aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/clk
AgeCommit message (Collapse)AuthorFilesLines
2019-12-11clk: meson: meson8b: use clk_hw_set_parent in the CPU clock notifierMartin Blumenstingl1-13/+8
Switch from clk_set_parent() to clk_hw_set_parent() now that we have a way to configure a mux clock based on clk_hw pointers. This simplifies the meson8b_cpu_clk_notifier_cb logic. No functional changes. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-12-11clk: meson: add a driver for the Meson8/8b/8m2 DDR clock controllerMartin Blumenstingl2-1/+150
The Meson8/Meson8b/Meson8m2 SoCs embed a DDR clock controller in the MMCBUS registers. There is no public documentation, but the u-boot GPL sources from the Amlogic BSP show that the DDR clock controller is identical on all three SoCs: #define CFG_DDR_CLK 792 #define CFG_PLL_M (((CFG_DDR_CLK/12)*12)/24) #define CFG_PLL_N 1 #define CFG_PLL_OD 1 // from set_ddr_clock: t_ddr_pll_cntl= (CFG_PLL_OD << 16)|(CFG_PLL_N<<9)|(CFG_PLL_M<<0) writel(timing_reg->t_ddr_pll_cntl|(1<<29),AM_DDR_PLL_CNTL); writel(readl(AM_DDR_PLL_CNTL) & (~(1<<29)),AM_DDR_PLL_CNTL); // from hx_ddr_power_down_enter: shut down DDR PLL writel(readl(AM_DDR_PLL_CNTL)|(1<<30),AM_DDR_PLL_CNTL); do { ... } while((readl(AM_DDR_PLL_CNTL)&(1<<31))==0) This translates to: - AM_DDR_PLL_CNTL[29] is the reset bit - AM_DDR_PLL_CNTL[30] is the enable bit - AM_DDR_PLL_CNTL[31] is the lock bit - AM_DDR_PLL_CNTL[8:0] is the m value (assuming the width is 9 bits based on the start of the n value) - AM_DDR_PLL_CNTL[13:9] is the n value (assuming the width is 5 bits based on the start of the od) - AM_DDR_PLL_CNTL[17:16] is the od (assuming the width is 2 bits based on other PLLs on this SoC) Add a driver for this PLL setup because it's used as one of the inputs of the audio clocks. There may be more clocks inside that clock controller - those can be added in subsequent patches. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-12-11clk: imx7up: Rename the clks to hwsAbel Vesa1-90/+90
This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: Rename the imx_clk_divider_gate to imply it's clk_hw basedAbel Vesa3-6/+6
Renaming the imx_clk_divider_gate register function to imx_clk_hw_divider_gate to be more obvious it is clk_hw based. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: Rename the imx_clk_pfdv2 to imply it's clk_hw basedAbel Vesa3-10/+10
Renaming the imx_clk_pfdv2 register function to imx_clk_hw_pfdv2 to be more obvious it is clk_hw based. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: Rename the imx_clk_pllv4 to imply it's clk_hw basedAbel Vesa3-4/+4
Renaming the imx_clk_pllv4 register function to imx_clk_hw_pllv4 to be more obvious it is clk_hw based. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: Rename sccg and frac pll register to suggest clk_hwAbel Vesa3-7/+16
Renaming the imx_clk_frac_pll and imx_clk_sccg_pll register functions to imx_clk_hw_frac_pll, respectively imx_clk_hw_sccg_pll to be more obvious that they are clk_hw based. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: imx7ulp composite: Rename to show is clk_hw basedAbel Vesa3-28/+28
Renaming the imx7ulp_clk_composite register function to imx7ulp_clk_hw_composite to show it is clk_hw based. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: pllv2: Switch to clk_hw based APIAbel Vesa2-6/+13
Switch the imx_clk_pllv2 register function to clk_hw based API, rename accordingly and add a macro for clk based legacy. This allows us to move closer to a clear split between consumer and provider clk APIs. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: pllv1: Switch to clk_hw based APIAbel Vesa2-6/+13
Switch the imx_clk_pllv1 register function to clk_hw based API, rename accordingly and add a macro for clk based legacy. This allows us to move closer to a clear split between consumer and provider clk APIs. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: Replace all the clk based helpers with macrosAbel Vesa1-27/+12
Replacing with macros all the clk based API helpers we reduce the code duplication. The end goal is to get rid of all these macros when there will be no more users of the clk based API, that is, when all the i.MX clock provider drivers will be switched completely to the clk_hw based API. This is another step in moving away from the non clk_hw based API usage throughout the i.MX clock drivers. The reason for doing that is to have a clear split between the clock provider and the clock consumer API. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: Rename the SCCG to SSCGAbel Vesa4-81/+81
According to the manual the acronym stands for Spread Sprectum Clock Generator. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: Add correct failure handling for clk based helpersAbel Vesa1-15/+22
