aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/clk
AgeCommit message (Collapse)AuthorFilesLines
2013-06-20Merge tag 'zynq-dt-for-3.11' of git://git.xilinx.com/linux-xlnx into next/dtArnd Bergmann5-379/+772
From Michal Simek: arm: Xilinx Zynq dt changes for v3.11 The branch contains: - DT uart handling cleanup - Support for zc706 and zed board - Removal of board compatible string * tag 'zynq-dt-for-3.11' of git://git.xilinx.com/linux-xlnx: arm: dt: zynq: Add support for the zed platform arm: dt: zynq: Add support for the zc706 platform arm: dt: zynq: Use 'status' property for UART nodes arm: zynq: Remove board specific compatibility string clk: zynq: Remove deprecated clock code arm: zynq: Migrate platform to clock controller clk: zynq: Add clock controller driver clk: zynq: Factor out PLL driver Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20ARM: sirf: use CONFIG_SIRF rather than CONFIG_PRIMA2 where necessaryArnd Bergmann1-1/+1
I got a build error today that made me realize that it is not possible to build a kernel for a SiRF platform without enabling CONFIG_PRIMA2, since a lot of common code depends on CONFIG_PRIMA2. This fixes all occurences that appear like common SiRF code. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Barry Song <Baohua.Song@csr.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-06-19ACPI / LPSS: add support for Intel BayTrailMika Westerberg1-3/+1
Intel BayTrail has almost the same Low Power Subsystem than Lynxpoint with few differences. Peripherals are clocked with different speeds (typically lower) and the clock is not always gated. To support this we add possibility to share a common fixed rate clock and make clock gating optional. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-19clk: exynos5420: register clocks using common clock frameworkChander Kashyap2-0/+763
The EXYNOS5420 clocks are statically listed and registered using the Samsung specific common clock helper functions. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Cc: Mike Turquette <mturquette@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-18clk: tegra: T114: add DFLL DVCO reset controlPaul Walmsley2-0/+39
Add DFLL DVCO reset line control functions to the CAR IP block driver. The DVCO present in the DFLL IP block has a separate reset line, exposed via the CAR IP block. This reset line is asserted upon SoC reset. Unless something (such as the DFLL driver) deasserts this line, the DVCO will not oscillate, although reads and writes to the DFLL IP block will complete. Thanks to Aleksandr Frid <afrid@nvidia.com> for identifying this and saving hours of debugging time. Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com> Cc: Aleksandr Frid <afrid@nvidia.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-18clk: tegra: T114: add DFLL source clocksPaul Walmsley1-0/+11
Add the input clocks needed by the DFLL IP blocks. Initialize them to 51MHz (as required by the DFLL GFD) and to use the PLL_P clock source. This patch is a collaboration with Peter De Schrijver <pdeschrijver@nvidia.com>. Thanks to Laxman Dewangan <ldewangan@nvidia.com> for identifying the requirement to keep the DFLL clocks enabled to resolve PWR_I2C timeout issues. Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Andrew Chew <achew@nvidia.com> Cc: Matthew Longnecker <mlongnecker@nvidia.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-19clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2Padmavathi Venna1-2/+3
This patch adds enum entries for div_i2s1 and div_i2s2 which are required for i2s1 and i2s2 controllers. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19clk: samsung: register audio subsystem clocks using common clock frameworkPadmavathi Venna2-0/+134
Audio subsystem is introduced in s5pv210 and exynos platforms. This has seperate clock controller which can control i2s0 and pcm0 clocks. This patch registers the audio subsystem clocks with the common clock framework on Exynos family. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-18clk: tegra: T114: add FCPU clock shaper programming, needed by the DFLLPaul Walmsley2-0/+122
