aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/bus (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-07-01kernel.h: split out panic and oops helpersAndy Shevchenko1-0/+1
kernel.h is being used as a dump for all kinds of stuff for a long time. Here is the attempt to start cleaning it up by splitting out panic and oops helpers. There are several purposes of doing this: - dropping dependency in bug.h - dropping a loop by moving out panic_notifier.h - unload kernel.h from something which has its own domain At the same time convert users tree-wide to use new headers, although for the time being include new header back to kernel.h to avoid twisted indirected includes for existing users. [akpm@linux-foundation.org: thread_info.h needs limits.h] [andriy.shevchenko@linux.intel.com: ia64 fix] Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Co-developed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Wei Liu <wei.liu@kernel.org> Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Sebastian Reichel <sre@kernel.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Helge Deller <deller@gmx.de> # parisc Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-12Merge tag 'char-misc-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds1-4/+38
Pull char/misc driver fixes from Greg KH: "Here are some small misc driver fixes for 5.13-rc6 that fix some reported problems: - Tiny phy driver fixes for reported issues - rtsx regression for when the device suspended - mhi driver fix for a use-after-free All of these have been in linux-next for a few days with no reported issues" * tag 'char-misc-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG bus: mhi: pci-generic: Fix hibernation bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove() bus: mhi: pci_generic: T99W175: update channel name from AT to DUN phy: Sparx5 Eth SerDes: check return value after calling platform_get_resource() phy: ralink: phy-mt7621-pci: drop 'of_match_ptr' to fix -Wunused-const-variable phy: ti: Fix an error code in wiz_probe() phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init() phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe() phy: usb: Fix misuse of IS_ENABLED
2021-06-09bus: mhi: pci-generic: Fix hibernationLoic Poulain1-1/+35
This patch fixes crash after resuming from hibernation. The issue occurs when mhi stack is builtin and so part of the 'restore-kernel', causing the device to be resumed from 'restored kernel' with a no more valid context (memory mappings etc...) and leading to spurious crashes. This patch fixes the issue by implementing proper freeze/restore callbacks. Link: https://lore.kernel.org/r/1622571445-4505-1-git-send-email-loic.poulain@linaro.org Reported-by: Shujun Wang <wsj20369@163.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210606153741.20725-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove()Wei Yongjun1-1/+1
This driver's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. Link: https://lore.kernel.org/r/20210413160318.2003699-1-weiyongjun1@huawei.com Fixes: 8562d4fe34a3 ("mhi: pci_generic: Add health-check") Cc: stable <stable@vger.kernel.org> Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Hemant kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210606153741.20725-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09bus: mhi: pci_generic: T99W175: update channel name from AT to DUNJarvis Jiang1-2/+2
According to MHI v1.1 specification, change the channel name of T99W175 from "AT" to "DUN" (Dial-up networking) for both channel 32 and 33, so that the channels can be bound to the Qcom WWAN control driver, and device node such as /dev/wwan0p3DUN will be generated, which is very useful for debugging modem Link: https://lore.kernel.org/r/20210429014226.21017-1-jarvis.w.jiang@gmail.com [mani: changed the dev node to /dev/wwan0p3DUN] Fixes: aac426562f56 ("bus: mhi: pci_generic: Introduce Foxconn T99W175 support") Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Jarvis Jiang <jarvis.w.jiang@gmail.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210606153741.20725-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-25bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_actTony Lindgren1-2/+2
