aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/clk/clk-qoriq.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-07-21clk: Convert to using %pOF instead of full_nameRob Herring1-4/+3
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "Emilio López" <emilio@elopez.com.ar> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: linux-omap@vger.kernel.org Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: James Liao <jamesjj.liao@mediatek.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-07-21clk: qoriq: add pll clock to clock lookup tableYuantian Tang1-0/+7
Register each PLL and its division clocks to clock lookup table to facilitate the clock look up for clock consumer. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-07-21clk: qoriq: add clock configuration for ls1088a socYuantian Tang1-0/+12
Clock on ls1088a chip takes primary clocking input from the external SYSCLK signal. The SYSCLK input (frequency) is multiplied using multiple phase locked loops (PLL) to create a variety of frequencies which can then be passed to a variety of internal logic, including cores and peripheral IP modules. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-01clk: qoriq: Separate root input clock for core PLLs on ls1012aScott Wood1-14/+77
ls1012a has separate input root clocks for core PLLs versus the platform PLL, with the latter described as sysclk in the hw docs. If a second input clock, named "coreclk", is present, this clock will be used for the core PLLs. Signed-off-by: Scott Wood <oss@buserror.net> Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-08clk: qoriq: added ls1012a clock configurationTang Yuantian1-0/+19
Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> [sboyd@codeaurora.org: Sorted list] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01Merge branch 'clk-fixes' into clk-nextStephen Boyd1-5/+8
* clk-fixes: clk: mmp: pxa910: fix return value check in pxa910_clk_init() clk: mmp: pxa168: fix return value check in pxa168_clk_init() clk: mmp: mmp2: fix return value check in mmp2_clk_init() clk: qoriq: Don't allow CPU clocks higher than starting value
2016-11-01clk: qoriq: add ls1046a supportMingkai Hu1-0/+41
Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: qoriq: Don't allow CPU clocks higher than starting valueScott Wood1-5/+8
The boot-time frequency of a CPU is considered its rated maximum, as we have no other source of such information. However, this was previously only used for chips with 80% restrictions on secondary PLLs. This usually wasn't a problem because most chips/configs boot with a divider of /1, with other dividers being used only for dynamic frequency reduction. However, at least one config (LS1021A at less than 1 GHz) uses a different divider for top speed. This was causing cpufreq to set a frequency beyond the chip's rated speed. This is fixed by applying a 100%-of-initial-speed limit to all CPU PLLs, similar to the existing 80% limit that only applied to some. Signed-off-by: Scott Wood <oss@buserror.net> Cc: stable@vger.kernel.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-18clk: qoriq: fix a register offset errorTang Yuantian1-1/+5
The offset of Core Cluster clock control/status register on cluster group V3 version is different from others, and should be plus 0x70000. Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Reviewed-by: Scott Wood <oss@buserror.net> Fixes: 9e19ca2f627e ("clk: qoriq: Add ls2080a support.") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-04-19clk: qoriq: add __init attributeJulia Lawall1-1/+2
Add __init attribute on a function that is only called from other __init functions and that is not inlined, at least with gcc version 4.8.4 on an x86 machine with allyesconfig. Currently, the function is put in the .text.unlikely segment. Declaring it as __init will cause it to be put in the .init.text and to disappear after initialization. The result of objdump -x on the function before the change is as follows: 0000000000000000 l F .text.unlikely 0000000000000071 sysclk_from_fixed.constprop.5 And after the change it is as follows: 0000000000000480 l F .init.text 000000000000006c sysclk_from_fixed.constprop.5 Done with the help of Coccinelle. The semantic patch checks for local static non-init functions that are called from an __init function and are not called from any other function. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-04-15clk: qoriq: Remove CLK_IS_ROOTStephen Boyd1-1/+1
This flag is a no-op now. Remove usage of the flag. Cc: Hou Zhiqiang <B48286@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-11-30clk: qoriq: fix memory leakSudip Mukherjee1-1/+3
If get_pll_div() fails we exited by returning NULL but we missed releasing hwc. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Fixes: 0dfc86b3173f ("clk: qoriq: Move chip-specific knowledge into driver") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-27clk: qoriq: Add ls1043a support.Hou Zhiqiang1-0/+38
Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-22clk: qoriq: Fix wrong data in p2041_cmux_grp2Scott Wood1-2/+2
Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-21clk: qoriq: Add ls2080a support.Scott Wood1-9/+68
LS2080A is the first implementation of the chassis 3 clockgen, which has a different register layout than previous chips. It is also little endian, unlike previous chips. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-21clk: qoriq: Move chip-specific knowledge into driverScott Wood1-221/+1040