Add clock functions to initialize, enable, and disable the FCPU clock shapers, based on the FCPU voltage rail state. These will be used by the DFLL clocksource driver code. This version of the patch contains a fix for a problem noticed by Andrew Chew <achew@nvidia.com>, where some of the FINETRIM_R bitfields were incorrectly defined. Based on code originally written by Aleksandr Frid <afrid@nvidia.com>. Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com> Cc: Andrew Chew <achew@nvidia.com> Reviewed-by: Andrew Chew <achew@nvidia.com> Cc: Matthew Longnecker <mlongnecker@nvidia.com> Cc: Aleksandr Frid <afrid@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-17ARM: u300: convert MMC/SD clock to device treeLinus Walleij1-5/+17
This converts the last of the U300 clocks to being probed from the device tree. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17ARM: u300: move the gated system controller clocks to DTLinus Walleij1-109/+211
This moves the slow, fast, AHB bridge and "rest" clocks on the U300 system controller over to registration from the device tree. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17clk: move the U300 fixed and fixed-factor to DTLinus Walleij1-20/+13
This converts the fixed and fixed-factor clocks in the U300 platform to register themselves from the device tree. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17ARM: u300: push down syscon registersLinus Walleij1-1/+342
Get rid of the <mach/syscon.h> header as a prerequisite for multiplatform support. Do this by pushing the registers down to their respective drivers and deleting the unused remainder. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16ARM: tegra30: clocks: Fix pciex clock registrationJay Agarwal1-5/+6
Registering pciex as peripheral clock instead of fixed clock as tegra_perih_reset_assert(deassert) api of this clock api gives warning and ultimately does not succeed to assert(deassert) Signed-off-by: Jay Agarwal <jagarwal@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-15clk: gate: add CLK_GATE_HIWORD_MASKHaojian Zhuang1-5/+18
In Rockchip Cortex-A9 based chips, they don't use paradigm of reading-changing-writing the register contents. Instead they use a hiword mask to indicate the changed bits. When b1 should be set as gate, it also needs to indicate the change by setting hiword mask (b1 << 16). The patch adds gate flag for this usage. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-15clk: divider: add CLK_DIVIDER_HIWORD_MASK flagHaojian Zhuang1-2/+13
In both Hisilicon & Rockchip Cortex-A9 based chips, they don't use the paradigm of reading-changing-writing the register contents. Instead they use a hiword mask to indicate the changed bits. When b01 should be set as setting divider, it also needs to indicate the change by setting hiword mask (b11 << 16). The patch adds divider flag for this usage. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-15clk: mux: add CLK_MUX_HIWORD_MASKHaojian Zhuang1-2/+15
In both Hisilicon & Rockchip Cortex-A9 based chips, they don't use the paradigm of reading-changing-writing the register contents. Instead they use a hiword mask to indicate the changed bits. When b01 should be set as switching mux, it also needs to indicate the change by setting hiword mask (b11 << 16). The patch adds mux flag for this usage. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-15clk: Always notify whole subtree when reparentingSoren Brinkmann1-2/+1
A clock's notifier count only reflects notifiers which are registered directly for that clock. A reparent operation though affects the whole subtree because of a potential rate change. When issuing the pre rate change notifications only the notifier count for the clock to be changed is considered and notifiers for subclocks may never be called. Resulting in clocks in the subtree which have registered notifiers, may receive a POST_- or ABORT_RATE_CHANGE notification, without a PRE_RATE_CHANGE_NOTIFICATION. Therefore always traverse the whole subtree when issueing pre rate change notifications during a reparent operation. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-14Merge tag 'tegra-for-3.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/socOlof Johansson1-1/+22
