring->req_prod;
while (rc != rp) {
..
blk_rings->common.req_cons = ++rc; /* before make_response() */
}
will loop up to the point when rc == rp. The macros inside of the
loop (RING_GET_REQUEST) is smart and is indexing based on the modulo
of the ring size. If the frontend has provided a bogus req_prod value
we will loop until the 'rc == rp' - which means we could be processing
already processed requests (or responses) often.
The reason the RING_REQUEST_CONS_OVERFLOW is not helping here is
b/c it only tracks how many responses we have internally produced
and whether we would should process more. The astute reader will
notice that the macro RING_REQUEST_CONS_OVERFLOW provides two
arguments - more on this later.
For example, if we were to enter this function with these values:
blk_rings->common.sring->req_prod = X+31415 (X is the value from
the last time __do_block_io_op was called).
blk_rings->common.req_cons = X
blk_rings->common.rsp_prod_pvt = X
The RING_REQUEST_CONS_OVERFLOW(&blk_rings->common, blk_rings->common.req_cons)
is doing:
req_cons - rsp_prod_pvt >= 32
Which is,
X - X >= 32 or 0 >= 32
And that is false, so we continue on looping (this bug).
If we re-use said macro RING_REQUEST_CONS_OVERFLOW and pass in the rp
instead (sring->req_prod) of rc, the this macro can do the check:
req_prod - rsp_prov_pvt >= 32
Which is,
X + 31415 - X >= 32 , or 31415 >= 32
which is true, so we can error out and break out of the function.
Unfortunatly the difference between rsp_prov_pvt and req_prod can be
at 32 (which would error out in the macro). This condition exists when
the backend is lagging behind with the responses and still has not finished
responding to all of them (so make_response has not been called), and
the rsp_prov_pvt + 32 == req_cons. This ends up with us not being able
to use said macro.
Hence introducing a new macro called RING_REQUEST_PROD_OVERFLOW which does
a simple check of:
req_prod - rsp_prod_pvt > RING_SIZE
And with the X values from above:
X + 31415 - X > 32
Returns true. Also not that if the ring is full (which is where
the RING_REQUEST_CONS_OVERFLOW triggered), we would not hit the
same condition:
X + 32 - X > 32
Which is false.
Lets use that macro.
Note that in v5 of this patchset the macro was different - we used an
earlier version.
Cc: stable@vger.kernel.org
[v1: Move the check outside the loop]
[v2: Add a pr_warn as suggested by David]
[v3: Use RING_REQUEST_CONS_OVERFLOW as suggested by Jan]
[v4: Move wake_up after kthread_stop as suggested by Jan]
[v5: Use RING_REQUEST_PROD_OVERFLOW instead]
[v6: Use RING_REQUEST_PROD_OVERFLOW - Jan's version]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
gadsa
|
|
Format 2 objects use 16 characters for the object name suffix to be
able to express the full 64-bit range of object numbers. Format 1
images only use 12 characters for this. Using 12-character names for
format 2 caused userspace and kernel rbd clients to read differently
named objects, which made an image written by one client look empty to
the other client.
CC: stable@vger.kernel.org # 3.9+
Reported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
Pull block layer fixes from Jens Axboe:
"Outside of bcache (which really isn't super big), these are all
few-liners. There are a few important fixes in here:
- Fix blk pm sleeping when holding the queue lock
- A small collection of bcache fixes that have been done and tested
since bcache was included in this merge window.
- A fix for a raid5 regression introduced with the bio changes.
- Two important fixes for mtip32xx, fixing an oops and potential data
corruption (or hang) due to wrong bio iteration on stacked devices."
