aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/clk
AgeCommit message (Collapse)AuthorFilesLines
2016-03-27clk: rockchip: Add support for multiple clock providersXing Zheng8-118/+229
There are need to support Multi-CRUs probability in future, but it is not supported on the current Rockchip Clock Framework. Therefore, this patch add support a provider as the parameter handler when we call the clock register functions for per CRU. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-27clk: rockchip: allow varying mux parameters for cpuclk pll-sourcesXing Zheng7-11/+45
Thers are only two parent PLLs that APLL and GPLL for core on the previous SoCs (RK3066/RK3188/RK3288/RK3368). Hence, we set fixed GPLL as alternate parent when core is switching freq. Since RK3399 big.LITTLE architecture, we need to select and adapt more PLLs (ALPLL/ABPLL/DPLL/GPLL) sources. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-27clk: rockchip: add a COMPOSITE_FRACMUX_NOGATE typeXing Zheng1-0/+16
Because there are some frac clock mux nodes don't have a gate node on the RK3399. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-23Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds163-2357/+5232
Pull clk updates from Stephen Boyd: "The clk changes for this release cycle are mostly dominated by new device support in terms of LoC, but there has been some cleanup in the core as well as the usual minor clk additions to various drivers. Core: - parent tracking has been simplified - CLK_IS_ROOT is now a no-op flag, cleaning up drivers has started - of_clk_init() doesn't consider disabled DT nodes anymore - clk_unregister() had an error path bug squashed - of_clk_get_parent_count() has been fixed to only return unsigned ints - HAVE_MACH_CLKDEV is removed now that the last arch user (ARM) is gone New Drivers: - NXP LPC18xx creg - QCOM IPQ4019 GCC - TI dm814x ADPLL - i.MX6QP Updates: - Cyngus audio clks found on Broadcom iProc devices - Non-critical fixes for BCM2385 PLLs - Samsung exynos5433 updates for clk id errors, HDMI support, suspend/resume simplifications - USB, CAN, LVDS, and FCP clks on shmobile devices - sunxi got support for more clks on new SoCs and went through a minor refactoring/rewrite to use a simpler factor clk construct - rockchip added some more clk ids and added suport for fraction dividers - QCOM GDSCs in msm8996 - A new devm helper to make adding custom actions simpler (acked by Greg)" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (197 commits) clk: bcm2835: fix check of error code returned by devm_ioremap_resource() clk: renesas: div6: use RENESAS for #define clk: renesas: Rename header file renesas.h clk: max77{686,802}: Remove CLK_IS_ROOT clk: versatile: Remove CLK_IS_ROOT clk: sunxi: Remove use of variable length array clk: fixed-rate: Remove CLK_IS_ROOT clk: qcom: Remove CLK_IS_ROOT doc: dt: add documentation for lpc1850-creg-clk driver clk: add lpc18xx creg clk driver clk: lpc32xx: fix compilation warning clk: xgene: Add missing parenthesis when clearing divider value clk: mb86s7x: Remove CLK_IS_ROOT clk: x86: Remove clkdev.h and clk.h includes clk: x86: Remove CLK_IS_ROOT clk: mvebu: Remove CLK_IS_ROOT clk: renesas: move drivers to renesas directory clk: si5{14,351,70}: Remove CLK_IS_ROOT clk: scpi: Remove CLK_IS_ROOT clk: s2mps11: Remove CLK_IS_ROOT ...
2016-03-20Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds15-1243/+647
Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, these contain various things that touch the drivers/ directory but got merged through arm-soc for practical reasons: - Rockchip rk3368 gains power domain support - Small updates for the ARM spmi driver - The Atmel PMC driver saw a larger rework, touching both arch/arm/mach-at91 and drivers/clk/at91 - All reset controller driver changes alway get merged through arm-soc, though this time the largest change is the addition of a MIPS pistachio reset driver - One bugfix for the NXP (formerly Freescale) i.MX weim bus driver" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits) bus: imx-weim: Take the 'status' property value into account clk: at91: remove useless includes clk: at91: pmc: remove useless capacities handling clk: at91: pmc: drop at91_pmc_base usb: gadget: atmel: access the PMC using regmap ARM: at91: remove useless includes and function prototypes ARM: at91: pm: move idle functions to pm.c ARM: at91: pm: find and remap the pmc ARM: at91: pm: simply call at91_pm_init clk: at91: pmc: move pmc structures to C file clk: at91: pmc: merge at91_pmc_init in atmel_pmc_probe clk: at91: remove IRQ handling and use polling clk: at91: make use of syscon/regmap internally clk: at91: make use of syscon to share PMC registers in several drivers hwmon: (scpi) add energy meter support firmware: arm_scpi: add support for 64-bit sensor values firmware: arm_scpi: decrease Tx timeout to 20ms firmware: arm_scpi: fix send_message and sensor_get_value for big-endian reset: sti: Make reset_control_ops const reset: zynq: Make reset_control_ops const ...
