aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/block
AgeCommit message (Collapse)AuthorFilesLines
2012-05-09drbd: fix potential spinlock deadlockLars Ellenberg1-7/+11
drbd_try_clear_on_disk_bm() has a sanity check for the number of blocks left to be resynced (rs_left) in the current resync extent. If it detects a mismatch, it complains, and forces a disconnect using drbd_force_state(mdev, NS(conn, C_DISCONNECTING)); Unfortunately, this may be called while holding the req_lock, and drbd_force_state() want's to aquire that lock itself. Deadlock. Don't force a disconnect, but fix up rs_left by recounting and reassigning the number of dirty blocks in that extent. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Fixed an obvious copy-n-paste mistakePhilipp Reisner2-2/+2
This bug might have caused troubles if disk-barriers and the ahead-behind more are enabled at the same time. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: send intermediate state change results to the peerLars Ellenberg4-16/+47
DRBD state changes schedule after_state_ch() actions to a worker thread, which decides on the old and new states of that change, whether to send an informational state update packet (P_STATE) to the peer. If it decides to drbd_send_state(), it would however always send the _curent_ state, which, if a second state change happens before the after_state_ch() of the first ran, may "fast-forward" the peer's view about this node. In most cases that is harmless, but sometimes this can confuse DRBD, for example into not actually starting a necessary resync if you do a very tight detach/attach loop on a Connected Secondary. Fix this by always sending the "new" state of the respective state transition which scheduled this after_state_ch() work. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: fix spurious meta data IO "error"Lars Ellenberg1-0/+2
When detaching, even cleanly detaching due to administrator request, we always go through D_FAILED before we become D_DISKLESS. Don't let that state change race with an in-flight meta data IO, or that one might think it actually experienced an IO error. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Fixed a race condition between detach and start of resyncPhilipp Reisner1-3/+3
drbd_state_lock() is only there to serialize cluster wide state changes. Testing the local disk state needs to happen while holding the global_state_lock. Otherwise you might see something like this (Oct 6 on kugel) 14:20:24 drbd0: conn( WFSyncUUID -> Connected ) disk( Inconsistent -> Failed ) 14:20:24 drbd0: helper command: /sbin/drbdadm before-resync-target minor-0 exit code 0 (0x0) 14:20:24 drbd0: conn( Connected -> SyncTarget ) disk( Failed -> Inconsistent ) Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: fix harmless race to not trigger an ASSERTLars Ellenberg1-1/+12
We have one pre-allocated page to do certain synchronous meta data IO with, using it is serialized like so: drbd_md_get_buffer(); drbd_md_sync_page_io(); drbd_md_sync_page_io(); ... drbd_md_put_buffer(); In drbd_md_sync_page_io() there is an ASSERT(atomic_read(&mdev->md_io_in_use) == 1); We want to be able to timeout on unresponsive lower level devices, so we can "detach" in that case. Inside drbd_md_sync_page_io() we grab an extra reference, to not have a dangling pointer in case a delayed IO eventually does still complete, even after we "detached" already. We need to put the extra reference before we signal completion from the completion handler, or the second drbd_md_sync_page_io() above may trigger the assert (reference count still 2). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Derive sync-UUIDs only from the bitmap-uuid if it is non-zeroPhilipp Reisner1-1/+5
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: drbd_nl_resize(): Fix missing put_ldev() on error pathAndreas Gruenbacher1-1/+5
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: fix "stalled" empty resyncLars Ellenberg1-3/+8
With sync-after dependencies, given "lucky" timing of pause/unpause events, and the end of an empty (0 bits set) resync was sometimes not detected on the SyncTarget, leading to a "stalled" SyncSource state. Fixed this by expecting not only "Inconsistent -> UpToDate" but also "Consistent -> UpToDate" transitions for the peer disk state to end a resync. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Bugfix for the connection behaviorPhilipp Reisner2-6/+6
