| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull clocksource updates from Ingo Molnar:
"Misc clocksource/clockevent driver updates that came in a bit late but
are ready for v5.2"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
misc: atmel_tclib: Do not probe already used TCBs
clocksource/drivers/timer-atmel-tcb: Convert tc_clksrc_suspend|resume() to static
clocksource/drivers/tcb_clksrc: Rename the file for consistency
clocksource/drivers/timer-atmel-pit: Rework Kconfig option
clocksource/drivers/tcb_clksrc: Move Kconfig option
ARM: at91: Implement clocksource selection
clocksource/drivers/tcb_clksrc: Use tcb as sched_clock
clocksource/drivers/tcb_clksrc: Stop depending on atmel_tclib
ARM: at91: move SoC specific definitions to SoC folder
clocksource/drivers/timer-milbeaut: Cleanup common register accesses
clocksource/drivers/timer-milbeaut: Add shutdown function
clocksource/drivers/timer-milbeaut: Fix to enable one-shot timer
clocksource/drivers/tegra: Rework for compensation of suspend time
clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804
clocksource/drivers/sun4i: Add a compatible for suniv
dt-bindings: timer: Add Allwinner suniv timer
|
|
Pull ARM SoC platform updates from Olof Johansson:
"SoC updates, mostly refactorings and cleanups of old legacy platforms.
Major themes this release:
- Conversion of ixp4xx to a modern platform (drivers, DT, bindings)
- Moving some of the ep93xx headers around to get it closer to
multiplatform enabled.
- Cleanups of Davinci
This also contains a few patches that were queued up as fixes before
5.1 but I didn't get sent in before release"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
ARM: debug-ll: add default address for digicolor
ARM: u300: regulator: add MODULE_LICENSE()
ARM: ep93xx: move private headers out of mach/*
ARM: ep93xx: move pinctrl interfaces into include/linux/soc
ARM: ep93xx: keypad: stop using mach/platform.h
ARM: ep93xx: move network platform data to separate header
ARM: stm32: add AMBA support for stm32 family
MAINTAINERS: update arch/arm/mach-davinci
ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu
ARM: dts: Add queue manager and NPE to the IXP4xx DTSI
soc: ixp4xx: qmgr: Add DT probe code
soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr
soc: ixp4xx: npe: Add DT probe code
soc: ixp4xx: Add DT bindings for IXP4xx NPE
soc: ixp4xx: qmgr: Pass resources
soc: ixp4xx: Remove unused functions
soc: ixp4xx: Uninline several functions
soc: ixp4xx: npe: Pass addresses as resources
ARM: ixp4xx: Turn the QMGR into a platform device
ARM: ixp4xx: Turn the NPE into a platform device
...
|
|
Merge in a few pending fixes from pre-5.1 that didn't get sent in:
MAINTAINERS: update arch/arm/mach-davinci
ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect
ARM: dts: imx6q-logicpd: Reduce inrush current on USBH1
ARM: dts: imx6q-logicpd: Reduce inrush current on start
ARM: dts: imx: Fix the AR803X phy-mode
ARM: dts: sun8i: a33: Reintroduce default pinctrl muxing
arm64: dts: allwinner: a64: Rename hpvcc-supply to cpvdd-supply
ARM: sunxi: fix a leaked reference by adding missing of_node_put
ARM: sunxi: fix a leaked reference by adding missing of_node_put
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Pull Kbuild updates from Masahiro Yamada:
- allow users to invoke 'make' out of the source tree
- refactor scripts/mkmakefile
- deprecate KBUILD_SRC, which was used to track the source tree
location for O= build.
