aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/clk
AgeCommit message (Collapse)AuthorFilesLines
2020-06-22clk: qcom: smd: Add support for MSM8936 rpm clocksVincent Knecht1-0/+50
Add missing definition of rpm clk for msm8936 soc (also used by msm8939) Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Link: https://lore.kernel.org/r/20200613072745.1249003-2-vincent.knecht@mailoo.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-22clk: renesas: rzg2: Mark RWDT clocks as criticalUlrich Hecht3-0/+3
Ensures RWDT remains alert throughout the boot process if enabled. This patch applies the change to the following SoCs: r8a774a1, r8a774b1 and r8a774c0. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20200616162626.27944-4-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-22clk: renesas: rcar-gen3: Mark RWDT clocks as criticalUlrich Hecht7-5/+7
Ensures RWDT remains alert throughout the boot process if enabled. This patch applies the change to the following SoCs: r8a77950, r8a77951, r8a77960, r8a77961, r8a77965, r8a77970, r8a77980, r8a77990 and r8a77995. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20200616162626.27944-3-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-22clk: renesas: cpg-mssr: Mark clocks as critical only if on at bootUlrich Hecht1-8/+9
This allows us to add the RWDT clock to the list of critical clocks without keeping it enabled needlessly if not used. Changing the semantics of crit_mod_clks in this way is safe for the current user (INTC-AP) because it is never off at boot time. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20200616162626.27944-2-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-22clk: qcom: smd: Add support for SDM660 rpm clocksKonrad Dybcio1-0/+76
Add rpm smd clocks, PMIC and bus clocks which are required on SDM630/660 (and APQ variants) for clients to vote on. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200622090252.36568-1-konradybcio@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-22Merge branch 'clk-doc' into clk-nextStephen Boyd1-0/+15
* clk-doc: clk: add function documentation for clk_hw_round_rate()
2020-06-22clk: add function documentation for clk_hw_round_rate()Sarang Mairal1-0/+15
Information about usage and prerequisites for this API. Signed-off-by: Sarang Mairal <sarangmairal@gmail.com> Link: https://lore.kernel.org/r/20200611021941.786-2-sarangmairal@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-22clk: qcom: Add ipq6018 apss clock controllerSivaprakash Murugesan3-0/+118
The CPU on Qualcomm ipq6018 devices are clocked primarily by a aplha PLL and xo which are connected to a mux and enable block. Add support for the mux and enable block which feeds the CPU on ipq6018 devices. Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> Link: https://lore.kernel.org/r/1592800092-20533-5-git-send-email-sivaprak@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-22clk: qcom: Add ipq apss pll driverSivaprakash Murugesan3-0/+104
The CPUs on Qualcomm ipq based devices are clocked by an alpha PLL. Add support for the apss pll found on ipq based devices which can support CPU frequencies above 1Ghz. Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> Link: https://lore.kernel.org/r/1592800092-20533-3-git-send-email-sivaprak@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: socfpga: agilex: mpu_l2ram_clk should be mpu_ccu_clkDinh Nguyen1-1/+1
Preliminary documentation documented the mpu_l2ram_clk, but since then, the mpu_l2ram_clk is no longer documented. It's now referred to as mpu_ccu_clk. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20200616202417.14376-3-dinguyen@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: socfpga: agilex: add nand_x_clk and nand_ecc_clkDinh Nguyen1-1/+5
And the nand_x_clk and nand_ecc_clk. Make the nand_x_clk be the main clock that is feeding the NAND IP and correct it's parent to be the l4_mp_clk. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20200616202417.14376-2-dinguyen@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Remove the quirks for the CPU clockMaxime Ripard1-164/+0
The CPU clock has had so far a bunch of quirks to expose the clock tree properly, but since we reverted to exposing them through the MMIO driver, we can remove that code from the firmware driver. Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/acdf820c2f78a25dd7480a0c018b8b387acd013e.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm2835: Don't cache the PLLB rateMaxime Ripard1-2/+3
The PLLB rate will be changed through the firmware clocks drivers and will change behind this drivers' back, so we don't want to cache the rate. Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/9864daba2f584ed49aee5ed1d2f4d48507c58197.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm2835: Allow custom CCF flags for the PLLsMaxime Ripard1-1/+2
While some clock types allow for each clock to specify its own custom flags, the PLLs can't. We will need this for the PLLB, so let's add it. Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/ae8bd505d8851f6646e244cd76b6b289346973c8.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19Revert "clk: bcm2835: remove pllb"Maxime Ripard1-4/+26
