aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/crypto (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-02-10Merge tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds7-1/+1015
Pull KVM updates from Radim Krčmář: "ARM: - icache invalidation optimizations, improving VM startup time - support for forwarded level-triggered interrupts, improving performance for timers and passthrough platform devices - a small fix for power-management notifiers, and some cosmetic changes PPC: - add MMIO emulation for vector loads and stores - allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without requiring the complex thread synchronization of older CPU versions - improve the handling of escalation interrupts with the XIVE interrupt controller - support decrement register migration - various cleanups and bugfixes. s390: - Cornelia Huck passed maintainership to Janosch Frank - exitless interrupts for emulated devices - cleanup of cpuflag handling - kvm_stat counter improvements - VSIE improvements - mm cleanup x86: - hypervisor part of SEV - UMIP, RDPID, and MSR_SMI_COUNT emulation - paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit - allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more AVX512 features - show vcpu id in its anonymous inode name - many fixes and cleanups - per-VCPU MSR bitmaps (already merged through x86/pti branch) - stable KVM clock when nesting on Hyper-V (merged through x86/hyperv)" * tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (197 commits) KVM: PPC: Book3S: Add MMIO emulation for VMX instructions KVM: PPC: Book3S HV: Branch inside feature section KVM: PPC: Book3S HV: Make HPT resizing work on POWER9 KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code KVM: PPC: Book3S PR: Fix broken select due to misspelling KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs() KVM: PPC: Book3S PR: Fix svcpu copying with preemption enabled KVM: PPC: Book3S HV: Drop locks before reading guest memory kvm: x86: remove efer_reload entry in kvm_vcpu_stat KVM: x86: AMD Processor Topology Information x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested kvm: embed vcpu id to dentry of vcpu anon inode kvm: Map PFN-type memory regions as writable (if possible) x86/kvm: Make it compile on 32bit and with HYPYERVISOR_GUEST=n KVM: arm/arm64: Fixup userspace irqchip static key optimization KVM: arm/arm64: Fix userspace_irqchip_in_use counting KVM: arm/arm64: Fix incorrect timer_is_pending logic MAINTAINERS: update KVM/s390 maintainers MAINTAINERS: add Halil as additional vfio-ccw maintainer MAINTAINERS: add David as a reviewer for KVM/s390 ...
2018-02-01Merge branch 'x86/hyperv' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipRadim Krčmář5-45/+134
Topic branch for stable KVM clockource under Hyper-V. Thanks to Christoffer Dall for resolving the ARM conflict.
2018-01-31Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds47-907/+3440
Pull crypto updates from Herbert Xu: "API: - Enforce the setting of keys for keyed aead/hash/skcipher algorithms. - Add multibuf speed tests in tcrypt. Algorithms: - Improve performance of sha3-generic. - Add native sha512 support on arm64. - Add v8.2 Crypto Extentions version of sha3/sm3 on arm64. - Avoid hmac nesting by requiring underlying algorithm to be unkeyed. - Add cryptd_max_cpu_qlen module parameter to cryptd. Drivers: - Add support for EIP97 engine in inside-secure. - Add inline IPsec support to chelsio. - Add RevB core support to crypto4xx. - Fix AEAD ICV check in crypto4xx. - Add stm32 crypto driver. - Add support for BCM63xx platforms in bcm2835 and remove bcm63xx. - Add Derived Key Protocol (DKP) support in caam. - Add Samsung Exynos True RNG driver. - Add support for Exynos5250+ SoCs in exynos PRNG driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (166 commits) crypto: picoxcell - Fix error handling in spacc_probe() crypto: arm64/sha512 - fix/improve new v8.2 Crypto Extensions code crypto: arm64/sm3 - new v8.2 Crypto Extensions implementation crypto: arm64/sha3 - new v8.2 Crypto Extensions implementation crypto: testmgr - add new testcases for sha3 crypto: sha3-generic - export init/update/final routines crypto: sha3-generic - simplify code crypto: sha3-generic - rewrite KECCAK transform to help the compiler optimize crypto: sha3-generic - fixes for alignment and big endian operation crypto: aesni - handle zero length dst buffer crypto: artpec6 - remove select on non-existing CRYPTO_SHA384 hwrng: bcm2835 - Remove redundant dev_err call in bcm2835_rng_probe() crypto: stm32 - remove redundant dev_err call in stm32_cryp_probe() crypto: axis - remove unnecessary platform_get_resource() error check crypto: testmgr - test misuse of result in ahash crypto: inside-secure - make function safexcel_try_push_requests static crypto: aes-generic - fix aes-generic regression on powerpc crypto: chelsio - Fix indentation warning crypto: arm64/sha1-ce - get rid of literal pool crypto: arm64/sha2-ce - move the round constant table to .rodata section ...
