aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/devfreq (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-08-03PM / devfreq: exynos-ppmu: Add the support of PPMUv2 for Exynos5433Chanwoo Choi2-7/+233
This patch adds the support for PPMU (Platform Performance Monitoring Unit) version 2.0 for Exynos5433 SoC. Exynos5433 SoC must need PPMUv2 which is quite different from PPMUv1.1. The exynos-ppmu.c driver supports both PPMUv1.1 and PPMUv2. Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-03-31PM / devfreq: tegra: Register governor on module initTomeu Vizoso1-7/+30
So this driver builds as a module. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-31PM / devfreq: tegra: Enable interrupts after resuming the devfreq monitorTomeu Vizoso1-2/+2
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-31PM / devfreq: tegra: Set drvdata before enabling the irqTomeu Vizoso1-2/+2
To avoid a race in which the interrupt will be handled before the drvdata has been set up. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-31PM / devfreq: tegra: remove operating-pointsTomeu Vizoso1-6/+6
As the DT bindings don't have an operating-points property any more, build the OPP table from the frequencies supported by the EMC clock. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-31PM / devfreq: tegra: Use clock rate constraintsTomeu Vizoso1-10/+5
Now that we have per-user clocks and the possibility to set constraints in a clock, set a floor constraint on the EMC clock. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-31PM / devfreq: tegra: Update to v5 of the submitted patchesTomeu Vizoso1-204/+253
There seemed to be some miscommunication and an old version of the submitted patches was merged. This commit updates the driver to v5, which had this changelog: * Clarify the units of avg_dependency_threshold * Remove unused references to platform_device * Enable and disable interrupts on governor events * Make sure we handle all interrupts for any of the devices we are sampling * Move locking to be per-actmon-device Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> CC: Alex Frid <afrid@nvidia.com> CC: Mikko Perttunen <mikko.perttunen@kapsi.fi> [Added const to device ID by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-30PM / devfreq: correct misleading commentMyungJoo Ham1-1/+0
_remove_devfreq() does not have @skip anymore after 3.16. The comment for _remove_devfreq() has been updated correspondingly. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-30PM / devfreq: event: Add const keyword for devfreq_event_ops structureChanwoo Choi1-1/+1
This patch adds the const keyword for devfreq_event_ops structure because the ops of devfreq_event_desc structure should not be changed after initialization. Cc: Myungjoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-02-13Merge branches 'pm-cpufreq', 'pm-cpuidle', 'pm-devfreq', 'pm-opp' and 'pm-tools'Rafael J. Wysocki1-2/+2
* pm-cpufreq: cpufreq: speedstep-smi: enable interrupts when waiting * pm-cpuidle: intel_idle: support additional Broadwell model * pm-devfreq: PM / devfreq: event: testing the wrong variable * pm-opp: PM / OPP / clk: Remove unnecessary OOM message * pm-tools: tools/power turbostat: support additional Broadwell model tools/power turbostat: update parameters, documentation tools/power turbostat: Skip printing disabled package C-states
2015-02-12PM / devfreq: event: testing the wrong variableDan Carpenter1-2/+2
There is a typo here so we test "edev" but we intended to test "edev[i]". Fixes: f262f28c1470 ('PM / devfreq: event: Add devfreq_event class') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-10Merge tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds8-0/+1723