If the clk_hw based API returns an error, trying to return the clk from hw will end up in a NULL pointer dereference. So adding the to_clk checker and using it inside every clk based macro helper we handle that case correctly. This to_clk is also temporary and will go away along with the clk based macro helpers once there is no user that need them anymore. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx8qxp-lpcg: Warn against devm_platform_ioremap_resourceLeonard Crestez1-0/+11
On imx8 the LPCG nodes map entire subsystems and overlap peripherals, this means that using devm_platform_ioremap_resource will cause many devices to fail to probe including serial ports. Well-meaning but boot-breaking patches were posted multiple times so add a comment explaining this issue. Suggested-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: pll14xx: fix clk_pll14xx_wait_lockPeng Fan1-1/+1
The usage of readl_poll_timeout is wrong, the 3rd parameter(cond) should be "val & LOCK_STATUS" not "val & LOCK_TIMEOUT_US", It is not check whether the pll locked, LOCK_STATUS reflects the mask, not LOCK_TIMEOUT_US. Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc") Cc: <stable@vger.kernel.org> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx8mn: correct the usb1_ctrl parent to be usb_busLi Jun1-1/+1
Per latest imx8mn datasheet of CCM, the parent of usb1_ctrl_root_clk should be usb_bus. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-10clk: renesas: rcar-gen2: Change multipliers and dividers to u8Geert Uytterhoeven1-4/+4
All multipliers and dividers are small. Storing them in u8 instead of unsigned int reduces kernel size for a generic kernel by ca. 0.5 KiB. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20191206133254.23800-1-geert+renesas@glider.be
2019-12-09clk: sunxi-ng: v3s: Fix incorrect number of hw_clks.Yunhao Tian2-4/+2
The hws field of sun8i_v3s_hw_clks has only 74 members. However, the number specified by CLK_NUMBER is 77 (= CLK_I2S0 + 1). This leads to runtime segmentation fault that is not always reproducible. This patch fixes the problem by specifying correct clock number. Signed-off-by: Yunhao Tian <18373444@buaa.edu.cn> [Maxime: Also remove the CLK_NUMBER definition] Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-09clk: sunxi: use of_device_get_match_dataCorentin Labbe1-4/+2
The usage of of_device_get_match_data reduce the code size a bit. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-09clk: imx: clk-imx7ulp: Add missing sentinel of ulp_div_tablePeng Fan1-0/+1
There should be a sentinel of ulp_div_table, otherwise _get_table_div may access data out of the array. Fixes: b1260067ac3d ("clk: imx: add imx7ulp clk driver") Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-09clk: imx8m: Suppress bind attrsLeonard Crestez3-0/+15
The clock drivers on imx8m series are registered as platform devices and this opens the possibility of reloading the driver at runtime. This doesn't actually work: clocks are never removed and attempting to bind again results in registration errors and a crash. Almost all devices depend on clocks anyway so rebinding is unlikely to ever be useful Fix this by explicitly suppressing bind attrs like several other clock drivers. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-09clk: imx7ulp: Fix watchdog2 clock name typoFabio Estevam1-1/+1
There is a typo in the watchdog2 clock name. Fix it by changing it to "wdg2". Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-09clk: imx6q: disable non functional dividerJan Remmet1-1/+4
The /2 divider between pll4_audio_div and pll4_post_div is not working on imx6q. The frequency is not halved as reported by the clock tree and measured on clko. In the technical reference manual the divider was removed in revision 4. It's also not listed in the imx6qp manual. imx6dl manual mentions a divider for PLL4 and the according register description. So keep the divider here. Signed-off-by: Jan Remmet <j.remmet@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-09clk: imx: Mark dram pll on 8mm and 8mn with CLK_GET_RATE_NOCACHELeonard Crestez4-2/+10
DRAM frequency switches are executed in firmware and can change the configuration of the DRAM PLL outside linux. Mark these CLKs with CLK_GET_RATE_NOCACHE so we always read back the PLL config registers and recalculate rates. In current DRAM frequency tables on 8mm/8mn only the maximum frequency uses the PLL so it's always configured in the same way. However reading back the PLL configuration is the correct behavior and allows additional setpoints in the future. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-09clk: imx8m: Set CLK_GET_RATE_NOCACHE on dram clocksLeonard Crestez3-8/+23
