aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/clk
AgeCommit message (Collapse)AuthorFilesLines
2013-12-12clk: shmobile: Add R-Car Gen2 clocks supportLaurent Pinchart3-0/+304
The R-Car Gen2 SoCs (R8A7790 and R8A7791) have several clocks that are too custom to be supported in a generic driver. Those clocks can be divided in two categories: - Fixed rate clocks with multiplier and divisor set according to boot mode configuration - Custom divider clocks with SoC-specific divider values This driver supports both. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-12-12ARM: at91: remove AT91_PROGRAMMABLE_CLOCKS configuration optionNicolas Ferre3-6/+1
This AT91 specific Kconfig option removed the code that dealt with programmable clocks. Each AT91 SoC embeds programmable clocks and there is little gain to remove this code in case that such a clock is not used. If this option is not selected, it causes certain drivers to fail to build. We simply remove this option instead of adding code just to build a workaround. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-11clk: tegra: remove bogus PCIE_XCLKStephen Warren2-13/+0
The "pcie_xclk" clock is not actually a clock at all, but rather a reset domain. Now that the custom Tegra module reset API has been removed, we can remove the definition of any "clocks" that existed solely to support it. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-12-11clk: tegra: remove legacy reset APIsStephen Warren3-63/+0
Now that no code uses the custom Tegra module reset API, we can remove its implementation. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-12-11clk: tegra: implement a reset driverStephen Warren6-6/+57
The Tegra CAR module implements both a clock and reset controller. So far, the driver exposes the clock feature via the common clock API and the reset feature using a custom API. This patch adds an implementation of the common reset framework API (include/linux/reset*.h). The legacy reset implementation will be removed once all drivers have been converted. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-12-11clk: hi3620: add gate clock flagHaojian Zhuang1-59/+59
Add missing CLK_SET_RATE_PARENT flag for gate clock. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2013-12-11clk: hi3620: fix wrong flags on dividerHaojian Zhuang1-11/+11
The flags on dividers should be CLK_DIVIDER_HIWORD_MASK, not CLK_MUX_HIWORD_MASK. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2013-12-10clk: keystone: gate: fix error handling on initGrygorii Strashko1-4/+8
This patch fixes Keystone gate control clock driver initialization path: 1) clk_register_psc() returns error code and not a pure pointer, hence its return value need to be checked using IS_ERR(clk) macro. 2) Mapped IO memory isn't unmapped in case of errors, hence fix it. Cc: Mike Turquette <mturquette@linaro.org Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2013-12-10clk: keystone: use clkod register bits for postdivMurali Karicheri1-4/+20
DDR3A/B, ARM and PA PLL controllers have clkod register bits for configuring postdiv values. So use it instead of using fixed post dividers for these pll controllers. Assume that if fixed-postdiv attribute is not present, use clkod register value for pistdiv. Also update the Documentation of bindings to reflect the same. Cc: Mike Turquette <mturquette@linaro.org Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2013-12-04Merge branch 'clk/clk-unregister' of git://linuxtv.org/snawrocki/samsung into clk-next-unregisterMike Turquette3-13/+200
2013-12-04clk: exynos5420: fix cpll clock register offsetsChander Kashyap1-2/+2
Fixes cpll control and lock register offset values for Exynos5420 SoC. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-12-04clk: Implement clk_unregisterSylwester Nawrocki1-3/+118
clk_unregister() is currently not implemented and it is required when a clock provider module needs to be unloaded. Normally the clock supplier module is prevented to be unloaded by taking reference on the module in clk_get(). For cases when the clock supplier module deinitializes despite the consumers of its clocks holding a reference on the module, e.g. when the driver is unbound through "unbind" sysfs attribute, there are empty clock ops added. These ops are assigned temporarily to struct clk and used until all consumers release the clock, to avoid invoking callbacks from the module which just got removed. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-12-04clk: Add common __clk_get(), __clk_put() implementationsSylwester Nawrocki1-0/+26
This patch adds common __clk_get(), __clk_put() clkdev helpers that replace their platform specific counterparts when the common clock API is used. The owner module pointer field is added to struct clk so a reference to the clock supplier module can be taken by the clock consumers. The owner module is assigned while the clock is being registered, in functions _clk_register() and __clk_register(). Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-12-04clkdev: Fix race condition in clock lookup from device treeSylwester Nawrocki1-2/+10
There is currently a race condition in the device tree part of clk_get() function, since the pointer returned from of_clk_get_by_name() may become invalid before __clk_get() call. E.g. due to the clock provider driver remove() callback being called in between of_clk_get_by_name() and __clk_get(). Fix this by doing both the look up and __clk_get() operations with the clock providers list mutex held. This ensures that the clock pointer returned from __of_clk_get_from_provider() call and passed to __clk_get() is valid, as long as the clock supplier module first removes its clock provider instance and then does clk_unregister() on the corresponding clocks. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mike Turquette <mturquette@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-12-04clk: Provide not locked variant of of_clk_get_from_provider()Sylwester Nawrocki2-8/+46