Pull ACPI and power management updates from Rafael Wysocki: "We have a few new features this time, including a new SFI-based cpufreq driver, a new devfreq driver for Tegra Activity Monitor, a new devfreq class for providing its governors with raw utilization data and a new ACPI driver for AMD SoCs. Still, the majority of changes here are reworks of existing code to make it more straightforward or to prepare it for implementing new features on top of it. The primary example is the rework of ACPI resources handling from Jiang Liu, Thomas Gleixner and Lv Zheng with support for IOAPIC hotplug implemented on top of it, but there is quite a number of changes of this kind in the cpufreq core, ACPICA, ACPI EC driver, ACPI processor driver and the generic power domains core code too. The most active developer is Viresh Kumar with his cpufreq changes. Specifics: - Rework of the core ACPI resources parsing code to fix issues in it and make using resource offsets more convenient and consolidation of some resource-handing code in a couple of places that have grown analagous data structures and code to cover the the same gap in the core (Jiang Liu, Thomas Gleixner, Lv Zheng). - ACPI-based IOAPIC hotplug support on top of the resources handling rework (Jiang Liu, Yinghai Lu). - ACPICA update to upstream release 20150204 including an interrupt handling rework that allows drivers to install raw handlers for ACPI GPEs which then become entirely responsible for the given GPE and the ACPICA core code won't touch it (Lv Zheng, David E Box, Octavian Purdila). - ACPI EC driver rework to fix several concurrency issues and other problems related to events handling on top of the ACPICA's new support for raw GPE handlers (Lv Zheng). - New ACPI driver for AMD SoCs analogous to the LPSS (Low-Power Subsystem) driver for Intel chips (Ken Xue). - Two minor fixes of the ACPI LPSS driver (Heikki Krogerus, Jarkko Nikula). - Two new blacklist entries for machines (Samsung 730U3E/740U3E and 510R) where the native backlight interface doesn't work correctly while the ACPI one does (Hans de Goede). - Rework of the ACPI processor driver's handling of idle states to make the code more straightforward and less bloated overall (Rafael J Wysocki). - Assorted minor fixes related to ACPI and SFI (Andreas Ruprecht, Andy Shevchenko, Hanjun Guo, Jan Beulich, Rafael J Wysocki, Yaowei Bai). - PCI core power management modification to avoid resuming (some) runtime-suspended devices during system suspend if they are in the right states already (Rafael J Wysocki). - New SFI-based cpufreq driver for Intel platforms using SFI (Srinidhi Kasagar). - cpufreq core fixes, cleanups and simplifications (Viresh Kumar, Doug Anderson, Wolfram Sang). - SkyLake CPU support and other updates for the intel_pstate driver (Kristen Carlson Accardi, Srinivas Pandruvada). - cpufreq-dt driver cleanup (Markus Elfring). - Init fix for the ARM big.LITTLE cpuidle driver (Sudeep Holla). - Generic power domains core code fixes and cleanups (Ulf Hansson). - Operating Performance Points (OPP) core code cleanups and kernel documentation update (Nishanth Menon). - New dabugfs interface to make the list of PM QoS constraints available to user space (Nishanth Menon). - New devfreq driver for Tegra Activity Monitor (Tomeu Vizoso). - New devfreq class (devfreq_event) to provide raw utilization data to devfreq governors (Chanwoo Choi). - Assorted minor fixes and cleanups related to power management (Andreas Ruprecht, Krzysztof Kozlowski, Rickard Strandqvist, Pavel Machek, Todd E Brandt, Wonhong Kwon). - turbostat updates (Len Brown) and cpupower Makefile improvement (Sriram Raghunathan)" * tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (151 commits) tools/power turbostat: relax dependency on APERF_MSR tools/power turbostat: relax dependency on invariant TSC Merge branch 'pci/host-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resources tools/power turbostat: decode MSR_*_PERF_LIMIT_REASONS tools/power turbostat: relax dependency on root permission ACPI / video: Add disable_native_backlight quirk for Samsung 510R ACPI / PM: Remove unneeded nested #ifdef USB / PM: Remove unneeded #ifdef and associated dead code intel_pstate: provide option to only use intel_pstate with HWP ACPI / EC: Add GPE reference counting debugging messages ACPI / EC: Add query flushing support ACPI / EC: Refine command storm prevention support ACPI / EC: Add command flushing support. ACPI / EC: Introduce STARTED/STOPPED flags to replace BLOCKED flag ACPI: add AMD ACPI2Platform device support for x86 system ACPI / table: remove duplicate NULL check for the handler of acpi_table_parse() ACPI / EC: Update revision due to raw handler mode. ACPI / EC: Reduce ec_poll() by referencing the last register access timestamp. ACPI / EC: Fix several GPE handling issues by deploying ACPI_GPE_DISPATCH_RAW_HANDLER mode. ACPICA: Events: Enable APIs to allow interrupt/polling adaptive request based GPE handling model ...