These clocks are only modified as part of DRAM frequency switches during which DRAM itself is briefly inaccessible. The switch is performed with a SMC call to by TF-A which runs from a SRAM area; upon returning to linux several clocks bits are modified and we need to update them. For rate bits an easy solution is to just mark with CLK_GET_RATE_NOCACHE so that new rates are always read back from registers. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-09clk: imx: clk-composite-8m: add lock to gate/muxPeng Fan1-0/+2
There is a lock to divider in the composite driver, but that's not enough. lock to gate/mux are also needed to provide exclusive access to the register. Fixes: d3ff9728134e ("clk: imx: Add imx composite clock") Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-09clk: imx: clk-divider-gate: drop redundant initializationPeng Fan1-4/+4
There is no need to initialize flags as 0. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-09clk: imx: clk-divider-gate: fix a typo in commentPeng Fan1-1/+1
Fix a typo in comment: resue -> reuse. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-05Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2-1/+6
Pull ARM SoC platform updates from Olof Johansson: "Most of these are for MMP (seeing a bunch of cleanups and refactorings for the first time in a while), and for OMAP (a bunch of cleanups and added support for voltage controller on OMAP4430)" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits) ARM: OMAP2+: Add missing put_device() call in omapdss_init_of() OMAP2: fixup doc comments in omap_device ARM: OMAP1: drop duplicated dependency on ARCH_OMAP1 ARM: ASPEED: update default ARCH_NR_GPIO for ARCH_ASPEED ARM: imx: use generic function to exit coherency ARM: tegra: Use WFE for power-gating on Tegra30 ARM: tegra: Fix FLOW_CTLR_HALT register clobbering by tegra_resume() ARM: exynos: Enable exynos-asv driver for ARCH_EXYNOS ARM: s3c: Rename s5p_usb_phy functions ARM: s3c: Rename s3c64xx_spi_setname() function ARM: imx: Add serial number support for i.MX6/7 SoCs ARM: imx: Drop imx_anatop_usb_chrg_detect_disable() arm64: Introduce config for S32 ARM: hisi: drop useless depend on ARCH_MULTI_V7 arm64: realtek: Select reset controller ARM: shmobile: rcar-gen2: Drop legacy DT clock support ARM: OMAP2+: Remove duplicated include from pmic-cpcap.c ARM: OMAP1: ams-delta FIQ: Fix a typo ("Initiaize") MAINTAINERS: Add logicpd-som-lv and logicpd-torpedo to OMAP TREE ARM: OMAP2+: pdata-quirks: drop TI_ST/KIM support ...
2019-12-05Merge branch 'thermal/next' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linuxLinus Torvalds3-3/+3
Pull thermal management updates from Zhang Rui: - Fix a deadlock regression in thermal core framework, which was introduced in 5.3 (Wei Wang) - Initialize thermal control framework earlier to enable thermal mitigation during boot (Amit Kucheria) - Convert the Intelligent Power Allocator (IPA) thermal governor to follow the generic PM_EM instead of its own Energy Model (Quentin Perret) - Introduce a new Amlogic soc thermal driver (Guillaume La Roque) - Add interrupt support for tsens thermal driver (Amit Kucheria) - Add support for MSM8956/8976 in tsens thermal driver (AngeloGioacchino Del Regno) - Add support for r8a774b1 in rcar thermal driver (Biju Das) - Add support for Thermal Monitor Unit v2 in qoriq thermal driver (Yuantian Tang) - Some other fixes/cleanups on thermal core framework and soc thermal drivers (Colin Ian King, Daniel Lezcano, Hsin-Yi Wang, Tian Tao) * 'thermal/next' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (32 commits) thermal: Fix deadlock in thermal thermal_zone_device_check thermal: cpu_cooling: Migrate to using the EM framework thermal: cpu_cooling: Make the power-related code depend on IPA PM / EM: Declare EM data types unconditionally arm64: defconfig: Enable CONFIG_ENERGY_MODEL drivers: thermal: tsens: fix potential integer overflow on multiply thermal: cpu_cooling: Reorder the header file thermal: cpu_cooling: Remove pointless dependency on CONFIG_OF thermal: no need to set .owner when using module_platform_driver thermal: qcom: tsens-v1: Fix kfree of a non-pointer value cpufreq: qcom-hw: Move driver initialization earlier clk: qcom: Initialize clock drivers earlier cpufreq: Initialize cpufreq-dt driver earlier cpufreq: Initialize the governors in core_initcall thermal: Initialize thermal subsystem earlier thermal: Remove netlink support dt: thermal: tsens: Document compatible for MSM8976/56 thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976 MAINTAINERS: add entry for Amlogic Thermal driver thermal: amlogic: Add thermal driver to support G12 SoCs ...