Looks like the swsup_sidle_act quirk handling is unreliable for serial ports. The serial ports just eventually stop idling until woken up and re-idled again. As the serial port not idling blocks any deeper SoC idle states, it's adds an annoying random flakeyness for power management. Let's just switch to swsup_sidle quirk instead like we already do for omap3 uarts. This means we manually idle the port instead of trying to use the hardware autoidle features when not in use. For more details on why the serial ports have been using swsup_idle_act, see commit 66dde54e978a ("ARM: OMAP2+: hwmod-data: UART IP needs software control to manage sidle modes"). It seems that the swsup_idle_act quirk handling is not enough though, and for example the TI Android kernel changed to using swsup_sidle with commit 77c34c84e1e0 ("OMAP4: HWMOD: UART1: disable smart-idle."). Fixes: b4a9a7a38917 ("bus: ti-sysc: Handle swsup idle mode quirks") Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Ivan Jelincic <parazyd@dyne.org> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sicelo A. Mhlongo <absicsz@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-18bus: ti-sysc: Fix am335x resume hang for usb otg moduleTony Lindgren1-3/+50
On am335x, suspend and resume only works once, and the system hangs if suspend is attempted again. However, turns out suspend and resume works fine multiple times if the USB OTG driver for musb controller is loaded. The issue is caused my the interconnect target module losing context during suspend, and it needs a restore on resume to be reconfigure again as debugged earlier by Dave Gerlach <d-gerlach@ti.com>. There are also other modules that need a restore on resume, like gpmc as noted by Dave. So let's add a common way to restore an interconnect target module based on a quirk flag. For now, let's enable the quirk for am335x otg only to fix the suspend and resume issue. As gpmc is not causing hangs based on tests with BeagleBone, let's patch gpmc separately. For gpmc, we also need a hardware reset done before restore according to Dave. To reinit the modules, we decouple system suspend from PM runtime. We replace calls to pm_runtime_force_suspend() and pm_runtime_force_resume() with direct calls to internal functions and rely on the driver internal state. There no point trying to handle complex system suspend and resume quirks via PM runtime. This is issue should have already been noticed with commit 1819ef2e2d12 ("bus: ti-sysc: Use swsup quirks also for am335x musb") when quirk handling was added for am335x otg for swsup. But the issue went unnoticed as having musb driver loaded hides the issue, and suspend and resume works once without the driver loaded. Fixes: 1819ef2e2d12 ("bus: ti-sysc: Use swsup quirks also for am335x musb") Suggested-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-18Merge branch 'fixes-rc1' into fixesTony Lindgren11-273/+763
2021-05-07bus: ti-sysc: Fix missing quirk flags for sataTony Lindgren1-1/+2
Naresh Kamboju <naresh.kamboju@linaro.org> reported that Beaglebone-X15 does not detect sata drives any longer after dra7 was flipped to boot with device tree data only. Turns out we are now missing the sata related quirk flags in ti-sysc that we used to have earlier. Fixes: 98feab31ac49 ("ARM: OMAP2+: Drop legacy platform data for dra7 sata") Fixes: 21206c8f2cb5 ("ARM: OMAP2+: Drop legacy platform data for omap5 sata") Link: https://lore.kernel.org/regressions/CA+G9fYtTN6ug3eBAW3wMcDeESUo+ebj7L5HBe5_fj4uqDExFQg@mail.gmail.com/ Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-04-26Merge tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2-4/+6
Pull ARM SoC driver updates from Arnd Bergmann: "Updates for SoC specific drivers include a few subsystems that have their own maintainers but send them through the soc tree: TEE/OP-TEE: - Add tracepoints around calls to secure world Memory controller drivers: - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms - Add debug statistics to Tegra20 memory controller - Update Tegra bindings and convert to dtschema ARM SCMI Firmware: - Support for modular SCMI protocols and vendor specific extensions - New SCMI IIO driver - Per-cpu DVFS The other driver changes are all from the platform maintainers directly and reflect the drivers that don't fit into any other subsystem as well as treewide changes for a particular platform. SoCFPGA: - Various cleanups contributed by Krzysztof Kozlowski Mediatek: - add MT8183 support to mutex driver - MMSYS: use per SoC array to describe the possible routing - add MMSYS support for MT8183 and MT8167 - add support for PMIC