- fix recordmcount.pl in case objdump output is localized
- turn unresolved symbols in external modules to errors from warnings
by default; pass KBUILD_MODPOST_WARN=1 to get them back to warnings
- generate modules.builtin.modinfo to collect .modinfo data from
built-in modules
- misc Makefile cleanups
* tag 'kbuild-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits)
.gitignore: add more all*.config patterns
moduleparam: Save information about built-in modules in separate file
Remove MODULE_ALIAS() calls that take undefined macro
.gitignore: add leading and trailing slashes to generated directories
scripts/tags.sh: fix direct execution of scripts/tags.sh
scripts: override locale from environment when running recordmcount.pl
samples: kobject: allow CONFIG_SAMPLE_KOBJECT to become y
samples: seccomp: turn CONFIG_SAMPLE_SECCOMP into a bool option
kbuild: move Documentation to vmlinux-alldirs
kbuild: move samples/ to KBUILD_VMLINUX_OBJS
modpost: make KBUILD_MODPOST_WARN also configurable for external modules
kbuild: check arch/$(SRCARCH)/include/generated before out-of-tree build
kbuild: remove unneeded dependency for include/config/kernel.release
memory: squash drivers/memory/Makefile.asm-offsets
kbuild: use $(srctree) instead of KBUILD_SRC to check out-of-tree build
kbuild: mkmakefile: generate a simple wrapper of top Makefile
kbuild: mkmakefile: do not check the generated Makefile marker
kbuild: allow Kbuild to start from any directory
kbuild: pass $(MAKECMDGOALS) to sub-make as is
kbuild: fix warning "overriding recipe for target 'Makefile'"
...
|
|
Pull staging / IIO driver updates from Greg KH:
"Here is the big staging and iio driver update for 5.2-rc1.
Lots of tiny fixes all over the staging and IIO driver trees here,
along with some new IIO drivers.
The "counter" subsystem was added in here as well, as it is needed by
the IIO drivers and subsystem.
Also we ended up deleting two drivers, making this pull request remove
a few hundred thousand lines of code, always a nice thing to see. Both
of the drivers removed have been replaced with "real" drivers in their
various subsystem directories, and they will be coming to you from
those locations during this merge window.
There are some core vt/selection changes in here, that was due to some
cleanups needed for the speakup fixes. Those have all been acked by
the various subsystem maintainers (i.e. me), so those are ok.
We also added a few new drivers, for some odd hardware, giving new
developers plenty to work on with basic coding style cleanups to come
in the near future.
Other than that, nothing unusual here.
All of these have been in linux-next for a while with no reported
issues, other than an odd gcc warning for one of the new drivers that
should be fixed up soon"
[ I fixed up the warning myself - Linus ]
* tag 'staging-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (663 commits)
staging: kpc2000: kpc_spi: Fix build error for {read,write}q
Staging: rtl8192e: Remove extra space before break statement
Staging: rtl8192u: ieee80211: Fix if-else indentation warning
Staging: rtl8192u: ieee80211: Fix indentation errors by removing extra spaces
staging: most: cdev: fix chrdev_region leak in mod_exit
staging: wlan-ng: Fix improper SPDX comment style
staging: rtl8192u: ieee80211: Resolve ERROR reported by checkpatch
staging: vc04_services: bcm2835-camera: Compress two lines into one line
staging: rtl8723bs: core: Use !x in place of NULL comparison.
staging: rtl8723bs: core: Prefer using the BIT Macro.
staging: fieldbus: anybus-s: fix wait_for_completion_timeout return handling
staging: kpc2000: fix up build problems with readq()
staging: rtlwifi: move remaining phydm .h files
staging: rtlwifi: strip down phydm .h files
staging: rtlwifi: delete the staging driver
staging: fieldbus: anybus-s: rename bus id field to avoid confusion
staging: fieldbus: anybus-s: keep device bus id in bus endianness
Staging: sm750fb: Change *array into *const array
staging: rtl8192u: ieee80211: Fix spelling mistake
staging: rtl8192u: ieee80211: Replace bit shifting with BIT macro
...
|
|
These files do not define (USBHS_)DRIVER_NAME. Yet, they can be
successfully compiled because they are never built as a module by
anyone, i.e, the MODULE_ALIAS() calls are always no-op.
A problem showed up when a patch "moduleparam: Save information about
built-in modules in separate file" was applied. With this new feature,
MODULE_*() will be populated even if the callers are built-in.