2019-12-01Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds115-2238/+7933
Pull clk updates from Stephen Boyd: "This merge window we have one small clk provider API in the core framework and then a bunch of driver updates and a handful of new drivers. In terms of diffstat the Qualcomm and Amlogic drivers are high up there because of all the clk data introcued by new drivers. The Nvidia Tegra driver had a lot of work done this cycle too to support suspend/resume and memory controllers. And the OMAP clk driver got proper clk and reset handling in place. Rounding out the patches are various updates to remove unused data, mark things static, correct incorrect data in drivers, etc. All the little things that improve drivers and maintain code health. I will point out that there's a patch in here for the GPIO clk driver, that almost nobody uses, which changes behavior and causes clk_set_rate() to try to change the GPIO gate clk's parent. Other than that things are fairly well SoC specific here. Core: - Add a clk provider API to get current parent index - Plug a memory leak in clk_unregister() path New Drivers: - CGU in Ingenix X1000 - Bitmain BM1880 clks - Qualcomm MSM8998 GPU clk controllers - Qualcomm SC7180 GCC and RPMH clk controllers - Qualcomm QCS404 Q6SSTOP clk controllers - Add support for the Renesas R-Car M3-W+ (r8a77961) SoC - Add support for the Renesas RZ/G2N (r8a774b1) SoC - Add Tegra20/30 External Memory Clock (EMC) support Updates: - Make gpio gate clks propagate rate setting up to parent - Prepare Armada 3700 for suspend to RAM by moving PCIe suspend/resume priority - Drop unused variables, enums, etc. in various clk drivers - Convert various drivers to use devm_platform_ioremap_resource() - Use struct_size() some more in various clk drivers - Improve Rockchip px30 clk tree - Add suspend/resume support to Tegra210 clk driver - Reimplement SOR clks on earlier Tegra SoCs, helping HDMI and DP - Allwinner DT exports and H6 clk tree fixes - Proper clk and reset handling for OMAP SoCs - Revamped TI divider clk to clamp max divider - Make 1443X/1416X PLL clock structure common for reusing among i.MX8 SoCs - Drop IMX7ULP_CLK_MIPI_PLL clock, it shouldn't be used - Add VIDEO2_PLL clock for imx8mq - Add missing gate clock for pll1/2 fixed dividers on i.MX8 SoCs - Add sm1 support in the Amlogic audio clock controller - Switch some clocks on R-Car Gen2/3 to .determine_rate() - Remove Renesas R-Car Gen2 legacy DT clock support - Improve arithmetic divisions on Renesas R-Car Gen2 and Gen3 - Improve Renesas R-Car Gen3 SD clock handling - Add rate table for Samsung exynos542x GPU and VPLL clks - Fix potential CPU performance degradation after system suspend/resume cycle on exynos542x SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (160 commits) clk: aspeed: Add RMII RCLK gates for both AST2500 MACs MAINTAINERS: Add entry for BM1880 SoC clock driver clk: Add common clock driver for BM1880 SoC dt-bindings: clock: Add devicetree binding for BM1880 SoC clk: Add clk_hw_unregister_composite helper function definition clk: Zero init clk_init_data in helpers clk: ingenic: Allow drivers to be built with COMPILE_TEST MAINTAINERS: Update section for Ux500 clock drivers clk: mark clk_disable_unused() as __init clk: Fix memory leak in clk_unregister() clk: Ingenic: Add CGU driver for X1000. dt-bindings: clock: Add X1000 bindings. clk: tegra: Use match_string() helper to simplify the code clk: pxa: fix one of the pxa RTC clocks clk: sprd: Use IS_ERR() to validate the return value of syscon_regmap_lookup_by_phandle() clk: armada-xp: remove unused code clk: tegra: Fix build error without CONFIG_PM_SLEEP clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP clk: tegra: Optimize PLLX restore on Tegra20/30 clk: tegra: Add suspend and resume support on Tegra210 ...