wrapper with integrated arbiter - add support for MT8192/MT6873 Tegra: - Bug fixes to PMC and clock drivers NXP/i.MX: - Update SCU power domain driver to keep console domain power on. - Add missing ADC1 power domain to SCU power domain driver. - Update comments for single global power domain in SCU power domain driver. - Add i.MX51/i.MX53 unique id support to i.MX SoC driver. NXP/FSL SoC driver updates for v5.13 - Add ACPI support for RCPM driver - Use generic io{read,write} for QE drivers after performance optimized for PowerPC - Fix QBMAN probe to cleanup HW states correctly for kexec - Various cleanup and style fix for QBMAN/QE/GUTS drivers OMAP: - Preparation to use devicetree for genpd - ti-sysc needs iorange check improved when the interconnect target module has no control registers listed - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid issues with missing resources and unnecessary deferred probe - ti-sysc debug option can now detect more devices - ti-sysc now warns if an old incomplete devicetree data is found as we now rely on it being complete for am3 and 4 - soc init code needs to check for prcm and prm nodes for omap4/5 and dra7 - omap-prm driver needs to enable autoidle retention support for omap4 - omap5 clocks are missing gpmc and ocmc clock registers - pci-dra7xx now needs to use builtin_platform_driver instead of using builtin_platform_driver_probe for deferred probe to work Raspberry Pi: - Fix-up all RPi firmware drivers so as for unbind to happen in an orderly fashion - Support for RPi's PoE hat PWM bus Qualcomm - Improved detection for SCM calling conventions - Support for OEM specific wifi firmware path - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP" * tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) soc: aspeed: fix a ternary sign expansion bug memory: mtk-smi: Add device-link between smi-larb and smi-common memory: samsung: exynos5422-dmc: handle clk_set_parent() failure memory: renesas-rpc-if: fix possible NULL pointer dereference of resource clk: socfpga: fix iomem pointer cast on 64-bit soc: aspeed: Adapt to new LPC device tree layout pinctrl: aspeed-g5: Adapt to new LPC device tree layout ipmi: kcs: aspeed: Adapt to new LPC DTS layout ARM: dts: Remove LPC BMC and Host partitions dt-bindings: aspeed-lpc: Remove LPC partitioning soc: fsl: enable acpi support in RCPM driver soc: qcom: mdt_loader: Detect truncated read of segments soc: qcom: mdt_loader: Validate that p_filesz < p_memsz soc: qcom: pdr: Fix error return code in pdr_register_listener firmware: qcom_scm: Fix kernel-doc function names to match firmware: qcom_scm: Suppress sysfs bind attributes firmware: qcom_scm: Workaround lack of "is available" call on SC7180 firmware: qcom_scm: Reduce locking section for __get_convention() firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers" ...
2021-04-26Merge tag 'arm-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-3/+78
Pull ARM SoC updates from Arnd Bergmann: "Almost all SoC code changes this time are for the TI OMAP platform, which continues its decade-long quest to move from describing a complex SoC in code to device tree. Aside from this, the Uniphier platform has a new maintainer and some platforms have minor bugfixes and cleanups that were not urgent enough for v5.12" * tag 'arm-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits) MAINTAINERS: Update ARM/UniPhier SoCs maintainers and status mailmap: Update email address for Nicolas Saenz MAINTAINERS: Update BCM2711/BCM2335 maintainer's mail ARM: exynos: correct kernel doc in platsmp ARM: hisi: use the correct HiSilicon copyright ARM: ux500: make ux500_cpu_die static ARM: s3c: Use pwm_get() in favour of pwm_request() in RX1950 ARM: OMAP1: fix incorrect kernel-doc comment syntax in file ARM: OMAP2+: fix incorrect kernel-doc comment syntax in file ARM: OMAP2+: Use DEFINE_SPINLOCK() for spinlock ARM: at91: pm: Move prototypes to mutually included header ARM: OMAP2+: use true and false for bool variable ARM: OMAP2+: add missing call to of_node_put() ARM: OMAP2+: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE ARM: imx: Kconfig: Fix typo in help ARM: mach-imx: Fix a spelling in the file pm-imx5.c bus: ti-sysc: Warn about old dtb for dra7 and omap4/5 ARM: OMAP2+: Stop building legacy code for dra7 and omap4/5 ARM: OMAP2+: Drop legacy platform data for omap5 hwmod ARM: OMAP2+: Drop legacy platform data for omap5 l3 ...