2016-03-20Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds31-183/+148
Pull ARM SoC 64-bit changes from Arnd Bergmann: "Here's our branch of ARM64 contents for this merge window, now containing all ARM64 changes other than device tree files. - Various new platforms get added: * Allwinner A64 SoC * Annapurna Labs Alpine SoCs * Broadcom Vulcan * Marvell Armada 3700 SoCs * Amlogic S905 - Various defconfig changes to enable platform specific drivers This branch includes the clk git tree to resolve a build-time dependency" * tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) arm64: defconfig: Increase MMC_BLOCK_MINORS to 16 arm64: defconfig: Add Qualcomm sdhci and restart functionality ARM64: Enable Amlogic Meson GXBaby platform arm64: defconfig: Enable Samsung MFD and related configs arm64: alpine: select the Alpine MSI controller driver arm64: defconfig: enable the Alpine family arm64: add Alpine SoC family arm64: defconfig: Enable exynos thermal config arm64: add defconfig options for Allwinner SoCs arm64: defconfig: Enable DesignWare APB GPIO controller arm64: defconfig: Add Renesas R-Car Gen3 USB 2.0 phy driver support arm64: EXYNOS: Consolidate ARCH_EXYNOS7 symbol into ARCH_EXYNOS clk: samsung: Don't build ARMv8 clock drivers on ARMv7 MAINTAINERS: Add entry for Broadcom Vulcan SoC arm64: cputype info for Broadcom Vulcan arm64: Broadcom Vulcan support arm64: defconfig: Add Broadcom Vulcan to defconfig arm64: update ARCH_MVEBU for Marvell Armada 7K/8K support Documentation: arm: add Marvell Armada 7K and 8K families Documentation: arm: add link to Armada 38x Functional Spec ...
2016-03-20Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds3-25/+24
Pull ARM SoC platform updates from Arnd Bergmann: "Newly added support for additional SoCs: - Axis Artpec-6 SoC family - Allwinner A83T SoC - Mediatek MT7623 - NXP i.MX6QP SoC - ST Microelectronics stm32f469 microcontroller New features: - SMP support for Mediatek mt2701 - Big-endian support for NXP i.MX - DaVinci now uses the new DMA engine dma_slave_map - OMAP now uses the new DMA engine dma_slave_map - earlyprintk support for palmchip uart on mach-tango - delay timer support for orion Other: - Exynos PMU driver moved out to drivers/soc/ - Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP, uniphier" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: uniphier: rework SMP code to support new System Bus binding ARM: uniphier: add missing of_node_put() ARM: at91: avoid defining CONFIG_* symbols in source code ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1 ARM: imx: Make reset_control_ops const ARM: imx: Do L2 errata only if the L2 cache isn't enabled ARM: imx: select ARM_CPU_SUSPEND only for imx6 dmaengine: pxa_dma: fix the maximum requestor line ARM: alpine: select the Alpine MSI controller driver ARM: pxa: add the number of DMA requestor lines dmaengine: mmp-pdma: add number of requestors dma: mmp_pdma: Add the #dma-requests DT property documentation ARM: OMAP2+: Add rtc hwmod configuration for ti81xx ARM: s3c24xx: Avoid warning for inb/outb ARM: zynq: Move early printk virtual address to vmalloc area ARM: DRA7: hwmod: Add custom reset handler for PCIeSS ARM: SAMSUNG: Remove unused register offset definition ARM: EXYNOS: Cleanup header files inclusion drivers: soc: samsung: Enable COMPILE_TEST MAINTAINERS: Add maintainers entry for drivers/soc/samsung ...
