aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/devfreq/devfreq.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-01-02PM / devfreq: Fix potential NULL pointer dereference in governor_storeGustavo A. R. Silva1-1/+2
df->governor is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Notice that df->governor is being null checked at line 1004: if (df->governor) {, which implies it might be null. Fix this by null checking df->governor before dereferencing it. Addresses-Coverity-ID: 1401988 ("Dereference before null check") Fixes: bcf23c79c4e4 ("PM / devfreq: Fix available_governor sysfs") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-01-02PM / devfreq: Propagate error from devfreq_add_device()Bjorn Andersson1-1/+1
Propagate the error of devfreq_add_device() in devm_devfreq_add_device() rather than statically returning ENOMEM. This makes it slightly faster to pinpoint the cause of a returned error. Fixes: 8cd84092d35e ("PM / devfreq: Add resource-managed function for devfreq device") Cc: stable@vger.kernel.org Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-10-26PM / devfreq: Remove unneeded conditional statementChanwoo Choi1-4/+3
The freq_table array of each devfreq device is always not NULL. In result, it is unneeded to check whether profile->freq_table is NULL or not. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-10-26PM / devfreq: Show the all available frequenciesChanwoo Choi1-11/+5
The commit a76caf55e5b35 ("thermal: Add devfreq cooling") allows the devfreq device to use the cooling device. When the cooling down are required, the devfreq_cooling.c disables the OPP entry with the dev_pm_opp_disable(). In result, 'available_frequencies'[1] sysfs node never came to show the all available frequencies. [1] /sys/class/devfreq/.../available_frequencies So, this patch uses the 'freq_table' in the 'struct devfreq_dev_profile' in order to show the all available frequencies. - If 'freq_table' is NULL, devfreq core initializes them by using OPP values. - If 'freq_table' is initialized, devfreq core just uses the 'freq_table'. And this patch adds some comment about the sort way of 'freq_table'. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-10-26PM / devfreq: Change return type of devfreq_set_freq_table()Chanwoo Choi1-9/+9
This patch changes the return type of devfreq_set_freq_table() from 'void' to 'int' in order to check whether it fails or not. And This patch just removes the 'devfreq' prefix and the description of function. Because the helper functions are only used by the devfreq. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-10-26PM / devfreq: Use the available min/max frequencyChanwoo Choi1-8/+32
The commit a76caf55e5b35 ("thermal: Add devfreq cooling") is able to disable OPP as a cooling device. In result, both update_devfreq() and {min|max}_freq_show() have to consider the 'opp->available' status of each OPP. So, this patch adds the 'scaling_{min|max}_freq' to struct devfreq in order to indicate the available mininum and maximum frequency by adjusting OPP interface such as dev_pm_opp_{disable|enable}(). The 'scaling_{min|max}_freq' are used for on both update_devfreq() and {min|max}_freq_show(). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-10-26Revert "PM / devfreq: Add show_one macro to delete the duplicate code"Chanwoo Choi1-9/+11
This reverts commit 3104fa3081126c9bda35793af5f335d0ee0d5818. The {min|max}_freq_show() show the stored value of the struct devfreq. But, if the drivers/thermal/devfreq_cooling.c disables the specific frequency value, {min|max}_freq_show() have to check this situation before showing the stored value. So, this patch revert the macro in order to add the additional codes. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-10-26PM / devfreq: Set min/max_freq when adding the devfreq deviceChanwoo Choi1-0/+42
Prior to that, the min/max_freq of the devfreq device are always zero before the user changes the min/max_freq through sysfs entries. It might make the confusion for the min/max_freq. This patch initializes the available min/max_freq by using the OPP during adding the devfreq device. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-08-28PM / devfreq: Fix memory leak when fail to register deviceChanwoo Choi1-1/+4