2021-04-26Merge tag 'char-misc-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds7-269/+754
Pull char/misc driver updates from Greg KH: "Here is the big set of various smaller driver subsystem updates for 5.13-rc1. Major bits in here are: - habanalabs driver updates - hwtracing driver updates - interconnect driver updates - mhi driver updates - extcon driver updates - fpga driver updates - new binder features added - nvmem driver updates - phy driver updates - soundwire driver updates - smaller misc and char driver fixes and updates. - bluetooth driver bugfix that maintainer wanted to go through this tree. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits) bluetooth: eliminate the potential race condition when removing the HCI controller coresight: etm-perf: Fix define build issue when built as module phy: Revert "phy: ti: j721e-wiz: add missing of_node_put" phy: ti: j721e-wiz: Add missing include linux/slab.h phy: phy-twl4030-usb: Fix possible use-after-free in twl4030_usb_remove() stm class: Use correct UUID APIs intel_th: pci: Add Alder Lake-M support intel_th: pci: Add Rocket Lake CPU support intel_th: Consistency and off-by-one fix intel_th: Constify attribute_group structs intel_th: Constify all drvdata references stm class: Remove an unused function habanalabs/gaudi: Fix uninitialized return code rc when read size is zero greybus: es2: fix kernel-doc warnings mei: me: add Alder Lake P device id. dw-xdata-pcie: Update outdated info and improve text format dw-xdata-pcie: Fix documentation build warns fbdev: zero-fill colormap in fbcmap.c firmware: qcom-scm: Fix QCOM_SCM configuration speakup: i18n: Switch to kmemdup_nul() in spk_msg_set() ...
2021-04-11Merge tag 'mhi-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-nextGreg Kroah-Hartman7-269/+754
Manivannan writes: MHI changes for v5.13 core: - Added support for Flash Programmer execution environment which allows the host machine (like x86) to flash the modem firmware to NAND or eMMC in the modem. The MHI bus will expose EDL channels (34, 35) and then the opensource QDL tool [1] can be used to flash the firmware from the host. - Added an internal helper for polling the MHI registers with a retry interval. This helper is used now to poll for the MHI ready state in MHI STATUS register. - Various fixes for issues found during the bringup of SDX24/SDX55 based Quectel and Telit modems. - Updates to the Execution environment handling for proper downloading of the AMSS image from SBL (Secondary Bootloader) mode. - Added support for sending STOP channel command to the MHI device and also made changes to the MHI core for proper handling of stop and restart. - Fixed the runtime_pm handling in the core by forcing the device to be in wake mode until TX completion and allowing it to suspend for RX. - Added sanity checks for values read from the device to avoid crash if those are corrupted somehow. - Fixed warnings generated by sparse (W=2) - Couple of kernel doc cleanups in mhi.h pci_generic: - Added support for runtime PM and generic PM - Added Firehose channels for flashing the firmware - Added support for modems such as Quectel EM1XXGR-L, SDX24, SDX65, Foxconn T99W175 exposing relevant channels. [1] https://git.linaro.org/landing-teams/working/qualcomm/qdl.git * tag 'mhi-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi: (49 commits) bus: mhi: fix typo in comments for struct mhi_channel_config bus: mhi: core: Fix shadow declarations bus: mhi: pci_generic: Constify mhi_controller_config struct definitions bus: mhi: pci_generic: Introduce Foxconn T99W175 support bus: mhi: core: Sanity check values from remote device before use bus: mhi: pci_generic: Add FIREHOSE channels bus: mhi: pci_generic: Implement PCI shutdown callback bus: mhi: Improve documentation on channel transfer setup APIs bus: mhi: core: Remove __ prefix for MHI channel unprepare function bus: mhi: core: Check channel execution environment before issuing reset bus: mhi: core: Clear configuration from channel context during reset bus: mhi: core: Hold device wake for channel update commands bus: mhi: core: Update debug messages to use client device bus: mhi: core: Improvements to the channel handling state machine bus: mhi: core: Clear context for stopped channels from remove() bus: mhi: core: Allow sending the STOP channel command bus: mhi: pci_generic: Add SDX65 based modem support bus: mhi: core: Remove pre_init flag used for power purposes bus: mhi: pm: reduce PM state change verbosity bus: mhi: core: Fix MHI runtime_pm behavior ...
