aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/cpufreq (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-01-06Merge branch 'pm-cpufreq'Rafael J. Wysocki2-22/+33
* pm-cpufreq: cpufreq: dt: Add support for APM X-Gene 2 cpufreq: intel_pstate: Always keep all limits settings in sync cpufreq: intel_pstate: Use locking in intel_cpufreq_verify_policy() cpufreq: intel_pstate: Use locking in intel_pstate_resume() cpufreq: intel_pstate: Do not expose PID parameters in passive mode
2017-01-05cpufreq: dt: Add support for APM X-Gene 2Hoan Tran1-0/+2
Add the compatible string for supporting the generic device tree cpufreq-dt driver on APM's X-Gene 2 SoC. Signed-off-by: Hoan Tran <hotran@apm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-31cpufreq: intel_pstate: Always keep all limits settings in syncRafael J. Wysocki1-16/+14
Make intel_pstate update per-logical-CPU limits when the global settings are changed to ensure that they are always in sync and users will not see confusing values in per-logical-CPU sysfs attributes. This also fixes the problem that setting the "no_turbo" global attribute to 1 in the "passive" mode (ie. when intel_pstate acts as a regular cpufreq driver) when scaling_governor is set to "performance" has no effect. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2016-12-31cpufreq: intel_pstate: Use locking in intel_cpufreq_verify_policy()Rafael J. Wysocki1-0/+4
Race conditions are possible if intel_cpufreq_verify_policy() is executed in parallel with global limits updates from sysfs, so the invocation of intel_pstate_update_perf_limits() in it should be carried out under intel_pstate_limits_lock. Make that happen. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2016-12-31cpufreq: intel_pstate: Use locking in intel_pstate_resume()Rafael J. Wysocki1-1/+9
Theoretically, intel_pstate_resume() may be executed in parallel with intel_pstate_set_policy(), if the latter is invoked via cpufreq_update_policy() as a result of a notification, so use intel_pstate_limits_lock in there too to avoid race conditions. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2016-12-27cpufreq: intel_pstate: Do not expose PID parameters in passive modeRafael J. Wysocki1-5/+4
If intel_pstate works in the passive mode in which it acts as a regular cpufreq driver and collaborates with generic cpufreq governors, the PID parameters are not used, so do not expose them via debugfs in that case. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds1-1/+1
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-22Merge branch 'pm-cpufreq'Rafael J. Wysocki2-2/+2
* pm-cpufreq: cpufreq: s3c64xx: remove incorrect __init annotation cpufreq: Remove CPU hotplug callbacks only if they were initialized CPU/hotplug: Clarify description of __cpuhp_setup_state() return value
2016-12-21cpufreq: s3c64xx: remove incorrect __init annotationArnd Bergmann1-1/+1
s3c64xx_cpufreq_config_regulator is incorrectly annotated as __init, since the caller is also not init: WARNING: vmlinux.o(.text+0x92fe1c): Section mismatch in reference from the function s3c64xx_cpufreq_driver_init() to the function .init.text:s3c64xx_cpufreq_config_regulator() With modern gcc versions, the function gets inline, so we don't see the warning, this only happens with gcc-4.6 and older. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-21cpufreq: Remove CPU hotplug callbacks only if they were initializedBoris Ostrovsky1-1/+1
Since CPU hotplug callbacks are requested for CPUHP_AP_ONLINE_DYN state, successful callback initialization will result in cpuhp_setup_state() returning a positive value. Therefore acpi_cpufreq_online being zero indicates that callbacks have not been installed. This means that acpi_cpufreq_boost_exit() should only remove them if acpi_cpufreq_online is positive. Trying to call cpuhp_remove_state_nocalls(0) will cause a BUG(). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-13Merge tag 'pm-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds16-500/+2014
Pull power management updates from Rafael Wysocki: "Again, cpufreq gets more changes than the other parts this time (one new driver, one old driver less, a bunch of enhancements of the existing code, new CPU IDs, fixes, cleanups) There also are some changes in cpuidle (idle injection rework, a couple of new CPU IDs, online/offline rework in intel_idle, fixes and cleanups), in the generic power domains framework (mostly related to supporting power domains containing CPUs), and in the Operating Performance Points (OPP) library (mostly related to supporting devices with multiple voltage regulators) In addition to that, the system sleep state selection interface is modified to make it easier for distributions with unchanged user space to support suspend-to-idle as the default system suspend method, some issues are fixed in the PM core, the latency tolerance PM QoS framework is improved a bit, the Intel RAPL power capping driver is cleaned up and there are some fixes and cleanups in the devfreq subsystem Specifics: - New cpufreq driver for Broadcom STB SoCs and a Device Tree binding for it (Markus Mayer) - Support for ARM Integrator/AP and Integrator/CP in the generic DT cpufreq driver and elimination