To avoid the build errors, the lines referencing to the undefined
macro must be removed.
The complete fix is to remove all MODULE_* and #include <linux/module.h>
like many "make ... explicitly non-modular" commits did.
For now, I am touching only the offending lines.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
|
|
Pull arm64 updates from Will Deacon:
"Mostly just incremental improvements here:
- Introduce AT_HWCAP2 for advertising CPU features to userspace
- Expose SVE2 availability to userspace
- Support for "data cache clean to point of deep persistence" (DC PODP)
- Honour "mitigations=off" on the cmdline and advertise status via
sysfs
- CPU timer erratum workaround (Neoverse-N1 #1188873)
- Introduce perf PMU driver for the SMMUv3 performance counters
- Add config option to disable the kuser helpers page for AArch32 tasks
- Futex modifications to ensure liveness under contention
- Rework debug exception handling to seperate kernel and user
handlers
- Non-critical fixes and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits)
Documentation: Add ARM64 to kernel-parameters.rst
arm64/speculation: Support 'mitigations=' cmdline option
arm64: ssbs: Don't treat CPUs with SSBS as unaffected by SSB
arm64: enable generic CPU vulnerabilites support
arm64: add sysfs vulnerability show for speculative store bypass
arm64: Fix size of __early_cpu_boot_status
clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters
clocksource/arm_arch_timer: Remove use of workaround static key
clocksource/arm_arch_timer: Drop use of static key in arch_timer_reg_read_stable
clocksource/arm_arch_timer: Direcly assign set_next_event workaround
arm64: Use arch_timer_read_counter instead of arch_counter_get_cntvct
watchdog/sbsa: Use arch_timer_read_counter instead of arch_counter_get_cntvct
ARM: vdso: Remove dependency with the arch_timer driver internals
arm64: Apply ARM64_ERRATUM_1188873 to Neoverse-N1
arm64: Add part number for Neoverse N1
arm64: Make ARM64_ERRATUM_1188873 depend on COMPAT
arm64: Restrict ARM64_ERRATUM_1188873 mitigation to AArch32
arm64: mm: Remove pte_unmap_nested()
arm64: Fix compiler warning from pte_unmap() with -Wunused-but-set-variable
arm64: compat: Reduce address limit for 64K pages
...
|
|
Statisticize tc_clksrc_suspend and tc_clksrc_resume.
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
For the sake of consistency, let's rename the file to a name similar
to other file names in this directory.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Allow building the PIT driver when COMPILE_TEST is enabled. Also remove its
default value so it can be disabled.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Move the ATMEL_TCB_CLKSRC option to drivers/clocksource and make it silent
if COMPILE_TEST is not selected.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Now that the driver is registered early enough, use the TCB as the
sched_clock which is much more accurate than the jiffies implementation.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
atmel_tclib is probed too late in the boot process to be able to use the
TCB as the boot clocksource. This is an issue for SoCs without the PIT
(sams70, samv70 and samv71 families) as they simply currently can't boot.
Get rid of the atmel_tclib dependency and probe everything on our own using
the correct device tree binding.
This also allows getting rid of ATMEL_TCB_CLKSRC_BLOCK and makes the driver
a bit more flexible as the TCB is not hardcoded in the kernel anymore.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Move linux/atmel_tc.h to the SoC specific folder include/soc/at91.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Aggregate common register accesses into shared functions for
maintainability.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add a shutdown operation to support shutdown timer.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Fix mlb_set_oneshot_state() to enable one-shot timer.
The function should stop and start a timer, but "start" statement was
dropped. Kick the register to start one-shot timer.
Fixes: b58f28f306db ("clocksource/drivers/timer-milbeaut: Introduce timer for Milbeaut SoCs")
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Since the clocksource framework has the support for suspend time
compensation. Re-work the driver to use that, so we can reduce the
duplicate code.
Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
This is only used on arm and arm64 platforms. Add COMPILE_TEST option.
