aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/char/tpm/Makefile (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-06-25tpm/tpm_tis_spi: Add support for spi phyChristophe Ricard1-0/+1
Spi protocol standardized by the TCG is now supported by most of TPM vendors. It supports SPI Bit Protocol as describe in the TCG PTP specification (chapter 6.4.6 SPI Bit Protocol). Irq mode is not supported. This commit is based on the initial work by Peter Huewe. Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm/tpm_tis: Split tpm_tis driver into a core and TCG TIS compliant phyChristophe Ricard1-0/+1
To avoid code duplication between the old tpm_tis and the new and future native tcg tis driver(ie: spi, i2c...), the tpm_tis driver was reworked, so that all common logic is extracted and can be reused from all drivers. The core methods can also be used from other TIS like drivers. itpm workaround is now managed with a specific tis flag TPM_TIS_ITPM_POSSIBLE. This commit is based on the initial work by Peter Huewe. Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm: Proxy driver for supporting multiple emulated TPMsStefan Berger1-0/+1
This patch implements a proxy driver for supporting multiple emulated TPMs in a system. The driver implements a device /dev/vtpmx that is used to created a client device pair /dev/tpmX (e.g., /dev/tpm10) and a server side that is accessed using a file descriptor returned by an ioctl. The device /dev/tpmX is the usual TPM device created by the core TPM driver. Applications or kernel subsystems can send TPM commands to it and the corresponding server-side file descriptor receives these commands and delivers them to an emulated TPM. The driver retrievs the TPM 1.2 durations and timeouts. Since this requires the startup of the TPM, we send a startup for TPM 1.2 as well as TPM 2. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> CC: linux-kernel@vger.kernel.org CC: linux-doc@vger.kernel.org CC: linux-api@vger.kernel.org Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2015-03-18tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy)Christophe Ricard1-1/+1
tpm_i2c_stm_st33 is a TIS 1.2 TPM with a core interface which can be used by different phy such as i2c or spi. The core part is called st33zp24 which is also the main part reference. include/linux/platform_data/tpm_stm_st33.h is renamed consequently. The driver is also split into an i2c phy in charge of sending/receiving data as well as managing platform data or dts configuration. Acked-by: Jarkko Sakkinen <jarkko.sakknen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jason.gunthorpe@obsidianresearch.com> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-01-17tpm: TPM 2.0 CRB InterfaceJarkko Sakkinen1-0/+1
tpm_crb is a driver for TPM 2.0 Command Response Buffer (CRB) Interface as defined in PC Client Platform TPM Profile (PTP) Specification. Only polling and single locality is supported as these are the limitations of the available hardware, Platform Trust Techonlogy (PTT) in Haswell CPUs. The driver always applies CRB with ACPI start because PTT reports using only ACPI start as start method but as a result of my testing it requires also CRB start. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jasob Gunthorpe <jason.gunthorpe@obsidianresearch.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-01-17tpm: TPM 2.0 baseline supportJarkko Sakkinen1-1/+1
TPM 2.0 devices are separated by adding a field 'flags' to struct tpm_chip and defining a flag TPM_CHIP_FLAG_TPM2 for tagging them. This patch adds the following internal functions: - tpm2_get_random() - tpm2_get_tpm_pt() - tpm2_pcr_extend() - tpm2_pcr_read() - tpm2_startup() Additionally, the following exported functions are implemented for implementing TPM 2.0 device drivers: - tpm2_do_selftest() - tpm2_calc_ordinal_durations() - tpm2_gen_interrupt() The existing functions that are exported for the use for existing subsystems have been changed to check the flags field in struct tpm_chip and use appropriate TPM 2.0 counterpart if TPM_CHIP_FLAG_TPM2 is est. The code for tpm2_calc_ordinal_duration() and tpm2_startup() were originally written by Will Arthur. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Will Arthur <will.c.arthur@intel.com> Reviewed-by: Jasob Gunthorpe <jason.gunthorpe@obsidianresearch.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Tested-by: Peter Huewe <peterhuewe@gmx.de> [phuewe: Fixed copy paste error * 2] Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-01-17tpm: two-phase chip management functionsJarkko Sakkinen1-1/+1