of the old Integrator cpufreq driver (Linus Walleij) - Support for the zx296718, r8a7743 and r8a7745, Socionext UniPhier, and PXA SoCs in the the generic DT cpufreq driver (Baoyou Xie, Geert Uytterhoeven, Masahiro Yamada, Robert Jarzmik) - cpufreq core fix to eliminate races that may lead to using inactive policy objects and related cleanups (Rafael Wysocki) - cpufreq schedutil governor update to make it use SCHED_FIFO kernel threads (instead of regular workqueues) for doing delayed work (to reduce the response latency in some cases) and related cleanups (Viresh Kumar) - New cpufreq sysfs attribute for resetting statistics (Markus Mayer) - cpufreq governors fixes and cleanups (Chen Yu, Stratos Karafotis, Viresh Kumar) - Support for using generic cpufreq governors in the intel_pstate driver (Rafael Wysocki) - Support for per-logical-CPU P-state limits and the EPP/EPB (Energy Performance Preference/Energy Performance Bias) knobs in the intel_pstate driver (Srinivas Pandruvada) - New CPU ID for Knights Mill in intel_pstate (Piotr Luc) - intel_pstate driver modification to use the P-state selection algorithm based on CPU load on platforms with the system profile in the ACPI tables set to "mobile" (Srinivas Pandruvada) - intel_pstate driver cleanups (Arnd Bergmann, Rafael Wysocki, Srinivas Pandruvada) - cpufreq powernv driver updates including fast switching support (for the schedutil governor), fixes and cleanus (Akshay Adiga, Andrew Donnellan, Denis Kirjanov) - acpi-cpufreq driver rework to switch it over to the new CPU offline/online state machine (Sebastian Andrzej Siewior) - Assorted cleanups in cpufreq drivers (Wei Yongjun, Prashanth Prakash) - Idle injection rework (to make it use the regular idle path instead of a home-grown custom one) and related powerclamp thermal driver updates (Peter Zijlstra, Jacob Pan, Petr Mladek, Sebastian Andrzej Siewior) - New CPU IDs for Atom Z34xx and Knights Mill in intel_idle (Andy Shevchenko, Piotr Luc) - intel_idle driver cleanups and switch over to using the new CPU offline/online state machine (Anna-Maria Gleixner, Sebastian Andrzej Siewior) - cpuidle DT driver update to support suspend-to-idle properly (Sudeep Holla) - cpuidle core cleanups and misc updates (Daniel Lezcano, Pan Bian, Rafael Wysocki) - Preliminary support for power domains including CPUs in the generic power domains (genpd) framework and related DT bindings (Lina Iyer) - Assorted fixes and cleanups in the generic power domains (genpd) framework (Colin Ian King, Dan Carpenter, Geert Uytterhoeven) - Preliminary support for devices with multiple voltage regulators and related fixes and cleanups in the Operating Performance Points (OPP) library (Viresh Kumar, Masahiro Yamada, Stephen Boyd) - System sleep state selection interface rework to make it easier to support suspend-to-idle as the default system suspend method (Rafael Wysocki) - PM core fixes and cleanups, mostly related to the interactions between the system suspend and runtime PM frameworks (Ulf Hansson, Sahitya Tummala, Tony Lindgren) - Latency tolerance PM QoS framework imorovements (Andrew Lutomirski) - New Knights Mill CPU ID for the Intel RAPL power capping driver (Piotr Luc) - Intel RAPL power capping driver fixes, cleanups and switch over to using the new CPU offline/online state machine (Jacob Pan, Thomas Gleixner, Sebastian Andrzej Siewior) - Fixes and cleanups in the exynos-ppmu, exynos-nocp, rk3399_dmc, rockchip-dfi devfreq drivers and the devfreq core (Axel Lin, Chanwoo Choi, Javier Martinez Canillas, MyungJoo Ham, Viresh Kumar) - Fix for false-positive KASAN warnings during resume from ACPI S3 (suspend-to-RAM) on x86 (Josh Poimboeuf) - Memory map verification during resume from hibernation on x86 to ensure a consistent address space layout (Chen Yu) - Wakeup sources debugging enhancement (Xing Wei) - rockchip-io AVS driver cleanup (Shawn Lin)" * tag 'pm-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (127 commits) devfreq: rk3399_dmc: Don't use OPP structures outside of RCU locks devfreq: rk3399_dmc: Remove dangling rcu_read_unlock() devfreq: exynos: Don't use OPP structures outside of RCU locks Documentation: intel_pstate: Document HWP energy/performance hints cpufreq: intel_pstate: Support for energy performance hints with HWP cpufreq: intel_pstate: Add locking around HWP requests PM / sleep: Print active wakeup sources when blocking on wakeup_count reads PM / core: Fix bug in the error handling of async suspend PM / wakeirq: Fix dedicated wakeirq for drivers not using autosuspend PM / Domains: Fix compatible for domain idle state PM / OPP: Don't WARN on multiple calls to dev_pm_opp_set_regulators() PM / OPP: Allow platform specific custom set_opp() callbacks PM / OPP: Separate out _generic_set_opp() PM / OPP: Add infrastructure to manage multiple regulators PM / OPP: Pass struct dev_pm_opp_supply to _set_opp_voltage() PM / OPP: Manage supply's voltage/current in a separate structure PM / OPP: Don't use OPP structure outside of rcu protected section PM / OPP: Reword binding supporting multiple regulators per device PM / OPP: Fix incorrect cpu-supply property in binding cpuidle: Add a kerneldoc comment to cpuidle_use_deepest_state() ..
