aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/clk
AgeCommit message (Collapse)AuthorFilesLines
2021-06-27clk: stm32mp1: convert to module driverGabriel Fernandez1-43/+78
Adds support for probe deferral in way to prepare integration of the security in RCC clock and reset drivers. Some kernel clocks will be provided by the SCMI drivers. Since RCC clock driver create clocks which parents are SCMI clocks, RCC clock driver probe can be deferred. Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20210617051814.12018-5-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27clk: stm32mp1: remove intermediate pll clocksGabriel Fernandez1-23/+42
This patch is to prepare STM32MP1 clocks in trusted mode. Integrate the mux clock into pll clock will facilitate to have a more coherent clock tree in no trusted / trusted mode. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20210617051814.12018-4-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27clk: stm32mp1: merge 'ck_hse_rtc' and 'ck_rtc' into one clockGabriel Fernandez1-6/+48
'ck_rtc' has multiple clocks as input (ck_hsi, ck_lsi, and ck_hse). A divider is available only on the specific rtc input for ck_hse. This Merge will facilitate to have a more coherent clock tree in no trusted / trusted world. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20210617051814.12018-3-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27clk: stm32mp1: merge 'clk-hsi-div' and 'ck_hsi' into one clockGabriel Fernandez1-5/+5
This patch is to prepare STM32MP1 clocks in trusted mode. This Merge will facilitate to have a more coherent clock tree in no trusted / trusted world. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20210617051814.12018-2-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27clk: lmk04832: add support for digital delayLiam Beguin1-6/+315
The digital delay allows outputs to be delayed from 8 to 1023 VCO cycles. The delay step can be as small as half the period of the clock distribution path. For example, a 3.2-GHz VCO frequency results in 156.25-ps steps. The digital delay value takes effect on the clock output phase after a SYNC event. This is required to support JESD204B subclass 1. Signed-off-by: Liam Beguin <lvb@xiphos.com> Link: https://lore.kernel.org/r/20210423004057.283926-3-liambeguin@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27clk: add support for the lmk04832Liam Beguin3-0/+1296
The LMK04832 is an ultra-high performance clock conditioner with JEDEC JESD204B support and is also pin compatible with the LMK0482x family of devices. Signed-off-by: Liam Beguin <lvb@xiphos.com> Link: https://lore.kernel.org/r/20210423004057.283926-2-liambeguin@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27clk: socfpga: clk-pll: Remove unused variable 'rc'Jian Xin1-2/+1
Fix the following build warning: drivers/clk/socfpga/clk-pll.c: In function ‘__socfpga_pll_init’: drivers/clk/socfpga/clk-pll.c:83:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] Signed-off-by: Jian Xin <xinjian@yulong.com> Link: https://lore.kernel.org/r/20210609073742.722911-1-xinjian34324@163.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27clk: qcom: Add camera clock controller driver for SM8250Jonathan Marek3-0/+2464
Add support for the camera clock controller found on SM8250. Based on the downstream driver. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://lore.kernel.org/r/20210609022051.2171-4-jonathan@marek.ca [sboyd@kernel.org: Add UL to avoid decimal problems] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27clk: qcom: clk-alpha-pll: add support for zonda pllJonathan Marek2-0/+180
Ported over from the downstream driver. Will be used by SM8250 CAMCC. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20210609022051.2171-2-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27clk/qcom: Remove unused variablesPu Lehui1-23/+0
Fix gcc '-Wunused-const-variable' warnings: drivers/clk/qcom/gcc-mdm9607.c:122:37: warning: 'gcc_xo_gpll0_gpll1' defined but not used [-Wunused-const-variable=] drivers/clk/qcom/gcc-mdm9607.c:116:32: warning: 'gcc_xo_gpll0_gpll1_map' defined but not used [-Wunused-const-variable=] drivers/clk/qcom/gcc-mdm9607.c:42:37: warning: 'gcc_xo_sleep' defined but not used [-Wunused-const-variable=] drivers/clk/qcom/gcc-mdm9607.c:37:32: warning: 'gcc_xo_sleep_map' defined but not used [-Wunused-const-variable=] Let's remove them. Signed-off-by: Pu Lehui <pulehui@huawei.com> Link: https://lore.kernel.org/r/20210609061848.87415-1-pulehui@huawei.com Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27clk: qcom: smd-rpmcc: Add support for MSM8226 rpm clocksBartosz Dudziak1-0/+1
