aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/clk
AgeCommit message (Collapse)AuthorFilesLines
2014-04-30clk: Consolidate recalc rate logicStephen Boyd1-16/+11
The same if-else statement exists four times to recalculate the rate of a clock. Consolidate this logic into a single function to save some lines. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-30clk: Don't check for missing ops in clk_set_parent()Stephen Boyd1-3/+0
We dereference clk->ops during clock registration so this check for NULL ops can't possibly ever be true. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-30clk: bcm21664: use common clock frameworkAlex Elder3-1/+292
Define the set of CCUs and provided clocks sufficient to satisfy the needs of all the existing clock references for BCM21664. Replace the "fake" fixed-rate clocks used previously with "real" ones. Note that only the minimal set of these clocks and CCUs is defined here. More clock definitions will need to be added as required by the addition of additional drivers. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-30clk: bcm281xx: move compatible string definitionsAlex Elder1-12/+0
The Broadcom 281xx clock code uses a #define for the compatible string for it's clock control units (CCUs). Rather than defining those in the C source file, define them in the header file that's shared by both the code and the device tree source file (along with all the clock ids). Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-30clk: bcm281xx: add clock hysteresis supportAlex Elder3-0/+82
Add support for clock gate hysteresis control. For now, if it's defined for a clock, it's enabled. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-30clk: bcm281xx: add clock policy supportAlex Elder3-0/+318
Add support for CCU policy engine control, and also for setting the mask bits for bus clocks that require a policy change to get activated. This includes adding validity checking framework for CCUs, to validate the policy fields if defined. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-30clk: bcm281xx: define CCU clock data staticallyAlex Elder3-143/+133
Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-30clk: bcm281xx: initialize CCU structures staticallyAlex Elder4-119/+97
We know up front how many CCU's we'll support, so there's no need to allocate their data structures dynamically. Define a macro KONA_CCU_COMMON() to simplify the initialization of many of the fields in a ccu_data structure. Pass the address of a statically defined CCU structure to kona_dt_ccu_setup() rather than having that function allocate one. We also know at build time how many clocks a given CCU will provide, though the number of of them for each CCU is different. Record the number of clocks we need in the CCU's clk_onecell_data struct (which is used when we register the CCU with the common clock code as a clock provider). Rename that struct field "clk_data" (because "data" alone gets a little confusing). Use the known clock count to move the allocation of each CCU's clocks array into ccu_clks_setup() rather than having each CCU's setup callback function do it. (The real motivation behind all of this is that we'll be doing some static initialization of some additional CCU-specific data soon.) Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-30clk: bcm281xx: change some symbol namesAlex Elder1-11/+16
As I developed the bcm281xx clock code I understood there were restrictions on device tree "compatible" strings names, and as a result "bcm11351" was used in places despite the part family being more properly called "bcm281xx". This can be a little confusing. In some cases I went to far and things using "bcm11351" when that was not necessary. This patch remedies this. It renames the symbol used to define the "compatible" string (but not its value) so it uses "BCM281XX". Similarly, the name names provided to the CLK_OF_DECLARE() macro are changed, hoping to minimize the number of places that the confusing "11351" string is used. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-30clk: bcm281xx: use init_data.name for clock nameAlex Elder3-12/+14
Use the init_data.name field to hold the name of a Kona clock rather than duplicating it. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-30clk: bcm281xx: warn if ccu_wait_bit() failsAlex Elder1-0/+3
Don't let a failure of ccu_wait_bit() go unnoticed. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-30clk: divider: Optimize clk_divider_bestdiv loopMaxime COQUELIN1-1/+13
Currently, the for-loop used to try all the different dividers to find the one that best fit tries all the values from 1 to max_div, incrementing by one. In case of power-of-two, or table based divider, the loop isn't optimal. Instead of incrementing by one, this patch provides directly the next divider. Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-30clk: divider: Add round to closest dividerMaxime COQUELIN1-2/+67