2016-12-12Merge branch 'pm-cpufreq'Rafael J. Wysocki15-496/+2006
* pm-cpufreq: (51 commits) Documentation: intel_pstate: Document HWP energy/performance hints cpufreq: intel_pstate: Support for energy performance hints with HWP cpufreq: intel_pstate: Add locking around HWP requests cpufreq: ondemand: Set MIN_FREQUENCY_UP_THRESHOLD to 1 cpufreq: intel_pstate: Add Knights Mill CPUID MAINTAINERS: Add bug tracking system location entry for cpufreq cpufreq: dt: Add support for zx296718 cpufreq: acpi-cpufreq: drop rdmsr_on_cpus() usage cpufreq: acpi-cpufreq: Convert to hotplug state machine cpufreq: intel_pstate: fix intel_pstate_exit_perf_limits() prototype cpufreq: intel_pstate: Set EPP/EPB to 0 in performance mode cpufreq: schedutil: Rectify comment in sugov_irq_work() function cpufreq: intel_pstate: increase precision of performance limits cpufreq: intel_pstate: round up min_perf limits cpufreq: Make cpufreq_update_policy() void ACPI / processor: Make acpi_processor_ppc_has_changed() void cpufreq: Avoid using inactive policies cpufreq: intel_pstate: Generic governors support cpufreq: intel_pstate: Request P-states control from SMM if needed cpufreq: dt: Add support for r8a7743 and r8a7745 ...
2016-12-12Merge branch 'pm-opp'Rafael J. Wysocki1-4/+8
* pm-opp: PM / OPP: Don't WARN on multiple calls to dev_pm_opp_set_regulators() PM / OPP: Allow platform specific custom set_opp() callbacks PM / OPP: Separate out _generic_set_opp() PM / OPP: Add infrastructure to manage multiple regulators PM / OPP: Pass struct dev_pm_opp_supply to _set_opp_voltage() PM / OPP: Manage supply's voltage/current in a separate structure PM / OPP: Don't use OPP structure outside of rcu protected section PM / OPP: Reword binding supporting multiple regulators per device PM / OPP: Fix incorrect cpu-supply property in binding PM / OPP: Pass opp_table to dev_pm_opp_put_regulator() PM / OPP: fix debug/error messages in dev_pm_opp_of_get_sharing_cpus() PM / OPP: make _of_get_opp_desc_node() a static function
2016-12-08cpufreq: intel_pstate: Support for energy performance hints with HWPSrinivas Pandruvada1-18/+224
It is possible to provide hints to the HWP algorithms in the processor to be more performance centric to more energy centric. These hints are provided by using HWP energy performance preference (EPP) or energy performance bias (EPB) settings. The scope of these settings is per logical processor, which means that each of the logical processors in the package can be programmed with a different value. This change provides cpufreq sysfs interface to provide hint. For each policy, two additional attributes will be available to check and provide hint. These attributes will only be present when the intel_pstate driver is using HWP mode. These attributes are: - energy_performance_available_preferences - energy_performance_preference To get list of supported hints: $ cat energy_performance_available_preferences default performance balance_performance balance_power power The current preference can be read or changed via cpufreq sysfs attribute "energy_performance_preference". Reading from this attribute will display current effective setting changed via any method. User can write any of the valid preference string to this attribute. User can always restore to power-on default by writing "default". Implementation Since these hints can be provided by direct MSR write or using some tools like x86_energy_perf_policy, the driver internally doesn't maintain any state. The user operation will result in direct read/write of MSR: 0x774 (HWP_REQUEST_MSR). Also driver use read modify write to update other fields in this MSR. Summary of changes: - struct cpudata field epp_saved is renamed to epp_powersave, as this stores the value to restore once policy is switched from performance to powersave to restore original powersave EPP value. - A new struct cpudata field epp_saved is used to store the raw MSR EPP/EPB value when a CPU goes offline or on suspend and restore on online/resume. This ensures that EPP value is restored to correct value irrespective of the means used to set. - EPP/EPB value ranges are fixed for each preference, which can be set for the cpufreq sysfs, so user request is mapped to/from this range. - New attributes are only added when HWP is present. - Since EPP value of 0 is valid the fields are initialized to -EINVAL when not valid. The field epp_default is read only once after powerup to avoid reading on subsequent CPU online operation - New suspend callback to store epp on suspend operation - Don't invalidate old epp_saved field on resume and online as now we can restore last epp value on suspend and this field can still have old EPP value sampled during switch to performance from powersave. - While here optimized setting of cpu_data->epp_powersave = epp in intel_pstate_hwp_set() as this was done in both true and false paths. - epp/epb set function returns error to caller on failure to pass on to user space for display. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-08cpufreq: intel_pstate: Add locking around HWP requestsSrinivas Pandruvada1-12/+12
To avoid race conditions from multiple threads, increase the scope of intel_pstate_limits_lock to include HWP requests also. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-06PM / OPP: Add infrastructure to manage multiple regulatorsViresh Kumar1-3/+3
