aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/char/tpm (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-10-05tpm: Restore functionality to xen vtpm driver.Dr. Greg Wettstein1-1/+1
Functionality of the xen-tpmfront driver was lost secondary to the introduction of xenbus multi-page support in commit ccc9d90a9a8b ("xenbus_client: Extend interface to support multi-page ring"). In this commit pointer to location of where the shared page address is stored was being passed to the xenbus_grant_ring() function rather then the address of the shared page itself. This resulted in a situation where the driver would attach to the vtpm-stubdom but any attempt to send a command to the stub domain would timeout. A diagnostic finding for this regression is the following error message being generated when the xen-tpmfront driver probes for a device: <3>vtpm vtpm-0: tpm_transmit: tpm_send: error -62 <3>vtpm vtpm-0: A TPM error (-62) occurred attempting to determine the timeouts This fix is relevant to all kernels from 4.1 forward which is the release in which multi-page xenbus support was introduced. Daniel De Graaf formulated the fix by code inspection after the regression point was located. Fixes: ccc9d90a9a8b ("xenbus_client: Extend interface to support multi-page ring") Signed-off-by: Dr. Greg Wettstein <greg@enjellic.com> [boris: Updated commit message, added Fixes tag] Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org # v4.1+ Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-10-05tpm: add support for nonblocking operationTadeusz Struk6-45/+137
Currently the TPM driver only supports blocking calls, which doesn't allow asynchronous IO operations to the TPM hardware. This patch changes it and adds support for nonblocking write and a new poll function to enable applications, which want to take advantage of this. Tested-by: Philip Tricca <philip.b.tricca@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off--by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-10-05tpm: add ptr to the tpm_space struct to file_privTadeusz Struk4-25/+12
Add a ptr to struct tpm_space to the file_priv and consolidate of the write operations for the two interfaces. Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Tested-by: Philip Tricca <philip.b.tricca@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off--by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-10-05tpm: Make SECURITYFS a weak dependencyPeter Huewe1-1/+1
While having SECURITYFS enabled for the tpm subsystem is beneficial in most cases, it is not strictly necessary to have it enabled at all. Especially on platforms without any boot firmware integration of the TPM (e.g. raspberry pi) it does not add any value for the tpm subsystem, as there is no eventlog present. By turning it from 'select' to 'imply' it still gets selected per default, but enables users who want to save some kb of ram by turning SECURITYFS off. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-10-05tpm: suppress transmit cmd error logs when TPM 1.2 is disabled/deactivatedJavier Martinez Canillas1-1/+2
For TPM 1.2 chips the system setup utility allows to set the TPM device in one of the following states: * Active: Security chip is functional * Inactive: Security chip is visible, but is not functional * Disabled: Security chip is hidden and is not functional When choosing the "Inactive" state, the TPM 1.2 device is enumerated and registered, but sending TPM commands fail with either TPM_DEACTIVATED or TPM_DISABLED depending if the firmware deactivated or disabled the TPM. Since these TPM 1.2 error codes don't have special treatment, inactivating the TPM leads to a very noisy kernel log buffer that shows messages like the following: tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) tpm tpm0: A TPM error (6) occurred attempting to read a pcr value tpm tpm0: TPM is disabled/deactivated (0x6) tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting to read a pcr value ima: No TPM chip found, activating TPM-bypass! (rc=6) tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random Let's just suppress error log messages for the TPM_{DEACTIVATED,DISABLED} return codes, since this is expected when the TPM 1.2 is set to Inactive. In that case the kernel log is cleaner and less confusing for users, i.e: tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) tpm tpm0: TPM is disabled/deactivated (0x6) ima: No TPM chip found, activating TPM-bypass! (rc=6) Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-10-05tpm: fix response size validation in tpm_get_random()Jarkko Sakkinen2-2/+5