If we get into the C_BROKEN_PIPE cstate once, the state engine set the thi->t_state of the receiver thread to restarting. But with the while loop in drbdd_init() a new connection gets established. After the call into drbdd() returns immediately since the thi->t_state is not RUNNING. The restart of drbd_init() then resets thi->t_state to RUNNING. I.e. after entering C_BROKEN_PIPE once, the next successful established connection gets wasted. The two parts of the fix: * Do not cause the thread to restart if we detect the issue with the sockets while we are in C_WF_CONNECTION. * Make sure that all actions that would have set us to C_BROKEN_PIPE happen before the state change to C_WF_REPORT_PARAMS. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Cleanup all epoch objects upon connection lossPhilipp Reisner1-2/+3
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: detach must not try to abort non-local requests from drbd-8.4Philipp Reisner1-9/+34
Cherry picked form 8.4 Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Consider that the no-data-condition could be in connected statePhilipp Reisner1-1/+2
...when the peer has inconsistent data. In that case we failed to clear the susp_nod flag. When the local disk was attached again Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Fixed current UUID generationPhilipp Reisner1-2/+2
Now, the new edition of the clause only fires if a diskless peer gets promoted. This is a fixup for "drbd: Delayed creation of current-UUID". Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: change some GFP_KERNEL to GFP_NOIOLars Ellenberg1-3/+3
Bitmap IO may happend in the context of an application write, in the generic block IO path. We need to use GFP_NOIO. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Implemented the disk-timeout optionPhilipp Reisner3-14/+25
When the disk-timeout is active, and it expires for a single request, we consider the local disk as D_FAILED. Note: With this change, I made both timeout based state transitions HARD state transitions. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Force flag for the detach operationPhilipp Reisner2-1/+16
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Allow new IOs while the local disk in in FAILED statePhilipp Reisner1-1/+1
The last bunch of commits prepared the 'detach from tar pit' feature. With that we can be for long time in disk state FAILED. We need to accept new IO requests during that time. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Bitmap IO functions can now return prematurely if the disk breaksPhilipp Reisner1-10/+30
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Added a kref to bm_aio_ctxPhilipp Reisner1-25/+59
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Hold a reference to ldev while doing meta-data IOPhilipp Reisner2-0/+7
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Keep a reference to the bio until the completion handler finishedPhilipp Reisner2-0/+2
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Implemented wait_until_done_or_disk_failure()Philipp Reisner3-5/+18
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Replaced md_io_mutex by an atomic: md_io_in_usePhilipp Reisner4-19/+51
The new function drbd_md_get_buffer() aborts waiting for the buffer in case the disk failes in the meantime. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: moved md_io into mdevPhilipp Reisner3-9/+10
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Immediately allow completion of IOs, that wait for IO completions on a failed diskPhilipp Reisner3-11/+37
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Keep a reference to barrier acked requestsPhilipp Reisner3-2/+23
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Improve compatibility with drbd's older than 8.3.7Philipp Reisner2-3/+8
Regression introduced with 8.3.11 commit: drbd: Take a more conservative approach when deciding max_bio_size Never ever tell an older drbd, that we support more than 32KiB in a single data request (packet). Never believe an older drbd, that is supports more than 32KiB in a single data request (packet) Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Only print sanitize state's warnings, if the state change happensPhilipp Reisner1-15/+40
The reason for this change is that, with when doing 'drbdadm invalidate' on a disconnected resource caused an "implicitly set pdsk from UpToDate to DUnknown" message, which was missleading. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: downgraded error printk to infoLars Ellenberg1-4/+2
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09DRBD: Fix comparison always false warning due to long/long long compareDavid Howells1-1/+1