This patch adds infrastructure to manage multiple regulators and updates the only user (cpufreq-dt) of dev_pm_opp_set{put}_regulator(). This is preparatory work for adding full support for devices with multiple regulators. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01cpufreq: ondemand: Set MIN_FREQUENCY_UP_THRESHOLD to 1Chen Yu1-1/+1
Currently the minimal up_threshold is 11, and user may want to use a smaller minimal up_threshold for performance tuning, so MIN_FREQUENCY_UP_THRESHOLD could be set to 1 because: 1. Current systems wouldn't be affected as they have already a value >= 11. 2. New systems with a default kernel would keep still the default value that is >= 11. Users now have the advantage that they can make their own decisions and customize the 'trip point' to switch to the max frequency. Link: https://bugzilla.kernel.org/show_bug.cgi?id=65501 Signed-off-by: Chen Yu <yu.c.chen@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01cpufreq: intel_pstate: Add Knights Mill CPUIDPiotr Luc1-0/+1
Add Knights Mill (KNM) to the list of CPUIDs supported by intel_pstate. Signed-off-by: Piotr Luc <piotr.luc@intel.com> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-30cpufreq: dt: Add support for zx296718Baoyou Xie1-0/+2
Add the compatible string for supporting the generic cpufreq driver on the ZTE's zx296718 SoC. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-30PM / OPP: Pass opp_table to dev_pm_opp_put_regulator()Stephen Boyd1-4/+8
Joonyoung Shim reported an interesting problem on his ARM octa-core Odoroid-XU3 platform. During system suspend, dev_pm_opp_put_regulator() was failing for a struct device for which dev_pm_opp_set_regulator() is called earlier. This happened because an earlier call to dev_pm_opp_of_cpumask_remove_table() function (from cpufreq-dt.c file) removed all the entries from opp_table->dev_list apart from the last CPU device in the cpumask of CPUs sharing the OPP. But both dev_pm_opp_set_regulator() and dev_pm_opp_put_regulator() routines get CPU device for the first CPU in the cpumask. And so the OPP core failed to find the OPP table for the struct device. This patch attempts to fix this problem by returning a pointer to the opp_table from dev_pm_opp_set_regulator() and using that as the parameter to dev_pm_opp_put_regulator(). This ensures that the dev_pm_opp_put_regulator() doesn't fail to find the opp table. Note that similar design problem also exists with other dev_pm_opp_put_*() APIs, but those aren't used currently by anyone and so we don't need to update them for now. Cc: 4.4+ <stable@vger.kernel.org> # 4.4+ Reported-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> [ Viresh: Wrote commit log and tested on exynos 5250 ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-30sched/x86: Change CONFIG_SCHED_ITMT to CONFIG_SCHED_MC_PRIOTim Chen1-1/+1
Rename CONFIG_SCHED_ITMT for Intel Turbo Boost Max Technology 3.0 to CONFIG_SCHED_MC_PRIO. This makes the configuration extensible in future to other architectures that wish to similarly establish CPU core priorities support in the scheduler. The description in Kconfig is updated to reflect this change with added details for better clarity. The configuration is explicitly default-y, to enable the feature on CPUs that have this feature. It has no effect on non-TBM3 CPUs. Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bp@suse.de Cc: jolsa@redhat.com Cc: linux-acpi@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: rjw@rjwysocki.net Link: http://lkml.kernel.org/r/2b2ee29d93e3f162922d72d0165a1405864fbb23.1480444902.git.tim.c.chen@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-28cpufreq: acpi-cpufreq: drop rdmsr_on_cpus() usageSebastian Andrzej Siewior1-39/+20
The online / pre_down callback is invoked on the target CPU since commit 1cf4f629d9d2 ("cpu/hotplug: Move online calls to hotplugged cpu") which means for the hotplug callback we can use rmdsrl() instead of rdmsr_on_cpus(). This leaves us with set_boost() as the only user which still needs to read/write the MSR on different CPUs. There is no point in doing that update on all cpus with the read modify write magic via per cpu data. We simply can issue a function call on all online CPUs which also means that we need half that many IPIs. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-28cpufreq: acpi-cpufreq: Convert to hotplug state machineSebastian Andrzej Siewior1-47/+45
Install the callbacks via the state machine. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-28cpufreq: intel_pstate: fix intel_pstate_exit_perf_limits() prototypeArnd Bergmann1-2/+2
The addition of the generic governor support marked the intel_pstate_exit_perf_limits as inline(), which fixed a warning, but it introduced another warning: drivers/cpufreq/intel_pstate.c: In function ‘intel_pstate_exit_perf_limits’: drivers/cpufreq/intel_pstate.c:483:1: error: no return statement in function returning non-void [-Werror=return-type] This changes it back to a 'void' return type, and changes the corresponding intel_pstate_init_acpi_perf_limits() function to be inline as well for consistency. Fixes: 001c76f05b01 (cpufreq: intel_pstate: Generic governors support) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-28cpufreq: intel_pstate: Set EPP/EPB to 0 in performance modeSrinivas Pandruvada1-1/+105