Add compatible for rpm smd clocks, PMIC and bus clocks which are required on MSM8226 for clients to vote on. Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl> Link: https://lore.kernel.org/r/20210605104040.12960-1-bartosz.dudziak@snejp.pl Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27clk: qcom: gcc: Add support for Global Clock controller found on MSM8226Bartosz Dudziak1-7/+162
Modify existing MSM8974 driver to support MSM8226 SoC. Override frequencies which are different in this older chip. Register all the clocks to the framework for the clients to be able to request for them. Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl> Link: https://lore.kernel.org/r/20210418122909.71434-3-bartosz.dudziak@snejp.pl Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27clk: qcom: Add SM6125 (TRINKET) GCC driverKonrad Dybcio3-0/+4198
Add the clocks supported in global clock controller, which clock the peripherals like BLSPs, SDCC, USB, MDSS etc. Register all the clocks to the clock framework for the clients to be able to request for them. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Martin Botka <martin.botka@somainline.org> Link: https://lore.kernel.org/r/20210605121040.282053-2-martin.botka@somainline.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> [sboyd@kernel.org: Mark gcc_sm6125_hws array static] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27clk: qcom: gcc: Add support for a new frequency for SC7280Taniya Das1-0/+1
There is a requirement to support 52MHz for qup clocks for bluetooth usecase, thus update the frequency table to support the frequency. Fixes: a3cc092196ef ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280") Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1624449471-9984-1-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27clk: agilex/stratix10/n5x: fix how the bypass_reg is handledDinh Nguyen1-3/+8
If the bypass_reg is set, then we can return the bypass parent, however, if there is not a bypass_reg, we need to figure what the correct parent mux is. The previous code never handled the parent mux if there was a bypass_reg. Fixes: 80c6b7a0894f ("clk: socfpga: agilex: add clock driver for the Agilex platform") Cc: stable@vger.kernel.org Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20210611025201.118799-4-dinguyen@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27clk: agilex/stratix10: add support for the 2nd bypassDinh Nguyen3-2/+123
The EMAC clocks on Stratix10/Agilex/N5X have an additional bypass that was not being accounted for. The bypass selects between emaca_clk/emacb_clk and boot_clk. Because the bypass register offset is different between Stratix10 and Agilex/N5X, it's best to create a new function to calculate the bypass. Fixes: 80c6b7a0894f ("clk: socfpga: agilex: add clock driver for the Agilex platform") Cc: stable@vger.kernel.org Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20210611025201.118799-3-dinguyen@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27clk: agilex/stratix10: fix bypass representationDinh Nguyen2-21/+91
Each of these clocks(s2f_usr0/1, sdmmc_clk, gpio_db, emac_ptp, emac0/1/2) have a bypass setting that can use the boot_clk. The previous representation was not correct. Fix the representation. Fixes: 80c6b7a0894f ("clk: socfpga: agilex: add clock driver for the Agilex platform") Cc: stable@vger.kernel.org Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20210611025201.118799-2-dinguyen@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27clk: agilex/stratix10: remove noc_clkDinh Nguyen2-34/+30
Early documentation had a noc_clk, but in reality, it's just the noc_free_clk. Remove the noc_clk clock and just use the noc_free_clk. Fixes: 80c6b7a0894f ("clk: socfpga: agilex: add clock driver for the Agilex platform") Cc: stable@vger.kernel.org Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20210611025201.118799-1-dinguyen@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-25clk: tegra: clk-tegra124-dfll-fcpu: don't use devm functions for regulatorAlexandru Ardelean1-2/+2
