aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/char/random.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-01-07random: remove some dead code of poolinfoYangtao Li1-30/+0
Since it is not being used, so delete it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Link: https://lore.kernel.org/r/20190607182517.28266-5-tiny.windzz@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-01-07random: fix typo in add_timer_randomness()Yangtao Li1-1/+1
s/entimate/estimate Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Link: https://lore.kernel.org/r/20190607182517.28266-4-tiny.windzz@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-01-07random: Add and use pr_fmt()Yangtao Li1-12/+11
Prefix all printk/pr_<level> messages with "random: " to make the logging a bit more consistent. Miscellanea: o Convert a printks to pr_notice o Whitespace to align to open parentheses o Remove embedded "random: " from pr_* as pr_fmt adds it Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Link: https://lore.kernel.org/r/20190607182517.28266-3-tiny.windzz@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-01-07random: convert to ENTROPY_BITS for better code readabilityYangtao Li1-3/+2
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Link: https://lore.kernel.org/r/20190607182517.28266-2-tiny.windzz@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-01-07random: remove unnecessary unlikely()Yangtao Li1-4/+2
WARN_ON() already contains an unlikely(), so it's not necessary to use unlikely. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Link: https://lore.kernel.org/r/20190607182517.28266-1-tiny.windzz@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-01-07random: remove kernel.random.read_wakeup_thresholdAndy Lutomirski1-17/+1
It has no effect any more, so remove it. We can revert this if there is some user code that expects to be able to set this sysctl. Signed-off-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/a74ed2cf0b5a5451428a246a9239f5bc4e29358f.1577088521.git.luto@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-01-07random: delete code to pull data into poolsAndy Lutomirski1-40/+0
There is no pool that pulls, so it was just dead code. Signed-off-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/4a05fe0c7a5c831389ef4aea51d24528ac8682c7.1577088521.git.luto@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-01-07random: remove the blocking poolAndy Lutomirski1-106/+0
There is no longer any interface to read data from the blocking pool, so remove it. This enables quite a bit of code deletion, much of which will be done in subsequent patches. Signed-off-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/511225a224bf0a291149d3c0b8b45393cd03ab96.1577088521.git.luto@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-01-07random: make /dev/random be almost like /dev/urandomAndy Lutomirski1-41/+14
This patch changes the read semantics of /dev/random to be the same as /dev/urandom except that reads will block until the CRNG is ready. None of the cleanups that this enables have been done yet. As a result, this gives a warning about an unused function. Signed-off-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/5e6ac8831c6cf2e56a7a4b39616d1732b2bdd06c.1577088521.git.luto@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-01-07random: ignore GRND_RANDOM in getentropy(2)Andy Lutomirski1-3/+0
The separate blocking pool is going away. Start by ignoring GRND_RANDOM in getentropy(2). This should not materially break any API. Any code that worked without this change should work at least as well with this change. Signed-off-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/705c5a091b63cc5da70c99304bb97e0109be0a26.1577088521.git.luto@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-01-07random: add GRND_INSECURE to return best-effort non-cryptographic bytesAndy Lutomirski1-2/+9
Signed-off-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/d5473b56cf1fa900ca4bd2b3fc1e5b8874399919.1577088521.git.luto@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-01-07random: Add a urandom_read_nowait() for random APIs that don't warnAndy Lutomirski1-6/+15