2019-11-27Merge branches 'clk-ingenic', 'clk-init-leak', 'clk-ux500' and 'clk-bitmain' into clk-nextStephen Boyd12-10/+1284
- Support CGU in Ingenix X1000 - Support Bitmain BM1880 clks * clk-ingenic: clk: ingenic: Allow drivers to be built with COMPILE_TEST clk: Ingenic: Add CGU driver for X1000. dt-bindings: clock: Add X1000 bindings. * clk-init-leak: clk: mark clk_disable_unused() as __init clk: Fix memory leak in clk_unregister() * clk-ux500: MAINTAINERS: Update section for Ux500 clock drivers * clk-bitmain: MAINTAINERS: Add entry for BM1880 SoC clock driver clk: Add common clock driver for BM1880 SoC dt-bindings: clock: Add devicetree binding for BM1880 SoC clk: Add clk_hw_unregister_composite helper function definition clk: Zero init clk_init_data in helpers
2019-11-27Merge branches 'clk-gpio-flags', 'clk-tegra', 'clk-rockchip', 'clk-sprd' and 'clk-pxa' into clk-nextStephen Boyd28-208/+1029
- Make gpio gate clks propagate rate setting up to parent * clk-gpio-flags: clk: clk-gpio: propagate rate change to parent * clk-tegra: (23 commits) clk: tegra: Use match_string() helper to simplify the code clk: tegra: Fix build error without CONFIG_PM_SLEEP clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP clk: tegra: Optimize PLLX restore on Tegra20/30 clk: tegra: Add suspend and resume support on Tegra210 clk: tegra: Share clk and rst register defines with Tegra clock driver clk: tegra: Use fence_udelay() during PLLU init clk: tegra: clk-dfll: Add suspend and resume support clk: tegra: clk-super: Add restore-context support clk: tegra: clk-super: Fix to enable PLLP branches to CPU clk: tegra: periph: Add restore_context support clk: tegra: Support for OSC context save and restore clk: tegra: pll: Save and restore pll context clk: tegra: pllout: Save and restore pllout context clk: tegra: divider: Save and restore divider rate clk: tegra: Reimplement SOR clocks on Tegra210 clk: tegra: Reimplement SOR clock on Tegra124 clk: tegra: Rename sor0_lvds to sor0_out clk: tegra: Move SOR0 implementation to Tegra124 clk: tegra: Remove last remains of TEGRA210_CLK_SOR1_SRC ... * clk-rockchip: clk: rockchip: protect the pclk_usb_grf as critical on px30 clk: rockchip: add video-related niu clocks as critical on px30 clk: rockchip: move px30 critical clocks to correct clock controller clk: rockchip: Add div50 clocks for px30 sdmmc, emmc, sdio and nandc clk: rockchip: Add div50 clock-ids for sdmmc on px30 and nandc clk: rockchip: make clk_half_divider_ops static * clk-sprd: clk: sprd: Use IS_ERR() to validate the return value of syscon_regmap_lookup_by_phandle() * clk-pxa: clk: pxa: fix one of the pxa RTC clocks
2019-11-27Merge branches 'clk-ti', 'clk-allwinner', 'clk-qcom', 'clk-sa' and 'clk-aspeed' into clk-nextStephen Boyd32-297/+3480
- Qualcomm MSM8998 GPU clk controllers - Qualcomm SC7180 GCC and RPMH clk controllers - Qualcomm QCS404 Q6SSTOP clk controllers - Use struct_size() some more in various clk drivers * clk-ti: clk/ti/adpll: allocate room for terminating null ARM: dts: omap3: fix DPLL4 M4 divider max value clk: ti: divider: convert to use min,max,mask instead of width clk: ti: divider: cleanup ti_clk_parse_divider_data API clk: ti: divider: cleanup _register_divider and ti_clk_get_div_table clk: ti: am43xx: drop idlest polling from gfx clock clk: ti: am33xx: drop idlest polling from gfx clock clk: ti: am33xx: drop idlest polling from pruss clkctrl clock clk: ti: am43xx: drop idlest polling from pruss clkctrl clock clk: ti: omap5: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: omap4: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: dra7xx: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: omap5: add IVA subsystem clkctrl data dt-bindings: clk: add omap5 iva clkctrl definitions clk: ti: clkctrl: add new exported API for checking standby info clk: ti: clkctrl: convert to use bit helper macros instead of bitops clk: ti: clkctrl: fix setting up clkctrl clocks * clk-allwinner: clk: sunxi-ng: h3: Export MBUS clock clk: sunxi-ng: h6: Allow GPU to change parent rate clk: sunxi-ng: h6: Use sigma-delta modulation for audio PLL * clk-qcom: clk: qcom: rpmh: Reuse sdm845 clks for sm8150 clk: qcom: Add MSM8998 GPU Clock Controller (GPUCC) driver clk: qcom: Allow constant ratio freq tables for rcg clk: qcom: smd: Add missing pnoc clock clk: qcom: Enumerate clocks and reset needed