* 'for-linus' of git://git.kernel.dk/linux-block:
scatterlist: sg_set_buf() argument must be in linear mapping
raid5: Initialize bi_vcnt
pktcdvd: silence static checker warning
block: remove refs to XD disks from documentation
blkpm: avoid sleep when holding queue lock
mtip32xx: Correctly handle bio->bi_idx != 0 conditions
mtip32xx: Fix NULL pointer dereference during module unload
bcache: Fix error handling in init code
bcache: clarify free/available/unused space
bcache: drop "select CLOSURES"
bcache: Fix incompatible pointer type warning
|
|
Merge misc fixes from Andrew Morton:
"Bunch of fixes and one little addition to math64.h"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (27 commits)
include/linux/math64.h: add div64_ul()
mm: memcontrol: fix lockless reclaim hierarchy iterator
frontswap: fix incorrect zeroing and allocation size for frontswap_map
kernel/audit_tree.c:audit_add_tree_rule(): protect `rule' from kill_rules()
mm: migration: add migrate_entry_wait_huge()
ocfs2: add missing lockres put in dlm_mig_lockres_handler
mm/page_alloc.c: fix watermark check in __zone_watermark_ok()
drivers/misc/sgi-gru/grufile.c: fix info leak in gru_get_config_info()
aio: fix io_destroy() regression by using call_rcu()
rtc-at91rm9200: use shadow IMR on at91sam9x5
rtc-at91rm9200: add shadow interrupt mask
rtc-at91rm9200: refactor interrupt-register handling
rtc-at91rm9200: add configuration support
rtc-at91rm9200: add match-table compile guard
fs/ocfs2/namei.c: remove unecessary ERROR when removing non-empty directory
swap: avoid read_swap_cache_async() race to deadlock while waiting on discard I/O completion
drivers/rtc/rtc-twl.c: fix missing device_init_wakeup() when booted with device tree
cciss: fix broken mutex usage in ioctl
audit: wait_for_auditd() should use TASK_UNINTERRUPTIBLE
drivers/rtc/rtc-cmos.c: fix accidentally enabling rtc channel
...
|
|
If a new logical drive is added and the CCISS_REGNEWD ioctl is invoked
(as is normal with the Array Configuration Utility) the process will
hang as below. It attempts to acquire the same mutex twice, once in
do_ioctl() and once in cciss_unlocked_open(). The BKL was recursive,
the mutex isn't.
Linux version 3.10.0-rc2 (scameron@localhost.localdomain) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Fri May 24 14:32:12 CDT 2013
[...]
acu D 0000000000000001 0 3246 3191 0x00000080
Call Trace:
schedule+0x29/0x70
schedule_preempt_disabled+0xe/0x10
__mutex_lock_slowpath+0x17b/0x220
mutex_lock+0x2b/0x50
cciss_unlocked_open+0x2f/0x110 [cciss]
__blkdev_get+0xd3/0x470
blkdev_get+0x5c/0x1e0
register_disk+0x182/0x1a0
add_disk+0x17c/0x310
cciss_add_disk+0x13a/0x170 [cciss]
cciss_update_drive_info+0x39b/0x480 [cciss]
rebuild_lun_table+0x258/0x370 [cciss]
cciss_ioctl+0x34f/0x470 [cciss]
do_ioctl+0x49/0x70 [cciss]
__blkdev_driver_ioctl+0x28/0x30
blkdev_ioctl+0x200/0x7b0
block_ioctl+0x3c/0x40
do_vfs_ioctl+0x89/0x350
SyS_ioctl+0xa1/0xb0
system_call_fastpath+0x16/0x1b
This mutex usage was added into the ioctl path when the big kernel lock
was removed. As it turns out, these paths are all thread safe anyway
(or can easily be made so) and we don't want ioctl() to be single
threaded in any case.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mike Miller <mike.miller@hp.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull ceph fixes from Sage Weil:
"There is a pair of fixes for double-frees in the recent bundle for
3.10, a couple of fixes for long-standing bugs (sleep while atomic and
an endianness fix), and a locking fix that can be triggered when osds
are going down"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: fix cleanup in rbd_add()
rbd: don't destroy ceph_opts in rbd_add()
ceph: ceph_pagelist_append might sleep while atomic
ceph: add cpu_to_le32() calls when encoding a reconnect capability
libceph: must hold mutex for reset_changed_osds()
|
|
Pull NVMe fixes from Matthew Wilcox.