2015-01-30devfreq: Fix build break of devfreq-event classChanwoo Choi1-0/+1
This patch fixes the build break of the exynos-ppmu driver because Makefile in drivers/devfreq don't include the entry of devfreq-event.c driver. The original patch[1] includes the entry to build devfreq-event.c without the build break. This build break is generated in the process of merging the patch. [1] https://lkml.org/lkml/2015/1/25/579 - [PATCH v10 1/7] devfreq: event: Add new devfreq_event class to provide basic data for devfreq governor CC init/version.o LD init/built-in.o drivers/built-in.o: In function `exynos_ppmu_probe': binder.c:(.text+0x4447ec): undefined reference to `devm_devfreq_event_add_edev' make: *** [vmlinux] Error 1 Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-01-30PM / devfreq: event: Add devfreq_event classChanwoo Choi7-0/+993
This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-29PM / devfreq: tegra: add devfreq driver for Tegra Activity MonitorTomeu Vizoso3-0/+729
The ACTMON block can monitor several counters, providing averaging and firing interrupts based on watermarking configuration. This implementation monitors the MCALL and MCCPU counters to choose an appropriate frequency for the external memory clock. This patch is based on work by Alex Frid <afrid@nvidia.com> and Mikko Perttunen <mikko.perttunen@kapsi.fi>. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-06rcu: Make SRCU optional by using CONFIG_SRCUPranith Kumar1-0/+1
SRCU is not necessary to be compiled by default in all cases. For tinification efforts not compiling SRCU unless necessary is desirable. The current patch tries to make compiling SRCU optional by introducing a new Kconfig option CONFIG_SRCU which is selected when any of the components making use of SRCU are selected. If we do not select CONFIG_SRCU, srcu.o will not be compiled at all. text data bss dec hex filename 2007 0 0 2007 7d7 kernel/rcu/srcu.o Size of arch/powerpc/boot/zImage changes from text data bss dec hex filename 831552 64180 23944 919676 e087c arch/powerpc/boot/zImage : before 829504 64180 23952 917636 e0084 arch/powerpc/boot/zImage : after so the savings are about ~2000 bytes. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com> CC: Josh Triplett <josh@joshtriplett.org> CC: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: resolve conflict due to removal of arch/ia64/kvm/Kconfig. ]
2014-10-20devfreq: exynos: drop owner assignment from platform_driversWolfram Sang2-2/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-09-29PM / devfreq: exynos: Enable building exynos PPMU as modulePunit Agrawal2-1/+4
Export symbols from the PPMU driver needed to build the exynos bus driver as a module. Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-09-29PM / devfreq: Export helper functions for driversÃrjan Eide1-0/+3
These functions are indended for use by drivers and should be available also when the driver is built as a module. Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ãrjan Eide <orjan.eide@arm.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-09-29PM / devfreq: Remove ARCH_HAS_OPP completelyPaul Bolle1-1/+0
The Kconfig symbol ARCH_HAS_OPP became redundant in v3.16: commit 049d595a4db3 ("PM / OPP: Make OPP invisible to users in Kconfig") removed the only dependency that used it. Setting it had no effect anymore. So commit 78c5e0bb145d ("PM / OPP: Remove ARCH_HAS_OPP") removed it. For some reason that commit did not remove all select statements for that symbol. These statements are now useless. Remove one from devfreq too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-07-23PM / OPP: Remove ARCH_HAS_OPPMark Brown1-1/+0
Since the OPP layer is a kernel library which has been converted to be directly selectable by its callers rather than user selectable and requiring architectures to enable it explicitly the ARCH_HAS_OPP symbol has become redundant and can be removed. Do so. Signed-off-by: Mark Brown <broonie@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-24PM / devfreq: remove checks for CONFIG_EXYNOS_ASVPaul Bolle2-15/+5
Checks for CONFIG_EXYNOS_ASV were added in v3.3. But the related Kconfig symbol has never been added to the tree. Remove these checks, as they always evaluate to false. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> [Merge conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-05-24PM / devfreq: exynos5: Use devm_devfreq_* function using device resource managementChanwoo Choi1-21/+8
This patch uses devm_devfreq_add_device()/devm_devfreq_register_opp_notifier() to control automatically the resource of devfreq. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sachin Kamat <sachin.kamat@linaro.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Manish Badarkhe <badarkhe.manish@gmail.com> Cc: Abhilash Kesavan <a.kesavan@samsung.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-05-24PM / devfreq: exynos4: Use devm_devfreq_* function using device resource managementChanwoo Choi1-15/+4
This patch uses devm_devfreq_add_device()/devm_devfreq_register_opp_notifier() to control automatically the resource of devfreq. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-05-24PM / devfreq: Add devm_devfreq_{register,unregister}_opp_notfier functionChanwoo Choi1-0/+48