When checking whether the response is large enough to be able to contain the received random bytes in tpm_get_random() and tpm2_get_random(), they fail to take account the header size, which should be added to the minimum size. This commit fixes this issue. Cc: stable@vger.kernel.org Fixes: c659af78eb7b ("tpm: Check size of response before accessing data") Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-07-28tpm: replace TPM_TRANSMIT_RAW with TPM_TRANSMIT_NESTEDJarkko Sakkinen4-25/+20
As TPM_TRANSMIT_RAW always requires also not to take locks for obvious reasons (deadlock), this commit renames the flag as TPM_TRANSMIT_NESTED and prevents taking tpm_mutex when the flag is given to tpm_transmit(). Suggested-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-07-28tpm: Convert tpm_find_get_ops() to use tpm_default_chip()Stefan Berger1-19/+13
Convert tpm_find_get_ops() to use tpm_default_chip() in case no chip is passed in. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-07-28tpm: Implement tpm_default_chip() to find a TPM chipStefan Berger1-0/+27
Implement tpm_default_chip() to find the first TPM chip and return it to the caller while increasing the reference count on its device. This function can be used by other subsystems, such as IMA, to find the system's default TPM chip and use it for all subsequent TPM operations. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-07-28tpm: rename tpm_chip_find_get() to tpm_find_get_ops()Stefan Berger3-11/+14
Rename tpm_chip_find_get() to tpm_find_get_ops() to more closely match the tpm_put_ops() counter part. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-07-28tpm: Allow tpm_tis drivers to set hwrng quality.Louis Collard2-0/+3
Adds plumbing required for drivers based on tpm_tis to set hwrng quality. Signed-off-by: Louis Collard <louiscollard@chromium.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-07-28tpm: Return the actual size when receiving an unsupported commandRicardo Schwarzmeier1-1/+1
The userpace expects to read the number of bytes stated in the header. Returning the size of the buffer instead would be unexpected. Cc: stable@vger.kernel.org Fixes: 095531f891e6 ("tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented") Signed-off-by: Ricardo Schwarzmeier <Ricardo.Schwarzmeier@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-07-28tpm: separate cmd_ready/go_idle from runtime_pmTomas Winkler4-92/+88
Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-07-28tpm/tpm_i2c_infineon: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT)Peter Rosin1-4/+4
Locking the root adapter for __i2c_transfer will deadlock if the device sits behind a mux-locked I2C mux. Switch to the finer-grained i2c_lock_bus with the I2C_LOCK_SEGMENT flag. If the device does not sit behind a mux-locked mux, the two locking variants are equivalent. Signed-off-by: Peter Rosin <peda@axentia.se> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-07-28tpm_tis_spi: Pass the SPI IRQ down to the driverLinus Walleij1-1/+8
An SPI TPM device managed directly on an embedded board using the SPI bus and some GPIO or similar line as IRQ handler will pass the IRQn from the TPM device associated with the SPI device. This is already handled by the SPI core, so make sure to pass this down to the core as well. (The TPM core habit of using -1 to signal no IRQ is dubious (as IRQ 0 is NO_IRQ) but I do not want to mess with that semantic in this patch.) Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-07-28tpm: migrate tpm2_get_random() to use struct tpm_bufJarkko Sakkinen2-70/+51
In order to make struct tpm_buf the first class object for constructing TPM commands, migrate tpm2_get_random() to use it. In addition, removed remaining references to struct tpm2_cmd. All of them use it to acquire the length of the response, which can be achieved by using tpm_buf_length(). Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Nayna Jain<nayna@linux.vnet.ibm.com>
2018-07-28tpm: migrate tpm2_get_tpm_pt() to use struct tpm_bufJarkko Sakkinen1-42/+27
In order to make struct tpm_buf the first class object for constructing TPM commands, migrate tpm2_get_tpm_pt() to use it. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Nayna Jain <nayna@linux.vnet.ibm.com> Tested-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
2018-07-28tpm: migrate tpm2_probe() to use struct tpm_bufJarkko Sakkinen1-17/+23
In order to make struct tpm_buf the first class object for constructing TPM commands, migrate tpm2_probe() to use it. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Acked-by: Jay Freyensee <why2jjj.linux@gmail.com> Reviewed-by: Nayna Jain <nayna@linux.vnet.ibm.com> Tested-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