In some cases, we want to be able to round the divider to the closest one, instead than rounding up. This patch adds a new CLK_DIVIDER_ROUND_CLOSEST flag to specify the divider has to round to closest div, keeping rounding up as de default behaviour. Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-30clk: Fix slab corruption in clk_unregister()Stephen Boyd1-1/+2
When a clock is unregsitered, we iterate over the list of children and reparent them to NULL (i.e. orphan list). While iterating the list, we should use the safe iterators because the children list for this clock is changing when we reparent the children to NULL. Failure to iterate safely can lead to slab corruption like this: ============================================================================= BUG kmalloc-128 (Not tainted): Poison overwritten ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: 0xed0c4900-0xed0c4903. First byte 0x0 instead of 0x6b INFO: Allocated in clk_register+0x20/0x1bc age=297 cpu=2 pid=70 __slab_alloc.isra.39.constprop.42+0x410/0x454 kmem_cache_alloc_trace+0x200/0x24c clk_register+0x20/0x1bc devm_clk_register+0x34/0x68 0xbf0000f0 platform_drv_probe+0x18/0x48 driver_probe_device+0x94/0x360 __driver_attach+0x94/0x98 bus_for_each_dev+0x54/0x88 bus_add_driver+0xe8/0x204 driver_register+0x78/0xf4 do_one_initcall+0xc4/0x17c load_module+0x19ac/0x2294 SyS_init_module+0xa4/0x110 ret_fast_syscall+0x0/0x48 INFO: Freed in clk_unregister+0xd4/0x140 age=23 cpu=2 pid=73 __slab_free+0x38/0x41c clk_unregister+0xd4/0x140 release_nodes+0x164/0x1d8 __device_release_driver+0x60/0xb0 driver_detach+0xb4/0xb8 bus_remove_driver+0x5c/0xc4 SyS_delete_module+0x148/0x1d8 ret_fast_syscall+0x0/0x48 INFO: Slab 0xeec50b90 objects=25 used=0 fp=0xed0c5400 flags=0x4080 INFO: Object 0xed0c48c0 @offset=2240 fp=0xed0c4a00 Bytes b4 ed0c48b0: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ Object ed0c48c0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ed0c48d0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ed0c48e0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ed0c48f0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ed0c4900: 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b ....kkkkkkkkkkkk Object ed0c4910: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ed0c4920: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ed0c4930: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk. Redzone ed0c4940: bb bb bb bb .... Padding ed0c49e8: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ Padding ed0c49f8: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ CPU: 3 PID: 75 Comm: mdev Tainted: G B 3.14.0-11033-g2054ba5ca781 #35 [<c0014be0>] (unwind_backtrace) from [<c0012240>] (show_stack+0x10/0x14) [<c0012240>] (show_stack) from [<c04b74a0>] (dump_stack+0x70/0xbc) [<c04b74a0>] (dump_stack) from [<c00f7a78>] (check_bytes_and_report+0xbc/0x100) [<c00f7a78>] (check_bytes_and_report) from [<c00f7c48>] (check_object+0x18c/0x218) [<c00f7c48>] (check_object) from [<c00f7efc>] (__free_slab+0x104/0x144) [<c00f7efc>] (__free_slab) from [<c04b6668>] (__slab_free+0x3dc/0x41c) [<c04b6668>] (__slab_free) from [<c014c008>] (load_elf_binary+0x88/0x12b4) [<c014c008>] (load_elf_binary) from [<c0105a44>] (search_binary_handler+0x78/0x18c) [<c0105a44>] (search_binary_handler) from [<c0106fc0>] (do_execve+0x490/0x5dc) [<c0106fc0>] (do_execve) from [<c0036b8c>] (____call_usermodehelper+0x134/0x168) [<c0036b8c>] (____call_usermodehelper) from [<c000f048>] (ret_from_fork+0x14/0x2c) FIX kmalloc-128: Restoring 0xed0c4900-0xed0c4903=0x6b Fixes: fcb0ee6a3d33 (clk: Implement clk_unregister) Cc: Jiada Wang <jiada_wang@mentor.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: stable@vger.kernel.org
2014-04-30clk: Fix double free due to devm_clk_register()Stephen Boyd1-41/+30
Now that clk_unregister() frees the struct clk we're unregistering we'll free memory twice: first we'll call kfree() in __clk_release() with an address kmalloc doesn't know about and second we'll call kfree() in the devres layer. Remove the allocation of struct clk in devm_clk_register() and let clk_release() handle it. This fixes slab errors like: ============================================================================= BUG kmalloc-128 (Not tainted): Invalid object pointer 0xed08e8d0 ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xeec503f8 objects=25 used=15 fp=0xed08ea00 flags=0x4081 CPU: 2 PID: 73 Comm: rmmod Tainted: G B 3.14.0-11032-g526e9c764381 #34 [<c0014be0>] (unwind_backtrace) from [<c0012240>] (show_stack+0x10/0x14) [<c0012240>] (show_stack) from [<c04b74dc>] (dump_stack+0x70/0xbc) [<c04b74dc>] (dump_stack) from [<c00f6778>] (slab_err+0x74/0x84) [<c00f6778>] (slab_err) from [<c04b6278>] (free_debug_processing+0x2cc/0x31c) [<c04b6278>] (free_debug_processing) from [<c04b6300>] (__slab_free+0x38/0x41c) [<c04b6300>] (__slab_free) from [<c03931bc>] (clk_unregister+0xd4/0x140) [<c03931bc>] (clk_unregister) from [<c02fb774>] (release_nodes+0x164/0x1d8) [<c02fb774>] (release_nodes) from [<c02f8698>] (__device_release_driver+0x60/0xb0) [<c02f8698>] (__device_release_driver) from [<c02f9080>] (driver_detach+0xb4/0xb8) [<c02f9080>] (driver_detach) from [<c02f8480>] (bus_remove_driver+0x5c/0xc4) [<c02f8480>] (bus_remove_driver) from [<c008c9b8>] (SyS_delete_module+0x148/0x1d8) [<c008c9b8>] (SyS_delete_module) from [<c000ef80>] (ret_fast_syscall+0x0/0x48) FIX kmalloc-128: Object at 0xed08e8d0 not freed Fixes: fcb0ee6a3d33 (clk: Implement clk_unregister) Cc: Jiada Wang <jiada_wang@mentor.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: stable@vger.kernel.org