/dev/random and getrandom() never warn. Split the meat of urandom_read() into urandom_read_nowarn() and leave the warning code in urandom_read(). This has no effect on kernel behavior, but it makes subsequent patches more straightforward. It also makes the fact that getrandom() never warns more obvious. Signed-off-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/c87ab200588de746431d9f916501ef11e5242b13.1577088521.git.luto@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-01-07random: Don't wake crng_init_wait when crng_init == 1Andy Lutomirski1-1/+0
crng_init_wait is only used to wayt for crng_init to be set to 2, so there's no point to waking it when crng_init is set to 1. Remove the unnecessary wake_up_interruptible() call. Signed-off-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/6fbc0bfcbfc1fa2c76fd574f5b6f552b11be7fde.1577088521.git.luto@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-01-07char/random: silence a lockdep splat with printk()Sergey Senozhatsky1-2/+3
Sergey didn't like the locking order, uart_port->lock -> tty_port->lock uart_write (uart_port->lock) __uart_start pl011_start_tx pl011_tx_chars uart_write_wakeup tty_port_tty_wakeup tty_port_default tty_port_tty_get (tty_port->lock) but those code is so old, and I have no clue how to de-couple it after checking other locks in the splat. There is an onging effort to make all printk() as deferred, so until that happens, workaround it for now as a short-term fix. LTP: starting iogen01 (export LTPROOT; rwtest -N iogen01 -i 120s -s read,write -Da -Dv -n 2 500b:$TMPDIR/doio.f1.$$ 1000b:$TMPDIR/doio.f2.$$) WARNING: possible circular locking dependency detected ------------------------------------------------------ doio/49441 is trying to acquire lock: ffff008b7cff7290 (&(&zone->lock)->rlock){..-.}, at: rmqueue+0x138/0x2050 but task is already holding lock: 60ff000822352818 (&pool->lock/1){-.-.}, at: start_flush_work+0xd8/0x3f0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (&pool->lock/1){-.-.}: lock_acquire+0x320/0x360 _raw_spin_lock+0x64/0x80 __queue_work+0x4b4/0xa10 queue_work_on+0xac/0x11c tty_schedule_flip+0x84/0xbc tty_flip_buffer_push+0x1c/0x28 pty_write+0x98/0xd0 n_tty_write+0x450/0x60c tty_write+0x338/0x474 __vfs_write+0x88/0x214 vfs_write+0x12c/0x1a4 redirected_tty_write+0x90/0xdc do_loop_readv_writev+0x140/0x180 do_iter_write+0xe0/0x10c vfs_writev+0x134/0x1cc do_writev+0xbc/0x130 __arm64_sys_writev+0x58/0x8c el0_svc_handler+0x170/0x240 el0_sync_handler+0x150/0x250 el0_sync+0x164/0x180 -> #3 (&(&port->lock)->rlock){-.-.}: lock_acquire+0x320/0x360 _raw_spin_lock_irqsave+0x7c/0x9c tty_port_tty_get+0x24/0x60 tty_port_default_wakeup+0x1c/0x3c tty_port_tty_wakeup+0x34/0x40 uart_write_wakeup+0x28/0x44 pl011_tx_chars+0x1b8/0x270 pl011_start_tx+0x24/0x70 __uart_start+0x5c/0x68 uart_write+0x164/0x1c8 do_output_char+0x33c/0x348 n_tty_write+0x4bc/0x60c tty_write+0x338/0x474 redirected_tty_write+0xc0/0xdc do_loop_readv_writev+0x140/0x180 do_iter_write+0xe0/0x10c vfs_writev+0x134/0x1cc do_writev+0xbc/0x130 __arm64_sys_writev+0x58/0x8c el0_svc_handler+0x170/0x240 el0_sync_handler+0x150/0x250 el0_sync+0x164/0x180 -> #2 (&port_lock_key){-.-.}: lock_acquire+0x320/0x360 _raw_spin_lock+0x64/0x80 pl011_console_write+0xec/0x2cc console_unlock+0x794/0x96c vprintk_emit+0x260/0x31c vprintk_default+0x54/0x7c vprintk_func+0x218/0x254 printk+0x7c/0xa4 register_console+0x734/0x7b0 uart_add_one_port+0x734/0x834 pl011_register_port+0x6c/0xac sbsa_uart_probe+0x234/0x2ec platform_drv_probe+0xd4/0x124 really_probe+0x250/0x71c driver_probe_device+0xb4/0x200 __device_attach_driver+0xd8/0x188 bus_for_each_drv+0xbc/0x110 __device_attach+0x120/0x220 device_initial_probe+0x20/0x2c bus_probe_device+0x54/0x100 device_add+0xae8/0xc2c platform_device_add+0x278/0x3b8 platform_device_register_full+0x238/0x2ac acpi_create_platform_device+0x2dc/0x3a8 acpi_bus_attach+0x390/0x3cc acpi_bus_attach+0x108/0x3cc acpi_bus_attach+0x108/0x3cc acpi_bus_attach+0x108/0x3cc acpi_bus_scan+0x7c/0xb0 acpi_scan_init+0xe4/0x304 acpi_init+0x100/0x114 do_one_initcall+0x348/0x6a0 do_initcall_level+0x190/0x1fc do_basic_setup+0x34/0x4c kernel_init_freeable+0x19c/0x260 kernel_init+0x18/0x338 ret_from_fork+0x10/0x18 -> #1 (console_owner){-...