Tested with 5.1-rc3+ on Fedora/RISCV. CONFIG_ARM_TIMER_SP804 no more shows
up in riscv config.
Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The suniv (new F-series) chip has a timer with less functionality than
the A10 timer, e.g. it has only 3 channels.
Add a new compatible for it. As we didn't use the extra channels on A10
either now, the code needn't to be changed.
The suniv chip is based on ARM926EJ-S CPU, thus it has no architecture timer.
Register sun4i_timer as sched_clock on it.
Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Conflicts:
arch/arm64/Kconfig
arch/arm64/include/asm/arch_timer.h
|
|
Instead of always going via arch_counter_get_cntvct_stable to access the
counter workaround, let's have arch_timer_read_counter point to the
right method.
For that, we need to track whether any CPU in the system has a
workaround for the counter. This is done by having an atomic variable
tracking this.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The use of a static key in a hotplug path has proved to be a real
nightmare, and makes it impossible to have scream-free lockdep
kernel.
Let's remove the static key altogether, and focus on something saner.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
When a given timer is affected by an erratum and requires an
alternative implementation of set_next_event, we do a rather
complicated dance to detect and call the workaround on each
set_next_event call.
This is clearly idiotic, as we can perfectly detect whether
this CPU requires a workaround while setting up the clock event
device.
This only requires the CPU-specific detection to be done a bit
earlier, and we can then safely override the set_next_event pointer
if we have a workaround associated to that CPU.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by; Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
We currently deal with ARM64_ERRATUM_1188873 by always trapping EL0
accesses for both instruction sets. Although nothing wrong comes out
of that, people trying to squeeze the last drop of performance from
buggy HW find this over the top. Oh well.
Let's change the mitigation by flipping the counter enable bit
on return to userspace. Non-broken HW gets an extra branch on
the fast path, which is hopefully not the end of the world.
The arch timer workaround is also removed.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
This modernizes the IXP4xx platform and adds initial Device Tree
Support. We migrate to MULTI_IRQ_HANDLER, bumps the IRQs to
offset 16, converts to SPARSE_IRQ, then we add proper subsystem
drivers in each subsystem for irqchip, GPIO and clocksource and
switch over to using these new drivers.
Next we modernize the NPE and QMGR drivers and push them down
into drivers/soc.
This has been tested on the IXP4xx NSLU2 and the Gateworks
GW2358-4.
* tag 'ixp4xx-for-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: (31 commits)
ARM: dts: Add queue manager and NPE to the IXP4xx DTSI
soc: ixp4xx: qmgr: Add DT probe code
soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr
soc: ixp4xx: npe: Add DT probe code
soc: ixp4xx: Add DT bindings for IXP4xx NPE
soc: ixp4xx: qmgr: Pass resources
soc: ixp4xx: Remove unused functions
soc: ixp4xx: Uninline several functions
soc: ixp4xx: npe: Pass addresses as resources
ARM: ixp4xx: Turn the QMGR into a platform device
ARM: ixp4xx: Turn the NPE into a platform device
ARM: ixp4xx: Move IXP4xx QMGR and NPE headers
ARM: ixp4xx: Move NPE and QMGR to drivers/soc
ARM: dts: Add some initial IXP4xx device trees
ARM: ixp4xx: Add device tree boot support
ARM: ixp4xx: Add DT bindings
gpio: ixp4xx: Add OF probing support
gpio: ixp4xx: Add DT bindings
clocksource/drivers/ixp4xx: Add OF initialization support
clocksource/drivers/ixp4xx: Add DT bindings
...
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Common #defines have been moved to "linux/fsl/ftm.h". Thus making use of
this file.
Also FTM_SC_CLK_SHIFT has been renamed to FTM_SC_CLK_MASK_SHIFT.
Reviewed-by: Esben Haabendal <esben@haabendal.dk>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This adds support for setting up the IXP4xx timer driver from
device tree.