This patch add resource-managed function for devfreq opp as following functions. The devm_devfreq_register_opp_notifier() manages automatically the registration of devfreq opp using device resource management. - devm_devfreq_register_opp_notifier - devm_devfreq_unregister_opp_notifier() Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-05-24PM / devfreq: Add resource-managed function for devfreq deviceChanwoo Choi1-0/+63
This patch add resource-managed function for devfreq device as following functions. The devm_devfreq_add_device() manages automatically the memory of devfreq device using device resource management. - devm_devfreq_add_device() - devm_devfreq_remove_device() Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-05-24PM / devfreq: Fix devfreq_remove_device() to improve the sequence of resource freeChanwoo Choi1-10/+4
This patch modify devfreq_remove_device() to improve the sequence of resource free. If executing existing devfreq_remove_device(), this function always executes _remove_devfreq() twice. In result, second _remove_devfreq() always return error value. So, This patch resolves complicated function sequence as following: [Flow sequence before modification] devfreq_remove_device() _remove_devfreq(devfreq, false) kfree(devfreq); /* Free devfreq */ if (!skip ...) { /* skip is false */ device_unregister(&devfreq->dev) put_device(&devfreq->dev); ... dev->release() devfreq_dev_release() _remove_devfreq(devfreq, true) <- Recall to free devfreq /* * Always return error without freeing resource because * already _remove_devfreq() frees the memory of devfreq. */ } [Flow sequence after modification] devfreq_remove_device device_unregister(&devfreq->dev) put_device(&devfreq->dev); .. dev->release() devfreq_dev_release() _remove_devfreq() kfree(devfreq); /* Free devfreq */ Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Merge conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-05-24PM / devfreq: exynos: make more PPMU code commonBartlomiej Zolnierkiewicz4-136/+72
Move common PPMU code from exynos[45]_bus.c to exynos_ppmu.c. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-05-24PM / devfreq: exynos5: introduce struct busfreq_ppmu_dataBartlomiej Zolnierkiewicz1-27/+45
This is a preparation for making more PPMU code common for EXYNOS devfreq drivers. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-05-24PM / devfreq: exynos4: introduce struct busfreq_ppmu_dataBartlomiej Zolnierkiewicz1-28/+46
This is a preparation for making more PPMU code common for EXYNOS devfreq drivers. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-05-24PM / devfreq: exynos4: use common PPMU codeChanwoo Choi2-104/+62
This patch converts exynos4_bus driver to use common PPMU code (exynos_ppmu.c) instead of individual functions related to PPC because PPMU is integrated module with both PPC and Bus event generator. When using PPMU to get bus performance read/write event exynos4_bus driver deson't need to consider memory type. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [bzolnier: splitted out changes from the bigger patch] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-05-24PM / devfreq: exynos5: Add CONFIG_PM_OPP dependency to fix probe failChanwoo Choi1-0/+1
This patch add CONFIG_PM_OPP dependecy to exynos5_bus driver to fix probe fail. If CONFIG_PM_OPP is disabled, dev_pm_opp_find_freq_floor() will always return ERR_PTR(-EINVAL) error. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-05-24PM / devfreq: exynos5: Use SIMPLE_DEV_PM_OPS macroChanwoo Choi1-2/+5
This patch use SIMPLE_DEV_PM_OPS macro instead of legacy method. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-05-24PM / devfreq: exynos4: Add CONFIG_PM_OPP dependency to fix probe failChanwoo Choi1-0/+1
This patch add CONFIG_PM_OPP dependecy to exynos4_bus driver to fix probe fail as following log: [ 3.721389] exynos4-busfreq busfreq.3: Fail to add opp entries. [ 3.721697] exynos4-busfreq: probe of busfreq.3 failed with error -22 If CONFIG_PM_OPP is disabled, dev_pm_opp_find_freq_floor() in xxx_probe() will always return -EINVAL error. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-05-24PM / devfreq: exynos4: Use SIMPLE_DEV_PM_OPS macroChanwoo Choi1-4/+4
This patch use SIMPLE_DEV_PM_OPS macro instead of legacy method. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-05-24PM / devfreq: exynos4: Fix bug of resource leak and code clean on probe()Chanwoo Choi1-12/+23
This patch fix bug about resource leak when happening probe fail and code clean to add debug message. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-03-21PM / devfreq: Rewrite devfreq_update_status() to fix multiple bugsSaravana Kannan1-11/+20
The current devfreq_update_status() has the following bugs: - If previous frequency doesn't have a valid level, it does an out of bounds access into the trans_table and causes memory corruption. - When the new frequency doesn't have a valid level, the time spent in the new frequency is counted towards the next valid frequency switch instead of being ignored. - The time spent on the previous frequency is added to the new frequency's stats instead of the previous frequency's stats. This patch fixes all of this. Signed-off-by: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-01-29Merge branches 'pm-cpufreq' and 'pm-devfreq'Rafael J. Wysocki1-1/+1