2018-01-26crypto: picoxcell - Fix error handling in spacc_probe()Alexey Khoroshilov1-10/+17
If clk_get() fails, device_remove_file() looks inappropriate. The error path, where all crypto_register fail, misses resource deallocations. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-26crypto: artpec6 - remove select on non-existing CRYPTO_SHA384Corentin LABBE1-1/+0
Since CRYPTO_SHA384 does not exists, Kconfig should not select it. Anyway, all SHA384 stuff is in CRYPTO_SHA512 which is already selected. Fixes: a21eb94fc4d3i ("crypto: axis - add ARTPEC-6/7 crypto accelerator driver") Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-26crypto: stm32 - remove redundant dev_err call in stm32_cryp_probe()weiyongjun \(A\)1-3/+1
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-26crypto: axis - remove unnecessary platform_get_resource() error checkweiyongjun \(A\)1-3/+0
devm_ioremap_resource() already checks if the resource is NULL, so remove the unnecessary platform_get_resource() error check. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-26crypto: inside-secure - make function safexcel_try_push_requests staticColin Ian King1-2/+2
The function safexcel_try_push_requests is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol 'safexcel_try_push_requests' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> [Antoine: fixed alignment] Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-20crypto: chelsio - Fix indentation warningHarsh Jain1-5/+5
Fix Warning introduced in changeset e1a018e607a3 ("crypto: chelsio - Remove dst sg size zero check") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Harsh Jain <harsh@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-18crypto: chelsio - Remove dst sg size zero checkHarsh Jain1-30/+13
sg_nents_xlen will take care of zero length sg list. Remove Destination sg list size zero check. Signed-off-by: Harsh Jain <harsh@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-18crypto: chelsio - Add authenc versions of ctr and shaHarsh Jain2-23/+199
Add ctr and sha combination of algo in authenc mode. Signed-off-by: Harsh Jain <harsh@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-18crypto: chelsio - Fix IV updated in XTS operationHarsh Jain1-4/+6
Skip decrypt operation on IV received from HW for last request. Signed-off-by: Harsh Jain <harsh@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-18crypto: chelsio - check for sg nullHarsh Jain1-1/+2
Add warning message if sg is NULL after skipping bytes. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Harsh Jain <harsh@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-18crypto: chelsio - Fix IndentationHarsh Jain1-15/+13
Fix inconsistent Indenting. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Harsh Jain <harsh@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-18crypto: marvell/cesa - Fix DMA API misuseRobin Murphy1-7/+12
phys_to_dma() is an internal helper for certain DMA API implementations, and is not appropriate for drivers to use. It appears that what the CESA driver really wants to be using is dma_map_resource() - admittedly that didn't exist when the offending code was first merged, but it does now. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-18crypto: s5p-sss - Add SPDX license identifierKrzysztof Kozlowski1-14/+10
Replace GPL license statement with SPDX GPL-2.0 license identifier. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-18crypto: exynos-rng - Add SPDX license identifier and correct module licenseKrzysztof Kozlowski1-10/+2
Replace GPL license statement with SPDX GPL-2.0 license identifier and correct the module license to GPLv2. The license itself was a generic GPL because of copy-and-paste from old drivers/char/hw_random/exynos-rng.c driver (on which this was based on). However the module license indicated GPL-2.0 or later. GPL-2.0 was intended by author so fix up this mess. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-12crypto: hash - annotate algorithms taking optional keyEric Biggers2-1/+4
We need to consistently enforce that keyed hashes cannot be used without setting the key. To do this we need a reliable way to determine whether a given hash algorithm is keyed or not. AF_ALG currently does this by checking for the presence of a ->setkey() method. However, this is actually slightly broken because the CRC-32 algorithms implement ->setkey() but can also be used without a key. (The CRC-32 "key" is not actually a cryptographic key but rather represents the initial state. If not overridden, then a default initial state is used.) Prepare to fix this by introducing a flag CRYPTO_ALG_OPTIONAL_KEY which indicates that the algorithm has a ->setkey() method, but it is not required to be called. Then set it on all the CRC-32 algorithms. The same also applies to the Adler-32 implementation in Lustre. Also, the cryptd and mcryptd templates have to pass through the flag from their underlying algorithm. Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-12crypto: Use zeroing memory allocator instead of allocator/memsetHimanshu Jha2-9/+6