2016-03-19Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds1-6/+25
Pull ARM updates from Russell King: "Another mixture of changes this time around: - Split XIP linker file from main linker file to make it more maintainable, and various XIP fixes, and clean up a resulting macro. - Decompressor cleanups from Masahiro Yamada - Avoid printing an error for a missing L2 cache - Remove some duplicated symbols in System.map, and move vectors/stubs back into kernel VMA - Various low priority fixes from Arnd - Updates to allow bus match functions to return negative errno values, touching some drivers and the driver core. Greg has acked these changes. - Virtualisation platform udpates form Jean-Philippe Brucker. - Security enhancements from Kees Cook - Rework some Kconfig dependencies and move PSCI idle management code out of arch/arm into drivers/firmware/psci.c - ARM DMA mapping updates, touching media, acked by Mauro. - Fix places in ARM code which should be using virt_to_idmap() so that Keystone2 can work. - Fix Marvell Tauros2 to work again with non-DT boots. - Provide a delay timer for ARM Orion platforms" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (45 commits) ARM: 8546/1: dma-mapping: refactor to fix coherent+cma+gfp=0 ARM: 8547/1: dma-mapping: store buffer information ARM: 8543/1: decompressor: rename suffix_y to compress-y ARM: 8542/1: decompressor: merge piggy.*.S and simplify Makefile ARM: 8541/1: decompressor: drop redundant FORCE in Makefile ARM: 8540/1: decompressor: use clean-files instead of extra-y to clean files ARM: 8539/1: decompressor: drop more unneeded assignments to "targets" ARM: 8538/1: decompressor: drop unneeded assignments to "targets" ARM: 8532/1: uncompress: mark putc as inline ARM: 8531/1: turn init_new_context into an inline function ARM: 8530/1: remove VIRT_TO_BUS ARM: 8537/1: drop unused DEBUG_RODATA from XIP_KERNEL ARM: 8536/1: mm: hide __start_rodata_section_aligned for non-debug builds ARM: 8535/1: mm: DEBUG_RODATA makes no sense with XIP_KERNEL ARM: 8534/1: virt: fix hyp-stub build for pre-ARMv7 CPUs ARM: make the physical-relative calculation more obvious ARM: 8512/1: proc-v7.S: Adjust stack address when XIP_KERNEL ARM: 8411/1: Add default SPARSEMEM settings ARM: 8503/1: clk_register_clkdev: remove format string interface ARM: 8529/1: remove 'i' and 'zi' targets ...
2016-03-17clk: bcm2835: add missing osc and per clocksMartin Sperl1-0/+90
Add AVE0, DFT, GP0, GP1, GP2, SLIM, SMI, TEC, DPI, CAM0, CAM1, DSI0E, and DSI1E. PULSE is not added because it has an extra divider. Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net>
2016-03-17clk: bcm2835: add missing PLL clock dividersMartin Sperl1-0/+32
Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net>
2016-03-17clk: bcm2835: enable management of PCM clockMartin Sperl1-0/+7
Enable the PCM clock in the SOC, which is used by the bcm2835-i2s driver. Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net>
2016-03-17clk: bcm2835: reorganize bcm2835_clock_array assignmentMartin Sperl1-459/+393
Reorganize bcm2835_clock_array so that there is no more need for separate bcm2835_*_data structures to be defined. Instead the required structures are generated inline via helper macros. To allow this to also work for pll alone it was required that the parent_pll was changed from a pointer to bcm2835_pll_data to the name of the pll instead. Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net>
2016-03-17clk: bcm2835: remove use of BCM2835_CLOCK_COUNT in driverMartin Sperl1-73/+94
As the use of BCM2835_CLOCK_COUNT in include/dt-bindings/clock/bcm2835.h is frowned upon as it needs to get modified every time a new clock gets introduced this patch changes the clk-bcm2835 driver to use a different scheme for registration of clocks and pll, so that there is no more need for BCM2835_CLOCK_COUNT to be defined. Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net>
2016-03-17clk: bcm2835: expose raw clock-registers via debugfsMartin Sperl1-0/+101
For debugging purposes under some circumstance it helps to be able to see the actual clock registers. E.g: when looking at the clock divider it is helpful to see what the actual clock divider is. This patch exposes all the clock registers specific to each clock/pll/pll-divider via debugfs. Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Eric Anholt <eric@anholt.net>
2016-03-17clk: bcm2835: clean up coding style issuesMartin Sperl1-6/+2
Fix all the checkpatch complaints for clk-bcm2835.c Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2016-03-17clk: bcm2835: correctly enable fractional clock supportMartin Sperl1-6/+39
The current driver calculates the clock divider with fractional support enabled. But it does not enable fractional support in the control register itself resulting in an integer only divider, but in clk_set_rate responds back the fractionally divided clock frequency. This patch enables fractional support in the control register whenever there is a fractional bit set in the requested clock divider. Mash clock limits are are also handled for the PWM clock applying the correct divider limits (2 and max_int) applicable to basic fractional divider support (mash order of 1). It also adds locking to protect the read/modify/write cycle of the register modification. Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net>