This reverts commit 2256d89333bd17b8b56b42734a7e1046d52f7fc3. Since we will be expanding the firmware clock driver, we'll need to remove the quirks to deal with the PLLB. However, we still want to expose the clock tree properly, so having that clock in the MMIO driver will allow that. Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/5d26a4c58248f5be7760a7f2f720a1310baea5dd.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Give firmware clocks a nameMaxime Ripard1-1/+20
We've registered the firmware clocks using their ID as name, but it's much more convenient to register them using their proper name. Since the firmware doesn't provide it, we have to duplicate it. Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/a52a5f5768cd33716cdd35237c6613f26ad75013.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Discover the firmware clocksMaxime Ripard1-12/+141
The RaspberryPi4 firmware actually exposes more clocks than are currently handled by the driver and we will need to change some of them directly based on the pixel rate for the display related clocks, or the load for the GPU. Since the firmware implements DVFS, this rate change can have a number of side-effects, including adjusting the various PLL voltages or the PLL parents. The firmware also implements thermal throttling, so even some thermal pressure can change those parameters behind Linux back. DVFS is currently implemented on the arm, core, h264, v3d, isp and hevc clocks, so updating any of them using the MMIO driver (and thus behind the firmware's back) can lead to troubles, the arm clock obviously being the most problematic. In order to make Linux play as nice as possible with those constraints, it makes sense to rely on the firmware clocks as much as possible. However, the firmware doesn't seem to provide some equivalents to their MMIO counterparts, so we can't really replace that driver entirely. Fortunately, the firmware has an interface to discover the clocks it exposes. Let's use it to discover, register the clocks in the clocks framework and then expose them through the device tree for consumers to use them. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/438d73962741a8c5f7c689319b7443b930a87fde.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Add an enum for the firmware clocksMaxime Ripard1-4/+19
While the firmware allows us to discover the available clocks, we need to discriminate those clocks to only register the ones meaningful to Linux. The firmware also doesn't provide a clock name, so having a list of the ID will help us to give clocks a proper name later on. Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/4738f77ee7de9b48a3bb1c558ead958d0cc064d9.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Add DT provider for the clocksMaxime Ripard1-0/+16
For the upcoming registration of the clocks provided by the firmware, make sure it's exposed to the device tree providers. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/4d8dbe4aaae98b3d3812ad7c3dba53d645cadbaf.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Make the PLLB registration function return a clk_hwMaxime Ripard1-22/+24
The raspberrypi_register_pllb has been returning an integer so far to notify whether the functions has exited successfully or not. However, the OF provider functions in the clock framework require access to the clk_hw structure so that we can expose those clocks to device tree consumers. Since we'll want that for the future clocks, let's return a clk_hw pointer instead of the return code. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/97218559db643e62fdd2b5e3046a2a05b8c2e769.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Split pllb clock hooksMaxime Ripard1-8/+22
The driver only supports the pllb for now and all the clock framework hooks are a mix of the generic firmware interface and the specifics of the pllb. Since we will support more clocks in the future let's split the generic and specific hooks Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/fdc21962fdc7de5c46232f198672d5d5c868ec74.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Rename is_prepared functionMaxime Ripard1-2/+2
The raspberrypi_fw_pll_is_on function doesn't only apply to PLL registered in the driver, but any clock exposed by the firmware. Since we also implement the is_prepared hook, make the function consistent with the other function names. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/ac93cc4e245316bb7e7426ac5ab0de8f3d919731.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Pass the clocks data to the firmware functionMaxime Ripard1-15/+14
The raspberry_clock_property only takes the clock ID as an argument, but now that we have a clock data structure it makes more sense to just pass that structure instead. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/d7a3b4df3ca23feb6e0d9c7ae2d232bfb913f926.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Add clock id to dataMaxime Ripard1-9/+9