Use dma_zalloc_coherent for allocating zeroed memory and remove unnecessary memset function. Done using Coccinelle. Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci 0-day tested with no failures. Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-10dma-mapping: move swiotlb arch helpers to a new headerChristoph Hellwig1-0/+1
phys_to_dma, dma_to_phys and dma_capable are helpers published by architecture code for use of swiotlb and xen-swiotlb only. Drivers are not supposed to use these directly, but use the DMA API instead. Move these to a new asm/dma-direct.h helper, included by a linux/dma-direct.h wrapper that provides the default linear mapping unless the architecture wants to override it. In the MIPS case the existing dma-coherent.h is reused for now as untangling it will take a bit of work. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Robin Murphy <robin.murphy@arm.com>
2018-01-05crypto: inside-secure - fix hash when length is a multiple of a blockAntoine Ténart1-10/+24
This patch fixes the hash support in the SafeXcel driver when the update size is a multiple of a block size, and when a final call is made just after with a size of 0. In such cases the driver should cache the last block from the update to avoid handling 0 length data on the final call (that's a hardware limitation). Cc: stable@vger.kernel.org Fixes: 1b44c5a60c13 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver") Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-05crypto: inside-secure - avoid unmapping DMA memory that was not mappedAntoine Ténart1-8/+12
This patch adds a parameter in the SafeXcel ahash request structure to keep track of the number of SG entries mapped. This allows not to call dma_unmap_sg() when dma_map_sg() wasn't called in the first place. This also removes a warning when the debugging of the DMA-API is enabled in the kernel configuration: "DMA-API: device driver tries to free DMA memory it has not allocated". Cc: stable@vger.kernel.org Fixes: 1b44c5a60c13 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver") Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-05crypto: crypto4xx - perform aead icv check in the driverChristian Lamparter2-32/+28
The ccm-aes-ppc4xx now fails one of testmgr's expected failure test cases as such: |decryption failed on test 10 for ccm-aes-ppc4xx: |ret was 0, |expected -EBADMSG It doesn't look like the hardware sets the authentication failure flag. The original vendor source from which this was ported does not have any special code or notes about why this would happen or if there are any WAs. Hence, this patch converts the aead_done callback handler to perform the icv check in the driver. And this fixes the false negative and the ccm-aes-ppc4xx passes the selftests once again. |name : ccm(aes) |driver : ccm-aes-ppc4xx |module : crypto4xx |priority : 300 |refcnt : 1 |selftest : passed |internal : no |type : aead |async : yes |blocksize : 1 |ivsize : 16 |maxauthsize : 16 |geniv : <none> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-05crypto: crypto4xx - kill MODULE_NAMEChristian Lamparter3-4/+2
KBUILD_MODNAME provides the same value. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-05crypto: crypto4xx - fix missing irq devnameChristian Lamparter2-2/+1
crypto4xx_device's name variable is not set to anything. The common devname for request_irq seems to be the module name. This will fix the seemingly anonymous interrupt entry in /proc/interrupts for crypto4xx. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-05crypto: crypto4xx - support Revision B partsChristian Lamparter3-6/+47
This patch adds support for the crypto4xx RevB cores found in the 460EX, 460SX and later cores (like the APM821xx). Without this patch, the crypto4xx driver will not be able to process any offloaded requests and simply hang indefinitely. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-05crypto: crypto4xx - shuffle iomap in front of request_irqChristian Lamparter1-12/+9
It is possible to avoid the ce_base null pointer check in the drivers' interrupt handler routine "crypto4xx_ce_interrupt_handler()" by simply doing the iomap in front of the IRQ registration. This way, the ce_base will always be valid in the handler and a branch in an critical path can be avoided. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-28crypto: stm32 - Use standard CONFIG nameCorentin Labbe2-6/+6