2018-07-28tpm: migrate tpm2_shutdown() to use struct tpm_bufJarkko Sakkinen1-32/+15
In order to make struct tpm_buf the first class object for constructing TPM commands, migrated tpm2_shutdown() to use it. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Nayna Jain <nayna@linux.vnet.ibm.com> Tested-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-1/+1
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-30tpm: fix race condition in tpm_common_write()Tadeusz Struk2-23/+19
There is a race condition in tpm_common_write function allowing two threads on the same /dev/tpm<N>, or two different applications on the same /dev/tpmrm<N> to overwrite each other commands/responses. Fixed this by taking the priv->buffer_mutex early in the function. Also converted the priv->data_pending from atomic to a regular size_t type. There is no need for it to be atomic since it is only touched under the protection of the priv->buffer_mutex. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-05-18tpm: reduce polling time to usecs for even finer granularityNayna Jain2-3/+6
The TPM burstcount and status commands are supposed to return very quickly [2][3]. This patch further reduces the TPM poll sleep time to usecs in get_burstcount() and wait_for_tpm_stat() by calling usleep_range() directly. After this change, performance on a system[1] with a TPM 1.2 with an 8 byte burstcount for 1000 extends improved from ~10.7 sec to ~7 sec. [1] All tests are performed on an x86 based, locked down, single purpose closed system. It has Infineon TPM 1.2 using LPC Bus. [2] From the TCG Specification "TCG PC Client Specific TPM Interface Specification (TIS), Family 1.2": "NOTE : It takes roughly 330 ns per byte transfer on LPC. 256 bytes would take 84 us, which is a long time to stall the CPU. Chipsets may not be designed to post this much data to LPC; therefore, the CPU itself is stalled for much of this time. Sending 1 kB would take 350 μs. Therefore, even if the TPM_STS_x.burstCount field is a high value, software SHOULD be interruptible during this period." [3] From the TCG Specification 2.0, "TCG PC Client Platform TPM Profile (PTP) Specification": "It takes roughly 330 ns per byte transfer on LPC. 256 bytes would take 84 us. Chipsets may not be designed to post this much data to LPC; therefore, the CPU itself is stalled for much of this time. Sending 1 kB would take 350 us. Therefore, even if the TPM_STS_x.burstCount field is a high value, software should be interruptible during this period. For SPI, assuming 20MHz clock and 64-byte transfers, it would take about 120 usec to move 256B of data. Sending 1kB would take about 500 usec. If the transactions are done using 4 bytes at a time, then it would take about 1 msec. to transfer 1kB of data." Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Acked-by: Jay Freyensee <why2jjj.linux@gmail.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-05-14tpm: replace kmalloc() + memcpy() with kmemdup()Ji-Hun Kim1-2/+1
Use kmemdup rather than duplicating its implementation. Signed-off-by: Ji-Hun Kim <ji_hun.kim@samsung.com> Reviewed-by: James Morris <james.morris@microsoft.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
2018-05-14tpm: replace kmalloc() + memcpy() with kmemdup()Ji-Hun Kim1-3/+1
Use kmemdup rather than duplicating its implementation. Signed-off-by: Ji-Hun Kim <ji_hun.kim@samsung.com> Reviewed-by: James Morris <james.morris@microsoft.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-05-14tpm: fix use after free in tpm2_load_context()Tadeusz Struk1-1/+2
If load context command returns with TPM2_RC_HANDLE or TPM2_RC_REFERENCE_H0 then we have use after free in line 114 and double free in 117. Fixes: 4d57856a21ed2 ("tpm2: add session handle context saving and restoring to the space code") Cc: stable@vger.kernel.org Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off--by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-05-14tpm: reduce poll sleep time in tpm_transmit()Nayna Jain3-10/+5