2016-03-17clk: bcm2835: divider value has to be 1 or moreMartin Sperl1-2/+3
Current clamping of a normal divider allows a value < 1 to be valid. A divider of < 1 would actually only be possible if we had a PLL... So this patch clamps the divider to 1. Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net>
2016-03-17clk: bcm2835: add locking to pll*_on/off methodsMartin Sperl1-0/+4
Add missing locking to: * bcm2835_pll_divider_on * bcm2835_pll_divider_off to protect the read modify write cycle for the register access protecting both cm_reg and a2w_reg registers. Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net>
2016-03-17clk: bcm2835: pll_off should only update CM_PLL_ANARSTMartin Sperl1-2/+8
bcm2835_pll_off is currently assigning CM_PLL_ANARST to the control register, which may lose the other bits that are currently set by the clock dividers. It also now locks during the read/modify/write cycle of both registers. Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net>
2016-03-16clk: rockchip: associate SCLK_MAC_PLL and disable reparenting on rk3036Heiko Stuebner1-1/+1
The emac needs constant and very specific rate but the possible PLL-sources are very limited, so we expect the PLL source to be set manually on per board and don't want it to get changed in an automatic way later. So add the necessary clock-id and disable reparenting on set_rate calls. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-16clk: rockchip: associate the rk3036 HCLK_EMAC clock-idXing Zheng1-1/+1
Associate the new clock id the clock. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Xing Zheng <zhengxing@rock-chips.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-15clk: bcm2835: fix check of error code returned by devm_ioremap_resource()Vladimir Zapolskiy1-2/+2
The change fixes potential oops while accessing iomem on invalid address, if devm_ioremap_resource() fails due to some reason. The devm_ioremap_resource() function returns ERR_PTR() and never returns NULL, which makes useless a following check for NULL. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Fixes: 5e63dcc74b30 ("clk: bcm2835: Add a driver for the auxiliary peripheral clock gates") Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-15clk: renesas: div6: use RENESAS for #defineSimon Horman1-2/+2
Name the #define guarding compilation of this header __RENESAS_CLK_DIV6_H__ rather than __SHMOBILE_CLK_DIV6_H__. This is a follow-up to renaming the directory in which this file lives from shmobile to renesas which is in turn part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-15clk: renesas: Rename header file renesas.hSimon Horman8-8/+8
This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Along with the above mentioned Kconfig changes it seems appropriate to also rename files. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-15clk: max77{686,802}: Remove CLK_IS_ROOTStephen Boyd2-5/+0
This flag is a no-op now. Remove usage of the flag. Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-15clk: versatile: Remove CLK_IS_ROOTStephen Boyd4-9/+6
This flag is a no-op now. Remove usage of the flag. Cc: Pawel Moll <pawel.moll@arm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-15clk: sunxi: Remove use of variable length arrayStephen Boyd1-2/+9
Using an array allocated on the stack may lead to stack overflows and other problems so let's move the allocation to the heap instead. This silences the following checker warning as well. drivers/clk/sunxi/clk-sun8i-mbus.c:36:29: warning: Variable length array is used Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-04clk: fixed-rate: Remove CLK_IS_ROOTStephen Boyd1-2/+1
This flag is a no-op now. Remove usage of the flag. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-04clk: qcom: Remove CLK_IS_ROOTStephen Boyd7-152/+2
This flag is a no-op now. Remove usage of the flag. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-04clk: add lpc18xx creg clk driverJoachim Eastwood2-0/+227
The CREG block on lpc18xx contains configuration register for two low power clocks. Support enabling of these two clocks with a clk driver that access CREG trough the syscon regmap interface. These clocks are needed to support peripherals like the internal RTC on lpc18xx. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-04Merge tag 'v4.6-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-nextStephen Boyd6-61/+83
Pull second batch of rockchip clk updates from Heiko Stuebner: Inclusion of the rk3368 fractional dividers into our handling scheme, fixes for missing error-handling in mmc-phase, inverters and cpu-clocks and some more clock-ids. * tag 'v4.6-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: include downstream muxes into fractional dividers on rk3368 clk: rockchip: set the clock ids for RK3228 HDMI clk: rockchip: set the clock ids for RK3228 VOP clk: rockchip: add the tsadc clocks found on rk3228 SoCs clk: rockchip: add the new clock ids for RK3228 HDMI clk: rockchip: add the new clock ids for RK3228 VOP clk: rockchip: add id of the tsadc clock found on rk3228 SoCs clk: rockchip: fix coding style for clk-cpu.c clk: rockchip: don't return NULL when registering mmc branch fails clk: rockchip: don't return NULL when registering inverter fails clk: rockchip: check grf when waiting pll lock clk: rockchip: disable alt_parent clk in err cases when registering cpuclk