}: lock_acquire+0x320/0x360 console_lock_spinning_enable+0x6c/0x7c console_unlock+0x4f8/0x96c vprintk_emit+0x260/0x31c vprintk_default+0x54/0x7c vprintk_func+0x218/0x254 printk+0x7c/0xa4 get_random_u64+0x1c4/0x1dc shuffle_pick_tail+0x40/0xac __free_one_page+0x424/0x710 free_one_page+0x70/0x120 __free_pages_ok+0x61c/0xa94 __free_pages_core+0x1bc/0x294 memblock_free_pages+0x38/0x48 __free_pages_memory+0xcc/0xfc __free_memory_core+0x70/0x78 free_low_memory_core_early+0x148/0x18c memblock_free_all+0x18/0x54 mem_init+0xb4/0x17c mm_init+0x14/0x38 start_kernel+0x19c/0x530 -> #0 (&(&zone->lock)->rlock){..-.}: validate_chain+0xf6c/0x2e2c __lock_acquire+0x868/0xc2c lock_acquire+0x320/0x360 _raw_spin_lock+0x64/0x80 rmqueue+0x138/0x2050 get_page_from_freelist+0x474/0x688 __alloc_pages_nodemask+0x3b4/0x18dc alloc_pages_current+0xd0/0xe0 alloc_slab_page+0x2b4/0x5e0 new_slab+0xc8/0x6bc ___slab_alloc+0x3b8/0x640 kmem_cache_alloc+0x4b4/0x588 __debug_object_init+0x778/0x8b4 debug_object_init_on_stack+0x40/0x50 start_flush_work+0x16c/0x3f0 __flush_work+0xb8/0x124 flush_work+0x20/0x30 xlog_cil_force_lsn+0x88/0x204 [xfs] xfs_log_force_lsn+0x128/0x1b8 [xfs] xfs_file_fsync+0x3c4/0x488 [xfs] vfs_fsync_range+0xb0/0xd0 generic_write_sync+0x80/0xa0 [xfs] xfs_file_buffered_aio_write+0x66c/0x6e4 [xfs] xfs_file_write_iter+0x1a0/0x218 [xfs] __vfs_write+0x1cc/0x214 vfs_write+0x12c/0x1a4 ksys_write+0xb0/0x120 __arm64_sys_write+0x54/0x88 el0_svc_handler+0x170/0x240 el0_sync_handler+0x150/0x250 el0_sync+0x164/0x180 other info that might help us debug this: Chain exists of: &(&zone->lock)->rlock --> &(&port->lock)->rlock --> &pool->lock/1 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&pool->lock/1); lock(&(&port->lock)->rlock); lock(&pool->lock/1); lock(&(&zone->lock)->rlock); *** DEADLOCK *** 4 locks held by doio/49441: #0: a0ff00886fc27408 (sb_writers#8){.+.+}, at: vfs_write+0x118/0x1a4 #1: 8fff00080810dfe0 (&xfs_nondir_ilock_class){++++}, at: xfs_ilock+0x2a8/0x300 [xfs] #2: ffff9000129f2390 (rcu_read_lock){....}, at: rcu_lock_acquire+0x8/0x38 #3: 60ff000822352818 (&pool->lock/1){-.-.}, at: start_flush_work+0xd8/0x3f0 stack backtrace: CPU: 48 PID: 49441 Comm: doio Tainted: G W Hardware name: HPE Apollo 70 /C01_APACHE_MB , BIOS L50_5.13_1.11 06/18/2019 Call trace: dump_backtrace+0x0/0x248 show_stack+0x20/0x2c dump_stack+0xe8/0x150 print_circular_bug+0x368/0x380 check_noncircular+0x28c/0x294 validate_chain+0xf6c/0x2e2c __lock_acquire+0x868/0xc2c lock_acquire+0x320/0x360 _raw_spin_lock+0x64/0x80 rmqueue+0x138/0x2050 get_page_from_freelist+0x474/0x688 __alloc_pages_nodemask+0x3b4/0x18dc alloc_pages_current+0xd0/0xe0 alloc_slab_page+0x2b4/0x5e0 new_slab+0xc8/0x6bc ___slab_alloc+0x3b8/0x640 kmem_cache_alloc+0x4b4/0x588 __debug_object_init+0x778/0x8b4 debug_object_init_on_stack+0x40/0x50 start_flush_work+0x16c/0x3f0 __flush_work+0xb8/0x124 flush_work+0x20/0x30 xlog_cil_force_lsn+0x88/0x204 [xfs] xfs_log_force_lsn+0x128/0x1b8 [xfs] xfs_file_fsync+0x3c4/0x488 [xfs] vfs_fsync_range+0xb0/0xd0 generic_write_sync+0x80/0xa0 [xfs] xfs_file_buffered_aio_write+0x66c/0x6e4 [xfs] xfs_file_write_iter+0x1a0/0x218 [xfs] __vfs_write+0x1cc/0x214 vfs_write+0x12c/0x1a4 ksys_write+0xb0/0x120 __arm64_sys_write+0x54/0x88 el0_svc_handler+0x170/0x240 el0_sync_handler+0x150/0x250 el0_sync+0x164/0x180 Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by: Qian Cai <cai@lca.pw> Link: https://lore.kernel.org/r/1573679785-21068-1-git-send-email-cai@lca.pw Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-12-17random: don't forget compat_ioctl on urandomJason A. Donenfeld1-0/+1
Recently, there's been some compat ioctl cleanup, in which large hardcoded lists were replaced with compat_ptr_ioctl. One of these changes involved removing the random.c hardcoded list entries and adding a compat ioctl function pointer to the random.c fops. In the process, urandom was forgotten about, so this commit fixes that oversight. Fixes: 507e4e2b430b ("compat_ioctl: remove /dev/random commands") Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20191217172455.186395-1-Jason@zx2c4.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playgroundLinus Torvalds1-0/+1
Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...