tpm_try_transmit currently checks TPM status every 5 msecs between send and recv. It does so in a loop for the maximum timeout as defined in the TPM Interface Specification. However, the TPM may return before 5 msecs. Thus the polling interval for each iteration can be reduced, which improves overall performance. This patch changes the polling sleep time from 5 msecs to 1 msec. Additionally, this patch renames TPM_POLL_SLEEP to TPM_TIMEOUT_POLL and moves it to tpm.h as an enum value. After this change, performance on a system[1] with a TPM 1.2 with an 8 byte burstcount for 1000 extends improved from ~14 sec to ~10.7 sec. [1] All tests are performed on an x86 based, locked down, single purpose closed system. It has Infineon TPM 1.2 using LPC Bus. Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Acked-by: Jay Freyensee <why2jjj.linux@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-05-14tpm_tis: verify locality released before returning from release_localityJerry Snitselaar1-1/+46
For certain tpm chips releasing locality can take long enough that a subsequent call to request_locality will see the locality as being active when the access register is read in check_locality. So check that the locality has been released before returning from release_locality. Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: Peter Huewe <peterhuewe@gmx.de> Cc: Jason Gunthorpe <jgg@ziepe.ca> Reported-by: Laurent Bigonville <bigon@debian.org> Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Tested-by: Laurent Bigonville <bigon@debian.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-05-10tpm: tpm_crb: relinquish locality on error path.Winkler, Tomas1-3/+7
In crb_map_io() function, __crb_request_locality() is called prior to crb_cmd_ready(), but if one of the consecutive function fails the flow bails out instead of trying to relinquish locality. This patch adds goto jump to __crb_relinquish_locality() on the error path. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-05-09tpm/st33zp24: Fix spelling mistake in macro ST33ZP24_TISREGISTER_UKNOWNColin Ian King1-2/+2
Fix spelling mistake, rename ST33ZP24_TISREGISTER_UKNOWN to ST33ZP24_TISREGISTER_UNKNOWN Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-05-09tpm: Move eventlog declarations to its own headerThiebaud Weksteen8-30/+41
Reduce the size of tpm.h by moving eventlog declarations to a separate header. Signed-off-by: Thiebaud Weksteen <tweek@google.com> Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-05-09tpm: Move shared eventlog functions to common.cThiebaud Weksteen4-184/+214
Functions and structures specific to TPM1 are renamed from tpm* to tpm1*. Signed-off-by: Thiebaud Weksteen <tweek@google.com> Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-05-09tpm: Move eventlog files to a subdirectoryThiebaud Weksteen6-9/+9
Signed-off-by: Thiebaud Weksteen <tweek@google.com> Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-05-09tpm: Add explicit endianness castThiebaud Weksteen1-2/+2
Signed-off-by: Thiebaud Weksteen <tweek@google.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-05-09tpm: st33zp24: remove redundant null check on chipColin Ian King1-2/+0
Currently chip is being dereferenced by the call to dev_get_drvdata before it is being null checked, however, chip can never be null, so this check is misleading and redundant. Remove it. Detected by CoverityScan, CID#1357806 ("Dereference before null check") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Jarkko Sakkinen <jarkkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkkko.sakkinen@linux.intel.com>
2018-05-09tpm: move the delay_msec increment after sleep in tpm_transmit()Nayna Jain1-1/+2
Commit e2fb992d82c6 ("tpm: add retry logic") introduced a new loop to handle the TPM2_RC_RETRY error. The loop retries the command after sleeping for the specified time, which is incremented exponentially in every iteration. Unfortunately, the loop doubles the time before sleeping, causing the initial sleep to be doubled. This patch fixes the initial sleep time. Fixes: commit e2fb992d82c6 ("tpm: add retry logic") Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-04-07Merge branch 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds5-120/+249
Pull TPM updates from James Morris: "This release contains only bug fixes. There are no new major features added" * 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: tpm: fix intermittent failure with self tests tpm: add retry logic tpm: self test failure should not cause suspend to fail tpm2: add longer timeouts for creation commands. tpm_crb: use __le64 annotated variable for response buffer address tpm: fix buffer type in tpm_transmit_cmd tpm: tpm-interface: fix tpm_transmit/_cmd kdoc tpm: cmd_ready command can be issued only after granting locality
2018-04-05kernel.h: Retain constant expression output for max()/min()Kees Cook1-4/+4