2016-03-03clk: lpc32xx: fix compilation warningSylvain Lemieux1-1/+4
Remove the following false positives compilation warning: - drivers/clk/nxp/clk-lpc32xx.c: In function 'lpc32xx_clk_register': warning: 'hw' may be used uninitialized in this function [-Wmaybe-uninitialized] - drivers/clk/nxp/clk-lpc32xx.c: In function 'clk_hclk_pll_round_rate': warning: 'p' may be used uninitialized in this function [-Wmaybe-uninitialized] warning: 'n' may be used uninitialized in this function [-Wmaybe-uninitialized] warning: 'm' may be used uninitialized in this function [-Wmaybe-uninitialized] Tested using gcc version 4.7.3. Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com> [sboyd@codeaurora.org: Drop assignment of hw to NULL as return silences it and is less likely to lead to hiding problems later] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-03clk: xgene: Add missing parenthesis when clearing divider valueLoc Ho1-2/+2
In the initial fix for non-zero divider shift value, the parenthesis was missing after the negate operation. This patch adds the required parenthesis. Otherwise, lower bits may be cleared unintentionally. Signed-off-by: Loc Ho <lho@apm.com> Acked-by: Toan Le <toanle@apm.com> Fixes: 1382ea631ddd ("clk: xgene: Fix divider with non-zero shift value") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-03clk: mb86s7x: Remove CLK_IS_ROOTStephen Boyd1-2/+2
This flag is a no-op now. Remove usage of the flag. Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-03clk: x86: Remove clkdev.h and clk.h includesStephen Boyd1-2/+0
This driver is a clk provider and not a clk consumer, so remove the clk.h include. Also, drop clkdev.h because there's not clkdev usage here either. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-03clk: x86: Remove CLK_IS_ROOTStephen Boyd1-1/+1
This flag is a no-op now. Remove usage of the flag. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-03clk: mvebu: Remove CLK_IS_ROOTStephen Boyd2-8/+6
This flag is a no-op now. Remove usage of the flag. Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-03clk: renesas: move drivers to renesas directorySimon Horman16-1/+1
This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Along with the above mentioned Kconfig changes it seems appropriate to also rename directories that only hold drivers for such SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-03Merge branch 'clk-shmobile-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-nextStephen Boyd2-2/+21
Pull shmobile clk updates from Geert Uytterhoeven: - Fix a bug in the div6 clock driver that was exposed by CAN support on R-Car H3, - Add more module clocks for R-Car H3. * 'clk-shmobile-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: shmobile: r8a7795: Add CAN FD peripheral clock clk: shmobile: r8a7795: Add CANFD clock clk: shmobile: r8a7795: Add CAN peripheral clock clk: shmobile: div6: Fix .recalc_rate() using a stale divisor clk: shmobile: r8a7795: Add LVDS module clock clk: shmobile: r8a7795: Add FCP clocks
2016-03-02clk: si5{14,351,70}: Remove CLK_IS_ROOTStephen Boyd3-3/+3
This flag is a no-op now. Remove usage of the flag. Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Cc: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-02clk: scpi: Remove CLK_IS_ROOTStephen Boyd1-1/+1
This flag is a no-op now. Remove usage of the flag. Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-02clk: s2mps11: Remove CLK_IS_ROOTStephen Boyd1-3/+0
This flag is a no-op now. Remove usage of the flag. Acked-by: Andi Shyti <andi.shyti@samsung.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-02clk: pwm: Remove CLK_IS_ROOTStephen Boyd1-1/+1
This flag is a no-op now. Remove usage of the flag. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-02clk: efm32gg: Remove CLK_IS_ROOTStephen Boyd1-1/+1
This flag is a no-op now. Remove usage of the flag. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-02clk: zynq: Remove CLK_IS_ROOTStephen Boyd1-2/+1
This flag is a no-op now. Remove usage of the flag. Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-02clk: ux500: Remove CLK_IS_ROOTStephen Boyd3-84/+75
This flag is a no-op now. Remove usage of the flag. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-02clk: ti: Remove CLK_IS_ROOTStephen Boyd1-2/+2
This flag is a no-op now. Remove usage of the flag. Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-02clk: tegra: Remove CLK_IS_ROOTStephen Boyd5-14/+8
This flag is a no-op now. Remove usage of the flag. Acked-by: Rhyland Klein <rklein@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-02clk: spear: Remove CLK_IS_ROOTStephen Boyd4-32/+19
This flag is a no-op now. Remove usage of the flag. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-02clk: samsung: Remove CLK_IS_ROOTStephen Boyd13-107/+95
This flag is a no-op now. Remove usage of the flag. Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>