2019-11-16Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-3/+1
Pull crypto fix from Herbert Xu: "This reverts a number of changes to the khwrng thread which feeds the kernel random number pool from hwrng drivers. They were trying to fix issues with suspend-and-resume but ended up causing regressions" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: Revert "hwrng: core - Freeze khwrng thread during suspend"
2019-11-17Revert "hwrng: core - Freeze khwrng thread during suspend"Herbert Xu1-3/+1
This reverts commit 03a3bb7ae631 ("hwrng: core - Freeze khwrng thread during suspend"), ff296293b353 ("random: Support freezable kthreads in add_hwgenerator_randomness()") and 59b569480dc8 ("random: Use wait_event_freezable() in add_hwgenerator_randomness()"). These patches introduced regressions and we need more time to get them ready for mainline. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-10-23compat_ioctl: remove /dev/random commandsArnd Bergmann1-0/+1
These are all handled by the random driver, so instead of listing each ioctl, we can use the generic compat_ptr_ioctl() helper. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-10-02char/random: Add a newline at the end of the fileBorislav Petkov1-1/+1
On Tue, Oct 01, 2019 at 10:14:40AM -0700, Linus Torvalds wrote: > The previous state of the file didn't have that 0xa at the end, so you get that > > > -EXPORT_SYMBOL_GPL(add_bootloader_randomness); > \ No newline at end of file > +EXPORT_SYMBOL_GPL(add_bootloader_randomness); > > which is "the '-' line doesn't have a newline, the '+' line does" marker. Aaha, that makes total sense, thanks for explaining. Oh well, let's fix it then so that people don't scratch heads like me. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-29Merge branch 'entropy'Linus Torvalds1-1/+61
Merge active entropy generation updates. This is admittedly partly "for discussion". We need to have a way forward for the boot time deadlocks where user space ends up waiting for more entropy, but no entropy is forthcoming because the system is entirely idle just waiting for something to happen. While this was triggered by what is arguably a user space bug with GDM/gnome-session asking for secure randomness during early boot, when they didn't even need any such truly secure thing, the issue ends up being that our "getrandom()" interface is prone to that kind of confusion, because people don't think very hard about whether they want to block for sufficient amounts of entropy. The approach here-in is to decide to not just passively wait for entropy to happen, but to start actively collecting it if it is missing. This is not necessarily always possible, but if the architecture has a CPU cycle counter, there is a fair amount of noise in the exact timings of reasonably complex loads. We may end up tweaking the load and the entropy estimates, but this should be at least a reasonable starting point. As part of this, we also revert the revert of the ext4 IO pattern improvement that ended up triggering the reported lack of external entropy. * getrandom() active entropy waiting: Revert "Revert "ext4: make __ext4_get_inode_loc plug"" random: try to actively add entropy rather than passively wait for it
2019-09-29random: try to actively add entropy rather than passively wait for itLinus Torvalds1-1/+61
For 5.3 we had to revert a nice ext4 IO pattern improvement, because it caused a bootup regression due to lack of entropy at bootup together with arguably broken user space that was asking for secure random numbers when it really didn't need to. See commit 72dbcf721566 (Revert "ext4: make __ext4_get_inode_loc plug"). This aims to solve the issue by actively generating entropy noise using the CPU cycle counter when waiting for the random number generator to initialize. This only works when you have a high-frequency time stamp counter available, but that's the case on all modern x86 CPU's, and on most other modern CPU's too. What we do is to generate jitter entropy from the CPU cycle counter under a somewhat complex load: calling the scheduler while also guaranteeing a certain amount of timing noise by also triggering a timer. I'm sure we can tweak this, and that people will want to look at other alternatives, but there's been a number of papers written on jitter entropy, and this should really be fairly conservative by crediting one bit of entropy for every timer-induced jump in the cycle counter. Not because the timer itself would be all that unpredictable, but because the interaction between the timer and the loop is going to be. Even if (and perhaps particularly if) the timer actually happens on another CPU, the cacheline interaction between the loop that reads the cycle counter and the timer itself firing is going to add perturbations to the cycle counter values that get mixed into the entropy pool. As Thomas pointed out, with a modern out-of-order CPU, even quite simple loops show a fair amount of hard-to-predict timing variability even in the absense of external interrupts. But this tries to take that further by actually having a fairly complex interaction. This is not going to solve the entropy issue for architectures that have no CPU cycle counter, but it's not clear how (and if) that is solvable, and the hardware in question is largely starting to be irrelevant. And by doing this we can at least avoid some of the even more contentious approaches (like making the entropy waiting time out in order to avoid the possibly unbounded waiting). Cc: Ahmed Darwish <darwish.07@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Nicholas Mc Guire <hofrat@opentech.at> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Willy Tarreau <w@1wt.eu> Cc: Alexander E. Patrakov <patrakov@gmail.com> Cc: Lennart Poettering <mzxreary@0pointer.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-18Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-1/+3
Pull crypto updates from Herbert Xu: "API: - Add the ability to abort a skcipher walk. Algorithms: - Fix XTS to actually do the stealing. - Add library helpers for AES and DES for single-block users. - Add library helpers for SHA256. - Add new DES key verification helper. - Add surrounding bits for ESSIV generator. - Add accelerations for aegis128. - Add test vectors for lzo-rle. Drivers: - Add i.MX8MQ support to caam. - Add gcm/ccm/cfb/ofb aes support in inside-secure. - Add ofb/cfb aes support in media-tek. - Add HiSilicon ZIP accelerator support. Others: - Fix potential race condition in padata. - Use unbound workqueues in padata" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (311 commits) crypto: caam - Cast to long first before pointer conversion crypto: ccree - enable CTS support in AES-XTS crypto: inside-secure - Probe transform record cache RAM sizes crypto: inside-secure - Base RD fetchcount on actual RD FIFO size crypto: inside-secure - Base CD fetchcount on actual CD FIFO size crypto: inside-secure - Enable extended algorithms on newer HW crypto: inside-secure: Corrected configuration of EIP96_TOKEN_CTRL crypto: inside-secure - Add EIP97/EIP197 and endianness detection padata: remove cpu_index from the parallel_queue padata: unbind parallel jobs from specific CPUs padata: use separate workqueues for parallel and serial work padata, pcrypt: take CPU hotplug lock internally in padata_alloc_possible crypto: pcrypt - remove padata cpumask notifier padata: make padata_do_parallel find alternate callback CPU workqueue: require CPU hotplug read exclusion for apply_workqueue_attrs workqueue: unconfine alloc/apply/free_workqueue_attrs() padata: allocate workqueue internally arm64: dts: imx8mq: Add CAAM node random: Use wait_event_freezable() in add_hwgenerator_randomness() crypto: ux500 - Fix COMPILE_TEST warnings ...