In the effort to remove all VLAs from the kernel[1], it is desirable to build with -Wvla. However, this warning is overly pessimistic, in that it is only happy with stack array sizes that are declared as constant expressions, and not constant values. One case of this is the evaluation of the max() macro which, due to its construction, ends up converting constant expression arguments into a constant value result. All attempts to rewrite this macro with __builtin_constant_p() failed with older compilers (e.g. gcc 4.4)[2]. However, Martin Uecker, constructed[3] a mind-shattering solution that works everywhere. Cthulhu fhtagn! This patch updates the min()/max() macros to evaluate to a constant expression when called on constant expression arguments. This removes several false-positive stack VLA warnings from an x86 allmodconfig build when -Wvla is added: $ diff -u before.txt after.txt | grep ^- -drivers/input/touchscreen/cyttsp4_core.c:871:2: warning: ISO C90 forbids variable length array ‘ids’ [-Wvla] -fs/btrfs/tree-checker.c:344:4: warning: ISO C90 forbids variable length array ‘namebuf’ [-Wvla] -lib/vsprintf.c:747:2: warning: ISO C90 forbids variable length array ‘sym’ [-Wvla] -net/ipv4/proc.c:403:2: warning: ISO C90 forbids variable length array ‘buff’ [-Wvla] -net/ipv6/proc.c:198:2: warning: ISO C90 forbids variable length array ‘buff’ [-Wvla] -net/ipv6/proc.c:218:2: warning: ISO C90 forbids variable length array ‘buff64’ [-Wvla] This also updates two cases where different enums were being compared and explicitly casts them to int (which matches the old side-effect of the single-evaluation code): one in tpm/tpm_tis_core.h, and one in drm/drm_color_mgmt.c. [1] https://lkml.org/lkml/2018/3/7/621 [2] https://lkml.org/lkml/2018/3/10/170 [3] https://lkml.org/lkml/2018/3/20/845 Co-Developed-by: Linus Torvalds <torvalds@linux-foundation.org> Co-Developed-by: Martin Uecker <Martin.Uecker@med.uni-goettingen.de> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-23tpm: fix intermittent failure with self testsJames Bottomley3-40/+31
My Nuvoton 6xx in a Dell XPS-13 has been intermittently failing to work (necessitating a reboot). The problem seems to be that the TPM gets into a state where the partial self-test doesn't return TPM_RC_SUCCESS (meaning all tests have run to completion), but instead returns TPM_RC_TESTING (meaning some tests are still running in the background). There are various theories that resending the self-test command actually causes the tests to restart and thus triggers more TPM_RC_TESTING returns until the timeout is exceeded. There are several issues here: firstly being we shouldn't slow down the boot sequence waiting for the self test to complete once the TPM backgrounds them. It will actually make available all functions that have passed and if it gets a failure return TPM_RC_FAILURE to every subsequent command. So the fix is to kick off self tests once and if they return TPM_RC_TESTING log that as a backgrounded self test and continue on. In order to prevent other tpm users from seeing any TPM_RC_TESTING returns (which it might if they send a command that needs a TPM subsystem which is still under test), we loop in tpm_transmit_cmd until either a timeout or we don't get a TPM_RC_TESTING return. Finally, there have been observations of strange returns from a partial test. One Nuvoton is occasionally returning TPM_RC_COMMAND_CODE, so treat any unexpected return from a partial self test as an indication we need to run a full self test. [jarkko.sakkinen@linux.intel.com: cleaned up some klog messages and dropped tpm_transmit_check() helper function from James' original commit.] Fixes: 2482b1bba5122 ("tpm: Trigger only missing TPM 2.0 self tests") Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
2018-03-23tpm: add retry logicJames Bottomley2-15/+61
TPM2 can return TPM2_RC_RETRY to any command and when it does we get unexpected failures inside the kernel that surprise users (this is mostly observed in the trusted key handling code). The UEFI 2.6 spec has advice on how to handle this: The firmware SHALL not return TPM2_RC_RETRY prior to the completion of the call to ExitBootServices(). Implementer’s Note: the implementation of this function should check the return value in the TPM response and, if it is TPM2_RC_RETRY, resend the command. The implementation may abort if a sufficient number of retries has been done. So we follow that advice in our tpm_transmit() code using TPM2_DURATION_SHORT as the initial wait duration and TPM2_DURATION_LONG as the maximum wait time. This should fix all the in-kernel use cases and also means that user space TSS implementations don't have to have their own retry handling. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: stable@vger.kernel.org Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-03-23tpm: self test failure should not cause suspend to failChris Chiu1-0/+4