2014-04-30Merge tag 'socfpga-clk-fix-for-3.15' of git://git.rocketboards.org/linux-socfpga-next into clk-fixes-socfpgaMike Turquette2-20/+10
clk: socfpga: clock fix for v3.15 Currently on 3.15-rc1, the SOCFPGA platform is unable to boot. This patch fixes the issue and allows the platform to boot.
2014-04-30clk: socfpga: fix clock driver for 3.15Dinh Nguyen2-20/+10
commit [1771b10d6 clk: respect the clock dependencies in of_clk_init] exposed a flaw in the socfpga clock driver and prevents the platform from booting on 3.15-rc1. Because the "altr,clk-mgr" is not really a clock, it should not be using CLK_OF_DECLARE, instead we should be mapping the clk-mgr's base address one of the functional clock init function. Use the socfpga_pll_init function to map the clk_mgr_base_addr as this clock should always be initialized first. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Tested-by: Pavel Machek <pavel@denx.de>
2014-04-30clk: divider: Fix best div calculation for power-of-two and table dividersMaxime COQUELIN1-1/+36
The divider returned by clk_divider_bestdiv() is likely to be invalid in case of power-of-two and table dividers when CLK_SET_RATE_PARENT flag isn't set. Fixes boot on STiH416 platform. Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: trivial merge conflict & updated changelog]
2014-04-30clk: bcm281xx: don't use unnamed structs or unionsAlex Elder3-61/+64
The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-26clk: mvebu: add Orion5x clock driverThomas Petazzoni3-0/+215
This commit adds a core clock driver for the Orion5x SoC, with support for the tclk, the CPU frequency and the DDR frequency. All the details about the Sample-At-Reset register were extracted from the U-Boot sources for Orion5x. Note that Orion5x does not have gatable clocks, so this core clock driver is sufficient to support clocking on Orion5x platforms. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: https://lkml.kernel.org/r/1398202002-28530-5-git-send-email-thomas.petazzoni@free-electrons.com Cc: Mike Turquette <mturquette@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-24Merge tag 'vexpress/fixes-for-3.15' of git://git.linaro.org/people/pawel.moll/linux into fixesArnd Bergmann1-1/+1
ARM Versatile Express fixes for 3.15 This series contains straight-forward fixes for different Versatile Express infrastructure drivers: - NULL pointer dereference on the error path in the clk driver - out of boundary array access in the dcscb driver - broken restart/power off implementation - mis-interpreted voltage unit in the spc driver * tag 'vexpress/fixes-for-3.15' of git://git.linaro.org/people/pawel.moll/linux: ARM: vexpress/TC2: Convert OPP voltage to uV before storing power/reset: vexpress: Fix restart/power off operation arm/mach-vexpress: array accessed out of bounds clk: vexpress: NULL dereference on error path Includes an update to 3.15-rc2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24clk: tegra: remove non-existent clocksStephen Warren1-3/+0
The Tegra124 clock driver currently provides 3 clocks that don't actually exist; 2 for NAND and one for UART5/UARTE. Delete these. Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24clk: vexpress: NULL dereference on error pathDan Carpenter1-1/+1
If the allocation fails then we dereference the NULL in the error path. Just return directly. Fixes: ed27ff1db869 ('clk: Versatile Express clock generators ("osc") driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2014-04-22clk: zynq: Leave debug clocks in bootup stateSoren Brinkmann1-0/+12
Make sure debug clocks stay enabled if the bootloader enabled them. Otherwise debug HW may crash due to bus-hangs caused by stopped clocks. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-04-17clk: tegra: Fix enabling of PLLEThierry Reding1-1/+1
When enabling the PLLE as its final step, clk_plle_enable() would accidentally OR in the value previously written to the PLLE_SS_CTRL register. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-17clk: tegra: Introduce divider mask and shift helpersThierry Reding1-20/+24
Add div{m,n,p}_shift() and div{m,n,p}_mask_shifted() helpers to make the code that modifies the m-, n- and p-divider fields of PLLs shorter and easier to read. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-17clk: tegra: Fix PLLE programmingThierry Reding1-6/+24