2019-09-09random: Use wait_event_freezable() in add_hwgenerator_randomness()Stephen Boyd1-7/+5
Sebastian reports that after commit ff296293b353 ("random: Support freezable kthreads in add_hwgenerator_randomness()") we can call might_sleep() when the task state is TASK_INTERRUPTIBLE (state=1). This leads to the following warning. do not call blocking ops when !TASK_RUNNING; state=1 set at [<00000000349d1489>] prepare_to_wait_event+0x5a/0x180 WARNING: CPU: 0 PID: 828 at kernel/sched/core.c:6741 __might_sleep+0x6f/0x80 Modules linked in: CPU: 0 PID: 828 Comm: hwrng Not tainted 5.3.0-rc7-next-20190903+ #46 RIP: 0010:__might_sleep+0x6f/0x80 Call Trace: kthread_freezable_should_stop+0x1b/0x60 add_hwgenerator_randomness+0xdd/0x130 hwrng_fillfn+0xbf/0x120 kthread+0x10c/0x140 ret_from_fork+0x27/0x50 We shouldn't call kthread_freezable_should_stop() from deep within the wait_event code because the task state is still set as TASK_INTERRUPTIBLE instead of TASK_RUNNING and kthread_freezable_should_stop() will try to call into the freezer with the task in the wrong state. Use wait_event_freezable() instead so that it calls schedule() in the right place and tries to enter the freezer when the task state is TASK_RUNNING instead. Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Keerthy <j-keerthy@ti.com> Fixes: ff296293b353 ("random: Support freezable kthreads in add_hwgenerator_randomness()") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-23fdt: add support for rng-seedHsin-Yi Wang1-0/+14
Introducing a chosen node, rng-seed, which is an entropy that can be passed to kernel called very early to increase initial device randomness. Bootloader should provide this entropy and the value is read from /chosen/rng-seed in DT. Obtain of_fdt_crc32 for CRC check after early_init_dt_scan_nodes(), since early_init_dt_scan_chosen() would modify fdt to erase rng-seed. Add a new interface add_bootloader_randomness() for rng-seed use case. Depends on whether the seed is trustworthy, rng seed would be passed to add_hwgenerator_randomness(). Otherwise it would be passed to add_device_randomness(). Decision is controlled by kernel config RANDOM_TRUST_BOOTLOADER. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> # drivers/char/random.c Signed-off-by: Will Deacon <will@kernel.org>
2019-08-22random: Support freezable kthreads in add_hwgenerator_randomness()Stephen Boyd1-3/+7
The kthread calling this function is freezable after commit 03a3bb7ae631 ("hwrng: core - Freeze khwrng thread during suspend") is applied. Unfortunately, this function uses wait_event_interruptible() but doesn't check for the kthread being woken up by the fake freezer signal. When a user suspends the system, this kthread will wake up and if it fails the entropy size check it will immediately go back to sleep and not go into the freezer. Eventually, suspend will fail because the task never froze and a warning message like this may appear: PM: suspend entry (deep) Filesystems sync: 0.000 seconds Freezing user space processes ... (elapsed 0.001 seconds) done. OOM killer disabled. Freezing remaining freezable tasks ... Freezing of tasks failed after 20.003 seconds (1 tasks refusing to freeze, wq_busy=0): hwrng R running task 0 289 2 0x00000020 [<c08c64c4>] (__schedule) from [<c08c6a10>] (schedule+0x3c/0xc0) [<c08c6a10>] (schedule) from [<c05dbd8c>] (add_hwgenerator_randomness+0xb0/0x100) [<c05dbd8c>] (add_hwgenerator_randomness) from [<bf1803c8>] (hwrng_fillfn+0xc0/0x14c [rng_core]) [<bf1803c8>] (hwrng_fillfn [rng_core]) from [<c015abec>] (kthread+0x134/0x148) [<c015abec>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Check for a freezer signal here and skip adding any randomness if the task wakes up because it was frozen. This should make the kthread freeze properly and suspend work again. Fixes: 03a3bb7ae631 ("hwrng: core - Freeze khwrng thread during suspend") Reported-by: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-26random: fix soft lockup when trying to read from an uninitialized blocking poolTheodore Ts'o1-3/+13
Fixes: eb9d1bf079bb: "random: only read from /dev/random after its pool has received 128 bits" Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-20random: add a spinlock_t to struct batched_entropySebastian Andrzej Siewior1-25/+27
The per-CPU variable batched_entropy_uXX is protected by get_cpu_var(). This is just a preempt_disable() which ensures that the variable is only from the local CPU. It does not protect against users on the same CPU from another context. It is possible that a preemptible context reads slot 0 and then an interrupt occurs and the same value is read again. The above scenario is confirmed by lockdep if we add a spinlock: | ================================ | WARNING: inconsistent lock state | 5.1.0-rc3+ #42 Not tainted | -------------------------------- | inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. | ksoftirqd/9/56 [HC0[0]:SC1[1]:HE0:SE0] takes: | (____ptrval____) (batched_entropy_u32.lock){+.?.