When user has selected performance policy, then set the EPP (Energy Performance Preference) or EPB (Energy Performance Bias) to maximum performance mode. Also when user switch back to powersave, then restore EPP/EPB to last EPP/EPB value before entering performance mode. If user has not changed EPP/EPB manually then it will be power on default value. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-24cpufreq/intel_pstate: Use CPPC to get max performanceRafael J. Wysocki2-1/+56
Use the acpi cppc_lib interface to get CPPC performance limits and update the per cpu priority for the ITMT scheduler. If the highest performance of CPUs differs the ITMT feature is enabled. Co-developed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: linux-pm@vger.kernel.org Cc: peterz@infradead.org Cc: jolsa@redhat.com Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: bp@suse.de Link: http://lkml.kernel.org/r/0998b98943bcdec7d1ddd4ff27358da555ea8e92.1479844244.git.tim.c.chen@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-22cpufreq: intel_pstate: increase precision of performance limitsSrinivas Pandruvada1-13/+15
Even with round up of limits->min_perf and limits->max_perf, in some cases resultant performance is 100 MHz less than the desired. For example when the maximum frequency is 3.50 GHz, setting scaling_min_frequency to 2.3 GHz always results in 2.2 GHz minimum. Currently the fixed floating point operation uses 8 bit precision for calculating limits->min_perf and limits->max_perf. For some operations in this driver the 14 bit precision is used. Using the 14 bit precision also for calculating limits->min_perf and limits->max_perf, addresses this issue. Introduced fp_ext_toint() equivalent to fp_toint() and int_ext_tofp() equivalent to int_tofp() with 14 bit precision. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-22cpufreq: intel_pstate: round up min_perf limitsSrinivas Pandruvada1-2/+3
In some use cases, user wants to enforce a minimum performance limit on CPUs. But because of simple division the resultant performance is 100 MHz less than the desired in some cases. For example when the maximum frequency is 3.50 GHz, setting scaling_min_frequency to 1.6 GHz always results in 1.5 GHz minimum. With simple round up, the frequency can be set to 1.6 GHz to minimum in this case. This round up is already done to max_policy_pct and max_perf, so do the same for min_policy_pct and min_perf. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-21cpufreq: Make cpufreq_update_policy() voidRafael J. Wysocki1-14/+7
The return value of cpufreq_update_policy() is never used, so make it void. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2016-11-21cpufreq: Avoid using inactive policiesRafael J. Wysocki1-1/+9
There are two places in the cpufreq core in which low-level driver callbacks may be invoked for an inactive cpufreq policy, which isn't guaranteed to work in general. Both are due to possible races with CPU offline. First, in cpufreq_get(), the policy may become inactive after the check against policy->cpus in cpufreq_cpu_get() and before policy->rwsem is acquired, in which case using it going forward may not be correct. Second, an analogous situation is possible in cpufreq_update_policy(). Avoid using inactive policies by adding policy_is_inactive() checks to the code in the above places. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2016-11-21cpufreq: intel_pstate: Generic governors supportRafael J. Wysocki1-24/+170
There may be reasons to use generic cpufreq governors (eg. schedutil) on Intel platforms instead of the intel_pstate driver's internal governor. However, that currently can only be done by disabling intel_pstate altogether and using the acpi-cpufreq driver instead of it, which is subject to limitations. First of all, acpi-cpufreq only works on systems where the _PSS object is present in the ACPI tables for all logical CPUs. Second, on those systems acpi-cpufreq will only use frequencies listed by _PSS which may be suboptimal. In particular, by convention, the whole turbo range is represented in _PSS as a single P-state and the frequency assigned to it is greater by 1 MHz than the greatest non-turbo frequency listed by _PSS. That may confuse governors to use turbo frequencies less frequently which may lead to suboptimal performance. For this reason, make it possible to use the intel_pstate driver with generic cpufreq governors as a "normal" cpufreq driver. That mode is enforced by adding intel_pstate=passive to the kernel command line and cannot be disabled at run time. In that mode, intel_pstate provides a cpufreq driver interface including the ->target() and ->fast_switch() callbacks and is listed in scaling_driver as "intel_cpufreq". Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Doug Smythies <dsmythies@telus.net>
2016-11-17cpufreq: intel_pstate: Request P-states control from SMM if neededRafael J. Wysocki1-0/+13