All hardware crypto devices have their CONFIG names using the following convention: CRYPTO_DEV_name_algo This patch apply this conventions on STM32 CONFIG names. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-28crypto: caam - add Derived Key Protocol (DKP) supportHoria Geantă9-171/+384
Offload split key generation in CAAM engine, using DKP. DKP is supported starting with Era 6. Note that the way assoclen is transmitted from the job descriptor to the shared descriptor changes - DPOVRD register is used instead of MATH3 (where available), since DKP protocol thrashes the MATH registers. The replacement of MDHA split key generation with DKP has the side effect of the crypto engine writing the authentication key, and thus the DMA mapping direction for the buffer holding the key has to change from DMA_TO_DEVICE to DMA_BIDIRECTIONAL. There are two cases: -key is inlined in descriptor - descriptor buffer mapping changes -key is referenced - key buffer mapping changes Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-28crypto: caam - save Era in driver's private dataHoria Geantă2-1/+4
Save Era in driver's private data for further usage, like deciding whether an erratum applies or a feature is available based on its value. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-28crypto: caam - remove needless ablkcipher key copyHoria Geantă2-12/+4
ablkcipher shared descriptors are relatively small, thus there is enough space for the key to be inlined. Accordingly, there is no need to copy the key in ctx->key. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-28crypto: caam - constify key dataHoria Geantă2-8/+8
Key data is not modified, it is copied in the shared descriptor. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-22crypto: inside-secure - EIP97 supportAntoine Ténart4-138/+264
The Inside Secure SafeXcel driver was firstly designed to support the EIP197 cryptographic engine which is an evolution (with much more feature, better performances) of the EIP97 cryptographic engine. This patch convert the Inside Secure SafeXcel driver to support both engines (EIP97 + EIP197). The main differences are the register offsets and the context invalidation process which is EIP197 specific. This patch adds an indirection on the register offsets and adds checks not to send any invalidation request when driving the EIP97. A new compatible is added as well to bind the driver from device trees. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-22crypto: inside-secure - retry to proceed the request later on failAntoine Ténart2-9/+29
The dequeueing function was putting back a request in the crypto queue on failure (when not enough resources are available) which is not perfect as the request will be handled much later. This patch updates this logic by keeping a reference on the failed request to try proceeding it later when enough resources are available. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-22crypto: inside-secure - handle more result requests when counter is fullAntoine Ténart2-3/+14
This patch modifies the result handling logic to continue handling results when the completed requests counter is full and not showing the actual number of requests to handle. Suggested-by: Ofer Heifetz <oferh@marvell.com> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-22crypto: inside-secure - acknowledge the result requests all at onceAntoine Ténart1-6/+10
This patches moves the result request acknowledgment from a per request process to acknowledging all the result requests handled at once. Suggested-by: Ofer Heifetz <oferh@marvell.com> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-22crypto: inside-secure - increase the ring sizeAntoine Ténart1-2/+2
Increase the ring size to handle more requests in parallel, while keeping the batch size (for interrupt coalescing) to its previous value. The ring size and batch size are now unlinked. Suggested-by: Ofer Heifetz <oferh@marvell.com> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-22crypto: inside-secure - dequeue all requests at onceAntoine Ténart2-12/+56