}, at: get_random_u32+0x3e/0xe0 | {SOFTIRQ-ON-W} state was registered at: | _raw_spin_lock+0x2a/0x40 | get_random_u32+0x3e/0xe0 | new_slab+0x15c/0x7b0 | ___slab_alloc+0x492/0x620 | __slab_alloc.isra.73+0x53/0xa0 | kmem_cache_alloc_node+0xaf/0x2a0 | copy_process.part.41+0x1e1/0x2370 | _do_fork+0xdb/0x6d0 | kernel_thread+0x20/0x30 | kthreadd+0x1ba/0x220 | ret_from_fork+0x3a/0x50 … | other info that might help us debug this: | Possible unsafe locking scenario: | | CPU0 | ---- | lock(batched_entropy_u32.lock); | <Interrupt> | lock(batched_entropy_u32.lock); | | *** DEADLOCK *** | | stack backtrace: | Call Trace: … | kmem_cache_alloc_trace+0x20e/0x270 | ipmi_alloc_recv_msg+0x16/0x40 … | __do_softirq+0xec/0x48d | run_ksoftirqd+0x37/0x60 | smpboot_thread_fn+0x191/0x290 | kthread+0xfe/0x130 | ret_from_fork+0x3a/0x50 Add a spinlock_t to the batched_entropy data structure and acquire the lock while accessing it. Acquire the lock with disabled interrupts because this function may be used from interrupt context. Remove the batched_entropy_reset_lock lock. Now that we have a lock for the data scructure, we can access it from a remote CPU. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-19random: document get_random_int() familyGeorge Spelvin1-7/+76
Explain what these functions are for and when they offer an advantage over get_random_bytes(). (We still need documentation on rng_is_initialized(), the random_ready_callback system, and early boot in general.) Signed-off-by: George Spelvin <lkml@sdf.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-19random: fix CRNG initialization when random.trust_cpu=1Jon DeVree1-1/+4
When the system boots with random.trust_cpu=1 it doesn't initialize the per-NUMA CRNGs because it skips the rest of the CRNG startup code. This means that the code from 1e7f583af67b ("random: make /dev/urandom scalable for silly userspace programs") is not used when random.trust_cpu=1. crash> dmesg | grep random: [ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x530 with crng_init=0 [ 0.314029] random: crng done (trusting CPU's manufacturer) crash> print crng_node_pool $6 = (struct crng_state **) 0x0 After adding the missing call to numa_crng_init() the per-NUMA CRNGs are initialized again: crash> dmesg | grep random: [ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x530 with crng_init=0 [ 0.314031] random: crng done (trusting CPU's manufacturer) crash> print crng_node_pool $1 = (struct crng_state **) 0xffff9a915f4014a0 The call to invalidate_batched_entropy() was also missing. This is important for architectures like PPC and S390 which only have the arch_get_random_seed_* functions. Fixes: 39a8883a2b98 ("random: add a config option to trust the CPU's hwrng") Signed-off-by: Jon DeVree <nuxi@vault24.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-19random: move rand_initialize() earlierKees Cook1-3/+2
Right now rand_initialize() is run as an early_initcall(), but it only depends on timekeeping_init() (for mixing ktime_get_real() into the pools). However, the call to boot_init_stack_canary() for stack canary initialization runs earlier, which triggers a warning at boot: random: get_random_bytes called from start_kernel+0x357/0x548 with crng_init=0 Instead, this moves rand_initialize() to after timekeeping_init(), and moves canary initialization here as well. Note that this warning may still remain for machines that do not have UEFI RNG support (which initializes the RNG pools during setup_arch()), or for x86 machines without RDRAND (or booting without "random.trust=on" or CONFIG_RANDOM_TRUST_CPU=y). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-17random: only read from /dev/random after its pool has received 128 bitsTheodore Ts'o1-22/+22
Immediately after boot, we allow reads from /dev/random before its entropy pool has been fully initialized. Fix this so that we don't allow this until the blocking pool has received 128 bits. We do this by repurposing the initialized flag in the entropy pool struct, and use the initialized flag in the blocking pool to indicate whether it is safe to pull from the blocking pool. To do this, we needed to rework when we decide to push entropy from the input pool to the blocking pool, since the initialized flag for the input pool was used for this purpose. To simplify things, we no longer use the initialized flag for that purpose, nor do we use the entropy_total field any more. Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-17drivers/char/random.c: make primary_crng staticRasmus Villemoes1-1/+1
Since the definition of struct crng_state is private to random.c, and primary_crng is neither declared or used elsewhere, there's no reason for that symbol to have external linkage. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-17drivers/char/random.c: remove unused stuct poolinfo::poolbitsRasmus Villemoes1-3/+3
This field is never used, might as well remove it. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-17drivers/char/random.c: constify poolinfo_tableRasmus Villemoes1-1/+1
Never modified, might as well be put in .rodata. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-11-20crypto: chacha20-generic - refactor to allow varying number of roundsEric Biggers1-26/+25