Add helper functions for the of_clk_providers list locking and an unlocked variant of of_clk_get_from_provider(). These functions are intended to be used in the clkdev to avoid race condition in the device tree based clock look up in clk_get(). Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-12-04clk: hisilicon: add common clock supportHaojian Zhuang6-0/+652
Enable common clock driver of Hi3620 SoC. clkgate-seperated driver is used to support the clock gate that enable/disable/status registers are seperated. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2013-12-03Merge branch 'clk-tegra-next' of git://nv-tegra.nvidia.com/user/pdeschrijver/linux into clk-next-tegraMike Turquette16-3003/+4673
2013-12-02clk: at91: add PMC smd clockBoris BREZILLON4-0/+184
This patch adds at91 smd (Soft Modem) clock implementation using common clk framework. Not used by any driver right now. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC usb clockBoris BREZILLON4-0/+423
This patch adds new at91 usb clock implementation using common clk framework. This clock is used to clock usb ports (ohci, ehci and udc). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC utmi clockBoris BREZILLON4-0/+172
This adds new at91 utmi clock implementation using common clk framework. This clock is a pll with a fixed factor (x40). It is used as a source for usb clock. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC programmable clocksBoris BREZILLON4-0/+392
This patch adds new at91 programmable clocks implementation using common clk framework. A programmable clock is a clock which can be exported on a given pin to clock external devices. Each programmable clock is given an id (from 0 to 8). The number of available programmable clocks depends on the SoC you're using. Programmable clock driver only implements the clock setting (clock rate and parent setting). It must be chained to a system clock in order to enable/disable the generated clock. The PCKX pins used to output the clock signals must be assigned to the appropriate peripheral (see atmel's datasheets). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC peripheral clocksBoris BREZILLON4-1/+425
This patch adds new at91 peripheral clock implementation using common clk framework. Almost all peripherals provided by at91 SoCs need a clock to work properly. This clock is enabled/disabled using PCER/PCDR resgisters. Each peripheral is given an id (see atmel's datasheets) which is used to define and reference peripheral clocks. Some new SoCs (at91sam9x5 and sama5d3) provide a new register (PCR) where you can configure the peripheral clock as a division of the master clock. This will help reducing the peripherals power comsumption. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC system clocksBoris BREZILLON4-0/+144
This patch adds new at91 system clock implementation using common clk framework. Some peripherals need to enable a "system" clock in order to work properly. Each system clock is given an id based on the bit position in SCER/SCDR registers. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC master clockBoris BREZILLON5-9/+287
This patch adds new at91 master clock implementation using common clk framework. The master clock layout describe the MCKR register layout. There are 2 master clock layouts: - at91rm9200 - at91sam9x5 Master clocks are given characteristics: - min/max clock output rate These characteristics are checked during rate change to avoid over/underclocking. These characteristics are described in atmel's SoC datasheet in "Electrical Characteristics" paragraph. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC pll clocksBoris BREZILLON5-1/+705
This patch adds new at91 pll clock implementation using common clk framework. The pll clock layout describe the PLLX register layout. There are four pll clock layouts: - at91rm9200 - at91sam9g20 - at91sam9g45 - sama5d3 PLL clocks are given characteristics: - min/max clock source rate - ranges of valid clock output rates - values to set in out and icpll fields for each supported output range These characteristics are checked during rate change to avoid over/underclocking. These characteristics are described in atmel's SoC datasheet in "Electrical Characteristics" paragraph. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC main clockBoris BREZILLON4-0/+196
This patch adds new at91 main oscillator clock implementation using common clk framework. If rate is not provided during clock registration it is calculated using the slow clock (main clk parent in this case) rate and MCFR register. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC base supportBoris BREZILLON4-0/+371
This patch adds at91 PMC (Power Management Controller) base support. All at91 clocks managed by the PMC unit will use this framework. This framework provides the following fonctionalities: - define a new struct at91_pmc to hide PMC internals (lock, PMC memory mapping, irq domain, ...) - read/write helper functions (pmc_read/write) to access PMC registers - lock/unlock helper functions (pmc_lock/unlock) to lock/unlock access to pmc registers - a new irq domain and its associated irq chip to request PMC specific interrupts (useful for clk prepare callbacks) The PMC unit is declared as a dt clk provider (CLK_OF_DECLARE), and every clk using this framework will declare a table of of_at91_clk_init_cb_t and add it to the pmc_clk_ids table. When the pmc dt clock setup function is called (by of_clk_init function), it triggers the registration of every supported child clk (those matching the definitions in pmc_clk_ids). This patch copies at91_pmc_base (memory mapping) and at91sam9_idle (function) from arch/arm/mach-at91/clock.c (which is not compiled if COMMON_CLK_AT91 is enabled). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-01Merge tag 'sunxi-clk-for-3.13' of https://github.com/mripard/linux into clk-next-sunxi-rebaseMike Turquette3-14/+76
Allwinner sunXi SoCs clock changes Those are mostly random fixes, except for one patch to the composite clock that adds support for automatic reparenting. Conflicts: drivers/clk/sunxi/clk-sunxi.c