The purpose of the device-managed functions is to bind the life-time of an object to that of a parent device object. This is not the case for the 'vdd-cpu' regulator in this driver. A reference is obtained via devm_regulator_get() and immediately released with devm_regulator_put(). In this case, the usage of devm_ functions is slightly excessive, as the un-managed versions of these functions is a little cleaner (and slightly more economical in terms of allocation). This change converts the devm_regulator_{get,put}() to regulator_{get,put}() in the get_alignment_from_regulator() function of this driver. Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Link: https://lore.kernel.org/r/20210624084737.42336-1-aardelean@deviqon.com Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-25clk: zynqmp: pll: Remove some dead codeChristophe JAILLET1-2/+0
'clk_hw_set_rate_range()' does not return any error code and 'ret' is known to be 0 at this point, so this message can never be displayed. Remove it. Fixes: 3fde0e16d016 ("drivers: clk: Add ZynqMP clock driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/71a9fed5f762a71248b8ac73c0a15af82f3ce1e2.1619867987.git.christophe.jaillet@wanadoo.fr Reviewed-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-25clk: zynqmp: fix compile testing without ZYNQMP_FIRMWAREMichal Simek2-8/+24
When the firmware code is disabled, the incomplete error handling in the clk driver causes compile-time warnings: drivers/clk/zynqmp/pll.c: In function 'zynqmp_pll_recalc_rate': drivers/clk/zynqmp/pll.c:147:29: error: 'fbdiv' is used uninitialized [-Werror=uninitialized] 147 | rate = parent_rate * fbdiv; | ~~~~~~~~~~~~^~~~~~~ In function 'zynqmp_pll_get_mode', inlined from 'zynqmp_pll_recalc_rate' at drivers/clk/zynqmp/pll.c:148:6: drivers/clk/zynqmp/pll.c:61:27: error: 'ret_payload' is used uninitialized [-Werror=uninitialized] 61 | return ret_payload[1]; | ~~~~~~~~~~~^~~ drivers/clk/zynqmp/pll.c: In function 'zynqmp_pll_recalc_rate': drivers/clk/zynqmp/pll.c:53:13: note: 'ret_payload' declared here 53 | u32 ret_payload[PAYLOAD_ARG_CNT]; | ^~~~~~~~~~~ drivers/clk/zynqmp/clk-mux-zynqmp.c: In function 'zynqmp_clk_mux_get_parent': drivers/clk/zynqmp/clk-mux-zynqmp.c:57:16: error: 'val' is used uninitialized [-Werror=uninitialized] 57 | return val; | ^~~ As it was apparently intentional to support this for compile testing purposes, change the code to have just enough error handling for the compiler to not notice the remaining bugs. Fixes: 21f237534661 ("clk: zynqmp: Drop dependency on ARCH_ZYNQMP") Co-developed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/f1c4e8c903fe2d5df5413421920a56890a46387a.1624356908.git.michal.simek@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-22clk: keystone: syscon-clk: Add support for AM64 specific epwm-tbclkLokesh Vutla1-0/+17
AM64 has 9 instances of EPWM modules. And each instance has a clk to Timer-Base sub-module that can be controlled by Control module. Update the driver with all the 9 instance of clocks associated to ti,am64-epwm-tbclk. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210528045743.16537-3-lokeshvutla@ti.com Reviewed-by: Tero Kristo <kristo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-14clk: imx8mq: remove SYS PLL 1/2 clock gatesLucas Stach1-38/+18
Remove the PLL clock gates as the allowing to gate the sys1_pll_266m breaks the uSDHC module which is sporadically unable to enumerate devices after this change. Also it makes AMP clock management harder with no obvious benefit to Linux, so just revert the change. Link: https://lore.kernel.org/r/20210528180135.1640876-1-l.stach@pengutronix.de Fixes: b04383b6a558 ("clk: imx8mq: Define gates for pll1/2 fixed dividers") Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-06-14clk: imx: scu: Do not enable runtime PM for CPU clksNitin Garg1-11/+17
Since CPU clocks are managed by CPUFREQ and ATF, do not enable runtime PM otherwise rpm gets out of status as cpufreq also manages clock states. Signed-off-by: Nitin Garg <nitin.garg@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-06-14clk: imx: scu: add parent save and restoreDong Aisheng1-1/+28
Add clock parent save and restore. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-06-14clk: imx: scu: Only save DC SS clock using non-cached clock rateAnson Huang1-1/+8
Display sub-system has special clock settings in SCFW, the bypassed clock is used instead of PLL in Linux kernel clock tree, so when saving clock rate, need to save non-cached clock rate for Display sub-system's bypass clocks, and other clocks still use the cached clock rate which is with runtime PM ON. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-06-14clk: imx: scu: Add A72 frequency scaling supportAnson Huang1-1/+3