When the devfreq_add_device fails to register deivce, the memory leak of devfreq instance happen. So, this patch fix the memory leak issue. Before freeing the devfreq instance checks whether devfreq instance is NULL or not because the device_unregister() frees the devfreq instance when jumping to the 'err_init'. It is to prevent the duplicate the kfee(devfreq). Cc: stable@vger.kernel.org Fixes: ac4b281176a5 ("PM / devfreq: fix duplicated kfree on devfreq pointer") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-02-27scripts/spelling.txt: add "followings" pattern and fix typo instancesMasahiro Yamada1-1/+1
Fix typos and add the following to the scripts/spelling.txt: followings||following While we are here, add a missing colon in the boilerplate in DT binding documents. The "you SoC" in allwinner,sunxi-pinctrl.txt was fixed as well. I reworded "as the followings:" to "as follows:" for drivers/usb/gadget/udc/renesas_usb3.c. Link: http://lkml.kernel.org/r/1481573103-11329-32-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-20Merge branch 'pm-devfreq'Rafael J. Wysocki1-28/+46
* pm-devfreq: PM / devfreq: Modify the device name as devfreq(X) for sysfs PM / devfreq: Simplify the sysfs name of devfreq-event device PM / devfreq: Remove unnecessary separate _remove_devfreq() PM / devfreq: Fix wrong trans_stat of passive devfreq device PM / devfreq: Fix available_governor sysfs PM / devfreq: exynos-ppmu: Show the registred device for ppmu device PM / devfreq: Fix the wrong description for userspace governor PM / devfreq: Fix the checkpatch warnings PM / devfreq: exynos-bus: Print the real clock rate of bus PM / devfreq: exynos-ppmu: Use the regmap interface to handle the registers PM / devfreq: exynos-bus: Add the detailed correlation for Exynos5433 PM / devfreq: Don't delete sysfs group twice
2017-01-31PM / devfreq: Modify the device name as devfreq(X) for sysfsChanwoo Choi1-1/+3
This patch modifies the device name as devfreq(X) for sysfs by using the 'devfreq' prefix word instead of separate device name. On user-space aspect, user would find the some devfreq drvier with 'devfreq(X)' pattern. So, this patch modify the device name as following: - /sys/class/devfreq/[non-standard device name] -> /sys/class/devfreq/devfreq(X) Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31PM / devfreq: Remove unnecessary separate _remove_devfreq()Chanwoo Choi1-16/+7
The _remove_devfreq() releases the all resources of the devfreq device. This function is only called in the devfreq_dev_release(). For that reason, the devfreq core doesn't need to leave the _remove_devfreq() separately. This patch releases the all resources in the devfreq_dev_release() and then removes the _remove_devfreq(). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31PM / devfreq: Fix wrong trans_stat of passive devfreq deviceChanwoo Choi1-1/+2
Until now, the trans_stat information of passive devfreq is not updated. This patch updates the trans_stat information after setting the target frequency of passive devfreq device. Fixes: 996133119f57 ("PM / devfreq: Add new passive governor") Cc: stable@vger.kernel.org Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31PM / devfreq: Fix available_governor sysfsChanwoo Choi1-4/+27
The devfreq using passive governor is not able to change the governor. So, the user can not change the governor through 'available_governor' sysfs entry. Also, the devfreq which don't use the passive governor is not able to change to 'passive' governor on the fly. Fixes: 996133119f57 ("PM / devfreq: Add new passive governor") Cc: stable@vger.kernel.org Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31PM / devfreq: Fix the checkpatch warningsChanwoo Choi1-6/+7
This patch just fixes the checkpatch warnings. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-30PM / OPP: Update OPP users to put referenceViresh Kumar1-10/+4
This patch updates dev_pm_opp_find_freq_*() routines to get a reference to the OPPs returned by them. Also updates the users of dev_pm_opp_find_freq_*() routines to call dev_pm_opp_put() after they are done using the OPPs. As it is guaranteed the that OPPs wouldn't get freed while being used, the RCU read side locking present with the users isn't required anymore. Drop it as well. This patch also updates all users of devfreq_recommended_opp() which was returning an OPP received from the OPP core. Note that some of the OPP core routines have gained rcu_read_{lock|unlock}() calls, as those still use RCU specific APIs within them. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> [Devfreq] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-27PM / OPP: Don't expose srcu_head to register notifiersViresh Kumar1-24/+2