tpm_register_hardware() and tpm_remove_hardware() are called often before initializing the device. The problem is that the device might not be fully initialized when it comes visible to the user space. This patch resolves the issue by diving initialization into two parts: - tpmm_chip_alloc() creates struct tpm_chip. - tpm_chip_register() sets up the character device and sysfs attributes. The framework takes care of freeing struct tpm_chip by using the devres API. The broken release callback has been wiped. ACPI drivers do not ever get this callback. Regards to Jason Gunthorpe for carefully reviewing this part of the code. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jasob Gunthorpe <jason.gunthorpe@obsidianresearch.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Tested-by: Scot Doyle <lkml14@scotdoyle.com> Tested-by: Peter Huewe <peterhuewe@gmx.de> [phuewe: update to upstream changes] Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-01-17tpm/tpm_i2c_stm_st33: Update Kconfig in order to be inline to other similar productChristophe Ricard1-1/+1
STMicroelectronics i2c tpm is the only one to have a different tristate label. Rename it "TPM Interface Specification 1.2 Interface (I2C - STMicroelectronics)" Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> [phuewe: corrected module name in the helptext] Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06tpm: Move sysfs functions from tpm-interface to tpm-sysfsJason Gunthorpe1-1/+1
CLASS-sysfs.c is a common idiom for linux subsystems. This is the first step to pulling all the sysfs support code from the drivers into tpm-sysfs. This is a plain text copy from tpm-interface with support changes to make it compile. _tpm_pcr_read is made non-static and is called tpm_pcr_read_dev. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06tpm: Pull everything related to /dev/tpmX into tpm-dev.cJason Gunthorpe1-1/+1
CLASS-dev.c is a common idiom for Linux subsystems This pulls all the code related to the miscdev into tpm-dev.c and makes it static. The identical file_operation structs in the drivers are purged and the tpm common code unconditionally creates the miscdev. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com> Reviewed-by: Ashley Lai <adlai@linux.vnet.ibm.com> [phuewe: tpm_dev_release is now used only in this file, thus the EXPORT_SYMBOL can be dropped and the function be marked as static. It has no other in-kernel users] Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2013-10-22tpm: Add support for Atmel I2C TPMsJason Gunthorpe1-0/+1
This is based on the work of Teddy Reed <teddy@prosauce.org> published on GitHub: https://github.com/theopolis/tpm-i2c-atmel.git 34894b988b67e0ae55088d6388e77b0dbf10c07d That driver was never merged, I have taken it as a starting port, forward ported, tested and revised the driver: - Make it broadly textually similar to the Infineon and Nuvoton I2C driver - Place everything in a format suitable for mainline inclusion - Use high level I2C functions i2c_master_send and i2c_master_recv for data xfer - Use the timeout system from the core code, by faking out a status register - Only I2C transfer the number of bytes in the reply, not a fixed message size. - checkpatch cleanups - Testing on ARM Kirkwood, with this device tree, using a AT97SC3204T-X1A180 tpm@29 { compatible = "atmel,at97sc3204t"; reg = <0x29>; }; Signed-off-by: Teddy Reed <teddy@prosauce.org> [jgg: revised and tested] Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [phuewe: minor whitespace changes] Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2013-10-22tpm: Add support for the Nuvoton NPCT501 I2C TPMJason Gunthorpe1-0/+1
This chip is/was also branded as a Winbond WPCT301. Originally written by Dan Morav <dmorav@nuvoton.com> and posted to LKML: https://lkml.org/lkml/2011/9/7/206 The original posting was not merged, I have taken it as a starting point, forward ported, tested and revised the driver: - Rework interrupt handling to work properly with level triggered interrupts. The old version just locked up. - Synchronize various items with Peter Huewe's Infineon driver: * Add durations/timeouts sysfs calls * Remove I2C device auto-detection * Don't fiddle with chip->release * Call tpm_dev_vendor_release in the probe error path * Use MODULE_DEVICE_TABLE for the I2C ids * Provide OF compatible strings for DT support * Use SIMPLE_DEV_PM_OPS * Use module_i2c_driver - checkpatch cleanups - Testing on ARM Kirkwood with GPIO interrupts, with this device tree: tpm@57 { compatible = "nuvoton,npct501"; reg = <0x57>; interrupt-parent = <&gpio1>; interrupts = <6 IRQ_TYPE_LEVEL_LOW>; }; Signed-off-by: Dan Morav <dmorav@nuvoton.com> [jgg: revised and tested] Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [phuewe: minor whitespace changes, fixed module name in kconfig] Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2013-10-22tpm: Merge the tpm-bios module with tpm.oJason Gunthorpe1-4/+3