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This adds a new slightly rewritten timer driver for the
Intel IXP4xx clocksource, clockevent and delay timer.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
As we will exhaust the first 32 bits of AT_HWCAP let's start
exposing AT_HWCAP2 to userspace to give us up to 64 caps.
Whilst it's possible to use the remaining 32 bits of AT_HWCAP, we
prefer to expand into AT_HWCAP2 in order to provide a consistent
view to userspace between ILP32 and LP64. However internal to the
kernel we prefer to continue to use the full space of elf_hwcap.
To reduce complexity and allow for future expansion, we now
represent hwcaps in the kernel as ordinals and use a
KERNEL_HWCAP_ prefix. This allows us to support automatic feature
based module loading for all our hwcaps.
We introduce cpu_set_feature to set hwcaps which complements the
existing cpu_have_feature helper. These helpers allow us to clean
up existing direct uses of elf_hwcap and reduce any future effort
required to move beyond 64 caps.
For convenience we also introduce cpu_{have,set}_named_feature which
makes use of the cpu_feature macro to allow providing a hwcap name
without a {KERNEL_}HWCAP_ prefix.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
[will: use const_ilog2() and tweak documentation]
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Commit 008258d995a6 ("clocksource/drivers/timer-ti-dm: Make
omap_dm_timer_set_load_start() static") made omap_dm_time_set_load_start
static because its prototype was not defined in a header. Unfortunately,
this causes a build warning on multi_v7_defconfig because this function
is not used anywhere in this translation unit:
drivers/clocksource/timer-ti-dm.c:589:12: error: unused function
'omap_dm_timer_set_load_start' [-Werror,-Wunused-function]
In fact, omap_dm_timer_set_load_start hasn't been used anywhere since
commit f190be7f39a5 ("staging: tidspbridge: remove driver") and the
prototype was removed in commit 592ea6bd1fad ("clocksource: timer-ti-dm:
Make unexported functions static"), which is probably where this should
have happened.
Fixes: 592ea6bd1fad ("clocksource: timer-ti-dm: Make unexported functions static")
Fixes: 008258d995a6 ("clocksource/drivers/timer-ti-dm: Make omap_dm_timer_set_load_start() static")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The OX820 compatible is wrong is the driver, fix it.
Fixes: 2ea3401e2a84 ("clocksource/drivers/oxnas: Add OX820 compatible")
Reported-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
After this commit ded24019b6b6f(clocksource: arm_arch_timer: clean up
printk usage), the previous macro is redundant, so delete it.
And move the new macro to the previous position.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
When this is disabled, we get a link failure:
drivers/clocksource/timer-npcm7xx.o: In function `npcm7xx_timer_init':
timer-npcm7xx.c:(.init.text+0xf): undefined reference to `timer_of_init'
Fixes: 1c00289ecd12 ("clocksource/drivers/npcm: Add NPCM7xx timer driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Since board support for the CLPS711X platform was removed,
remove the board support from the clps711x-timer driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lkml.kernel.org/r/20181220111626.17140-1-shc_work@mail.ru
|
|
For all riscv architectures (RV32, RV64 and RV128), the clocksource
is a 64 bit incrementing counter.
Fix the clock source mask accordingly.
Tested on both 64bit and 32 bit virt machine in QEMU.
Fixes: 62b019436814 ("clocksource: new RISC-V SBI timer driver")
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Anup Patel <Anup.Patel@wdc.com>
Cc: Damien Le Moal <Damien.LeMoal@wdc.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190322215411.19362-1-atish.patra@wdc.com
|
|
Fix sparse warning:
drivers/clocksource/mips-gic-timer.c:70:18: warning:
symbol 'gic_compare_irqaction' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <daniel.lezcano@linaro.org>
Link: https://lkml.kernel.org/r/20190322144359.19516-1-yuehaibing@huawei.com
|
|
Fix sparse warning:
drivers/clocksource/timer-ti-dm.c:589:5: warning:
symbol 'omap_dm_timer_set_load_start' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <daniel.lezcano@linaro.org>
Link: https://lkml.kernel.org/r/20190322144302.6704-1-yuehaibing@huawei.com
|
|
Fix sparse warnings:
drivers/clocksource/tcb_clksrc.c:74:6: warning:
symbol 'tc_clksrc_suspend' was not declared. Should it be static?