Fix warnings of the following nature in the drbd header: In file included from drivers/block/drbd/drbd_bitmap.c:32: drivers/block/drbd/drbd_int.h: In function 'drbd_get_syncer_progress': drivers/block/drbd/drbd_int.h:2234: warning: comparison is always false due to limited range of data where mdev->rs_total (an unsigned long) is being compared to 1ULL << 32, which is always false on a 32-bit machine. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2012-05-09drbd: spelling fix: too smallLars Ellenberg1-4/+4
It is not "to small", but "too small". Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: cosmetic: fix accidental division instead of modulo when pretty printingLars Ellenberg1-1/+1
For large resync rates, seq_printf_with_thousands_grouping() accidentally only produced Y,000,00Y, instead of the real numbers. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Lower log priority for an event that is definitely not an errorPhilipp Reisner1-1/+1
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-07ceph: drop support for preferred_osd pgsSage Weil1-1/+0
This was an ill-conceived feature that has been removed from Ceph. Do this gracefully: - reject attempts to specify a preferred_osd via the ioctl - stop exposing this information via virtual xattrs - always fill in -1 for requests, in case we talk to an older server - don't calculate preferred_osd placements/pgids Reviewed-by: Alex Elder <elder@inktank.com> Signed-off-by: Sage Weil <sage@inktank.com>
2012-04-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller9-344/+807
Fix merge between commit 3adadc08cc1e ("net ax25: Reorder ax25_exit to remove races") and commit 0ca7a4c87d27 ("net ax25: Simplify and cleanup the ax25 sysctl handling") The former moved around the sysctl register/unregister calls, the later simply removed them. With help from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21sock: Introduce named constants for sk_reusePavel Emelyanov1-3/+3
Name them in a "backward compatible" manner, i.e. reuse or not are still 1 and 0 respectively. The reuse value of 2 means that the socket with it will forcibly reuse everyone else's port. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-20Merge tag 'stable/for-linus-3.4-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xenLinus Torvalds1-1/+1
Pull xen fixes from Konrad Rzeszutek Wilk: - mechanism to work with misconfigured backends (where they are advertised but in reality don't exist). - two tiny compile warning fixes. - proper error handling in gnttab_resume - Not using VM_PFNMAP anymore to allow backends in the same domain. * tag 'stable/for-linus-3.4-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: Revert "xen/p2m: m2p_find_override: use list_for_each_entry_safe" xen/resume: Fix compile warnings. xen/xenbus: Add quirk to deal with misconfigured backends. xen/blkback: Fix warning error. xen/p2m: m2p_find_override: use list_for_each_entry_safe xen/gntdev: do not set VM_PFNMAP xen/grant-table: add error-handling code on failure of gnttab_resume
2012-04-18xen/blkback: Fix warning error.Konrad Rzeszutek Wilk1-1/+1
drivers/block/xen-blkback/xenbus.c: In function 'xen_blkbk_discard': drivers/block/xen-blkback/xenbus.c:419:4: warning: passing argument 1 of 'dev_warn' makes pointer from integer without a cast +[enabled by default] include/linux/device.h:894:5: note: expected 'const struct device *' but argument is of type 'long int' It is unclear how that mistake made it in. It surely is wrong. Acked-by: Jens Axboe <axboe@kernel.dk> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-04-16Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-12/+29
Pull virtio fixes from Michael S. Tsirkin: "Here are some virtio fixes for 3.4: a test build fix, a patch by Ren fixing naming for systems with a massive number of virtio blk devices, and balloon fixes for powerpc by David Gibson. There was some discussion about Ren's patch for virtio disc naming: some people wanted to move the legacy name mangling function to the block core. But there's no concensus on that yet, and we can always deduplicate later. Added comments in the hope that this will stop people from copying this legacy naming scheme into future drivers." * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_balloon: fix handling of PAGE_SIZE != 4k virtio_balloon: Fix endian bug virtio_blk: helper function to format disk names tools/virtio: fix up vhost/test module build
2012-04-13Merge branch 'for-3.4/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds9-332/+778