Add A72 clock to support cpufreq on A72 cluster. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-06-14clk: imx: scu: Add A53 frequency scaling supportAnson Huang1-2/+2
Add i.MX8QM cpufreq support for A53 cluster. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-06-14clk: imx: scu: bypass pi_pll enable status restoreDong Aisheng1-1/+1
PI PLL does not support enable/disable. So bypass it's enable status restore. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-06-14clk: imx: scu: detach pd if can't power upDong Aisheng1-0/+1
detach pd if can't power up as it may be allocated to a differet partition. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-06-14clk: imx: scu: bypass cpu clock save and restoreDong Aisheng1-0/+10
CPU clock is managed by ATF. No need save and restore. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-06-14clk: imx: scu: add parallel port clock opsGuoniu.zhou1-0/+8
Because digital pll for parallel interface is on by default, and not provide enable/disable function by scu, so add the related ops for this kind of clocks. Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-06-14clk: imx: scu: add more scu clocksDong Aisheng1-2/+150
Add more scu clocks used by i.MX8 platforms. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-06-14clk: imx: scu: add enet rgmii gpr clocksDong Aisheng1-4/+18
enet tx clk actually is sourced from a gpr divider, not default enet clk. Add enet grp clocks for user to use correctly. Cc: Abel Vesa <abel.vesa@nxp.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-06-14clk: imx8qm: add clock valid resource checkingDong Aisheng4-1/+119
Add imx8qm clock valid resource checking mechanism Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-06-14clk: imx8qxp: add clock valid checking mechnismDong Aisheng5-8/+137
clk-imx8qxp is a common SCU clock driver used by both QM and QXP platforms. The clock numbers vary a bit between those two platforms. This patch introduces a mechanism to only register the valid clocks for one platform by checking the clk resource id table. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-06-14clk: imx: scu: add gpr clocks supportDong Aisheng2-0/+215
SCU clock protocol supports a few clocks based on GPR controller registers including mux/divider/gate. Add a generic clock register API to support them all. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-06-14clk: imx: scu: remove legacy scu clock binding supportDong Aisheng2-134/+80
Legacy scu clock binding are not maintained anymore, it has a very limited clocks supported during initial upstreaming and obviously unusable by products. So it's meaningless to keep it in kernel which worse the code readability. Remove it to keep code much cleaner. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-06-14clk: imx: Remove the audio ipg clock from imx8mpJacky Bai1-1/+0
There is no audio ipg clock on i.MX8MP, so remove this from the clock driver. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-06-10clk: renesas: Add support for R9A07G044 SoCLad Prabhakar5-0/+141
Define the clock outputs supported by RZ/G2L (R9A07G044) SoC and bind it with RZ/G2L CPG core. Based on a patch in the BSP by Binh Nguyen <binh.nguyen.jz@renesas.com>. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20210609153230.6967-10-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-06-10clk: renesas: Add CPG core wrapper for RZ/G2L SoCLad Prabhakar4-0/+883
Add CPG core wrapper for RZ/G2L family. Based on a patch in the BSP by Binh Nguyen <binh.nguyen.jz@renesas.com>. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20210609153230.6967-9-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-06-09clk: meson: g12a: Add missing NNA source clocks for g12bNick Xie1-0/+6
This adds the Neural Network Accelerator source clocks for g12b. Initial support for sm1 already exist in commit 2f1efa5340ef ("clk: meson: g12a: Add support for NNA CLK source clocks") The sm1 and g12b share the same NNA source clocks. This patch add missing NNA clocks for A311D (g12b). Signed-off-by: Nick Xie <nick@khadas.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210604032957.224496-1-xieqinick@gmail.com
2021-06-08clk: vc5: fix output disabling when enabling a FODLuca Ceresoli1-3/+24