to boot the 8998 modem clk: qcom: clk-rpmh: Add support for RPMHCC for SC7180 dt-bindings: clock: Introduce RPMHCC bindings for SC7180 dt-bindings: clock: Add YAML schemas for the QCOM RPMHCC clock bindings clk: qcom: Add Global Clock controller (GCC) driver for SC7180 dt-bindings: clock: Add sc7180 GCC clock binding dt-bindings: clock: Add YAML schemas for the QCOM GCC clock bindings clk: qcom: common: Return NULL from clk_hw OF provider clk: qcom: rcg: update the DFS macro for RCG clk: qcom: remove unneeded semicolon clk: qcom: Add Q6SSTOP clock controller for QCS404 dt-bindings: clock: qcom: Add QCOM Q6SSTOP clock controller bindings * clk-sa: drivers/clk: convert VL struct to struct_size * clk-aspeed: clk: aspeed: Add RMII RCLK gates for both AST2500 MACs clk: ast2600: Add RMII RCLK gates for all four MACs dt-bindings: clock: Add AST2600 RMII RCLK gate definitions dt-bindings: clock: Add AST2500 RMII RCLK definitions
2019-11-27Merge branches 'clk-hisi', 'clk-amlogic', 'clk-samsung', 'clk-renesas' and 'clk-imx' into clk-nextStephen Boyd28-1529/+2057
* clk-hisi: clk: hi6220: use CLK_OF_DECLARE_DRIVER * clk-amlogic: clk: meson: axg-audio: use devm_platform_ioremap_resource() to simplify code clk: meson: axg_audio: add sm1 support clk: meson: axg-audio: provide clk top signal name clk: meson: axg-audio: prepare sm1 addition clk: meson: axg-audio: fix regmap last register clk: meson: axg-audio: remove useless defines dt-bindings: clock: meson: add sm1 resets to the axg-audio controller dt-bindings: clk: axg-audio: add sm1 bindings clk: meson: g12a: set CLK_MUX_ROUND_CLOSEST on the cpu clock muxes clk: meson: g12a: fix cpu clock rate setting clk: meson: gxbb: let sar_adc_clk_div set the parent clock rate * clk-samsung: clk: samsung: exynos5420: Add SET_RATE_PARENT flag to clocks on G3D path clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume clk: samsung: exynos5420: Add VPLL rate table clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU clk: samsung: exynos5433: Fix error paths * clk-renesas: (23 commits) clk: renesas: r8a7796: Add R8A77961 CPG/MSSR support clk: renesas: Rename CLK_R8A7796 to CLK_R8A77960 dt-bindings: clock: renesas: cpg-mssr: Document r8a77961 support clk: renesas: r8a77965: Remove superfluous semicolon dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix typo in example dt-bindings: clock: renesas: Remove R-Car Gen2 legacy DT bindings dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions dt-bindings: power: Add r8a77961 SYSC power domain definitions clk: renesas: rcar-gen3: Switch SD clocks to .determine_rate() clk: renesas: rcar-gen3: Switch Z clocks to .determine_rate() clk: renesas: rcar-gen2: Switch Z clock to .determine_rate() clk: renesas: r8a774b1: Add TMU clock clk: renesas: cpg-mssr: Add r8a774b1 support dt-bindings: clock: renesas: cpg-mssr: Document r8a774b1 binding clk: renesas: rcar-gen3: Loop to find best rate in cpg_sd_clock_round_rate() clk: renesas: rcar-gen3: Absorb cpg_sd_clock_calc_div() clk: renesas: rcar-gen3: Avoid double table iteration in SD .set_rate() clk: renesas: rcar-gen3: Improve arithmetic divisions clk: renesas: rcar-gen2: Improve arithmetic divisions clk: renesas: Remove R-Car Gen2 legacy DT clock support ... * clk-imx: clk: imx: imx8mq: fix sys3_pll_out_sels clk: imx7ulp: do not export out IMX7ULP_CLK_MIPI_PLL clock clk: imx: imx6ul: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx6sx: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx6sll: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx7d: use imx_obtain_fixed_clk_hw to simplify code clk: imx7ulp: Correct DDR clock mux options clk: imx7ulp: Correct system clock source option #7 clk: imx: imx8mq: mark sys1/2_pll as fixed clock clk: imx: imx8mn: mark sys_pll1/2 as fixed clock clk: imx: imx8mm: mark sys_pll1/2 as fixed clock clk: imx8mn: Define gates for pll1/2 fixed dividers clk: imx8mm: Define gates for pll1/2 fixed dividers clk: imx8mq: Define gates for pll1/2 fixed dividers clk: imx: clk-pll14xx: Make two variables static clk: imx8mq: Add VIDEO2_PLL clock clk: imx8mn: Use common 1443X/1416X PLL clock structure clk: imx8mm: Move 1443X/1416X PLL clock structure to common place clk: imx: pll14xx: Fix quick switch of S/K parameter
2019-11-27Merge branches 'clk-rohm', 'clk-hisilicon', 'clk-marvell', 'clk-unused' and 'clk-devm-ioremap-resource' into clk-nextStephen Boyd21-199/+130