Now that we can have multiple .c files in the tpm module there is no reason for tpm-bios. tpm-bios exported several functions: tpm_bios_log_setup, tpm_bios_log_teardown, tpm_add_ppi, and tpm_remove_ppi. They are only used by tpm, and if tpm-bios is built then tpm will unconditionally require them. Further, tpm-bios does nothing on its own, it has no module_init function. Thus we remove the exports and merge the modules to simplify things. The Makefile conditions are changed slightly to match the code, tpm_ppi is always required if CONFIG_ACPI is set. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
2013-10-22tpm: Rename tpm.c to tpm-interface.cJason Gunthorpe1-0/+2
This is preparation for making the tpm module multi-file. kbuild does not like having a .c file with the same name as a module. We wish to keep the tpm module name so that userspace doesn't see this change. tpm-interface.c is chosen because the next several commits in the series migrate items into tpm-sysfs.c, tpm-dev.c and tpm-class.c. All that will be left is tpm command processing and interfacing code. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
2013-08-09drivers/tpm: add xen tpmfront interfaceDaniel De Graaf1-0/+1
This is a complete rewrite of the Xen TPM frontend driver, taking advantage of a simplified frontend/backend interface and adding support for cancellation and timeouts. The backend for this driver is provided by a vTPM stub domain using the interface in Xen 4.3. Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov> Acked-by: Matthew Fioravante <matthew.fioravante@jhuapl.edu> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Peter Huewe <peterhuewe@gmx.de> Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-05TPM: STMicroelectronics ST33 I2C BUILD STUFFMathias Leblanc1-0/+1
* STMicroelectronics version 1.2.0, Copyright (C) 2010 * STMicroelectronics comes with ABSOLUTELY NO WARRANTY. * This is free software, and you are welcome to redistribute it * under certain conditions. This is the driver for TPM chip from ST Microelectronics. If you have a TPM security chip from STMicroelectronics working with an I2C, in menuconfig or .config choose the tpm driver on device --> tpm and activate the protocol of your choice before compiling the kernel. The driver will be accessible from within Linux. Tested on linux x86/x64, beagleboard REV B & XM REV C and CHROMIUM OS Signed-off-by: Mathias Leblanc <mathias.leblanc@st.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2012-08-22driver: add PPI support in tpm driverXiaoyan Zhang1-1/+1
The Physical Presence Interface enables the OS and the BIOS to cooperate and provides a simple and straightforward platform user experience for administering the TPM without sacrificing security. V2: separate the patch out in a separate source file, add #ifdef CONFIG_ACPI so it compiles out on ppc, use standard error instead of ACPI error as return code of show/store fns. V3: move #ifdef CONFIG_ACPI from .c file to .h file. V4: move tpm_ppi code from tpm module to tpm_bios module. V5: modify sys_add_ppi() so that ppi_attr_grp doesn't need to be exported Signed-off-by: Xiaoyan Zhang <xiaoyan.zhang@intel.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2012-08-22drivers/char/tpm: Add securityfs support for event logAshley Lai1-0/+5
This patch retrieves the event log data from the device tree during file open. The event log data will then displayed through securityfs. Signed-off-by: Ashley Lai <adlai@us.ibm.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2012-08-22drivers/char/tpm: Add new device driver to support IBM vTPMAshley Lai1-0/+1
This patch adds a new device driver to support IBM virtual TPM (vTPM) for PPC64. IBM vTPM is supported through the adjunct partition with firmware release 740 or higher. With vTPM support, each lpar is able to have its own vTPM without the physical TPM hardware. This driver provides TPM functionalities by communicating with the vTPM adjunct partition through Hypervisor calls (Hcalls) and Command/Response Queue (CRQ) commands. Signed-off-by: Ashley Lai <adlai@us.ibm.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2012-08-22tpm: modularize event log collectionKent Yoder1-0/+1