Let the OPP core provide helpers to register notifiers for any device, instead of exposing srcu_head outside of the core. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-03PM / devfreq: Fix the bug of devfreq_add_device when governor is NULLChanwoo Choi1-5/+10
This patch fixes the bug of devfreq_add_device(). The devfreq device must have the default governor. If find_devfreq_governor() returns error, devfreq_add_device() fail to add the devfreq instance. Fixes: 1b5c1be2c88e (PM / devfreq: map devfreq drivers to governor using name) Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17PM / devfreq: correct comment typo.MyungJoo Ham1-1/+1
The function name in the comment was incorrect. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-10-11PM / devfreq: Skip status update on uninitialized previous_freqTobias Jakobi1-0/+4
In case devfreq->previous_freq is still uninitialized in devfreq_update_status(), i.e. it has value '0', the lookups in that function fail, eventually leading to some error message: [ 3.041292] devfreq bus_dmc: Couldn't update frequency transition information. Just skip the statup update in this situation. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-11PM / devfreq: Add proper locking around list_del()Axel Lin1-1/+3
Use devfreq_list_lock around list_del() to prevent list corruption. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-06PM / devfreq: add missing of_node_put after calling of_parse_phandlePeter Chen1-0/+2
of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-07-06PM / devfreq: make devfreq explicitly non-modularPaul Gortmaker1-12/+1
The Kconfig currently controlling compilation of this code is: menuconfig PM_DEVFREQ bool "Generic Dynamic Voltage and Frequency Scaling (DVFS) support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. This code wasn't using module_init, so we don't need to be concerned with altering the initcall level here. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. We don't replace module.h with init.h since the file already has that. But we do add export.h since this file does export some symbols. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-23PM / devfreq: Send the DEVFREQ_POSTCHANGE notification when target() is failedChanwoo Choi1-1/+4
This patch sends the DEVFREQ_POSTCHANGE notification when devfreq->profile->targer() is failed. The PRECHANGE/POSTCHANGE should be paired. Fixes: 0fe3a66410a3 (PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier) Reported-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-22PM / devfreq: fix initialization of current frequency in last statusLukasz Luba1-0/+1
Some systems need current frequency from last_status for calculation but it is zeroed during initialization. When the device starts there is no history, but we can assume that the last frequency was the same as the initial frequency (which is also used in 'previous_freq'). The log shows the result of this misinterpreted value. [ 2.042847] ... Failed to get voltage for frequency 0: -34 Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Reviewed-by: Javi Merino <javi.merino@arm.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22PM / devfreq: remove double put_deviceMyungJoo Ham1-1/+0
When device_register() returns with error, it has already done put_device() on the input device pointer. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22PM / devfreq: fix double call put_deviceCai Zhiyong1-1/+0
1295 */ 1296 void device_unregister(struct device *dev) 1297 { 1298 pr_debug("device: '%s': %s\n", dev_name(dev), __func__); 1299 device_del(dev); 1300 put_device(dev); 1301 } 1302 EXPORT_SYMBOL_GPL(device_unregister); 1303 device_unregister is called put_device, there is no need to call put_device(&devfreq->dev) again. Signed-off-by: Cai Zhiyong <caizhiyong@huawei.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22PM / devfreq: fix duplicated kfree on devfreq pointerMyungJoo Ham1-1/+0
device_unregister() calls kfree already. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22PM / devfreq: devm_kzalloc to have dev pointer more preciselyMyungJoo Ham1-9/+9
devm_kzalloc of devfreq's statistics data structure has been using its parent device as the dev allocated for. If a device's devfreq is disabled in run-time, such allocated memory won't be freed. Desginating more precisely with the devfreq device pointer fixes the issue. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-05-03PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifierChanwoo Choi1-1/+162