- Prepare Armada 3700 for suspend to RAM by moving suspend/resume priority for PCIe - Drop unused variables, enums, etc. in various clk drivers - Convert various drivers to use devm_platform_ioremap_resource() * clk-rohm: clk: bd718x7: Add MODULE_ALIAS() * clk-hisilicon: clk: hisilicon: fix sparse warnings in clk-hi3660.c clk: hisilicon: fix sparse warnings in clk-hi3670.c * clk-marvell: dt-bindings: clk: armada3700: document the PCIe clock dt-bindings: clk: armada3700: fix typo in SoC name clk: mvebu: armada-37xx-periph: change suspend/resume time clk: mvebu: armada-37xx-periph: add PCIe gated clock * clk-unused: clk: armada-xp: remove unused code clk: imx: imx8mn: drop unused pll enum clk: ast2600: remove unused variable 'eclk_parent_names' * clk-devm-ioremap-resource: clk: sprd: Change to use devm_platform_ioremap_resource() clk: s3c2410: use devm_platform_ioremap_resource() to simplify code clk: axs10x: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt6797: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt7629: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt7622: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt8183: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt6779: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt2712: use devm_platform_ioremap_resource() to simplify code clk: davinci: use devm_platform_ioremap_resource() to simplify code clk: hisilicon: use devm_platform_ioremap_resource() to simplify code clk: bcm2835: use devm_platform_ioremap_resource() to simplify code
2019-11-26clk: aspeed: Add RMII RCLK gates for both AST2500 MACsAndrew Jeffery1-1/+26
RCLK is a fixed 50MHz clock derived from HPLL that is described by a single gate for each MAC. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lkml.kernel.org/r/20191010020655.3776-3-andrew@aj.id.au Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-22clk: Add common clock driver for BM1880 SoCManivannan Sadhasivam3-0/+977
Add common clock driver for Bitmain BM1880 SoC. The clock controller on BM1880 has supplies clocks to all peripherals in the form of gate clocks and composite clocks (fixed factor + gate). Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lkml.kernel.org/r/20191115162901.17456-7-manivannan.sadhasivam@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-22clk: Add clk_hw_unregister_composite helper function definitionManivannan Sadhasivam1-0/+11
This function has been delcared but not defined anywhere. Hence, this commit adds definition for it. Fixes: 49cb392d3639 ("clk: composite: Add hw based registration APIs") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lkml.kernel.org/r/20191115162901.17456-3-manivannan.sadhasivam@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-22clk: Zero init clk_init_data in helpersManivannan Sadhasivam5-5/+5
The clk_init_data struct needs to be initialized to zero for the new parent_map implementation to work correctly. Otherwise, the member which is available first will get processed. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lkml.kernel.org/r/20191115162901.17456-2-manivannan.sadhasivam@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-22clk: ingenic: Allow drivers to be built with COMPILE_TESTStephen Boyd1-1/+1
We don't need the MIPS architecture or even a MIPS compiler to compile test these drivers. Let's add a COMPILE_TEST possibility on the menuconfig here so that we can build these drivers on more configurations. Cc: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20191114001925.159276-1-sboyd@kernel.org Reviewed-by: Paul Cercueil <paul@crapouillou.net>
2019-11-19clk: mark clk_disable_unused() as __initRasmus Villemoes1-4/+4
clk_disable_unused is only called once, as a late_initcall, so reclaim a bit of memory by marking it (and the functions and data it is the sole user of) as __init/__initdata. This moves ~1900 bytes from .text to .init.text for a imx_v6_v7_defconfig. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lkml.kernel.org/r/20191004094826.8320-1-linux@rasmusvillemoes.dk Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-19clk: Fix memory leak in clk_unregister()Kishon Vijay Abraham I1-0/+1