The device tree should describe the chips (or chip-like subblocks) in the system, but it generally does not describe individual registers -- it should identify, rather than describe, a programming interface. This has not been the case with the QorIQ clockgen nodes. The knowledge of what each bit setting of CLKCnCSR means is encoded in three places (binding, pll node, and mux node), and the last also needs to know which options are valid on a particular chip. All three of these locations are considered stable ABI, making it difficult to fix mistakes (of which I have found several), much less refactor the abstraction to be able to address problems, limitations, or new chips. Under the current binding, a pll clock specifier of 2 means that the PLL is divided by 4 -- and the driver implements this, unless there happen to be four clock-output-names rather than 3, in which case it interprets it as PLL divided by 3. This does not appear in the binding documentation at all. That hack is now considered stable ABI. The current device tree nodes contain errors, such as saying that T1040 can set a core clock to PLL/4 when only PLL and PLL/2 are options. The current binding also ignores some restrictions on clock selection, such as p5020's requirement that if a core uses the "wrong" PLL, that PLL must be clocked lower than the "correct" PLL and be at most 80% of the rated CPU frequency. Possibly because of the lack of the ability to express such nuance in the binding, some valid options are omitted from the device trees, such as the ability on p4080 to run cores 0-3 from PLL3 and cores 4-7 from PLL1 (again, only if they are at most 80% of rated CPU frequency). This omission, combined with excessive caution in the cpufreq driver (addressed in a subsequent patch), means that currently on a 1500 MHz p4080 with typical PLL configuration, cpufreq can lower the frequency to 1200 MHz on half the CPUs and do nothing on the others. With this patchset, all CPUs can be lowered to 1200 MHz on a rev2 p4080, and on a rev3 p4080 half can be lowered to 750 MHz and the other half to 600 MHz. The current binding only deals with CPU clocks. To describe FMan in the device tree, we need to describe its clock. Some chips have additional muxes that work like the CPU muxes, but are not described in the device tree. Others require inspecting the Reset Control Word to determine which PLL is used. Rather than continue to extend this mess, replace it. Have the driver bind to the chip-specific clockgen compatible, and keep the detailed description of quirky chip variations in the driver, where it can be easily fixed, refactored, and extended. Older device trees will continue to work (including a workaround for old ls1021a device trees that are missing compatible and reg in the clockgen node, which even the old binding required). The pll/mux details in old device trees will be ignored, but "clocks" properties pointing at the old nodes will still work, and be directed at the corresponding new clock. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2015-02-18clk: qoriq: Add support for the platform PLLEmil Medve1-0/+83
Change-Id: Iac11ed95f274485a86d2c11f32a3dc502bcd020f Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Acked-by: Tang Yuantian <Yuantian.Tang@freescale.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-28clk: qoriq: Use pr_fmt()Emil Medve1-2/+5
Currently a mix of clk-qoriq/qoriq-clk and no prefix is used Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-28clk: qoriq: Replace kzalloc() with kmalloc()Emil Medve1-1/+1
Where the memset() is not necessary Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-28clk: qoriq: Make local symbol 'static'Emil Medve1-1/+1
drivers/clk/clk-qoriq.c:59:22: warning: symbol 'cmux_ops' was not declared. Should it be static? Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-28clk: qoriq: Fix checkpatch type OOM_MESSAGEEmil Medve1-12/+5
WARNING:OOM_MESSAGE: Possible unnecessary 'out of memory' message + if (!parent_names) { + pr_err("%s: could not allocate parent_names\n", __func__); WARNING:OOM_MESSAGE: Possible unnecessary 'out of memory' message + if (!cmux_clk) { + pr_err("%s: could not allocate cmux_clk\n", __func__); WARNING:OOM_MESSAGE: Possible unnecessary 'out of memory' message + if (!subclks) { + pr_err("%s: could not allocate subclks\n", __func__); WARNING:OOM_MESSAGE: Possible unnecessary 'out of memory' message + if (!onecell_data) { + pr_err("%s: could not allocate onecell_data\n", __func__); Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-28clk: qoriq: Fix checkpatch type ALLOC_SIZEOF_STRUCTEmil Medve1-2/+2
CHECK:ALLOC_SIZEOF_STRUCT: Prefer kzalloc(sizeof(*cmux_clk)...) over kzalloc(sizeof(struct cmux_clk)...) + cmux_clk = kzalloc(sizeof(struct cmux_clk), GFP_KERNEL); CHECK:ALLOC_SIZEOF_STRUCT: Prefer kzalloc(sizeof(*onecell_data)...) over kzalloc(sizeof(struct clk_onecell_data)...) + onecell_data = kzalloc(sizeof(struct clk_onecell_data), GFP_KERNEL); Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-28clk: qoriq: Fix checkpatch type ALLOC_WITH_MULTIPLYEmil Medve1-2/+2
WARNING:ALLOC_WITH_MULTIPLY: Prefer kcalloc over kzalloc with multiply + subclks = kzalloc(sizeof(struct clk *) * count, GFP_KERNEL); Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-28clk: qoriq: Fix checkpatch type PARENTHESIS_ALIGNMENTEmil Medve1-4/+4
CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis + rc = of_property_read_string_index(np, "clock-output-names", + 0, &clk_name); CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis + pr_err("Could not register clock provider for node:%s\n", + np->name); CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis + rc = of_property_read_string_index(np, "clock-output-names", + i, &clk_name); CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis + pr_err("Could not register clk provider for node:%s\n", + np->name); Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-20clk: ppc-corenet: rename driver to clk-qoriqTang Yuantian1-0/+283
Freescale introduced new ARM-based socs which using the compatible clock IP block with PowerPC-based socs'. So this driver can be used on both platforms. Updated relevant descriptions and renamed this driver to better represent its meaning and keep the function of driver untouched. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.