From Stephen Warren: ARM: tegra: core SoC support enhancements This branch contains fixes and enhancement for core Tegra Soc support: * CPU hotplug support for Tegra114. * Some preliminary work on Tegra114 CPU sleep modes. * Minor fix for EMC table DT parsing. * tag 'tegra-for-3.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ARM: tegra: don't pass CPU ID to tegra_{set,clear}_cpu_in_lp2 ARM: tegra: cpuidle: using IS_ENABLED for multi SoCs management in init func ARM: tegra: hook tegra_tear_down_cpu function in the PM suspend init function ARM: tegra: cpuidle: move the init function behind the suspend init function ARM: tegra: remove ifdef in the tegra_resume ARM: tegra: add cpu_disable for hotplug ARM: tegra114: add CPU hotplug support clk: tegra114: implement wait_for_reset and disable_clock for tegra_cpu_car_ops ARM: tegra114: add power up sequence for warm boot CPU ARM: tegra: make tegra_resume can work for Tegra114 ARM: tegra: skip SCU and PL310 code when CPU is not Cortex-A9 ARM: tegra: add an assembly marco to check Tegra SoC ID ARM: tegra: emc: correction of ram-code parsing from dt Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-12Merge tag 'exynos-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dtOlof Johansson6-8/+32
From Kukjin Kim: Update exynos DT for - usb3phy and dwc3 for exynos5250 - keypad for exynos4412 - TMU clock for exynos4210 - MFC clock for exynos4 - DP controller for exynos5250 - G2D clock for exynos4 - some exynos boards * tag 'exynos-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (456 commits) ARM: dts: add ohci and ehci controller nodes for EXYNOS5440 ARM: dts: Update G2D documentation for clock entries ARM: dts: Add clock entries to G2D node for exynos4x12 ARM: dts: Add clock entries to G2D node for exynos4210 ARM: dts: Remove duplicate and add missing G2D nodes clk: exynos4: Add additional G2D clocks ARM: dts: Document DP clock in samsung,exynos5-dp binding ARM: dts: add pin state information for DP HPD support to Exynos5250 ARM: dts: add dts node for the ahci sata exynos5440 ARM: dts: add vmmc regulator support for ODROID-X ARM: dts: add max77686 node entry for ODROID-X ARM: dts: Enable RTC by default on EXYNOS5440 ARM: dts: Add display timing node to exynos5250-arndale.dts ARM: dts: Add clock provider information for DP controller in Exynos5250 SoC ARM: dts: Add DT node for DP controller for Arndale Board ARM: dts: Remove combiner IRQ node from exynos4x12.dtsi ARM: dts: add max8997 device node for exynos4210-origen board ARM: dts: Enable TMU on Origen4210 board ARM: dts: Add TMU clock entries to exynos4210.dtsi ARM: dts: Update MFC documentation for clock entries ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-11clk: exynos5250: Add CLK_IGNORE_UNUSED flag for pmu clockTushar Behera1-1/+1
Currently 'pmu' clock is not handled by any of the drivers. Also before the introduction of CCF, this clock was not defined, hence was left enabled always. When this clock is disabled, software reset register becomes inaccessible and system reboot doesn't work. Upon restoring the default behaviour, system reboot starts working. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-11clk: honor CLK_GET_RATE_NOCACHE in clk_set_ratePeter De Schrijver1-1/+1
clk_set_rate() uses clk->rate directly. This causes problems if the clock is marked as CLK_GET_RATE_NOCACHE. Hence call clk_get_rate() to get the current rate. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-11clk: use clk_get_rate() for debugfsPeter De Schrijver1-2/+2
debugfs uses the rate field directly. However this ignores the CLK_GET_RATE_NOCACHE flag. Call clk_get_rate() instead. Tested-by: Mark Zhang <markz@nvidia.com> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-11clk: tegra: Use override bits when neededPeter De Schrijver1-32/+48
PLLM has override bits in the PMC. Use those when PLLM_OVERRIDE_ENABLE is set. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-11clk: tegra: override bits for Tegra30 PLLMPeter De Schrijver1-0/+18
Define override bits for Tegra30 PLLM. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-11clk: tegra: override bits for Tegra114 PLLMPeter De Schrijver1-0/+9
Define override bits for Tegra114 PLLM. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: fixed up trivial merge conflict]
2013-06-11clk: tegra: Add fields for override bitsPeter De Schrijver1-0/+8
PLLM can have override bits in the PMC. Describe those in the PLL parameters. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-11clk: tegra: fix sclk_parentsPeter De Schrijver1-1/+1
Use the correct parents for sclk according to the TRM. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-11clk: tegra: fix pllre initilizationPeter De Schrijver1-2/+1
The PLLRE flags weren't set correctly. Fixed in this patch. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-11clk: tegra: PLL m,n,p init for Tegra114Peter De Schrijver1-0/+77