Memory allocated in alloc_clk() for 'struct clk' and 'const char *con_id' while invoking clk_register() is never freed in clk_unregister(), resulting in kmemleak showing the following backtrace. backtrace: [<00000000546f5dd0>] kmem_cache_alloc+0x18c/0x270 [<0000000073a32862>] alloc_clk+0x30/0x70 [<0000000082942480>] __clk_register+0xc8/0x760 [<000000005c859fca>] devm_clk_register+0x54/0xb0 [<00000000868834a8>] 0xffff800008c60950 [<00000000d5a80534>] platform_drv_probe+0x50/0xa0 [<000000001b3889fc>] really_probe+0x108/0x348 [<00000000953fa60a>] driver_probe_device+0x58/0x100 [<0000000008acc17c>] device_driver_attach+0x6c/0x90 [<0000000022813df3>] __driver_attach+0x84/0xc8 [<00000000448d5443>] bus_for_each_dev+0x74/0xc8 [<00000000294aa93f>] driver_attach+0x20/0x28 [<00000000e5e52626>] bus_add_driver+0x148/0x1f0 [<000000001de21efc>] driver_register+0x60/0x110 [<00000000af07c068>] __platform_driver_register+0x40/0x48 [<0000000060fa80ee>] 0xffff800008c66020 Fix it here. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lkml.kernel.org/r/20191022071153.21118-1-kishon@ti.com Fixes: 1df4046a93e0 ("clk: Combine __clk_get() and __clk_create_clk()") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-13clk: Ingenic: Add CGU driver for X1000.Zhou Yanjie3-0/+285
Add support for the clocks provided by the CGU in the Ingenic X1000 SoC, making use of the cgu code to do the heavy lifting. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> Link: https://lkml.kernel.org/r/1573378102-72380-3-git-send-email-zhouyanjie@zoho.com Reviewed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-13clk: tegra: Use match_string() helper to simplify the codeYueHaibing1-8/+4
match_string() returns the array index of a matching string. Use it instead of the open-coded implementation. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lkml.kernel.org/r/20191109034226.21044-1-yuehaibing@huawei.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-13clk: pxa: fix one of the pxa RTC clocksRobert Jarzmik1-0/+1
The pxa27x platforms have a single IP with 2 drivers, sa1100-rtc and rtc-pxa drivers. A previous patch fixed the sa1100-rtc case, but the pxa-rtc wasn't fixed. This patch completes the previous one. Fixes: 8b6d10345e16 ("clk: pxa: add missing pxa27x clocks for Irda and sa1100-rtc") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Link: https://lkml.kernel.org/r/20191026194420.11918-1-robert.jarzmik@free.fr Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-13clk: sprd: Use IS_ERR() to validate the return value of syscon_regmap_lookup_by_phandle()Baolin Wang1-1/+1
The syscon_regmap_lookup_by_phandle() will never return NULL, thus use IS_ERR() to validate the return value instead of IS_ERR_OR_NULL(). Fixes: d41f59fd92f2 ("clk: sprd: Add common infrastructure") Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lkml.kernel.org/r/1995139bee5248ff3e9d46dc715968f212cfc4cc.1570520268.git.baolin.wang@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-13clk: armada-xp: remove unused codeYueHaibing1-26/+0
drivers/clk/mvebu/armada-xp.c:171:38: warning: mv98dx3236_coreclks defined but not used [-Wunused-const-variable=] drivers/clk/mvebu/armada-xp.c:213:41: warning: mv98dx3236_gating_desc defined but not used [-Wunused-const-variable=] They are not used since commit 337072604224 ("clk: mvebu: Expand mv98dx3236-core-clock support"). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lkml.kernel.org/r/20191111140420.36092-1-yuehaibing@huawei.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-11clk: tegra: Fix build error without CONFIG_PM_SLEEPYueHaibing1-0/+2
If CONFIG_PM_SLEEP is n, build fails: drivers/clk/tegra/clk-tegra210.c:3426:13: error: tegra210_clk_suspend undeclared here (not in a function); did you mean tegra_clk_ndspeed? .suspend = tegra210_clk_suspend, ^~~~~~~~~~~~~~~~~~~~ tegra_clk_ndspeed drivers/clk/tegra/clk-tegra210.c:3427:12: error: tegra210_clk_resume undeclared here (not in a function); did you mean tegra210_clk_suspend? .resume = tegra210_clk_resume, Use ifdef to guard this. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 27d10d548c04 ("clk: tegra: Add suspend and resume support on Tegra210") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Optimize PLLX restore on Tegra20/30Dmitry Osipenko2-16/+30
There is no need to re-configure PLLX if its configuration in unchanged on return from suspend / cpuidle, this saves 300us if PLLX is already enabled (common case for cpuidle). Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.