The driver has really only supported one clock so far and has hardcoded the ID used in communications with the firmware in all the functions implementing the clock framework hooks. Let's store that in the clock data structure so that we can support more clocks later on. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/e23c37961b97b027e21efa3b818578970f88527a.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Create a data structure for the clocksMaxime Ripard1-10/+21
So far the driver has really only been providing a single clock, and stored both the data associated to that clock in particular with the data associated to the "controller". Since we will change that in the future, let's decouple the clock data from the provider data. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/ee7f508db226214fab4add7f93a351f4137c86a1.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Use CCF boundaries instead of rolling our ownMaxime Ripard1-10/+8
The raspberrypi firmware clock driver has a min_rate / max_rate clamping by storing the info it needs in a private structure. However, the CCF already provides such a facility, so we can switch to it to remove the boilerplate. Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/d4c53dab6de5d5f70743d9c139d0117589530e62.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Make sure the clkdev lookup is removedMaxime Ripard1-2/+3
The clkdev lookup created for the cpufreq device is never removed if there's an issue later in probe or at module removal time. Let's convert to the managed variant of the clk_hw_register_clkdev function to make sure it happens. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/075e2c6d315eccdaf8fb72b320712b86e6c25b22.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Switch to clk_hw_register_clkdevMaxime Ripard1-6/+5
Since we don't care about retrieving the clk_lookup structure pointer returned by clkdev_hw_create, we can just use the clk_hw_register_clkdev function. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/59f6208b6fe3367e735b0cca4f65c2c937639af9.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Remove pllb_arm_lookup global pointerMaxime Ripard1-4/+4
The pllb_arm_lookup pointer in the struct raspberrypi_clk is not used for anything but to store the returned pointer to clkdev_hw_create, and is not used anywhere else in the driver. Let's remove that global pointer from the structure. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/189407f54906d2b07c91de7a4eeb6d8c8934280f.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Make sure pllb_arm is removedMaxime Ripard1-2/+1
The pllb_arm clock was created at probe time, but was never removed if something went wrong later in probe, or if the driver was ever removed from the system. Now that we are using clk_hw_register(), we can just use its managed variant to take care of that for us. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/34254ed1556614658e5dad5cca4cf4fe617df7fc.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Remove global pllb_arm clock pointerMaxime Ripard1-4/+3
The pllb_arm clk_hw pointer in the raspberry_clk structure isn't used anywhere but in the raspberrypi_register_pllb_arm. Let's remove it, this will make our lives easier in future patches. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/842859cf1a77478620f45049178a588448202858.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Use clk_hw_register for pllb_armMaxime Ripard1-6/+18
The pllb_arm clock is defined as a fixed factor clock with the pllb clock as a parent. However, all its configuration is entirely static, and thus we don't really need to call clk_hw_register_fixed_factor() but can simply call clk_hw_register() with a static clk_fixed_factor structure. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/1146177664999eeda65856d28ce94025021dd85e.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Statically init clk_init_dataMaxime Ripard1-2/+1
Instead of declaring the clk_init_data and then calling memset on it, just initialise properly. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/0342572daa561dc1bb4c9fd10641b2016493e32b.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Allow the driver to be probed by DTMaxime Ripard1-2/+17
The current firmware clock driver for the RaspberryPi can only be probed by manually registering an associated platform_device. While this works fine for cpufreq where the device gets attached a clkdev lookup, it would be tedious to maintain a table of all the devices using one of the clocks exposed by the firmware. Since the DT on the other hand is the perfect place to store those associations, make the firmware clocks driver probe-able through the device tree so that we can represent it as a node. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/cb8203b862e386ac6c3df3eff0bb5a238b6ec97a.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: Add BCM2711 DVP driverMaxime Ripard3-0/+132