* pm-cpufreq: acpi-cpufreq: De-register CPU notifier and free struct msr on error. * pm-devfreq: PM / devfreq: Disable Exynos4 driver build on multiplatform
2014-01-27PM / devfreq: Disable Exynos4 driver build on multiplatformSachin Kamat1-1/+1
Exynos4 devfreq driver uses mach/map.h which is not available on multiplatform. Hence disable build on multiplatform for now. Without this patch we get the following build errors: drivers/devfreq/exynos/exynos4_bus.h:15:22: fatal error: mach/map.h: No such file or directory Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-23Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2-2/+112
Pull ARM SoC cleanups from Olof Johansson: "This is the branch where we usually queue up cleanup efforts, moving drivers out of the architecture directory, header file restructuring, etc. Sometimes they tangle with new development so it's hard to keep it strictly to cleanups. Some of the things included in this branch are: * Atmel SAMA5 conversion to common clock * Reset framework conversion for tegra platforms - Some of this depends on tegra clock driver reworks that are shared with Mike Turquette's clk tree. * Tegra DMA refactoring, which are shared branches with the DMA tree. * Removal of some header files on exynos to prepare for multiplatform" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits) ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h ARM: mvebu: remove prototypes of non-existing functions from common.h ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h serial: sh-sci: Rework baud rate calculation serial: sh-sci: Compute overrun_bit without using baud rate algo serial: sh-sci: Remove unused GPIO request code serial: sh-sci: Move overrun_bit and error_mask fields out of pdata serial: sh-sci: Support resources passed through platform resources serial: sh-sci: Don't check IRQ in verify port operation serial: sh-sci: Set the UPF_FIXED_PORT flag serial: sh-sci: Remove duplicate interrupt check in verify port op serial: sh-sci: Simplify baud rate calculation algorithms serial: sh-sci: Remove baud rate calculation algorithm 5 serial: sh-sci: Sort headers alphabetically ARM: EXYNOS: Kill exynos_pm_late_initcall() ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4 ARM: at91: switch Calao QIL-A9260 board to DT clk: at91: fix pmc_clk_ids data type attriubte PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h> ARM: EXYNOS: remove <mach/regs-clock.h> for exynos ...
2013-12-19treewide: Fix typos in printkMasanari Iida1-1/+1
Correct spelling typo in various part of kernel Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-19Merge branch 'master' into for-nextJiri Kosina3-63/+52
Sync with Linus' tree to be able to apply fixes on top of newer things in tree (efi-stub). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-19PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h>Kukjin Kim1-1/+1
This fixes follwoing warning: In file included from drivers/devfreq/exynos/exynos4_bus.h:15:0, from drivers/devfreq/exynos/exynos4_bus.c:35: arch/arm/mach-exynos/include/mach/map.h:22:0: warning: "S3C_UART_OFFSET" redefined [enabled by default] In file included from drivers/devfreq/exynos/exynos4_bus.c:33:0: arch/arm/plat-samsung/include/plat/map-s5p.h:57:0: note: this is the location of the previous definition Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-19PM / devfreq: move definitions for exynos4_bus into drivers/devfreqKukjin Kim2-2/+112
We don't need to keep the definitions for exynos4_bus into mach-exynos/ so this moves them into drviers/devfreq with adding header file. Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-02PM / devfreq: Fix trivial typo in exynos4_bus.cSachin Kamat1-1/+1
Changed exynox -> Exynos. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-11-07Merge branch 'pm-devfreq'Rafael J. Wysocki2-23/+11
* pm-devfreq: PM / devfreq: create_freezable_workqueue() doesn't return an ERR_PTR PM / devfreq: Remove duplicate header file inclusion in exynos5_bus.c PM / devfreq: Use devm_* APIs in exynos5_bus.c PM / devfreq: Remove redundant platform_set_drvdata() in exynos5_bus.c PM / devfreq: Fix incorrect usage of IS_ERR_OR_NULL in exynos5_bus.c
2013-10-28PM / devfreq: create_freezable_workqueue() doesn't return an ERR_PTRDan Carpenter1-2/+2
The create_freezable_workqueue() function returns a NULL on error and not an ERR_PTR. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2013-10-28PM / devfreq: Remove duplicate header file inclusion in exynos5_bus.cSachin Kamat1-1/+0
linux/opp.h was included twice. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2013-10-28PM / devfreq: Use devm_* APIs in exynos5_bus.cSachin Kamat1-18/+8
devm_* APIs are device managed and make clean up and exit codes simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2013-10-28PM / devfreq: Remove redundant platform_set_drvdata() in exynos5_bus.cSachin Kamat1-2/+0
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.