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-11clk: tegra: allow PLL m,n,p init from SoC filesPeter De Schrijver2-39/+53
The m,n,p fields don't have the same bit offset and width across all PLLs. This patch allows SoC specific files to indicate the offset and width. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-11clk: tegra: pllp_out2 divider is int onlyPeter De Schrijver1-2/+2
The pllp_out2 should be integer only, the fractional bit should always be 0. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-11ARM: socfpga: Add support to gate peripheral clocksDinh Nguyen1-9/+185
Add support to gate the clocks that directly feed peripherals. For clocks with multiple parents, add the ability to determine the correct parent, and also set parents. Also add support to calculate and set the clocks' rate. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Acked-by: Mike Turquette <mturquette@linaro.org> Cc: Mike Turquette <mturquette@linaro.org> CC: Arnd Bergmann <arnd@arndb.de> CC: Olof Johansson <olof@lixom.net> Cc: Pavel Machek <pavel@denx.de> CC: <linux@arm.linux.org.uk> v4: - Add Acked-by: Mike Turquette v3: - Addressed comments from Pavel v2: - Fix space/indent errors - Add streq for strcmp == 0 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-11clk: tegra: pllc and pllxc should use pdiv_mapPeter De Schrijver1-80/+82
The pllc and pllxc code weren't always using the correct pdiv_map to map between the post divider value and the hw p field. This could result in illegal values being programmed in the hw. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-11Merge branch 'clps711x/soc' into next/socOlof Johansson6-6/+25
From Alexander Shiyan, this is a series of cleanups of clps711x, movig it closer to multiplatform and cleans up a bunch of old code. * clps711x/soc: ARM: clps711x: Update defconfig ARM: clps711x: Add support for SYSCON driver ARM: clps711x: edb7211: Control LCD backlight via PWM ARM: clps711x: edb7211: Add support for I2C ARM: clps711x: Optimize interrupt handling ARM: clps711x: Add clocksource framework ARM: clps711x: Replace "arch_initcall" in common code with ".init_early" ARM: clps711x: Move specific definitions from hardware.h to boards files ARM: clps711x: p720t: Define PLD registers as GPIOs ARM: clps711x: autcpu12: Move remaining specific definitions to board file ARM: clps711x: autcpu12: Special driver for handling memory is removed ARM: clps711x: autcpu12: Add support for NOR flash ARM: clps711x: autcpu12: Move LCD DPOT definitions to board file ARM: clps711x: Set PLL clock to zero if we work from 13 mHz source ARM: clps711x: Remove NEED_MACH_MEMORY_H dependency ARM: clps711x: Re-add GPIO support GPIO: clps711x: Add DT support GPIO: clps711x: Rewrite driver for using generic GPIO code + Linux 3.10-rc4 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-11clk: spear: fix build error for spear3xxArnd Bergmann1-1/+1
This patch is required to be able to disable spear320 support after the spear320_clk_init() prototype changed for the real function but not for the dummy. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-12clk: exynos4: Add additional G2D clocksSachin Kamat1-2/+7
Add G2D clocks for Exynos4x12 SoC and sclk_fimg2d required by G2D IP. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-11clk: samsung: Fix pll36xx_recalc_rate to handle kdiv properlyDoug Anderson1-2/+3
The KDIV value is often listed as unsigned but it needs to be treated as a 16-bit signed value when using it in calculations. Fix our rate recalculation to do this correctly. Before doing this, I tried setting EPLL on exynos5250 to: rate, m, p, s, k = 80000000, 107, 2, 4, 43691 This rate is exactly from the table in the exynos5250 user manual. I read this back as 80750003 with: cat /sys/kernel/debug/clk/fin_pll/fout_epll/clk_rate After this patch, it reads back as 80000003 Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Reviewed-by: Vikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-10clk: divider: do not propagate rate change request when unnecessaryShawn Guo1-0/+10