PLLE has M, N and P divider shift and width parameters that differ from the defaults. Furthermore, when clearing the M, N and P divider fields the corresponding masks were never shifted, thereby clearing only the lowest bits of the register. This lead to a situation where the PLLE programming would only work if the register hadn't been touched before. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2014-04-15clk: samsung: add clock controller driver for s3c2412Heiko Stuebner2-0/+270
This driver can handle the clock controller in the s3c2412 soc. The clock structure is built according to the manuals of the included SoCs and might include changes in comparison to the previous clock structure. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-04-15clk: samsung: add plls used by the early s3c24xx cpusHeiko Stuebner2-0/+185
The manuals do not give them explicit names like in later socs, so more generic names with a s3c2410-prefix were used for them. As it was common to do so in the previous implementation, functionality to change the pll rate is already included. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-04-15clk: samsung: add clock-driver for s3c2416, s3c2443 and s3c2450Heiko Stuebner2-0/+463
The three SoCs share a common clock tree which only differs in the existence of some special clocks. As with all parts common to these three SoCs the driver is named after the s3c2443, as it was the first SoC introducing this structure and there exists no other label to describe this s3c24xx epoch. The clock structure is built according to the manuals of the included SoCs and might include changes in comparison to the previous clock structure. As an example the sclk_uart gate was never handled previously and the div_uart was made to be the clock used by the serial driver. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-04-15clk: samsung: add plls used by the s3c2443Heiko Stuebner2-0/+74
The s3c2443 uses different plls that are not present yet. Therefore add the two needed types. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-04-15clk: samsung: add pll_6552 variant for s3c2416Heiko Stuebner2-2/+11
According to the manual s3c2416 and s3c2450 use a pll 6552 and 6553 and while the pll_6553 matches exactly the one already implemented the pll_6552 differs to the one from the s3c64xx series. The change is solely in the bit locations of the mdiv and pdiv values. All calculations are the same for both implementatons and even the proposed divider-values for specific frequencies in the manuals are the same. Therefore implement a variant that simply uses the changed bit locations if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-04-07Merge tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds1-4/+0
Pull MFD updates from Lee Jones: "Changes to existing drivers: - Use of managed resources - omap, twl4030, ti_am335x_tscadc - Advanced error handling - omap - Rework clk management - omap - Device Tree (re-)work - tc3589x, pm8921, da9055, sec - IRC management overhaul and !BROKEN - pm8921 - Convert to regmap - ssbi, pm8921 - Use simple power-management ops - ucb1x00 - Include file clean-up - adp5520, cs5535, janz, lpc_ich, - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583, rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc, tps65912, vexpress-config, wm8350, ywm8350 - Various bug fixes across the subsystem - NULL/invalid pointer dereference prevention - Resource leak mitigation, - Variable used initialised - Staticise various containers - Enforce return value checks New drivers/supported devices: - Add support for s2mps14 and s2mpa01 to sec - Add support for da9063 (v5) to da9063 - Add support for atom-c2000 to gpio-ich - Add support for come-{mbt10,cbt6,chl6} to kempld - Add support for da9053 to da9052 - Add support for itco-wdt (v3) and baytrail to lpc_ich - Add new drivers for tps65218, rtsx_usb, bcm590xx (Re-)moved drivers: - twl4030 ==> drivers/iio - ti-ssp ==> /dev/null" * tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (103 commits) mfd: wm5110: Correct default for HEADPHONE_DETECT_1 mfd: arizona: Correct small errors in the DT binding documentation mfd: arizona: Mark DSP clocking register as volatile mfd: devicetree: bindings: Add pm8xxx RTC description mfd: kempld-core: Fix potential hang-up during boot mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01 mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices fail mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail mfd: sec-core: Fix I2C dummy device resource leak on probe failure mfd: sec-core: Add of_compatible strings for clock MFD cells mfd: Remove obsolete ti-ssp driver Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks mfd: bcm590xx: Fix type argument for module device table mfd: lpc_ich: Add support for Intel Bay Trail SoC mfd: lpc_ich: Add support for NM10 GPIO mfd: lpc_ich: Change Avoton to iTCO v3 watchdog: iTCO_wdt: Add support for v3 silicon mfd: lpc_ich: Add support for iTCO v3 mfd: lpc_ich: Remove lpc_ich_cfg struct use mfd: lpc_ich: Only configure watchdog or GPIO when present ...