In preparation for adding XChaCha12 support, rename/refactor chacha20-generic to support different numbers of rounds. The justification for needing XChaCha12 support is explained in more detail in the patch "crypto: chacha - add XChaCha12 support". The only difference between ChaCha{8,12,20} are the number of rounds itself; all other parts of the algorithm are the same. Therefore, remove the "20" from all definitions, structures, functions, files, etc. that will be shared by all ChaCha versions. Also make ->setkey() store the round count in the chacha_ctx (previously chacha20_ctx). The generic code then passes the round count through to chacha_block(). There will be a ->setkey() function for each explicitly allowed round count; the encrypt/decrypt functions will be the same. I decided not to do it the opposite way (same ->setkey() function for all round counts, with different encrypt/decrypt functions) because that would have required more boilerplate code in architecture-specific implementations of ChaCha and XChaCha. Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Martin Willi <martin@strongswan.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-10-25Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-12/+12
Pull crypto updates from Herbert Xu: "API: - Remove VLA usage - Add cryptostat user-space interface - Add notifier for new crypto algorithms Algorithms: - Add OFB mode - Remove speck Drivers: - Remove x86/sha*-mb as they are buggy - Remove pcbc(aes) from x86/aesni - Improve performance of arm/ghash-ce by up to 85% - Implement CTS-CBC in arm64/aes-blk, faster by up to 50% - Remove PMULL based arm64/crc32 driver - Use PMULL in arm64/crct10dif - Add aes-ctr support in s5p-sss - Add caam/qi2 driver Others: - Pick better transform if one becomes available in crc-t10dif" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits) crypto: chelsio - Update ntx queue received from cxgb4 crypto: ccree - avoid implicit enum conversion crypto: caam - add SPDX license identifier to all files crypto: caam/qi - simplify CGR allocation, freeing crypto: mxs-dcp - make symbols 'sha1_null_hash' and 'sha256_null_hash' static crypto: arm64/aes-blk - ensure XTS mask is always loaded crypto: testmgr - fix sizeof() on COMP_BUF_SIZE crypto: chtls - remove set but not used variable 'csk' crypto: axis - fix platform_no_drv_owner.cocci warnings crypto: x86/aes-ni - fix build error following fpu template removal crypto: arm64/aes - fix handling sub-block CTS-CBC inputs crypto: caam/qi2 - avoid double export crypto: mxs-dcp - Fix AES issues crypto: mxs-dcp - Fix SHA null hashes and output length crypto: mxs-dcp - Implement sha import/export crypto: aegis/generic - fix for big endian systems crypto: morus/generic - fix for big endian systems crypto: lrw - fix rebase error after out of bounds fix crypto: cavium/nitrox - use pci_alloc_irq_vectors() while enabling MSI-X. crypto: cavium/nitrox - NITROX command queue changes. ...
2018-09-21crypto: chacha20 - Fix chacha20_block() keystream alignment (again)Eric Biggers1-12/+12
In commit 9f480faec58c ("crypto: chacha20 - Fix keystream alignment for chacha20_block()"), I had missed that chacha20_block() can be called directly on the buffer passed to get_random_bytes(), which can have any alignment. So, while my commit didn't break anything, it didn't fully solve the alignment problems. Revert my solution and just update chacha20_block() to use put_unaligned_le32(), so the output buffer need not be aligned. This is simpler, and on many CPUs it's the same speed. But, I kept the 'tmp' buffers in extract_crng_user() and _get_random_bytes() 4-byte aligned, since that alignment is actually needed for _crng_backtrack_protect() too. Reported-by: Stephan Müller <smueller@chronox.de> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-01random: make CPU trust a boot parameterKees Cook1-3/+8
Instead of forcing a distro or other system builder to choose at build time whether the CPU is trusted for CRNG seeding via CONFIG_RANDOM_TRUST_CPU, provide a boot-time parameter for end users to control the choice. The CONFIG will set the default state instead. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-08-02random: Make crng state queryableJason A. Donenfeld1-0/+15
It is very useful to be able to know whether or not get_random_bytes_wait / wait_for_random_bytes is going to block or not, or whether plain get_random_bytes is going to return good randomness or bad randomness. The particular use case is for mitigating certain attacks in WireGuard. A handshake packet arrives and is queued up. Elsewhere a worker thread takes items from the queue and processes them. In replying to these items, it needs to use some random data, and it has to be good random data. If we simply block until we can have good randomness, then it's possible for an attacker to fill the queue up with packets waiting to be processed. Upon realizing the queue is full, WireGuard will detect that it's under a denial of service attack, and behave accordingly. A better approach is just to drop incoming handshake packets if the crng is not yet initialized. This patch, therefore, makes that information directly accessible. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-07-24random: remove preempt disabled regionIngo Molnar1-4/+0
No need to keep preemption disabled across the whole function. mix_pool_bytes() uses a spin_lock() to protect the pool and there are other places like write_pool() whhich invoke mix_pool_bytes() without disabling preemption. credit_entropy_bits() is invoked from other places like add_hwgenerator_randomness() without disabling preemption. Before commit 95b709b6be49 ("random: drop trickle mode") the function used __this_cpu_inc_return() which would require disabled preemption. The preempt_disable() section was added in commit 43d5d3018c37 ("[PATCH] random driver preempt robustness", history tree). It was claimed that the code relied on "vt_ioctl() being called under BKL". Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [bigeasy: enhance the commit message] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-07-24random: add a config option to trust the CPU's hwrngTheodore Ts'o1-1/+10