drivers/clocksource/tcb_clksrc.c:89:6: warning:
symbol 'tc_clksrc_resume' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <nicolas.ferre@microchip.com>
Cc: <daniel.lezcano@linaro.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Link: https://lkml.kernel.org/r/20190322143940.12396-1-yuehaibing@huawei.com
|
|
Fix sparse warning:
drivers/clocksource/clps711x-timer.c:96:13: warning:
symbol 'clps711x_clksrc_init' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <daniel.lezcano@linaro.org>
Cc: <shc_work@mail.ru>
Cc: <linux-arm-kernel@lists.infradead.org>
Link: https://lkml.kernel.org/r/20190322143708.12716-1-yuehaibing@huawei.com
|
|
Pull KVM updates from Paolo Bonzini:
"ARM:
- some cleanups
- direct physical timer assignment
- cache sanitization for 32-bit guests
s390:
- interrupt cleanup
- introduction of the Guest Information Block
- preparation for processor subfunctions in cpu models
PPC:
- bug fixes and improvements, especially related to machine checks
and protection keys
x86:
- many, many cleanups, including removing a bunch of MMU code for
unnecessary optimizations
- AVIC fixes
Generic:
- memcg accounting"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (147 commits)
kvm: vmx: fix formatting of a comment
KVM: doc: Document the life cycle of a VM and its resources
MAINTAINERS: Add KVM selftests to existing KVM entry
Revert "KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()"
KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char()
KVM: PPC: Fix compilation when KVM is not enabled
KVM: Minor cleanups for kvm_main.c
KVM: s390: add debug logging for cpu model subfunctions
KVM: s390: implement subfunction processor calls
arm64: KVM: Fix architecturally invalid reset value for FPEXC32_EL2
KVM: arm/arm64: Remove unused timer variable
KVM: PPC: Book3S: Improve KVM reference counting
KVM: PPC: Book3S HV: Fix build failure without IOMMU support
Revert "KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()"
x86: kvmguest: use TSC clocksource if invariant TSC is exposed
KVM: Never start grow vCPU halt_poll_ns from value below halt_poll_ns_grow_start
KVM: Expose the initial start value in grow_halt_poll_ns() as a module parameter
KVM: grow_halt_poll_ns() should never shrink vCPU halt_poll_ns
KVM: x86/mmu: Consolidate kvm_mmu_zap_all() and kvm_mmu_zap_mmio_sptes()
KVM: x86/mmu: WARN if zapping a MMIO spte results in zapping children
...
|
|
Pull ARM new SoC family support from Arnd Bergmann:
"Two new SoC families are added this time.
Sugaya Taichi submitted support for the Milbeaut SoC family from
Socionext and explains:
"SC2000 is a SoC of the Milbeaut series. equipped with a DSP
optimized for computer vision. It also features advanced
functionalities such as 360-degree, real-time spherical stitching
with multi cameras, image stabilization for without mechanical
gimbals, and rolling shutter correction. More detail is below:
https://www.socionext.com/en/products/assp/milbeaut/SC2000.html"
Interestingly, this one has a history dating back to older chips made
by Socionext and previously Matsushita/Panasonic based on their own
mn10300 CPU architecture that was removed from the kernel last year.
Manivannan Sadhasivam adds support for another SoC family, this is the
Bitmain BM1880 chip used in the Sophon Edge TPU developer board.
The chip is intended for Deep Learning applications, and comes with
dual-core Arm Cortex-A53 to run Linux as well as a RISC-V
microcontroller core to control the tensor unit. For the moment, the
TPU is not accessible in mainline Linux, so we treat it as a generic
Arm SoC.