2014-04-05Merge tag 'clk-for-linus-3.15' of git://git.linaro.org/people/mike.turquette/linuxLinus Torvalds48-695/+5158
Pull clock framework changes from Mike Turquette: "The clock framework changes for 3.15 look similar to past pull requests. Mostly clock driver updates, more Device Tree support in the form of common functions useful across platforms and a handful of features and fixes to the framework core" * tag 'clk-for-linus-3.15' of git://git.linaro.org/people/mike.turquette/linux: (86 commits) clk: shmobile: fix setting paretn clock rate clk: shmobile: rcar-gen2: fix lb/sd0/sd1/sdh clock parent to pll1 clk: Fix minor errors in of_clk_init() function comments clk: reverse default clk provider initialization order in of_clk_init() clk: sirf: update copyright years to 2014 clk: mmp: try to use closer one when do round rate clk: mmp: fix the wrong calculation formula clk: mmp: fix wrong mask when calculate denominator clk: st: Adds quadfs clock binding clk: st: Adds clockgen-vcc and clockgen-mux clock binding clk: st: Adds clockgen clock binding clk: st: Adds divmux and prediv clock binding clk: st: Support for A9 MUX clocks clk: st: Support for ClockGenA9/DDR/GPU clk: st: Support for QUADFS inside ClockGenB/C/D/E/F clk: st: Support for VCC-mux and MUX clocks clk: st: Support for PLLs inside ClockGenA(s) clk: st: Support for DIVMUX and PreDiv Clocks clk: support hardware-specific debugfs entries clk: s2mps11: Use of_get_child_by_name ...
2014-04-05Merge tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds3-29/+66
Pull ARM SoC late cleanups from Arnd Bergmann: "These could not be part of the first cleanup branch, because they either came too late in the cycle, or they have dependencies on other branches. Important changes are: - The integrator platform is almost multiplatform capable after some reorganization (Linus Walleij) - Minor cleanups on Zynq (Michal Simek) - Lots of changes for Exynos and other Samsung platforms, including further preparations for multiplatform support and the clocks bindings are rearranged" * tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) devicetree: fix newly added exynos sata bindings ARM: EXYNOS: Fix compilation error in cpuidle.c ARM: S5P64X0: Explicitly include linux/serial_s3c.h in mach/pm-core.h ARM: EXYNOS: Remove hardware.h file ARM: SAMSUNG: Remove hardware.h inclusion ARM: S3C24XX: Remove invalid code from hardware.h dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock ARM: dts: Keep some essential LDOs enabled for arndale-octa board ARM: dts: Disable MDMA1 node for arndale-octa board ARM: S3C64XX: Fix build for implicit serial_s3c.h inclusion serial: s3c: Fix build of header without serial_core.h preinclusion ARM: EXYNOS: Allow wake-up using GIC interrupts ARM: EXYNOS: Stop using legacy Samsung PM code ARM: EXYNOS: Remove PM initcalls and useless indirection ARM: EXYNOS: Fix abuse of CONFIG_PM ARM: SAMSUNG: Move s3c_pm_check_* prototypes to plat/pm-common.h ARM: SAMSUNG: Move common save/restore helpers to separate file ARM: SAMSUNG: Move Samsung PM debug code into separate file ARM: SAMSUNG: Consolidate PM debug functions ARM: SAMSUNG: Use debug_ll_addr() to get UART base address ...