This gives the user building their own kernel (or a Linux distribution) the option of deciding whether or not to trust the CPU's hardware random number generator (e.g., RDRAND for x86 CPU's) as being correctly implemented and not having a back door introduced (perhaps courtesy of a Nation State's law enforcement or intelligence agencies). This will prevent getrandom(2) from blocking, if there is a willingness to trust the CPU manufacturer. Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-07-17random: Return nbytes filled from hw RNGTobin C. Harding1-7/+9
Currently the function get_random_bytes_arch() has return value 'void'. If the hw RNG fails we currently fall back to using get_random_bytes(). This defeats the purpose of requesting random material from the hw RNG in the first place. There are currently no intree users of get_random_bytes_arch(). Only get random bytes from the hw RNG, make function return the number of bytes retrieved from the hw RNG. Acked-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Tobin C. Harding <me@tobin.cc> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-07-17random: Fix whitespace pre random-bytes workTobin C. Harding1-2/+1
There are a couple of whitespace issues around the function get_random_bytes_arch(). In preparation for patching this function let's clean them up. Acked-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Tobin C. Harding <me@tobin.cc> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-07-17random: mix rdrand with entropy sent in from userspaceTheodore Ts'o1-1/+9
Fedora has integrated the jitter entropy daemon to work around slow boot problems, especially on VM's that don't support virtio-rng: https://bugzilla.redhat.com/show_bug.cgi?id=1572944 It's understandable why they did this, but the Jitter entropy daemon works fundamentally on the principle: "the CPU microarchitecture is **so** complicated and we can't figure it out, so it *must* be random". Yes, it uses statistical tests to "prove" it is secure, but AES_ENCRYPT(NSA_KEY, COUNTER++) will also pass statistical tests with flying colors. So if RDRAND is available, mix it into entropy submitted from userspace. It can't hurt, and if you believe the NSA has backdoored RDRAND, then they probably have enough details about the Intel microarchitecture that they can reverse engineer how the Jitter entropy daemon affects the microarchitecture, and attack its output stream. And if RDRAND is in fact an honest DRNG, it will immeasurably improve on what the Jitter entropy daemon might produce. This also provides some protection against someone who is able to read or set the entropy seed file. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de>
2018-06-28Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLLLinus Torvalds1-16/+13
The poll() changes were not well thought out, and completely unexplained. They also caused a huge performance regression, because "->poll()" was no longer a trivial file operation that just called down to the underlying file operations, but instead did at least two indirect calls. Indirect calls are sadly slow now with the Spectre mitigation, but the performance problem could at least be largely mitigated by changing the "->get_poll_head()" operation to just have a per-file-descriptor pointer to the poll head instead. That gets rid of one of the new indirections. But that doesn't fix the new complexity that is completely unwarranted for the regular case. The (undocumented) reason for the poll() changes was some alleged AIO poll race fixing, but we don't make the common case slower and more complex for some uncommon special case, so this all really needs way more explanations and most likely a fundamental redesign. [ This revert is a revert of about 30 different commits, not reverted individually because that would just be unnecessarily messy - Linus ] Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-26random: convert to ->poll_maskChristoph Hellwig1-13/+16
The big change is that random_read_wait and random_write_wait are merged into a single waitqueue that uses keyed wakeups. Because wait_event_* doesn't know about that this will lead to occassional spurious wakeups in _random_read and add_hwgenerator_randomness, but wait_event_* is designed to handle these and were are not in a a hot path there. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25random: rate limit unseeded randomness warningsTheodore Ts'o1-5/+34
On systems without sufficient boot randomness, no point spamming dmesg. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2018-04-24random: fix possible sleeping allocation from irq contextTheodore Ts'o1-1/+8
We can do a sleeping allocation from an irq context when CONFIG_NUMA is enabled. Fix this by initializing the NUMA crng instances in a workqueue. Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot+9de458f6a5e713ee8c1a@syzkaller.appspotmail.com Fixes: 8ef35c866f8862df ("random: set up the NUMA crng instances...") Cc: stable@vger.kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-04-14random: add new ioctl RNDRESEEDCRNGTheodore Ts'o1-1/+12
Add a new ioctl which forces the the crng to be reseeded. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.