* 'fixes-3.10' of git://git.infradead.org/users/willy/linux-nvme:
NVMe: Add MSI support
NVMe: Use dma_set_mask() correctly
Return the result from user admin command IOCTL even in case of failure
NVMe: Do not cancel command multiple times
NVMe: fix error return code in nvme_submit_bio_queue()
NVMe: check for integer overflow in nvme_map_user_pages()
MAINTAINERS: update NVM EXPRESS DRIVER file list
NVMe: Fix a signedness bug in nvme_trans_modesel_get_mp
NVMe: Remove redundant version.h header include
|
|
We need to make sure that the device is not RO or that
the request is not past the number of sectors we want to
issue the DISCARD operation for.
This fixes CVE-2013-2140.
Cc: stable@vger.kernel.org
Acked-by: Jan Beulich <JBeulich@suse.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
[v1: Made it pr_warn instead of pr_debug]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Currently xen-blkback passes the logical sector size over xenbus and
xen-blkfront sets up the paravirt disk with that logical block size.
But newer drives usually have the logical sector size set to 512 for
compatibility reasons and would show the actual sector size only in
physical sector size.
This results in the device being partitioned and accessed in dom0 with
the correct sector size, but the guest thinks 512 bytes is the correct
block size. And that results in poor performance.
To fix this, blkback gets modified to pass also physical-sector-size
over xenbus and blkfront to use both values to set up the paravirt
disk. I did not just change the passed in sector-size because I am
not sure having a bigger logical sector size than the physical one
is valid (and that would happen if a newer dom0 kernel hits an older
domU kernel). Also this way a domU set up before should still be
accessible (just some tools might detect the unaligned setup).
[v2: Make xenbus write failure non-fatal]
[v3: Use xenbus_scanf instead of xenbus_gather]
[v4: Rebased against segment changes]
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
The max module parameter (by default 32) is the maximum number of
segments that the frontend will negotiate with the backend for indirect
descriptors. Higher value means more potential throughput but more
memory usage. The backend picks the minimum of the frontend and its
default backend value.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Some devices only have support for MSI, not MSI-X. While MSI is more
limited, it still provides better performance than line-based interrupts.
Signed-off-by: Ramachandra Gajula <rama@fastorsystems.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
Jiri writes:
please pull from
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/linux-block.git for-jens
to receive one pktcdvd fix. It fixes a highly theoretical issue with using.
pktcdvd to work with media that'd be larger than 2TB :) But it's a correct.
fix and makes static checkers shut up about improperly cleaning upper.
32bits.
|
|
Static checkers complain about widening the binary "not" operations here
because sectors are u64 and "(pd)->settings.size" is unsigned int.
It unintentionally clears the high 32 bits of the sector. This means
that the driver won't work for devices with over 2TB of space. Since
this is a DVD drive, we're unlikely to reach that limit, but we may as
well silence the warning.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
In some circumstances setting a 64-bit DMA mask can fail, as explained
in Documentation/DMA-API-HOWTO.txt. Use the recommended code sequence
to set a 32-bit DMA mask if setting a 64-bit DMA mask fails.
Reported-by: Chayan Biswas <Chayan.Biswas@sandisk.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
The index on the page must be set before it is inserted in the radix
tree. Otherwise there is a small race which can occur during lookup
where the page can be found with the incorrect index. This will trigger
the BUG_ON() in brd_lookup_page().
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reported-by: Chris Wedgwood <cw@f00f.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If the port number is missing from the device-tree the device gets named
xs` instead of xsa. This fixes the check for missing ids.
Tested on ml507 board.
Signed-off-by: Gernot Vormayr <gvormayr@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We copy the result to user if the command is completed from the
controller even if it completes with failure (non-zero) status.
A return status of < 0 indicates the command was not completed
by the controller. The user application may expect the error code
in the result field in case of failure.