2014-04-05Merge tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds20-147/+3046
Pull ARM SoC driver changes from Arnd Bergmann: "These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable" * tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac." Revert "net: stmmac: Add SOCFPGA glue driver" ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks ARM: STi: Add reset controller support to mach-sti Kconfig drivers: reset: stih416: add softreset controller drivers: reset: stih415: add softreset controller drivers: reset: Reset controller driver for STiH416 drivers: reset: Reset controller driver for STiH415 drivers: reset: STi SoC system configuration reset controller support dts: socfpga: Add sysmgr node so the gmac can use to reference dts: socfpga: Add support for SD/MMC on the SOCFPGA platform reset: Add optional resets and stubs ARM: shmobile: r7s72100: fix bus clock calculation Power: Reset: Generalize qnap-poweroff to work on Synology devices. dts: socfpga: Update clock entry to support multiple parents ARM: socfpga: Update socfpga_defconfig dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. net: stmmac: Add SOCFPGA glue driver watchdog: orion_wdt: Use %pa to print 'phys_addr_t' drivers: cci: Export CCI PMU revision ...
2014-04-05Merge tag 'fixes-non-critical-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds3-3/+0
Pull ARM SoC non-critical bug fixes from Arnd Bergmann: "Lots of isolated bug fixes that were not found to be important enough to be submitted before the merge window or backported into stable kernels. The vast majority of these came out of Arnd's randconfig testing and just prevents running into build-time bugs in configurations that we do not care about in practice" * tag 'fixes-non-critical-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: at91: fix a typo ARM: moxart: fix CPU selection ARM: tegra: fix board DT pinmux setup ARM: nspire: Fix compiler warning IXP4xx: Fix DMA masks. Revert "ARM: ixp4xx: Make dma_set_coherent_mask common, correct implementation" IXP4xx: Fix Goramo Multilink GPIO conversion. Revert "ARM: ixp4xx: fix gpio rework" ARM: tegra: make debug_ll code build for ARMv6 ARM: sunxi: fix build for THUMB2_KERNEL ARM: exynos: add missing include of linux/module.h ARM: exynos: fix l2x0 saved regs handling ARM: samsung: select CRC32 for SAMSUNG_PM_CHECK ARM: samsung: select ATAGS where necessary ARM: samsung: fix SAMSUNG_PM_DEBUG Kconfig logic ARM: samsung: allow serial driver to be disabled ARM: s5pv210: enable IDE support in MACH_TORBRECK ARM: s5p64x0: fix building with only one soc type ARM: s3c64xx: select power domains only when used ARM: s3c64xx: MACH_SMDK6400 needs HSMMC1 ...
2014-04-02clk: shmobile: fix setting paretn clock rateBen Dooks1-1/+1
If the driver needs to change a clock rate, then it must be propogated through the MSTP clock to the parent clock (such as shdi0 -> sd0). Without this we cannot up-rate default clocks which are really slow (such as the mmcif1 which defaults to 12MHz where it could be running at 97MHz) Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-31clk: shmobile: rcar-gen2: fix lb/sd0/sd1/sdh clock parent to pll1Ben Dooks1-4/+4
The clock generator for rcar-gen2 has the lb, sdh, sd0 and sd1 clocks parented to pll1_div2 where the hardware diagram shows these to be directly fed from pll1. This fixes the initial rate for sdh0 clock to be 97.5MHz instead of the reported 48MHz where the manual says the default register values are for 97.5MHz. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-29Merge tag 'exynos-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup3Arnd Bergmann1-1/+1
Merge "Exynos cleanup for v3.15" from Kukjin Kim: - reorganize code for - add support reserve memory for mfc-v7 - consolidate exynos4 and exynos5 machine codes - add generic compatible strings for exynos4 and exynos5 - update DT with generic compatible strings - move clk related dt-binding header file in dt-bindings/clock * tag 'exynos-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock ARM: dts: Update Exynos DT files with generic compatible strings ARM: EXYNOS: Add generic compatible strings ARM: EXYNOS: Consolidate exynos4 and exynos5 machine files ARM: EXYNOS: Consolidate CPU init code ARM: SAMSUNG: Introduce generic Exynos4 and 5 helpers ARM: EXYNOS: Add support to reserve memory for MFC-v7 ARM: SAMSUNG: Reorganize calls to reserve memory for MFC Conflicts: arch/arm/mach-exynos/exynos.c Signed-off-by; Arnd Bergmann <arnd@arndb.de>