This patch adds the new DEVFREQ_TRANSITION_NOTIFIER notifier to send the notification when the frequency of device is changed. This notifier has two state as following: - DEVFREQ_PRECHANGE : Notify it before chaning the frequency of device - DEVFREQ_POSTCHANGE : Notify it after changed the frequency of device And this patch adds the resourced-managed function to release the resource automatically when error happen. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [m.reichl and linux.amoon: Tested it on exynos4412-odroidu3 board] Tested-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-03PM / devfreq: Add devfreq_get_devfreq_by_phandle()Chanwoo Choi1-0/+44
This patch adds the new devfreq_get_devfreq_by_phandle() OF helper function which can find the instance of devfreq device by using phandle ("devfreq"). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> [m.reichl and linux.amoon: Tested it on exynos4412-odroidu3 board] Tested-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-01-13PM / devfreq: Do not show statistics if it's not ready.MyungJoo Ham1-0/+2
Before this patch for a device without statistics support, $ cat trans_stat From : To : time(ms) Total transitions : 0 $ After this patch applied for such a device, $ cat trans_stat Not Supported. $ Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13PM / devfreq: Modify the indentation of trans_stat sysfs for readabilityChanwoo Choi1-5/+5
This patch modifies the indentation of 'trans_stat' sysfs to improve readability. The 1GHz is 1000,000,000. So it needs the least 10 position to show the GHz unit. - Before apply this patch, -sh-3.2# cat trans_stat From : To :50000000100000000133000000200000000400000000 time(ms) *50000000: 0 0 0 0 7 1817635 100000000: 4 0 0 0 4 1590 133000000: 1 4 0 0 7 975 200000000: 2 2 7 0 1 2655 400000000: 0 2 5 12 0 1860 Total transition : 58 - After apply this patch, -sh-3.2# cat trans_stat From : To : 50000000 100000000 133000000 200000000 400000000 time(ms) * 50000000: 0 0 0 0 7 14405 100000000: 4 0 0 0 3 2015 133000000: 2 3 0 0 7 1020 200000000: 1 2 7 0 0 2970 400000000: 0 2 5 10 0 1575 Total transition : 53 Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13PM / devfreq: Set the freq_table of devfreq deviceChanwoo Choi1-2/+48
This patch initialize the freq_table array of each devfreq device by using the devfreq_set_freq_table(). If freq_table is NULL, the devfreq framework is not able to support the frequency transtion information through sysfs. The OPP core uses the integer type for the number of opps in the opp list and uses the 'unsigned long' type for each frequency. So, this patch modifies the type of some variable as following: - the type of freq_table : unsigned int -> unsigned long - the type of max_state : unsigned int -> int - Corrected types, format strings, mutex usages by MyungJoo Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13PM / devfreq: Add show_one macro to delete the duplicate codeChanwoo Choi1-11/+9
This patch adds the 'show_one' macro to simplify the duplicate code of both max_freq_show() and min_freq_show(). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-10-02PM / devfreq: fix double kfreeGeliang Tang1-2/+1
When device_register() fails, kfree(devfreq) is called already in devfreq_dev_release(), hence there is no need to call kfree(devfreq) in err_dev again. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-30PM / devfreq: Fix governor_store()Tobias Jakobi1-1/+3
Writing the currently set governor into sysfs currently seems to fail. Fix this by setting the return code to zero before leaving governor_store(). Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11PM / devfreq: Fix incorrect type issue.Xiaolong Ye1-1/+1
time_in_state in struct devfreq is defined as unsigned long, so devm_kzalloc should use sizeof(unsigned long) as argument instead of sizeof(unsigned int), otherwise it will cause unexpected result in 64bit system. Signed-off-by: Xiaolong Ye <yexl@marvell.com> Signed-off-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11PM / devfreq: drop comment about thermal setting max_freqJavi Merino1-3/+3
The thermal infrastructure should use the devfreq cooling device, which uses the OPP library to disable OPPs as necessary. Fix a couple of typos in the same comment while we are at it. Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11PM / devfreq: Drop unlikely before IS_ERR(_OR_NULL)Viresh Kumar1-2/+2