Pull block driver bits from Jens Axboe: - A series of fixes for mtip32xx. Most from Asai at Micron, but also one from Greg, getting rid of the dependency on PCIE_HOTPLUG. - A few bug fixes for xen-blkfront, and blkback. - A virtio-blk fix for Vivek, making resize actually work. - Two fixes from Stephen, making larger transfers possible on cciss. This is needed for tape drive support. * 'for-3.4/drivers' of git://git.kernel.dk/linux-block: block: mtip32xx: remove HOTPLUG_PCI_PCIE dependancy mtip32xx: dump tagmap on failure mtip32xx: fix handling of commands in various scenarios mtip32xx: Shorten macro names mtip32xx: misc changes mtip32xx: Add new sysfs entry 'status' mtip32xx: make setting comp_time as common mtip32xx: Add new bitwise flag 'dd_flag' mtip32xx: fix error handling in mtip_init() virtio-blk: Call revalidate_disk() upon online disk resize xen/blkback: Make optional features be really optional. xen/blkback: Squash the discard support for 'file' and 'phy' type. mtip32xx: fix incorrect value set for drv_cleanup_done, and re-initialize and start port in mtip_restart_port() cciss: Fix scsi tape io with more than 255 scatter gather elements cciss: Initialize scsi host max_sectors for tape drive support xen-blkfront: make blkif_io_lock spinlock per-device xen/blkfront: don't put bdev right after getting it xen-blkfront: use bitmap_set() and bitmap_clear() xen/blkback: Enable blkback on HVM guests xen/blkback: use grant-table.c hypercall wrappers
2012-04-12virtio_blk: helper function to format disk namesRen Mingxin1-12/+29
The current virtio block's naming algorithm just supports 18278 (26^3 + 26^2 + 26) disks. If there are more virtio blocks, there will be disks with the same name. Based on commit 3e1a7ff8a0a7b948f2684930166954f9e8e776fe, add a function "virtblk_name_format()" for virtio block to support mass of disks naming. Notes: - Our naming scheme is ugly. We are stuck with it for virtio but don't use it for any new driver: new drivers should name their devices PREFIX%d where the sequence number can be allocated by ida - sd_format_disk_name has exactly the same logic. Moving it to a central place was deferred over worries that this will make people keep using the legacy naming in new drivers. We kept code idential in case someone wants to deduplicate later. Signed-off-by: Ren Mingxin <renmx@cn.fujitsu.com> Acked-by: Asias He <asias@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-04-12block: mtip32xx: remove HOTPLUG_PCI_PCIE dependancyGreg Kroah-Hartman1-1/+1
This removes the HOTPLUG_PCI_PCIE dependency on the driver and makes it depend on PCI. Cc: Sam Bradshaw <sbradshaw@micron.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-09mtip32xx: dump tagmap on failureAsai Thambi S P1-29/+33
Dump tagmap on failure, instead of individual tags. Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-09mtip32xx: fix handling of commands in various scenariosAsai Thambi S P2-51/+132
* If a ncq command time out and a non-ncq command is active, skip restart port * Queue(pause) ncq commands during operations spanning more than one non-ncq commands - secure erase, download microcode * When a non-ncq command is active, allow incoming non-ncq commands to wait instead of failing back * Changed timeout for download microcode and smart commands * If the device in write protect mode, fail all writes (do not send to device) * Set maximum retries to 2 Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-09mtip32xx: Shorten macro namesAsai Thambi S P2-76/+74
Shortened macros used to represent mtip_port->flags and dd->dd_flag Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-09mtip32xx: misc changesAsai Thambi S P1-22/+44
* Handle the interrupt completion of polled internal commands * Do not check remove pending flag for standby command * On rebuild failure, - set corresponding bit dd_flag - do not send standby command * Free ida index in remove path Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-09mtip32xx: Add new sysfs entry 'status'Asai Thambi S P2-29/+313
* Add support for detecting the following device status - write protect - over temp (thermal shutdown) * Add new sysfs entry 'status', possible values - online, write_protect, thermal_shutdown * Add new file 'sysfs-block-rssd' to document ABI (Reported-by: Greg Kroah-Hartman) Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-09mtip32xx: make setting comp_time as commonAsai Thambi S P1-11/+5
Moved setting completion time into mtip_issue_ncq_command() Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-09mtip32xx: Add new bitwise flag 'dd_flag'Asai Thambi S P2-55/+168
* Merged the following flags into one variable 'dd_flag': * drv_cleanup_done * resumeflag * Added the following flags into 'dd_flag' * remove pending * init done * Removed 'ftlrebuildflag' (similar flag is already part of mti_port->flags) Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.