2021-04-09treewide: change my e-mail address, fix my nameMarek Behún1-2/+2
Change my e-mail address to kabel@kernel.org, and fix my name in non-code parts (add diacritical mark). Link: https://lkml.kernel.org/r/20210325171123.28093-2-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jassi Brar <jassisinghbrar@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-09bus: mhi: core: Fix shadow declarationsManivannan Sadhasivam1-6/+6
This commit fixes below sparse warnings with W=2 about shadow declarations: drivers/bus/mhi/core/main.c: In function ‘parse_xfer_event’: drivers/bus/mhi/core/main.c:667:17: warning: declaration of ‘flags’ shadows a previous local [-Wshadow] 667 | unsigned long flags; | ^~~~~ drivers/bus/mhi/core/main.c:565:16: note: shadowed declaration is here 565 | unsigned long flags = 0; | ^~~~~ drivers/bus/mhi/core/main.c: In function ‘mhi_process_ctrl_ev_ring’: drivers/bus/mhi/core/main.c:856:23: warning: declaration of ‘new_state’ shadows a previous local [-Wshadow] 856 | enum mhi_pm_state new_state; | ^~~~~~~~~ drivers/bus/mhi/core/main.c:837:19: note: shadowed declaration is here 837 | enum mhi_state new_state; | ^~~~~~~~~ Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-08Merge tag 'qcom-drivers-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/driversArnd Bergmann1-1/+3
Qualcomm driver updates for 5.13 This introduces SC7280 and SM8350 support in the RPMH power-domain driver, SC7280 support to the LLCC driver, SC7280 support tot he AOSS QMP driver, cleanups to the RPMH driver and a few smaller fixes to the SMEM, QMI and EBI2 drivers. * tag 'qcom-drivers-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: bus: qcom: Put child node before return dt-bindings: firmware: scm: Add sc7280 support soc: qcom: rpmh-rsc: Fold WARN_ON() into if condition soc: qcom: rpmh-rsc: Loop over fewer bits in irq handler soc: qcom: rpmh-rsc: Remove tcs_is_free() API soc: qcom: smem: Update max processor count soc: qcom: aoss: Add AOSS QMP support for SC7280 dt-bindings: soc: qcom: aoss: Add SC7280 compatible soc: qcom: llcc: Add configuration data for SC7280 dt-bindings: arm: msm: Add LLCC for SC7280 soc: qcom: Fix typos in the file qmi_encdec.c soc: qcom: rpmhpd: Add sc7280 powerdomains dt-bindings: power: rpmpd: Add sc7280 to rpmpd binding soc: qcom: rpmhpd: Add SM8350 power domains dt-bindings: power: Add rpm power domain bindings for SM8350 Link: https://lore.kernel.org/r/20210404164951.713045-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-08bus: mhi: pci_generic: Constify mhi_controller_config struct definitionsManivannan Sadhasivam1-3/+3
"mhi_controller_config" struct is not modified inside "mhi_pci_dev_info" struct. So constify the instances. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-08bus: mhi: pci_generic: Introduce Foxconn T99W175 supportJarvis Jiang1-0/+47
Add support for T99W175 modems, this modem series is based on SDX55 qcom chip. The modem is mainly based on MBIM protocol for both the data and control path. This patch adds support for below modems: - T99W175(based on sdx55), Both for eSIM and Non-eSIM - DW5930e(based on sdx55), With eSIM, It's also T99W175 - DW5930e(based on sdx55), Non-eSIM, It's also T99W175 This patch was tested with Ubuntu 20.04 X86_64 PC as host Signed-off-by: Jarvis Jiang <jarvis.w.jiang@gmail.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408095524.3559-1-jarvis.w.jiang@gmail.com Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-08bus: mhi: core: Sanity check values from remote device before useJeffrey Hugo1-7/+74
When parsing the structures in the shared memory, there are values which come from the remote device. For example, a transfer completion event will have a pointer to the tre in the relevant channel's transfer ring. As another example, event ring elements may specify a channel in which the event occurred, however the specified channel value may not be valid as no channel is defined at that index even though the index may be less than the maximum allowed index. Such values should be considered to be untrusted, and validated before use. If we blindly use such values, we may access invalid data or crash if the values are corrupted. If validation fails, drop the relevant event. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Link: https://lore.kernel.org/r/1615411855-15053-1-git-send-email-jhugo@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: pci_generic: Add FIREHOSE channelsLoic Poulain1-0/+35
When device enters flash programmer context (FP), it exposes firehose protocol through the EDL dedicated channels. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617784860-32439-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: pci_generic: Implement PCI shutdown callbackLoic Poulain1-0/+7
Deinit the device on shutdown to halt MHI/PCI operation on device side. This change fixes floating device state with some hosts that do not fully shutdown PCIe device when rebooting. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1616169037-7969-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Remove __ prefix for MHI channel unprepare functionBhaumik Bhatt1-5/+5