IS_ERR(_OR_NULL) already contain an 'unlikely' compiler flag and there is no need to do that again from its callers. Drop it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-30PM / devfreq: correct misleading commentMyungJoo Ham1-1/+0
_remove_devfreq() does not have @skip anymore after 3.16. The comment for _remove_devfreq() has been updated correspondingly. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-09-29PM / devfreq: Export helper functions for driversÃrjan Eide1-0/+3
These functions are indended for use by drivers and should be available also when the driver is built as a module. Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ãrjan Eide <orjan.eide@arm.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-05-24PM / devfreq: Add devm_devfreq_{register,unregister}_opp_notfier functionChanwoo Choi1-0/+48
This patch add resource-managed function for devfreq opp as following functions. The devm_devfreq_register_opp_notifier() manages automatically the registration of devfreq opp using device resource management. - devm_devfreq_register_opp_notifier - devm_devfreq_unregister_opp_notifier() Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-05-24PM / devfreq: Add resource-managed function for devfreq deviceChanwoo Choi1-0/+63
This patch add resource-managed function for devfreq device as following functions. The devm_devfreq_add_device() manages automatically the memory of devfreq device using device resource management. - devm_devfreq_add_device() - devm_devfreq_remove_device() Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-05-24PM / devfreq: Fix devfreq_remove_device() to improve the sequence of resource freeChanwoo Choi1-10/+4
This patch modify devfreq_remove_device() to improve the sequence of resource free. If executing existing devfreq_remove_device(), this function always executes _remove_devfreq() twice. In result, second _remove_devfreq() always return error value. So, This patch resolves complicated function sequence as following: [Flow sequence before modification] devfreq_remove_device() _remove_devfreq(devfreq, false) kfree(devfreq); /* Free devfreq */ if (!skip ...) { /* skip is false */ device_unregister(&devfreq->dev) put_device(&devfreq->dev); ... dev->release() devfreq_dev_release() _remove_devfreq(devfreq, true) <- Recall to free devfreq /* * Always return error without freeing resource because * already _remove_devfreq() frees the memory of devfreq. */ } [Flow sequence after modification] devfreq_remove_device device_unregister(&devfreq->dev) put_device(&devfreq->dev); .. dev->release() devfreq_dev_release() _remove_devfreq() kfree(devfreq); /* Free devfreq */ Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Merge conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-03-21PM / devfreq: Rewrite devfreq_update_status() to fix multiple bugsSaravana Kannan1-11/+20
The current devfreq_update_status() has the following bugs: - If previous frequency doesn't have a valid level, it does an out of bounds access into the trans_table and causes memory corruption. - When the new frequency doesn't have a valid level, the time spent in the new frequency is counted towards the next valid frequency switch instead of being ignored. - The time spent on the previous frequency is added to the new frequency's stats instead of the previous frequency's stats. This patch fixes all of this. Signed-off-by: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2013-11-07Merge branch 'pm-devfreq'Rafael J. Wysocki1-2/+2
* pm-devfreq: PM / devfreq: create_freezable_workqueue() doesn't return an ERR_PTR PM / devfreq: Remove duplicate header file inclusion in exynos5_bus.c PM / devfreq: Use devm_* APIs in exynos5_bus.c PM / devfreq: Remove redundant platform_set_drvdata() in exynos5_bus.c PM / devfreq: Fix incorrect usage of IS_ERR_OR_NULL in exynos5_bus.c
2013-10-28PM / devfreq: create_freezable_workqueue() doesn't return an ERR_PTRDan Carpenter1-2/+2
The create_freezable_workqueue() function returns a NULL on error and not an ERR_PTR. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2013-10-25PM / OPP: rename header to linux/pm_opp.hNishanth Menon1-1/+1
Since Operating Performance Points (OPP) functions are specific to device specific power management, be specific and rename opp.h to pm_opp.h Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.