This patch updates the dequeueing logic to dequeue all requests at once. Since we can have many requests in the queue, the interrupt coalescing is kept so that the ring interrupt fires every EIP197_MAX_BATCH_SZ at most. To allow dequeueing all requests at once while still using reasonable settings for the interrupt coalescing, the result handling function was updated to setup the threshold interrupt when needed (i.e. when more requests than EIP197_MAX_BATCH_SZ are in the queue). When using this capability the ring is marked as busy so that the dequeue function enqueue new requests without setting the threshold interrupt. Suggested-by: Ofer Heifetz <oferh@marvell.com> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-22crypto: inside-secure - use threaded IRQs for result handlingAntoine Ténart2-20/+22
This patch moves the result handling from an IRQ handler to a threaded IRQ handler, to improve the number of complete requests being handled at once. Suggested-by: Ofer Heifetz <oferh@marvell.com> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-22crypto: inside-secure - move request dequeueing into a workqueueAntoine Ténart4-26/+29
This patch moves the request dequeueing into a workqueue to improve the coalescing of interrupts when sending requests to the engine; as the engine is capable of having one single interrupt for n requests sent. Using a workqueue allows to send more request at once. Suggested-by: Ofer Heifetz <oferh@marvell.com> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-22crypto: inside-secure - remove unused parameter in invalidate_cacheOfer Heifetz4-4/+2
The SafeXcel context isn't used in the cache invalidation function. This cosmetic patch removes it (as well as from the function prototype in the header file and when the function is called). Signed-off-by: Ofer Heifetz <oferh@marvell.com> [Antoine: commit message] Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-22crypto: inside-secure - move cipher crypto mode to request contextOfer Heifetz1-4/+7
The cipher direction can be different for requests within the same transformation context. This patch moves the direction flag from the context to the request scope. Signed-off-by: Ofer Heifetz <oferh@marvell.com> [Antoine: commit message] Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-22crypto: inside-secure - EBUSY is not an error on async requestOfer Heifetz1-1/+1
When initializing the IVs crypto_ahash_update() is called, which at some point will call crypto_enqueue_request(). This function can return -EBUSY when no resource is available and the request is queued. Since this is a valid case, -EBUSY shouldn't be treated as an error. Signed-off-by: Ofer Heifetz <oferh@marvell.com> [Antoine: commit message] Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-22crypto: inside-secure - refrain from unneeded invalidationsOfer Heifetz2-12/+22
The check to know if an invalidation is needed (i.e. when the context changes) is done even if the context does not exist yet. This happens when first setting a key for ciphers and/or hmac operations. This commits adds a check in the _setkey functions to only check if an invalidation is needed when a context exists, as there is no need to perform this check otherwise. Signed-off-by: Ofer Heifetz <oferh@marvell.com> [Antoine: commit message and added a comment and reworked one of the checks] Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-22crypto: inside-secure - comment the caching functionAntoine Ténart1-0/+10
Cosmetic patch adding a few comments to the ahash caching function to understand easily what calculations are made in the functions; and how the function is working. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-22crypto: inside-secure - remove useless memsetAntoine Ténart1-1/+0
This patch removes an useless memset in the ahash_export function, as the zeroed buffer will be entirely overridden the next line. Suggested-by: Ofer Heifetz <oferh@marvell.com> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-22crypto: inside-secure - fix typo in a commentAntoine Ténart1-1/+1
Cosmetic patch fixing one typo in one of the driver's comments. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-22crypto: inside-secure - remove extra empty lineAntoine Ténart1-1/+0
Cosmetic patch removing an extra empty line between header inclusions. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Herbert Xu5-45/+134
Merge the crypto tree to pick up inside-secure fixes.
2017-12-22crypto: exynos - Introduce mutex to prevent concurrent access to hardwareŁukasz Stelmach1-0/+21
Hardware operations like reading random numbers and setting a seed need to be conducted in a single thread. Therefore a mutex is required to prevent multiple threads (processes) from accessing the hardware at the same time. The sequence of mutex_lock() and mutex_unlock() in the exynos_rng_reseed() function enables switching between different threads waiting for the driver to generate random numbers for them. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.