On 5P49V6965, when an output is enabled we enable the corresponding FOD. When this happens for the first time, and specifically when writing register VC5_OUT_DIV_CONTROL in vc5_clk_out_prepare(), all other outputs are stopped for a short time and then restarted. According to Renesas support this is intended: "The reason for that is VC6E has synced up all output function". This behaviour can be disabled at least on VersaClock 6E devices, of which only the 5P49V6965 is currently implemented by this driver. This requires writing bit 7 (bypass_sync{1..4}) in register 0x20..0x50. Those registers are named "Unused Factory Reserved Register", and the bits are documented as "Skip VDDO<N> verification", which does not clearly explain the relation to FOD sync. However according to Renesas support as well as my testing setting this bit does prevent disabling of all clock outputs when enabling a FOD. See "VersaClock ® 6E Family Register Descriptions and Programming Guide" (August 30, 2018), Table 116 "Power Up VDD check", page 58: https://www.renesas.com/us/en/document/mau/versaclock-6e-family-register-descriptions-and-programming-guide Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20210527211647.1520720-1-luca@lucaceresoli.net Fixes: 2bda748e6ad8 ("clk: vc5: Add support for IDT VersaClock 5P49V6965") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-08clk: ti: add am33xx/am43xx spread spectrum clock supportDario Binacchi2-0/+124
The patch enables spread spectrum clocking (SSC) for MPU and LCD PLLs. As reported by the TI spruh73x/spruhl7x RM, SSC is only supported for the DISP/LCD and MPU PLLs on am33xx/am43xx. SSC is not supported for DDR, PER, and CORE PLLs. Calculating the required values and setting the registers accordingly was taken from the set_mpu_spreadspectrum routine contained in the arch/arm/mach-omap2/am33xx/clock_am33xx.c file of the u-boot project. In locked condition, DPLL output clock = CLKINP *[M/N]. In case of SSC enabled, the reference manual explains that there is a restriction of range of M values. Since the omap2_dpll_round_rate routine attempts to select the minimum possible N, the value of M obtained is not guaranteed to be within the range required. With the new "ti,min-div" parameter it is possible to increase N and consequently M to satisfy the constraint imposed by SSC. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Tero Kristo <kristo@kernel.org> Link: https://lore.kernel.org/r/20210606202253.31649-6-dariobin@libero.it Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-08clk: ti: fix typo in routine descriptionDario Binacchi1-1/+1
Replace _omap3_noncore_dpll_program with omap3_noncore_dpll_program. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20210606202253.31649-2-dariobin@libero.it Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-08clk: qcom: smd-rpm: Fix wrongly assigned RPM_SMD_PNOC_CLKKonrad Dybcio1-1/+1
During my big cleanup I managed to assign an AO clock to its non-AO binding. Fix this. Reported-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210606192657.51037-1-konrad.dybcio@somainline.org Fixes: a0384ecfe2aa ("clk: qcom: smd-rpm: De-duplicate identical entries") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-08clkdev: remove unused clkdev_alloc() interfacesArnd Bergmann1-28/+0
The last user of clkdev_alloc() and clkdev_hw_alloc() was removed last year, so everything now calls clkdev_create() and clkdev_hw_create() instead. Removing the unused functions lets the compiler optimize the remaining ones slightly better. Fixes: e5006671acc7 ("clk: versatile: Drop the legacy IM-PD1 clock code") Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-06-08clkdev: remove CONFIG_CLKDEV_LOOKUPArnd Bergmann2-7/+2
This option is now synonymous with CONFIG_HAVE_CLK, so use the latter globally. Any out-of-tree platform ports that still use a private clk_get()/clk_put() implementation should move to CONFIG_COMMON_CLK. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-06-04clk: versatile: Depend on HAS_IOMEMStephen Boyd1-0/+1
kbuild robot reports that s390 fails to build this driver with COMPILE_TEST. Let's depend on HAS_IOMEM so that s390 doesn't try to build it. Cc: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Fixes: 419b3ab6987f ("clk: versatile: remove dependency on ARCH_*") Link: https://lore.kernel.org/r/20210604192321.2594519-1-sboyd@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-02clk: tegra: tegra124-emc: Fix clock imbalance in emc_set_timing()Yang Yingliang1-1/+3
After calling clk_prepare_enable(), clk_disable_unprepare() needs be called when prepare_timing_change() failed. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.