The HDMI block has a block that controls clocks and reset signals to the HDMI0 and HDMI1 controllers. Let's expose that through a clock driver implementing a clock and reset provider. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-clk@vger.kernel.org Cc: devicetree@vger.kernel.org Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/bb60d97fc76b61c2eabef5a02ebd664c0f57ede0.1591867332.git-series.maxime@cerno.tech Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm63xx-gate: switch to dt-bindings definitionsÁlvaro Fernández Rojas1-141/+439
Now that there are header files for each SoC, let's use them in the bcm63xx-gate controller driver. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20200615090231.2932696-9-noltari@gmail.com Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm63xx-gate: add BCM6318 supportÁlvaro Fernández Rojas1-0/+44
Add support for the gated clock controllers found on the BCM6318. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20200610140858.207329-3-noltari@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm63xx-gate: fix last clock availabilityÁlvaro Fernández Rojas1-0/+1
In order to make the last clock available, maxbit has to be set to the highest bit value plus 1. Fixes: 1c099779c1e2 ("clk: add BCM63XX gated clock controller driver") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20200609110846.4029620-1-noltari@gmail.com Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: meson: g12a: Add support for NNA CLK source clocksDmitry Shmidt2-1/+125
This adds the Neural Network Accelerator source clocks hierarchy, it's 2 simple composite clocks to feed the AXI interface and the Core of the Neural Network Accelerator IP. This IP is only present on the Amlogic SM1 SoCs family. Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20200610083012.5024-3-narmstrong@baylibre.com
2020-06-17clk: pwm: Use 64-bit division functionGuru Das Srinagesh1-1/+6
Since the PWM framework is switching struct pwm_args.period's datatype to u64, prepare for this transition by using div64_u64() to handle a 64-bit divisor. Also ensure that divide-by-zero (with fixed_rate as denominator) does not happen with an explicit check with probe failure as a consequence. Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-06-17clk: rockchip: Handle clock tree for rk3288w variantMylène Josserand1-2/+18
The revision rk3288w has a different clock tree about "hclk_vio" clock, according to the BSP kernel code. This patch handles this difference by detecting which device-tree we are using. If it is a "rockchip,rk3288-cru", let's register the clock tree as it was before. If the device-tree node is "rockchip,rk3288w-cru", we will apply the difference with this version of this SoC. Noticed that this new device-tree compatible must be handled in bootloader such as u-boot. Signed-off-by: Mylène Josserand <mylene.josserand@collabora.com> Link: https://lore.kernel.org/r/20200602080644.11333-2-mylene.josserand@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-06-15clk: rockchip: convert rk3036 pll type to use internal lock statusHeiko Stuebner1-3/+23
The rk3036 pll type exposes its lock status in both its pllcon registers as well as the General Register Files. To remove one dependency convert it to the "internal" lock status, similar to how rk3399 handles it. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20200129163821.1547295-3-heiko@sntech.de
2020-06-15clk: rockchip: convert basic pll lock_wait to use regmap_read_poll_timeoutHeiko Stuebner1-15/+6
Instead of open coding the polling of the lock status, use the handy regmap_read_poll_timeout for this. As the pll locking is normally blazingly fast and we don't want to incur additional delays, we're not doing any sleeps similar to for example the imx clk-pllv4 and define a very safe but still short timeout of 1ms. Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20200129163821.1547295-2-heiko@sntech.de
2020-06-15clk: rockchip: convert rk3399 pll type to use readl_relaxed_poll_timeoutHeiko Stuebner1-11/+12
Instead of open coding the polling of the lock status, use the handy readl_relaxed_poll_timeout for this. As the pll locking is normally blazingly fast and we don't want to incur additional delays, we're not doing any sleeps similar to for example the imx clk-pllv4 and define a very safe but still short timeout of 1ms. Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20200129163821.1547295-1-heiko@sntech.de
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada6-60/+60
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-10Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds130-608/+13259