The __mhi_unprepare_channel() API does not require the __ prefix. Get rid of it and make the internal function consistent with the other function names. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Link: https://lore.kernel.org/r/1617311778-1254-9-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Check channel execution environment before issuing resetBhaumik Bhatt1-0/+11
A client can attempt to unprepare certain channels for transfer even after the execution environment they are supposed to run in has changed. In the event that happens, the device need not be notified of the reset and the host can proceed with clean up for the channel context and memory allocated for it on the host as the device will no longer be able to respond to such a request. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617311778-1254-8-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Clear configuration from channel context during resetBhaumik Bhatt1-0/+13
When clearing up the channel context after client drivers are done using channels, the configuration is currently not being reset entirely. Ensure this is done to appropriately handle issues where clients unaware of the context state end up calling functions which expect a context. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617311778-1254-7-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Hold device wake for channel update commandsBhaumik Bhatt1-5/+14
MHI host can fail early if device is in a bad state by attempting to assert device wake and holding the runtime PM vote before sending a channel update command instead of performing a wake toggle and waiting for a timeout if the send were to fail. This can help improve the design and enable shorter wait periods for device to respond as votes are already held. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617311778-1254-6-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Update debug messages to use client deviceBhaumik Bhatt1-7/+5
Debug messages dealing with client devices use the generic MHI controller or parent device along with a channel number. It would be better to instead use the client device directly and enable better log messages for channel updates. Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617311778-1254-5-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Improvements to the channel handling state machineBhaumik Bhatt3-69/+100
Improve the channel handling state machine such that all commands go through a common function and a validation process to ensure that the state machine is not violated in any way and adheres to the MHI specification. Using this common function allows MHI to eliminate some unnecessary debug messages and code duplication. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617311778-1254-4-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Clear context for stopped channels from remove()Bhaumik Bhatt1-1/+2
If a channel was explicitly stopped but not reset and a driver remove is issued, clean up the channel context such that it is reflected on the device. This move is useful if a client driver module is unloaded or a device crash occurs with the host having placed the channel in a stopped state. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617311778-1254-3-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Allow sending the STOP channel commandBhaumik Bhatt1-0/+5
Add support to allow sending the STOP channel command. If a client driver would like to STOP a channel and have the device retain the channel context instead of issuing a RESET to it and clearing the context, this would provide support for it after the ability to send this command is exposed to clients. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617311778-1254-2-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: pci_generic: Add SDX65 based modem supportBhaumik Bhatt1-0/+11
Add generic info for SDX65 based modems. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1617399199-35172-1-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Remove pre_init flag used for power purposesBhaumik Bhatt2-23/+0
Some controllers can choose to skip preparation for power up. In that case, device context is initialized based on the pre_init flag not being set during mhi_prepare_for_power_up(). There is no reason MHI host driver should maintain and provide controllers with two separate paths for preparing MHI. Going forward, all controllers will be required to call the mhi_prepare_for_power_up() API followed by their choice of sync or async power up. This allows MHI host driver to get rid of the pre_init flag and sets up a common way for all controllers to use MHI. This also helps controllers fail early on during preparation phase in some failure cases. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617313309-24035-1-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: pm: reduce PM state change verbosityLoic Poulain1-5/+5
Since M3 can be entered/exited quite a lot when used for runtime PM, keep the mhi suspend/resume transitions quiet. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617700315-12492-2-git-send-email-loic.poulain@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Fix MHI runtime_pm behaviorLoic Poulain1-5/+16