Break ACPI-specific pieces of the event log handling into their own file and create tpm_eventlog.[ch] to store common event log handling code. This will be required to integrate future event log sources on platforms without ACPI tables. Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2012-08-22char/tpm: Add new driver for Infineon I2C TIS TPMPeter Huewe1-0/+1
This patch adds a driver to support Infineon's SLB 9635 TT 1.2 Soft I2C TPMs which follow the TGC TIS 1.2 TPM specification[1] and Infineon's I2C Protocol Stack Specification 0.20. The I2C Protocol Stack Specification is a simple adaption of the LPC TIS Protocol to the I2C Bus. The I2C TPMs can be used when LPC Bus is not available (i.e. non x86 architectures like ARM). The driver is based on the tpm_tis.c driver by Leendert van Dorn and Kyleen Hall and has quite similar functionality. Tested on Nvidia ARM Tegra2 Development Platform and Beagleboard (ARM OMAP) Tested with the Trousers[2] TSS API Testsuite v 0.3 [3] Compile-tested on x86 (32/64-bit) Updates since version 2.1.4: - included "Lock the I2C adapter for a sequence of requests", by Bryan Freed - use __i2c_transfer instead of own implementation of unlocked i2c_transfer - use struct dev_pm_ops for power management via SIMPLE_DEV_PM_OPS Updates since version 2.1.3: - use proper probing mechanism * either add the tpm using I2C_BOARD_INFO to your board file or probe it * during runtime e.g on BeagleBoard using : * "echo tpm_i2c_infineon 0x20 > /sys/bus/i2c/devices/i2c-2/new_device" - fix possible endless loop if hardware misbehaves - improved return codes - consistent spelling i2c/tpm -> I2C/TPM - remove hardcoded sleep values and msleep usage - removed debug statements - added check for I2C functionality - renaming to tpm_i2c_infineon Updates since version 2.1.2: - added sysfs entries for duration and timeouts - updated to new tpm_do_selftest Updates since version 2.1.0: - improved error handling - implemented workarounds needed by the tpm - fixed typos References: [1] http://www.trustedcomputinggroup.org/resources/pc_client_work_group_pc_client_ specific_tpm_interface_specification_tis_version_12/ [2] http://trousers.sourceforge.net/ [3] http://sourceforge.net/projects/trousers/files/TSS%20API%20test%20suite/0.3/ Reviewed-by: Andi Shyti <andi.shyti@gmail.com> Acked-by: Marcel Selhorst <tpmdd@selhorst.net> Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Signed-off-by: Bryan Freed <bfreed@chromium.org> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2006-04-22[PATCH] tpm: driver for next generation TPM chipsLeendert van Doorn1-0/+1
The driver for the next generation of TPM chips version 1.2 including support for interrupts. The Trusted Computing Group has written the TPM Interface Specification (TIS) which defines a common interface for all manufacturer's 1.2 TPM's thus the name tpm_tis. Signed-off-by: Leendert van Doorn <leendert@watson.ibm.com> Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08[PATCH] tpm: add bios measurement logKylene Jo Hall1-0/+3
According to the TCG specifications measurements or hashes of the BIOS code and data are extended into TPM PCRS and a log is kept in an ACPI table of these extensions for later validation if desired. This patch exports the values in the ACPI table through a security-fs seq_file. Signed-off-by: Seiji Munetoh <munetoh@jp.ibm.com> Signed-off-by: Stefan Berger <stefanb@us.ibm.com> Signed-off-by: Reiner Sailer <sailer@us.ibm.com> Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27[PATCH] tpm: Support for Infineon TPMMarcel Selhorst1-1/+1
This patch provides a new device driver for the Infineon SLD 9630 TT Trusted Platform Module (TPM 1.1b) [1] which is embedded on Intel- mainboards or in HP/ Fujitsu-Siemens / Toshiba-Notebooks. A nearly complete list where this module is integrated in can be found in [2]. This kernel module acts as a communication gateway between the linux kernel and the hardware chip and fits the TPM-specific interfaces created by IBM in drivers/char/tpm/tpm.h Further information about this module and a list of succesfully tested and therefore supported hardware can be found at our project page [3]. [1] http://www.infineon.com/cgi/ecrm.dll/ecrm/scripts/public_download.jsp?oid=114135&parent_oid=29049 [2] http://www.tonymcfadden.net/tpmvendors.htm [3] http://www.prosec.rub.de/tpm Signed-off-by: Marcel Selhorst <selhorst@crypto.rub.de> Acked-by: Kylene Jo Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds1-0/+7
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.