Currently, intel_pstate is unable to control P-states on my IvyBridge-based Acer Aspire S5, because they are controlled by SMM on that machine by default and it is necessary to request OS control of P-states from it via the SMI Command register exposed in the ACPI FADT. intel_pstate doesn't do that now, but acpi-cpufreq and other cpufreq drivers for x86 platforms do. Address this problem by making intel_pstate use the ACPI-defined mechanism as well. However, intel_pstate is not modular and it doesn't need the module refcount tricks played by acpi_processor_notify_smm(), so export the core of this function to it as acpi_processor_pstate_control() and make it call that. [The changes in processor_perflib.c related to this should not make any functional difference for the acpi_processor_notify_smm() users]. To be safe, only call acpi_processor_notify_smm() from intel_pstate if ACPI _PPC support is enabled in it. Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2016-11-16cpufreq: dt: Add support for r8a7743 and r8a7745Geert Uytterhoeven1-0/+2
Add the compatible strings for supporting the generic cpufreq driver on the Renesas RZ/G1M (r8a7743) and RZ/G1E (r8a7745) SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-16cpufreq: powernv: Disable preemption while checking CPU throttling stateDenis Kirjanov1-1/+7
With preemption turned on we can read incorrect throttling state while being switched to CPU on a different chip. BUG: using smp_processor_id() in preemptible [00000000] code: cat/7343 caller is .powernv_cpufreq_throttle_check+0x2c/0x710 CPU: 13 PID: 7343 Comm: cat Not tainted 4.8.0-rc5-dirty #1 Call Trace: [c0000007d25b75b0] [c000000000971378] .dump_stack+0xe4/0x150 (unreliable) [c0000007d25b7640] [c0000000005162e4] .check_preemption_disabled+0x134/0x150 [c0000007d25b76e0] [c0000000007b63ac] .powernv_cpufreq_throttle_check+0x2c/0x710 [c0000007d25b7790] [c0000000007b6d18] .powernv_cpufreq_target_index+0x288/0x360 [c0000007d25b7870] [c0000000007acee4] .__cpufreq_driver_target+0x394/0x8c0 [c0000007d25b7920] [c0000000007b22ac] .cpufreq_set+0x7c/0xd0 [c0000007d25b79b0] [c0000000007adf50] .store_scaling_setspeed+0x80/0xc0 [c0000007d25b7a40] [c0000000007ae270] .store+0xa0/0x100 [c0000007d25b7ae0] [c0000000003566e8] .sysfs_kf_write+0x88/0xb0 [c0000007d25b7b70] [c0000000003553b8] .kernfs_fop_write+0x178/0x260 [c0000007d25b7c10] [c0000000002ac3cc] .__vfs_write+0x3c/0x1c0 [c0000007d25b7cf0] [c0000000002ad584] .vfs_write+0xc4/0x230 [c0000007d25b7d90] [c0000000002aeef8] .SyS_write+0x58/0x100 [c0000007d25b7e30] [c00000000000bfec] system_call+0x38/0xfc Fixes: 09a972d16209 (cpufreq: powernv: Report cpu frequency throttling) Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-16cpufreq: conservative: Fix comment explaining frequency updatesStratos Karafotis1-2/+2
The original comment about the frequency increase to maximum is wrong. Both increase and decrease happen at steps. Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-16cpufreq: conservative: Decrease frequency faster for deferred updatesStratos Karafotis3-4/+31
Conservative governor changes the CPU frequency in steps. That means that if a CPU runs at max frequency, it will need several sampling periods to return to min frequency when the workload is finished. If the update function that calculates the load and target frequency is deferred, the governor might need even more time to decrease the frequency. This may have impact to power consumption and after all conservative should decrease the frequency if there is no workload at every sampling rate. To resolve the above issue calculate the number of sampling periods that the update is deferred. Considering that for each sampling period conservative should drop the frequency by a freq_step because the CPU was idle apply the proper subtraction to requested frequency. Below, the kernel trace with and without this patch. First an intensive workload is applied on a specific CPU. Then the workload is removed and the CPU goes to idle. WITHOUT <idle>-0 [007] dN.. 620.329153: cpu_idle: state=4294967295 cpu_id=7 kworker/7:2-556 [007] .... 620.350857: cpu_frequency: state=1700000 cpu_id=7 kworker/7:2-556 [007] .... 620.370856: cpu_frequency: state=1900000 cpu_id=7 kworker/7:2-556 [007] .... 620.390854: cpu_frequency: state=2100000 cpu_id=7 kworker/7:2-556 [007] .... 620.411853: cpu_frequency: state=2200000 cpu_id=7 kworker/7:2-556 [007] .... 620.432854: cpu_frequency: state=2400000 cpu_id=7 kworker/7:2-556 [007] .... 620.453854: cpu_frequency: state=2600000 cpu_id=7 kworker/7:2-556 [007] .... 620.494856: cpu_frequency: state=2900000 cpu_id=7 kworker/7:2-556 [007] .... 620.515856: cpu_frequency: state=3100000 cpu_id=7 kworker/7:2-556 [007] .... 620.536858: cpu_frequency: state=3300000 cpu_id=7 kworker/7:2-556 [007] .... 620.557857: cpu_frequency: state=3401000 cpu_id=7 <idle>-0 [007] d... 669.591363: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] d... 669.591939: cpu_idle: state=4294967295 cpu_id=7 <idle>-0 [007] d... 669.591980: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] dN.. 669.591989: cpu_idle: state=4294967295 cpu_id=7 ... <idle>-0 [007] d... 670.201224: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] d... 670.221975: cpu_idle: state=4294967295 cpu_id=7 kworker/7:2-556 [007] .... 670.222016: cpu_frequency: state=3300000 cpu_id=7 <idle>-0 [007] d... 670.222026: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] d... 670.234964: cpu_idle: state=4294967295 cpu_id=7 ... <idle>-0 [007] d... 670.801251: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] d... 671.236046: cpu_idle: state=4294967295 cpu_id=7 kworker/7:2-556 [007] .... 