If the current rate of parent clock is sufficient to provide child a requested rate with a proper divider setting, the rate change request should not be propagated. Instead, changing the divider setting is good enough to get child clock run at the requested rate. On an imx6q clock configuration illustrated below, ahb --> ipg --> ipg_per 132M 66M 66M calling clk_set_rate(ipg_per, 22M) with the current clk_divider_bestdiv() implementation will result in the rate change up to ahb level like the following, because of the unnecessary/incorrect rate change propagation. ahb --> ipg --> ipg_per 66M 22M 22M Fix the problem by trying to see if the requested rate can be achieved by simply changing the divider value, and in that case return the divider immediately from function clk_divider_bestdiv() as the best one, so that all those unnecessary rate change propagation can be saved. Reported-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-10clk: exynos5250: Add sclk_mpll to the parent list of mout_cpu clockTushar Behera1-1/+1
'mout_mpll' is added the list of parent clocks for 'mout_cpu'. 'mout_mpll' is an alias to the clock 'sclk_mpll'. Hence 'sclk_mpll' should be added to the list of parent clocks. This results in an error when cpufreq driver for EXYNOS5250 tries to set 'mout_mpll' as a parent for 'mout_cpu'. clk_set_parent: clk sclk_mpll can not be parent of clk mout_cpu Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-10clk: exynos5250: Update cpufreq related clocks for EXYNOS5250Tushar Behera1-3/+3
cpufreq driver for EXYNOS5250 is not a platform driver, hence we cannot currently pass the clock names through a device tree node. Instead, we need to make them available through a global alias. cpufreq driver for EXYNOS5250 requires four clocks - 'armclk', 'mout_cpu', 'mout_mpll' and 'mout_apll'. 'armclk' has already been defined with an alias, 'mout_cpu', 'mout_mpll' and 'mout_apll' are now defined with an alias. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-07Merge tag 'zynq-clk-for-3.11' of git://git.xilinx.com/linux-xlnx into next/socOlof Johansson5-379/+772
From Michal Simek: arm: Xilinx Zynq clock changes for v3.11 Change Xilinx Zynq DT clock description which reflects logical abstraction of Zynq's clock tree. - Refactor PLL driver - Use new clock controller driver - Change timer and uart drivers * tag 'zynq-clk-for-3.11' of git://git.xilinx.com/linux-xlnx: clk: zynq: Remove deprecated clock code arm: zynq: Migrate platform to clock controller clk: zynq: Add clock controller driver clk: zynq: Factor out PLL driver Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-06clk: remove notifier from list before freeing itLai Jiangshan1-0/+1
The @cn is stay in @clk_notifier_list after it is freed, it cause memory corruption. Example, if @clk is registered(first), unregistered(first), registered(second), unregistered(second). The freed @cn will be used when @clk is registered(second), and the bug will be happened when @clk is unregistered(second): [ 517.040000] clk_notif_dbg clk_notif_dbg.1: clk_notifier_unregister() [ 517.040000] Unable to handle kernel paging request at virtual address 00df3008 [ 517.050000] pgd = ed858000 [ 517.050000] [00df3008] *pgd=00000000 [ 517.060000] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 517.060000] Modules linked in: clk_notif_dbg(O-) [last unloaded: clk_notif_dbg] [ 517.060000] CPU: 1 PID: 499 Comm: modprobe Tainted: G O 3.10.0-rc3-00119-ga93cb29-dirty #85 [ 517.060000] task: ee1e0180 ti: ee3e6000 task.ti: ee3e6000 [ 517.060000] PC is at srcu_readers_seq_idx+0x48/0x84 [ 517.060000] LR is at srcu_readers_seq_idx+0x60/0x84 [ 517.060000] pc : [<c0052720>] lr : [<c0052738>] psr: 80070013 [ 517.060000] sp : ee3e7d48 ip : 00000000 fp : ee3e7d6c [ 517.060000] r10: 00000000 r9 : ee3e6000 r8 : 00000000 [ 517.060000] r7 : ed84fe4c r6 : c068ec90 r5 : c068e430 r4 : 00000000 [ 517.060000] r3 : 00df3000 r2 : 00000000 r1 : 00000002 r0 : 00000000 [ 517.060000] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 517.060000] Control: 18c5387d Table: 2d85804a DAC: 00000015 [ 517.060000] Process modprobe (pid: 499, stack limit = 0xee3e6238) [ 517.060000] Stack: (0xee3e7d48 to 0xee3e8000) .... [ 517.060000] [<c0052720>] (srcu_readers_seq_idx+0x48/0x84) from [<c0052790>] (try_check_zero+0x34/0xfc) [ 517.060000] [<c0052790>] (try_check_zero+0x34/0xfc) from [<c00528b0>] (srcu_advance_batches+0x58/0x114) [ 517.060000] [<c00528b0>] (srcu_advance_batches+0x58/0x114) from [<c0052c30>] (__synchronize_srcu+0x114/0x1ac) [ 517.060000] [<c0052c30>] (__synchronize_srcu+0x114/0x1ac) from [<c0052d14>] (synchronize_srcu+0x2c/0x34) [ 517.060000] [<c0052d14>] (synchronize_srcu+0x2c/0x34) from [<c0053a08>] (srcu_notifier_chain_unregister+0x68/0x74) [ 517.060000] [<c0053a08>] (srcu_notifier_chain_unregister+0x68/0x74) from [<c0375a78>] (clk_notifier_unregister+0x7c/0xc0) [ 517.060000] [<c0375a78>] (clk_notifier_unregister+0x7c/0xc0) from [<bf008034>] (clk_notif_dbg_remove+0x34/0x9c [clk_notif_dbg]) [ 517.060000] [<bf008034>] (clk_notif_dbg_remove+0x34/0x9c [clk_notif_dbg]) from [<c02bb974>] (platform_drv_remove+0x24/0x28) [ 517.060000] [<c02bb974>] (platform_drv_remove+0x24/0x28) from [<c02b9bf8>] (__device_release_driver+0x8c/0xd4) [ 517.060000] [<c02b9bf8>] (__device_release_driver+0x8c/0xd4) from [<c02ba680>] (driver_detach+0x9c/0xc4) [ 517.060000] [<c02ba680>] (driver_detach+0x9c/0xc4) from [<c02b99c4>] (bus_remove_driver+0xcc/0xfc) [ 517.060000] [<c02b99c4>] (bus_remove_driver+0xcc/0xfc) from [<c02bace4>] (driver_unregister+0x54/0x78) [ 517.060000] [<c02bace4>] (driver_unregister+0x54/0x78) from [<c02bbb44>] (platform_driver_unregister+0x1c/0x20) [ 517.060000] [<c02bbb44>] (platform_driver_unregister+0x1c/0x20) from [<bf0081f8>] (clk_notif_dbg_driver_exit+0x14/0x1c [clk_notif_dbg]) [ 517.060000] [<bf0081f8>] (clk_notif_dbg_driver_exit+0x14/0x1c [clk_notif_dbg]) from [<c00835e4>] (SyS_delete_module+0x200/0x28c) [ 517.060000] [<c00835e4>] (SyS_delete_module+0x200/0x28c) from [<c000edc0>] (ret_fast_syscall+0x0/0x48) [ 517.060000] Code: e5973004 e7911102 e0833001 e2881002 (e7933101) Cc: stable@kernel.org Reported-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Tested-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: shortened $SUBJECT]
2013-06-06clk: ux500: Clocks definition for u8540Philippe Begnic1-1/+559
First clocks definition version of PRCMU and PRCC clocks for u8540 platform Signed-off-by: Philippe Begnic <philippe.begnic@st.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-06clk: ux500: Pass clock base adresses in initcall for u8540 and u9540Philippe Begnic2-4/+4
Align on u8500 version, pass clock base address in clk_init functions for u8540 and u9540. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Philippe Begnic <philippe.begnic@st.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-04clk: tegra114: Fix msenc clock registerMikko Perttunen1-1/+1
The msenc clock's register was set to the usb3 clock's register. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-05-31Merge tag 'seb_clk-3.11' of git://git.infradead.org/users/jcooper/linux into next/socOlof Johansson13-1001/+1064
From Jason Cooper: mvebu clock restructuring for v3.11 - clk: mvebu - reorganize by SoC to remove built up #ifdefs - add clk flags per clock gate * tag 'seb_clk-3.11' of git://git.infradead.org/users/jcooper/linux: clk: mvebu: disintegrate obsolete file ARM: mvebu: move DT boards to SoC-centric clock init ARM: kirkwood: move DT boards to SoC-centric clock init ARM: dove: move DT boards to SoC-centric clock init clk: mvebu: add Armada XP SoC-centric clock init clk: mvebu: add Armada 370 SoC-centric clock init clk: mvebu: add Kirkwood SoC-centric clock init clk: mvebu: add Dove SoC-centric clock init clk: mvebu: add common clock functions for core clk and clk gating clk: mvebu: introduce per-clock-gate flags
2013-05-31Merge tag 'pcie-3.11-2' of git://git.infradead.org/users/jcooper/linux into next/socOlof Johansson1-6/+12
PCI-e driver for mvebu. * tag 'pcie-3.11-2' of git://git.infradead.org/users/jcooper/linux: pci: mvebu: fix return value check in mvebu_pcie_probe() arm: mvebu: PCIe support is now available on mvebu pci: PCIe driver for Marvell Armada 370/XP systems clk: mvebu: add more PCIe clocks for Armada XP clk: mvebu: create parent-child relation for PCIe clocks on Armada 370 of/pci: Add of_pci_parse_bus_range() function of/pci: Add of_pci_get_devfn() function of/pci: Provide support for parsing PCI DT ranges property Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-31clk: tegra: Use common of_clk_init functionPrashant Gaikwad5-33/+6
Use common of_clk_init() function for clocks initialization. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Reviewed-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-05-31clk: tegra114: correctly output clk_32kAlexandre Courbot1-0/+3
Tegra has a blink timer register that allows to modulate the clk_32k clock before outputting it. Since clk_32k is presented to the kernel as a fixed clock, make sure this register does not tamper with the clock frequency and that clk_32k is outputted as-is, similarly to what is done on t20 and t30. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.