This change ensures that PM reference is always get during packet queueing and released either after queuing completion (RX) or once the buffer has been consumed (TX). This guarantees proper update for underlying MHI controller runtime status (e.g. last_busy timestamp) and prevents suspend to be triggered while TX packets are flying, or before we completed update of the RX ring. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617700315-12492-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-01ARM: mvebu: avoid clang -Wtautological-constant warningArnd Bergmann1-1/+1
Clang warns about the comparison when using a 32-bit phys_addr_t: drivers/bus/mvebu-mbus.c:621:17: error: result of comparison of constant 4294967296 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare] if (reg_start >= 0x100000000ULL) Add a cast to shut up the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20210323131952.2835509-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01bus: mhi: core: Move to polling method to wait for MHI readyBhaumik Bhatt1-18/+16
In certain devices, it is likely that there is no incoming MHI interrupt for a transition to MHI READY state. One such example is the move from Pass Through to an SBL or AMSS execution environment. In order to facilitate faster bootup times as there is no need to wait until timeout_ms completes, MHI host can poll every 25 milliseconds to check if device has entered MHI READY until a maximum timeout of twice the timeout_ms is reached. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617215665-19593-3-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-01bus: mhi: core: Introduce internal register poll helper functionBhaumik Bhatt2-0/+26
Introduce helper function to allow MHI core driver to poll for a value in a register field. This helps reach a common path to read and poll register values along with a retry time interval. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617215665-19593-2-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-03-31bus: mhi: core: Improve state strings for debug messagesBhaumik Bhatt1-17/+17
As of now abbreviations are being used for many state and execution environment strings. Improve and expand those such that debug messages are clear. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1617067704-28850-8-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-03-31bus: mhi: core: Wait for MHI READY state in most scenariosBhaumik Bhatt2-4/+3
When moving from SYS_ERROR transition to a different execution environment, MHI host relies on the BHI register read to spawn the next image download or wait for READY -> M0 states. The device can at times move the execution environment to mission mode when a pass through is expected, which can result in a stall. Initiate a wait for MHI READY and write M0 such that the device can proceed with state change event updates for any new execution environment being entered. This allows us to remove conditionals in handling firmware load for PBL modes and keeps the execution environment out of the picture as it can change at any time. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617067704-28850-7-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-03-31bus: mhi: core: Identify Flash Programmer as a mission mode use caseBhaumik Bhatt1-1/+2
MHI power up can go through an EDL to Flash Programmer path when the device has a blank NAND. In those cases, mhi_sync_power_up() can timeout waiting for a mission mode execution environment. Allow a successful power up instead by identifying Flash Programmer as a valid mission mode execution environment with a purpose to flash the device image contents. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1617067704-28850-6-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-03-31bus: mhi: core: Add support for Flash Programmer execution environmentCarl Yin4-0/+12
MHI WWAN modems support downloading firmware to NAND or eMMC using Firehose protocol with process as follows: 1. Modem boots up, enters AMSS execution environment and the device later enters EDL (Emergency Download) mode through any mechanism host can use such as a diag command. 2. Modem enters SYS_ERROR, MHI host handles SYS_ERROR transition. 3. EDL image for device to enter 'Flash Programmer' execution environment is then flashed via BHI interface from host. 4. Modem enters MHI READY -> M0 and sends the Flash Programmer execution environment change to host. 5. Following that, EDL/FIREHOSE channels (34, 35) are made available from the host. 6. User space tool for downloading firmware image to modem over the EDL channels using Firehose protocol. Link to USB flashing tool: https://git.linaro.org/landing-teams/working/qualcomm/qdl.git/ Make the necessary changes to allow for this sequence to occur and allow using the Flash Programmer execution environment. Signed-off-by: Carl Yin <carl.yin@quectel.com> Co-developed-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617067704-28850-5-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-03-31bus: mhi: core: Handle EDL mode entry appropriatelyBhaumik Bhatt1-1/+18