671.236073: cpu_frequency: state=3100000 cpu_id=7 <idle>-0 [007] d... 671.236112: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] d... 671.393437: cpu_idle: state=4294967295 cpu_id=7 ... <idle>-0 [007] d... 671.401277: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] d... 671.404083: cpu_idle: state=4294967295 cpu_id=7 kworker/7:2-556 [007] .... 671.404111: cpu_frequency: state=2900000 cpu_id=7 <idle>-0 [007] d... 671.404125: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] d... 671.404974: cpu_idle: state=4294967295 cpu_id=7 ... <idle>-0 [007] d... 671.501180: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] d... 671.995414: cpu_idle: state=4294967295 cpu_id=7 kworker/7:2-556 [007] .... 671.995459: cpu_frequency: state=2800000 cpu_id=7 <idle>-0 [007] d... 671.995469: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] d... 671.996287: cpu_idle: state=4294967295 cpu_id=7 ... <idle>-0 [007] d... 672.001305: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] d... 672.078374: cpu_idle: state=4294967295 cpu_id=7 kworker/7:2-556 [007] .... 672.078410: cpu_frequency: state=2600000 cpu_id=7 <idle>-0 [007] d... 672.078419: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] d... 672.158020: cpu_idle: state=4294967295 cpu_id=7 kworker/7:2-556 [007] .... 672.158040: cpu_frequency: state=2400000 cpu_id=7 <idle>-0 [007] d... 672.158044: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] d... 672.160038: cpu_idle: state=4294967295 cpu_id=7 ... <idle>-0 [007] d... 672.234557: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] d... 672.237121: cpu_idle: state=4294967295 cpu_id=7 kworker/7:2-556 [007] .... 672.237174: cpu_frequency: state=2100000 cpu_id=7 <idle>-0 [007] d... 672.237186: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] d... 672.237778: cpu_idle: state=4294967295 cpu_id=7 ... <idle>-0 [007] d... 672.267902: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] d... 672.269860: cpu_idle: state=4294967295 cpu_id=7 kworker/7:2-556 [007] .... 672.269906: cpu_frequency: state=1900000 cpu_id=7 <idle>-0 [007] d... 672.269914: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] d... 672.271902: cpu_idle: state=4294967295 cpu_id=7 ... <idle>-0 [007] d... 672.751342: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] d... 672.823056: cpu_idle: state=4294967295 cpu_id=7 kworker/7:2-556 [007] .... 672.823095: cpu_frequency: state=1600000 cpu_id=7 WITH <idle>-0 [007] dN.. 4380.928009: cpu_idle: state=4294967295 cpu_id=7 kworker/7:2-399 [007] .... 4380.949767: cpu_frequency: state=2000000 cpu_id=7 kworker/7:2-399 [007] .... 4380.969765: cpu_frequency: state=2200000 cpu_id=7 kworker/7:2-399 [007] .... 4381.009766: cpu_frequency: state=2500000 cpu_id=7 kworker/7:2-399 [007] .... 4381.029767: cpu_frequency: state=2600000 cpu_id=7 kworker/7:2-399 [007] .... 4381.049769: cpu_frequency: state=2800000 cpu_id=7 kworker/7:2-399 [007] .... 4381.069769: cpu_frequency: state=3000000 cpu_id=7 kworker/7:2-399 [007] .... 4381.089771: cpu_frequency: state=3100000 cpu_id=7 kworker/7:2-399 [007] .... 4381.109772: cpu_frequency: state=3400000 cpu_id=7 kworker/7:2-399 [007] .... 4381.129773: cpu_frequency: state=3401000 cpu_id=7 <idle>-0 [007] d... 4428.226159: cpu_idle: state=1 cpu_id=7 <idle>-0 [007] d... 4428.226176: cpu_idle: state=4294967295 cpu_id=7 <idle>-0 [007] d... 4428.226181: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] d... 4428.227177: cpu_idle: state=4294967295 cpu_id=7 ... <idle>-0 [007] d... 4428.551640: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] d... 4428.649239: cpu_idle: state=4294967295 cpu_id=7 kworker/7:2-399 [007] .... 4428.649268: cpu_frequency: state=2800000 cpu_id=7 <idle>-0 [007] d... 4428.649278: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] d... 4428.689856: cpu_idle: state=4294967295 cpu_id=7 ... <idle>-0 [007] d... 4428.799542: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] d... 4428.801683: cpu_idle: state=4294967295 cpu_id=7 kworker/7:2-399 [007] .... 4428.801748: cpu_frequency: state=1700000 cpu_id=7 <idle>-0 [007] d... 4428.801761: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] d... 4428.806545: cpu_idle: state=4294967295 cpu_id=7 ... <idle>-0 [007] d... 4429.051880: cpu_idle: state=4 cpu_id=7 <idle>-0 [007] d... 4429.086240: cpu_idle: state=4294967295 cpu_id=7 kworker/7:2-399 [007] .... 4429.086293: cpu_frequency: state=1600000 cpu_id=7 Without the patch the CPU dropped to min frequency after 3.2s With the patch applied the CPU dropped to min frequency after 0.86s Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-14cpufreq: conservative: Rename get_freq_target() to get_freq_step()Viresh Kumar1-11/+11
What's returned from this function is the delta by which the frequency must be increased or decreased and not the final frequency that should be selected. Name it properly to match its purpose. Also update the variables used to store that value. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-14cpufreq: powernv: Fix uninitialized lpstate_idx in gpstates_timer_handler()Akshay Adiga1-0/+1
lpstate_idx remains uninitialized in the case when elapsed_time is greater than MAX_RAMP_DOWN_TIME. At the end of rampdown the global pstate should be equal to the local pstate. Fixes: 20b15b766354 (cpufreq: powernv: Use PMCR to verify global and localpstate) Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Akshay Adiga <akshay.adiga@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-14cpufreq: intel_pstate: Use CPU load based algorithm for PM_MOBILESrinivas Pandruvada1-0/+14