Signed-off-by: Chayan Biswas <Chayan.Biswas@sandisk.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
Add missing 'static' qualifiers
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Bjorn Helgaas pointed out that a recent commit introduced a
use-after-free condition in an error path for rbd_add().
He correctly stated:
I think b536f69a3a5 "rbd: set up devices only for mapped images"
introduced a use-after-free error in rbd_add():
...
If rbd_dev_device_setup() returns an error, we call
rbd_dev_image_release(), which ultimately kfrees rbd_dev.
Then we call rbd_dev_destroy(), which references fields in
the already-freed rbd_dev struct before kfreeing it again.
The simple fix is to return the error code after the call to
rbd_dev_image_release().
Closer examination revealed that there's no need to clean up
rbd_opts in that function, so fix that too.
Update some other comments that have also become out of date.
Reported-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Whether rbd_client_create() successfully creates a new client or
not, it takes responsibility for getting the ceph_opts structure
it's passed destroyed. If successful, the structure becomes
associated with the created client; if not, rbd_client_create()
will destroy it.
Previously, rbd_get_client() would call ceph_destroy_options()
if rbd_get_client() failed, and that meant it got called twice.
That led freeing various pointers more than once, which is never a
good idea.
This resolves:
http://tracker.ceph.com/issues/4559
Cc: stable@vger.kernel.org # 3.8+
Reported-by: Dan van der Ster <dan@vanderster.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Cancelling an already cancelled command does not do anything, so check
the command context before cancelling it, continuing if had already been
cancelled so we do not log the same problem every second if a device
stops responding.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
nvme_submit_flush_data() might overwrite the initialisation of the
return value with 0, so move the -ENOMEM setting close to the usage.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
You need to have CAP_SYS_ADMIN to trigger this overflow but it makes the
static checkers complain so we should fix it. The worry is that
"length" comes from copy_from_user() so we need to check that "length +
offset" can't overflow.
I also changed the min_t() cast to be unsigned instead of signed. Now
that we cap "length" to INT_MAX it doesn't make a difference, but it's a
little easier for reviewers to know that large values aren't cast to
negative.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
nvme_trans_modesel_get_mp() was defined with a unsigned return
type, but can return signed values.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vishal Verma <vishal.l.verma@linux.intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
version.h header inclusion is not necessary as detected by
checkversion.pl.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Vishal Verma <vishal.l.verma@linux.intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
Pull Ceph fixes from Sage Weil:
"Yes, this is a much larger pull than I would like after -rc1. There
are a few things included:
- a few fixes for leaks and incorrect assertions
- a few patches fixing behavior when mapped images are resized
- handling for cloned/layered images that are flattened out from
underneath the client
The last bit was non-trivial, and there is some code movement and
associated cleanup mixed in. This was ready and was meant to go in
last week but I missed the boat on Friday. My only excuse is that I
was waiting for an all clear from the testing and there were many
other shiny things to distract me.
Strictly speaking, handling the flatten case isn't a regression and
could wait, so if you like we can try to pull the series apart, but
Alex and I would much prefer to have it all in as it is a case real
users will hit with 3.10."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (33 commits)
rbd: re-submit flattened write request (part 2)
rbd: re-submit write request for flattened clone
rbd: re-submit read request for flattened clone
rbd: detect when clone image is flattened
rbd: reference count parent requests
rbd: define parent image request routines
rbd: define rbd_dev_unparent()
rbd: don't release write request until necessary
rbd: get parent info on refresh
rbd: ignore zero-overlap parent
rbd: support reading parent page data for writes
rbd: fix parent request size assumption
libceph: init sent and completed when starting
rbd: kill rbd_img_request_get()
rbd: only set up watch for mapped images
rbd: set mapping read-only flag in rbd_add()
rbd: support reading parent page data
rbd: fix an incorrect assertion condition
rbd: define rbd_dev_v2_header_info()
rbd: get rid of trivial v1 header wrappers
...
|
|
Stacking drivers may append bvecs to existing bio's, resulting
in non-zero bi_idx conditions. This patch counts the loops of
bio_for_each_segment() rather than inheriting the bi_idx value
to pass as a segment count to the hardware submission routine.
Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
An open file-handle to one or more of the driver exported debugfs
nodes causes raciness in recursive removal during module unload;
sometimes a stale parent dentry is dereferenced when more than 1
pci device is present.
Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add code to rbd_img_obj_exists_callback() to detect when a clone's
parent image has disappeared, and re-submit the original write
request in that case.
Kill off some redundant assertions.
This completes the resolution for:
http://tracker.ceph.com/issues/3763
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Add code to rbd_img_parent_read_full_callback() to detect when a
clone's parent image has disappeared, and re-submit the original
write request in that case. (See the previous commit for more
reasoning about why this is appropriate.)
Rename some variables in rbd_img_obj_parent_read_full_callback()
to match the convention used in the previous patch.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
If a clone image gets flattened while a parent read request is
underway, the original rbd object request needs to be resubmitted.
The reason is that by the time we get the response to the parent
read request, the data read from the parent may be out of date.
In other words, we could see this sequence of events:
rbd client parent image/osd
---------- ----------------
original object ENOENT;
issue parent read
respond to parent read
child image flattened
original image header refresh
<--- original object written independently here
parent read response received
Add code to rbd_img_parent_read_callback() to detect when a clone's
parent image has disappeared (as evidenced by its parent overlap
becoming 0), and re-submit the original read request in that case.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
A format 2 clone image can be the subject of a "flatten" operation,
during which all of its data gets "copied up" from its parent image,
leaving the image fully populated. Once this is complete, the
clone's association with the parent is abolished.
Since this can occur when a clone is mapped, we need to detect when
it has occurred and handle it accordingly. We know an image has
been flattened when we know it at one time had a parent, but we have
learned (via a "get_parent" object class method call) it no longer
has one.
There might be in-flight requests at the point we learn an image has
been flattened, so we can't simply clean up parent data structures
right away. Instead, we'll drop the initial parent reference when
the parent has disappeared (rather than when the image gets
destroyed), which will allow the last in-flight reference to clean
things up when it's complete.
We leverage the fact that a zero parent overlap renders an image
effectively unlayered. We set the overlap to 0 at the point we
detect the clone image has flattened, which allows the unlayered
behavior to take effect immediately, while keeping other parent
structures in place until in-flight requests to complete.
This and the next few patches resolve:
http://tracker.ceph.com/issues/3763
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Keep a reference count for uses of the parent information for an rbd
device.
An initial reference is set in rbd_img_request_create() if the
target image has a parent (with non-zero overlap). Each image
request for an image with a non-zero parent overlap gets another
reference when it's created, and that reference is dropped when the
request is destroyed.
The initial reference is dropped when the image gets torn down.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Define rbd_parent_request_create() and rbd_parent_request_destroy()
to handle the creation of parent image requests submitted for
layered image objects. For simplicity, let rbd_img_request_put()
handle dropping the reference to any image request (parent or not),
and call whichever destructor is appropriate on the last put.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Define rbd_dev_unparent() to encapsulate cleaning up parent data
structures from a layered rbd image.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Previously when a layered write was going to involve a copyup
request, the original osd request was released before submitting the
parent full-object read. The osd request for the copyup would then
be allocated in rbd_img_obj_parent_read_full_callback().
Shortly we will be handling the event of mapped layered images
getting flattened, and when that occurs we need to resubmit the
original request. We therefore don't want to release the osd
request until we really konw we're going to replace it--in the
callback function.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
Keith Busch
Matthew Wilcox
Tushar Behera
Philip J Kelleher
Konrad Rzeszutek Wilk
Josh Durgin
Linus Torvalds
Stephen M. Cameron
Stefan Bader
Ramachandra Rao Gajula
Jens Axboe
Dan Carpenter
Brian Behlendorf
Gernot Vormayr
Chayan Biswas
Jonghwan Choi
Alex Elder
Wei Yongjun
Vishal Verma
Sachin Kamat
Sam Bradshaw