Pull clk updates from Stephen Boyd: "This time around we have four lines of diff in the core framework, removing a function that isn't used anymore. Otherwise the main new thing for the common clk framework is that it is selectable in the Kconfig language now. Hopefully this will let clk drivers and clk consumers be testable on more than the architectures that support the clk framework. The goal is to introduce some Kunit tests for the framework. Outside of the core framework we have the usual set of various driver updates and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the largest addition this time around in terms of lines of code. After that the x86 (Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or upcoming SoCs. After that the dirstat shows the usual suspects working on their SoC support by fixing minor bugs, correcting data and converting some of their DT bindings to YAML. Core: - Allow the COMMON_CLK config to be selectable New Drivers: - Clk driver for Baikal-T1 SoCs - Mediatek MT6765 clock support - Support for Intel Agilex clks - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for the new Renesas RZ/G1H (R8A7742) SoC - Add support for Qualcomm's MSM8939 Generic Clock Controller Updates: - Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips - Support custom flags in Xilinx zynq firmware - Various small fixes to the Xilinx clk driver - A single minor rounding fix for the legacy Allwinner clock support - A few patches from Abel Vesa as preparation of adding audiomix clock support on i.MX - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3 drivers - Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on aarch64 hardware - A series from Peng Fan to improve i.MX8M clock drivers, using composite clock for core and bus clk slice - Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined bit rates - A couple changes for EMC frequency scaling on Tegra210 - Support for CPU frequency scaling on Tegra20/Tegra30 - New clk gate for CSI test pattern generator on Tegra210 - Regression fixes for Samsung exynos542x and exynos5433 SoCs - Use of fallthrough; attribute for Samsung s3c24xx - Updates and fixup HDMI and video clocks on Meson8b - Fixup reset polarity on Meson8b - Fix GPU glitch free mux switch on Meson gx and g12 - A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2 - Two more conversions of Renesas DT bindings to json-schema - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits) clk: mediatek: Remove ifr{0,1}_cfg_regs structures clk: baikal-t1: remove redundant assignment to variable 'divider' clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible" dt-bindings: clock: Add a missing include to MMP Audio Clock binding dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first clk: clk-si5341: Add support for the Si5345 series ...
2020-06-09clk: mediatek: Remove ifr{0,1}_cfg_regs structuresStephen Boyd1-30/+0
These aren't used and the macros that reference them aren't used either. Remove the dead code to avoid compile warnings. Cc: Owen Chen <owen.chen@mediatek.com> Cc: Mars Cheng <mars.cheng@mediatek.com> Cc: Macpaul Lin <macpaul.lin@mediatek.com> Fixes: 1aca9939bf72 ("clk: mediatek: Add MT6765 clock support") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20200609211847.27366-1-sboyd@kernel.org
2020-06-09clk: baikal-t1: remove redundant assignment to variable 'divider'Colin Ian King1-1/+1
The variable divider is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200602172435.70282-1-colin.king@canonical.com Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-09clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible"Colin Ian King1-1/+1
There is a spelling mistake in a pr_err error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200602121030.39132-1-colin.king@canonical.com Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-07Merge tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds5-48/+25
Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc driver patches for 5.8-rc1 Included in here are: - habanalabs driver updates, loads - mhi bus driver updates - extcon driver updates - clk driver updates (approved by the clock maintainer) - firmware driver updates - fpga driver updates - gnss driver updates - coresight driver updates - interconnect driver updates - parport driver updates (it's still alive!) - nvmem driver updates - soundwire driver updates - visorbus driver updates - w1 driver updates - various misc driver updates In short, loads of different driver subsystem updates along with the drivers as well. All have been in linux-next for a while with no reported issues" * tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits) habanalabs: correctly cast u64 to void* habanalabs: initialize variable to default value extcon: arizona: Fix runtime PM imbalance on error extcon: max14577: Add proper dt-compatible strings extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()' extcon: remove redundant assignment to variable idx w1: omap-hdq: print dev_err if irq flags are not cleared w1: omap-hdq: fix interrupt handling which did show spurious timeouts w1: omap-hdq: fix return value to be -1 if there is a timeout w1: omap-hdq: cleanup to add missing newline for some dev_dbg /dev/mem: Revoke mappings when a driver claims the region misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages() misc: xilinx-sdfec: cleanup return value in xsdfec_table_write() misc: xilinx-sdfec: improve get_user_pages_fast() error handling nvmem: qfprom: remove incorrect write support habanalabs: handle MMU cache invalidation timeout habanalabs: don't allow hard reset with open processes habanalabs: GAUDI does not support soft-reset habanalabs: add print for soft reset due to event habanalabs: improve MMU cache invalidation code ...
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.