Use get_target_pstate_use_cpu_load() to calculate target P-State for devices, with the preferred power management profile in ACPI FADT set to PM_MOBILE. This may help in resolving some thermal issues caused by low sustained cpu bound workloads. The current algorithm tend to over provision in this case as it doesn't look at the CPU busyness. Also included the fix from Arnd Bergmann <arnd@arndb.de> to solve compile issue, when CONFIG_ACPI is not defined. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-11cpufreq: pxa: use generic platdev driver for device-treeRobert Jarzmik1-0/+2
For device-tree based pxa25x and pxa27x platforms, cpufreq-dt driver is doing the job as well as pxa2xx-cpufreq, so add these platforms to the compatibility list. This won't work for legacy non device-tree platforms where pxa2xx-cpufreq is still required. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-11cpufreq: stats: New sysfs attribute for clearing statisticsMarkus Mayer1-0/+22
Allow CPUfreq statistics to be cleared by writing anything to /sys/.../cpufreq/stats/reset. Signed-off-by: Markus Mayer <mmayer@broadcom.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-11cpufreq: governor: Don't use 'timer' keywordViresh Kumar4-21/+20
The earlier implementation of governors used background timers and so functions, mutex, etc had 'timer' keyword in their names. But that's not true anymore. Replace 'timer' with 'update', as those functions, variables are based around updates to frequency. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-11cpufreq: powernv: Use PMCR to verify global and local pstateAkshay Adiga1-10/+26
As fast_switch() may get called with interrupt disable mode, we cannot hold a mutex to update the global_pstate_info. So currently, fast_switch() does not update the global_pstate_info and it will end up with stale data whenever pstate is updated through fast_switch(). As the gpstate_timer can fire after fast_switch() has updated the pstates, the timer handler cannot rely on the cached values of local and global pstate and needs to read it from the PMCR. Only gpstate_timer_handler() is affected by the stale cached pstate data beacause either fast_switch() or target_index() routines will be called for a given govenor, but gpstate_timer can fire after the governor has changed to schedutil. Signed-off-by: Akshay Adiga <akshay.adiga@linux.vnet.ibm.com> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-11cpufreq: powernv: Adding fast_switch for schedutilAkshay Adiga1-1/+19
Adding fast_switch which does light weight operation to set the desired pstate. Both global and local pstates are set to the same desired pstate. Signed-off-by: Akshay Adiga <akshay.adiga@linux.vnet.ibm.com> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-11cpufreq: brcmstb-avs-cpufreq: make symbol brcm_avs_cpufreq_attr staticWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/cpufreq/brcmstb-avs-cpufreq.c:982:18: warning: symbol 'brcm_avs_cpufreq_attr' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-01cpufreq: intel_pstate: protect limits variableSrinivas Pandruvada1-0/+22
The limits variable gets modified from intel_pstate sysfs and also gets modified from cpufreq sysfs. So protect with a mutex to keep data integrity, when they are getting modified from multiple threads. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-01cpufreq: brcmstb-avs-cpufreq: add debugfs supportMarkus Mayer2-1/+332
In order to aid debugging, we add a debugfs interface to the driver that allows direct interaction with the AVS co-processor. The debugfs interface provides a means for reading all and writing some of the mailbox registers directly from the shell prompt and enables a user to execute the communications protocol between ARM CPU and AVS CPU step-by-step. This interface should be used for debugging purposes only. Signed-off-by: Markus Mayer <mmayer@broadcom.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-01cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCsMarkus Mayer3-0/+748
This driver supports voltage and frequency scaling on Broadcom STB SoCs using AVS firmware with DFS and DVFS support. Actual frequency or voltage scaling is done exclusively by the AVS firmware. The driver merely provides a standard CPUfreq interface to other kernel components and userland, and instructs the AVS firmware to perform frequency or voltage changes on its behalf. Signed-off-by: Markus Mayer <mmayer@broadcom.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-01cpufreq: dt: add Socionext UniPhier SoCs supportMasahiro Yamada1-0/+6
Add compatible strings for Pro5, PXs2, LD6b, LD11, LD20 SoCs to use the generic cpufreq driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-01cpufreq: intel_pstate: Reduce impact due to rounding errorSrinivas Pandruvada1-2/+8
When policy->max and policy->min are same, in some cases they don't result in the same frequency cap. The max_policy_pct is rounded up but not min_perf_pct. So even when they are same, results in different percentage or maximum and minimum. Since minimum is a conservative value for power, a lower value without rounding is better in most of the cases, unless user wants policy->max = policy->min. This change uses use the same policy percentage when policy->max and policy->min are same. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.