2013-11-28clk: tegra: fix __clk_lookup() return value checksWei Yongjun1-4/+4
In case of error, the function __clk_lookup() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-28clk: tegra: Do not print errors for clk_round_rate()Thierry Reding1-6/+3
clk_round_rate() can be used by drivers to determine whether or not a frequency is supported by the clock. The current Tegra clock driver outputs an error message and a stacktrace when the requested rate isn't supported. That's fine for clk_set_rate(), but it's confusing when all the driver does is query whether or not a frequency is supported. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-11-27clk: socfpga: Remove check for "reg" property in socfpga_clk_initDinh Nguyen1-3/+1
The function socfpga_clk_init() can support clocks that do not have a divider register, but a fixed-divider that can be read from DTS. Therefore, the "reg" property is not a failing condition for socfpga_clk_init(). Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-11-27clk: clean up everything on debugfs errorAlex Elder1-1/+2
[Maybe the third time will be the charm. -Alex] If CONFIG_COMMON_CLK_DEBUG is defined, clk_debug_create_one() is called to populate a debugfs directory with a few entries that are common for all clock types. If an error happens after creating the first one debugfs_remove() is called on the clock's directory. The problem with this is that no cleanup is done on the debugfs files already created in that directory, so the directory never actually gets removed. This problem is silently ignored. Fix this by calling debugfs_remove_recursive() instead. Reset the clk->dentry field to null afterward, to ensure it can't be mistaken as a valid pointer. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-11-26clk: tegra: Initialize DSI low-power clocksThierry Reding1-0/+2
The low-power DSI clocks are used during host-driven transactions on the DSI bus. Documentation recommends that they be children of PLLP and run at a frequency of at least 52 MHz. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-11-26clk: tegra: add FUSE clock deviceAlexandre Courbot4-1/+4
This clock is needed to ensure the FUSE registers can be accessed without freezing the system. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
2013-11-26clk: tegra: Properly setup PWM clock on Tegra30Thierry Reding1-1/+3
The clock for the PWM controller is slightly different from other peripheral clocks on Tegra30. The clock source mux field start at bit position 28 rather than 30. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-11-26clk: tegra: Initialize secondary gr3d clock on Tegra30Thierry Reding1-0/+1
There are two GPUs on Tegra30 and each of them uses a separate clock, so the secondary clock needs to be initialized in order for the gr3d module to work properly. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-11-26clk: tegra114: Initialize clocks needed for HDMIMikko Perttunen1-0/+2
Add disp1 and disp2 clocks to the clock initialization table. These clocks are required for display and HDMI support. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-11-26clk: tegra124: add suspend/resume function for tegra_cpu_car_opsJoseph Lo1-0/+27
Adding suspend/resume function for tegra_cpu_car_ops. We only save and restore the setting of the clock of CoreSight. Other clocks still need to be taken care by clock driver. Cc: Mike Turquette <mturquette@linaro.org> Signed-off-by: Joseph Lo <josephl@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2013-11-26clk: tegra124: add wait_for_reset and disable_clock for tegra_cpu_car_opsJoseph Lo1-0/+26
Hook the functions for CPU hotplug support. After the CPU is hot unplugged, the flow controller will handle to clock gate the CPU clock. But still need to implement an empty function to avoid warning message. Cc: Mike Turquette <mturquette@linaro.org> Signed-off-by: Joseph Lo <josephl@nvidia.com>
2013-11-26clk: tegra124: Add support for Tegra124 clocksPeter De Schrijver2-0/+1371
Implement clock support for Tegra124. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra124: Add new peripheral clocksPeter De Schrijver1-0/+69
Tegra124 introduces a number of new peripheral clocks. This patch adds those to the common peripheral clock code. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra124: Add common clk IDs to clk-id.hPeter De Schrijver1-0/+22
Tegra124 introduces a number of a new clocks. Introduce the corresponding the IDs for them. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: add TEGRA_PERIPH_NO_GATEPeter De Schrijver3-3/+22
Tegra124 has a clock which consists of a mux and a fractional divider. Add support for this. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-11-26clk: tegra: add locking to periph clksPeter De Schrijver2-19/+24
Tegra124 has periph clocks which share the hw register. Hence locking is required. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-11-26clk: tegra: Add periph regs bank XPeter De Schrijver1-0/+10
Tegra124 has an extra bank of peripheral clock registers. Add it to the generic peripheral clock code. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: Add support for PLLSSPeter De Schrijver2-2/+126
Tegra124 introduces a new PLL type, PLLSS. Add support for it. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: move tegra20 to common infraPeter De Schrijver1-402/+255
Move tegra20 to common tegra clock infrastructure. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: move tegra30 to common infraPeter De Schrijver1-893/+401
Move tegra30 to common tegra clock infrastructure. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: introduce common gen4 super clockPeter De Schrijver4-74/+155
Introduce a common function which performs super clock initialization for Tegra114 and beyond. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: move PMC, fixed clocks to common filesPeter De Schrijver5-74/+253
Introduce new files for fixed and PMC clocks common between several Tegra SoCs and move Tegra114 to this new infrastructure. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.