Device entering EDL or Emergency Download Mode will be in a SYS_ERROR MHI state. This requires MHI host to proceed with the EDL image download over BHI before device can enter an MHI READY state and proceed with further bootup. Allow this to be handled by relying on the execution environment check after SYS_ERROR processing to determine whether to wait for an MHI READY or download the EDL image over BHI after moving MHI PM state to Power on Reset internally. This way handling is contained well within the MHI core driver and helps pave the way for Flash Programmer execution environment functionality. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617067704-28850-4-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-03-31bus: mhi: core: Wait for ready after an EDL firmware downloadBhaumik Bhatt1-4/+4
Currently, the firmware load handler returns after the EDL image is downloaded. Wait for an MHI READY transition instead as the specification expects so as to proceed with further bootup such as device entering Flash Programmer execution environment. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1617067704-28850-3-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-03-31bus: mhi: core: Rely on accurate method to determine EDL modeBhaumik Bhatt1-1/+2
Relying on the current execution environment to determine if EDL image was downloaded should not be done as the execution environment can change at this point in error cases and we may misread it. Instead, MHI can rely on the local 'fw_name' variable as a safer alternative. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1617067704-28850-2-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-03-29bus: qcom: Put child node before returnPan Bian1-1/+3
Put child node before return to fix potential reference count leak. Generally, the reference count of child is incremented and decremented automatically in the macro for_each_available_child_of_node() and should be decremented manually if the loop is broken in loop body. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Fixes: 335a12754808 ("bus: qcom: add EBI2 driver") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210121114907.109267-1-bianpan2016@163.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-24bus: ti-sysc: Use kzalloc for allocating only one thingZheng Yongjun1-1/+1
Use kzalloc rather than kcalloc(1,...) The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ @@ - kcalloc(1, + kzalloc( ...) // </smpl> Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-24bus: ti-sysc: remove unneeded semicolonYang Li1-2/+2
Eliminate the following coccicheck warning: ./drivers/bus/ti-sysc.c:1595:2-3: Unneeded semicolon ./drivers/bus/ti-sysc.c:2833:3-4: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-18Merge tag 'omap-for-v5.12/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixesArnd Bergmann2-3/+5
Fixes for omaps for v5.12-rc cycle Regression fixes for multiple issues found mostly caused by recent changes to drop legacy platform data and and starting to use the new prm driver reset controller: - Fix ocp interconnect bus access error reporting for omap_l3_noc by setting IRQF_NO_THREAD - Fix changed mmc slot order regression by adding mmc aliases for am335x - Fix dra7 reboot regression caused by invalid pcie reset map - Fix smartreflex init regression caused by dropped legacy data - Fix ti-sysc driver warning on unbind if reset is not deasserted - Fix flakey reset deassert for dra7 iva * tag 'omap-for-v5.12/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva bus: ti-sysc: Fix warning on unbind if reset is not deasserted ARM: OMAP2+: Fix smartreflex init regression after dropping legacy data soc: ti: omap-prm: Fix reboot issue with invalid pcie reset map for dra7 ARM: dts: am33xx: add aliases for mmc interfaces bus: omap_l3_noc: mark l3 irqs as IRQF_NO_THREAD Link: https://lore.kernel.org/r/pull-1614868603-800959@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-03-16bus: mhi: core: Check state before processing power_downJeffrey Hugo1-2/+10
We cannot process a power_down if the power state is DISABLED. There is no valid mhi_ctxt in that case, so attepting to process the power_down will likely result in a null pointer dereference. If the power state is DISABLED, there is nothing to do anyways, so just bail early. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1615409365-8165-1-git-send-email-jhugo@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-03-16bus: mhi: core: Return EAGAIN if MHI ring is fullFan Wu1-1/+1
Currently ENOMEM is returned when MHI ring is full. This error code is very misleading. Change to EAGAIN instead. Signed-off-by: Fan Wu <wufan@codeaurora.org> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1615408803-7016-1-git-send-email-jhugo@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-03-15bus: mhi: core: remove redundant initialization of variables state and eeColin Ian King1-2/+2
The variables state and ee are being initialized with values that are never read and are being updated later with a new values. The initializations are redundant and can be removed. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Addresses-Coverity: ("Unused value") Link: https://lore.kernel.org/r/20210311111727.8433-1-colin.king@canonical.com Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.