2014-03-29Merge branches 'samsung/cleanup', 'samsung/exynos-clk' and 'samsung/exynos-clk2' into next/cleanup3Arnd Bergmann7-90/+346
These are dependencies for the following Samsung branches Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-29Merge tag 'samsung-pm-1' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/driversArnd Bergmann7-90/+346
Merge "Samsung S2R PM updates for v3.15" from Kukjin Kim: From Tomasz Figa: This series reworks suspend/resume handling of Samsung clock drivers to cover more SoC specific aspects that are beyond simple register save and restore. The goal is to have all the suspend/resume code that touches the clock controller in single place, which is the clock driver. * tag 'samsung-pm-1' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Drop legacy Exynos4 clock suspend/resume code clk: samsung: exynos4: Add remaining suspend/resume handling clk: samsung: Drop old suspend/resume code clk: samsung: s3c64xx: Move suspend/resume handling to SoC driver clk: samsung: exynos5420: Move suspend/resume handling to SoC driver clk: samsung: exynos5250: Move suspend/resume handling to SoC driver clk: samsung: exynos4: Move suspend/resume handling to SoC driver clk: samsung: Provide common helpers for register save/restore clk: exynos4: Remove remnants of non-DT support Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-27clk: Fix minor errors in of_clk_init() function commentsSylwester Nawrocki1-2/+2
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-27clk: reverse default clk provider initialization order in of_clk_init()Sylwester Nawrocki1-1/+1
This restores the default clocks registration order as parsed from devicetree, i.e. as before commit 1771b10d605d26ccee771a7fb4b08718 "clk: respect the clock dependencies in of_clk_init", for when there is no explicit parent clock dependencies between clock providers specified in the device tree. It prevents regressions (boot failure, division by 0 errors) on imx and exynos platforms. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-26clk: sirf: update copyright years to 2014Barry Song3-3/+6
Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-26clk: mmp: try to use closer one when do round rateChao Xie1-3/+7
The orignal code will use the bigger rate between "previous rate" and "current rate" when caculate the rate. In fact, hardware cares about the closest one. So choose the closer rate between "previous rate" and "current rate". Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-26clk: mmp: fix the wrong calculation formulaChao Xie1-5/+5
The formula is numerator/denominator = Fin / (Fout * factor) So Fout = Fin * denominator / (numerator * factor). Current clk_factor_round_rate and clk_factor_recalc_rate use wrong formula. This patch will fix them. Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-26clk: mmp: fix wrong mask when calculate denominatorChao Xie1-1/+1
The code has typo when calculate denominator. It should use den_mask instead of num_mask. Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-27Merge tag 'zynq-cleanup-for-3.15-v2' of git://git.xilinx.com/linux-xlnx into next/cleanup2Arnd Bergmann1-26/+61
Merge "arm: Xilinx Zynq cleanup patches for v3.15" from Michal Simek: - Redesign SLCR initialization to enable driver developing which targets SLCR space * tag 'zynq-cleanup-for-3.15-v2' of git://git.xilinx.com/linux-xlnx: ARM: zynq: Add waituart implementation ARM: zynq: Move of_clk_init from clock driver ARM: zynq: Introduce zynq_slcr_unlock() ARM: zynq: Add and use zynq_slcr_read/write() helper functions ARM: zynq: Make zynq_slcr_base static ARM: zynq: Map I/O memory on clkc init ARM: zynq: Hang iomapped slcr address on device_node ARM: zynq: Split slcr in two parts ARM: zynq: Move clock_init from slcr to common arm: dt: zynq: Add fclk-enable property to clkc node [Arnd: remove SOC_BUS support from pull request] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-25clk: st: Support for A9 MUX clocksGabriel FERNANDEZ1-0/+19
The patch supports the A9-mux clocks used by ClockGenA9 A9-mux clock : Multiplexer inside ClockGenA9. A9 clock can be driven by either PLL or External clock (with an optional divide-by-2). This is implemented as 3-parent clock : PLL, Ext-clk OR Ext-clk/2 Signed-off-by: Pankaj Dev <pankaj.dev@st.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.