More information is available at
https://www.sophon.ai/"
* tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: multi_v7_defconfig: add ARCH_MILBEAUT and ARCH_MILBEAUT_M10V
ARM: configs: Add Milbeaut M10V defconfig
ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board
clocksource/drivers/timer-milbeaut: Introduce timer for Milbeaut SoCs
dt-bindings: timer: Add Milbeaut M10V timer description
ARM: milbeaut: Add basic support for Milbeaut m10v SoC
dt-bindings: Add documentation for Milbeaut SoCs
dt-bindings: arm: Add SMP enable-method for Milbeaut
dt-bindings: sram: milbeaut: Add binding for Milbeaut smp-sram
MAINTAINERS: Add entry for Bitmain SoC platform
arm64: dts: bitmain: Add Sophon Egde board support
arm64: dts: bitmain: Add BM1880 SoC support
arm64: Add ARCH_BITMAIN platform
dt-bindings: arm: Document Bitmain BM1880 SoC
|
|
Pull timer and clockevent updates from Thomas Gleixner:
"The time(r) core and clockevent updates are mostly boring this time:
- A new driver for the Tegra210 timer
- Small fixes and improvements alll over the place
- Documentation updates and cleanups"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
soc/tegra: default select TEGRA_TIMER for Tegra210
clocksource/drivers/tegra: Add Tegra210 timer support
dt-bindings: timer: add Tegra210 timer
clocksource/drivers/timer-cs5535: Rename the file for consistency
clocksource/drivers/timer-pxa: Rename the file for consistency
clocksource/drivers/tango-xtal: Rename the file for consistency
dt-bindings: timer: gpt: update binding doc
clocksource/drivers/exynos_mct: Remove unused header includes
dt-bindings: timer: mediatek: update bindings for MT7629 SoC
clocksource/drivers/exynos_mct: Fix error path in timer resources initialization
clocksource/drivers/exynos_mct: Remove dead code
clocksource/drivers/riscv: Add required checks during clock source init
dt-bindings: timer: renesas: tmu: Document r8a774c0 bindings
dt-bindings: timer: renesas, cmt: Document r8a774c0 CMT support
clocksource/drivers/exynos_mct: Clear timer interrupt when shutdown
clocksource/drivers/exynos_mct: Move one-shot check from tick clear to ISR
clocksource/drivers/arch_timer: Workaround for Allwinner A64 timer instability
clocksource/drivers/sun5i: Fail gracefully when clock rate is unavailable
timers: Mark expected switch fall-throughs
timekeeping/debug: No need to check return value of debugfs_create functions
...
|
|
Add timer driver for Milbeaut SoCs series.
The timer has two 32-bit width down counters, one of which is configured
as a clockevent device and the other is configured as a clock source.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add support for the Tegra210 timer that runs at oscillator clock
(TMR10-TMR13). We need these timers to work as clock event device and to
replace the ARMv8 architected timer due to it can't survive across the
power cycle of the CPU core or CPUPORESET signal. So it can't be a wake-up
source when CPU suspends in power down state.
Also convert the original driver to use timer-of API.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
For the sake of consistency, let's rename the file to a name similar
to other file names in this directory.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
For the sake of consistency, let's rename the file to a name similar
to other file names in this directory.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
For the sake of consistency, let's rename the file to a name similar
to other file names in this directory.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The driver does not use sched.h and platform_device.h.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
While freeing interrupt handlers in error path, don't assume that all
requested interrupts are per-processor interrupts and properly release
standard interrupts too.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Fixes: 56a94f13919c ("clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
Linus Torvalds
Olof Johansson
Masahiro Yamada
kbuild test robot
Alexandre Belloni
Sugaya Taichi
Joseph Lo
David Abdurachmanov
Mesih Kilinc
Will Deacon
Marc Zyngier
Patrick Havelange
Linus Walleij
Andrew Murray
Nathan Chancellor
Neil Armstrong
Yangtao Li
Arnd Bergmann
Alexander Shiyan
Atish Patra
YueHaibing
Daniel Lezcano
Krzysztof Kozlowski
Marek Szyprowski