The Acer Acer Veriton X4110G has a TPM device detected as: tpm_tis 00:0b: 1.2 TPM (device-id 0xFE, rev-id 71) After the first S3 suspend, the following error appears during resume: tpm tpm0: A TPM error(38) occurred continue selftest Any following S3 suspend attempts will now fail with this error: tpm tpm0: Error (38) sending savestate before suspend PM: Device 00:0b failed to suspend: error 38 Error 38 is TPM_ERR_INVALID_POSTINIT which means the TPM is not in the correct state. This indicates that the platform BIOS is not sending the usual TPM_Startup command during S3 resume. >From this point onwards, all TPM commands will fail. The same issue was previously reported on Foxconn 6150BK8MC and Sony Vaio TX3. The platform behaviour seems broken here, but we should not break suspend/resume because of this. When the unexpected TPM state is encountered, set a flag to skip the affected TPM_SaveState command on later suspends. Cc: stable@vger.kernel.org Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Daniel Drake <drake@endlessm.com> Link: http://lkml.kernel.org/r/CAB4CAwfSCvj1cudi+MWaB5g2Z67d9DwY1o475YOZD64ma23UiQ@mail.gmail.com Link: https://lkml.org/lkml/2011/3/28/192 Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=591031 Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-03-23tpm2: add longer timeouts for creation commands.Tomas Winkler3-13/+26
TPM2_CC_Create(0x153) and TPM2_CC_CreatePrimary (0x131) involve generation of crypto keys which can be a computationally intensive task. The timeout is set to 3min. Rather than increasing default timeout a new constant is added, to not stall for too long on regular commands failures. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-03-23tpm_crb: use __le64 annotated variable for response buffer addressTomas Winkler1-2/+3
use __le64 annotated variable for response buffer address as this is read in little endian format form the register. This suppresses sparse warning drivers/char/tpm/tpm_crb.c:558:18: warning: cast to restricted __le64 Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-03-23tpm: fix buffer type in tpm_transmit_cmdWinkler, Tomas2-5/+5
1. The buffer cannot be const as it is used both for send and receive. 2. Drop useless casting to u8 *, as this is already a type of 'buf' parameter, it has just masked the 'const' issue. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-03-23tpm: tpm-interface: fix tpm_transmit/_cmd kdocWinkler, Tomas1-2/+4
Fix tmp_ -> tpm_ typo and add reference to 'space' parameter in kdoc for tpm_transmit and tpm_transmit_cmd functions. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-03-23tpm: cmd_ready command can be issued only after granting localityTomas Winkler3-47/+119
The correct sequence is to first request locality and only after that perform cmd_ready handshake, otherwise the hardware will drop the subsequent message as from the device point of view the cmd_ready handshake wasn't performed. Symmetrically locality has to be relinquished only after going idle handshake has completed, this requires that go_idle has to poll for the completion and as well locality relinquish has to poll for completion so it is not overridden in back to back commands flow. Two wrapper functions are added (request_locality relinquish_locality) to simplify the error handling. The issue is only visible on devices that support multiple localities. Fixes: 877c57d0d0ca ("tpm_crb: request and relinquish locality 0") Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
2018-02-26tpm: fix potential buffer overruns caused by bit glitches on the busJeremy Boone2-0/+8
Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. If a bit does flip it could cause an overrun if it's in one of the size parameters, so sanity check that we're not overrunning the provided buffer when doing a memcpy(). Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2018-02-26tpm: st33zp24: fix potential buffer overruns caused by bit glitches on the busJeremy Boone1-2/+2
Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2018-02-26tpm_i2c_infineon: fix potential buffer overruns caused by bit glitches on the busJeremy Boone1-2/+3
Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2018-02-26tpm_i2c_nuvoton: fix potential buffer overruns caused by bit glitches on the busJeremy Boone1-2/+6
Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2018-02-26tpm_tis: fix potential buffer overruns caused by bit glitches on the busJeremy Boone1-2/+3
Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.