aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/devfreq (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-08-24PM / devfreq: tegra: Avoid inconsistency of current frequency valueDmitry Osipenko1-2/+4
The frequency value potentially could change in-between. It doesn't cause any real problem at all right now, but that could change in the future. Hence let's avoid the inconsistency. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2019-08-24PM / devfreq: tegra: Clean up driver's probe / removeDmitry Osipenko1-36/+47
Reset hardware, disable ACTMON clock, release OPP's and handle all possible error cases correctly, maintaining the correct tear down order. Also use devm_platform_ioremap_resource() which is now available in the kernel. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2019-08-24PM / devfreq: tegra: Properly disable interruptsDmitry Osipenko1-6/+15
There is no guarantee that interrupt handling isn't running in parallel with tegra_actmon_disable_interrupts(), hence it is necessary to protect DEV_CTRL register accesses and clear IRQ status with ACTMON's IRQ being disabled in the Interrupt Controller in order to ensure that device interrupt is indeed being disabled. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2019-08-24PM / devfreq: tegra: Drop primary interrupt handlerDmitry Osipenko1-37/+18
There is no real need in the primary interrupt handler, hence move everything to the secondary (threaded) handler. In a result locking is consistent now and there are no potential races with the interrupt handler because it is protected with the devfreq's mutex. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2019-08-24PM / devfreq: tegra: Don't set EMC clock rate to maximum on probeDmitry Osipenko1-2/+0
There is no real benefit from doing so, hence let's drop that rate setting for consistency. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2019-08-24PM / devfreq: tegra: Don't ignore clk errorsDmitry Osipenko1-2/+14
The clk_set_min_rate() could fail and in this case clk_set_rate() sets rate to 0, which may drop EMC rate to minimum and make machine very difficult to use. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2019-08-24PM / devfreq: tegra: Replace write memory barrier with the read barrierDmitry Osipenko1-2/+1
The write memory barrier isn't needed because the BUS buffer is flushed by read after write that happens after the removed wmb(), we will also use readl() instead of the relaxed version to ensure that read is indeed completed. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2019-08-24PM / devfreq: tegra: Replace readl-writel with relaxed versionsDmitry Osipenko1-4/+4
There is no need to insert memory barrier on each readl/writel invocation, hence use the relaxed versions. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2019-08-24PM / devfreq: tegra: Fix kHz to Hz conversionDmitry Osipenko1-7/+5
The kHz to Hz is incorrectly converted in a few places in the code, this results in a wrong frequency being calculated because devfreq core uses OPP frequencies that are given in Hz to clamp the rate, while tegra-devfreq gives to the core value in kHz and then it also expects to receive value in kHz from the core. In a result memory freq is always set to a value which is close to ULONG_MAX because of the bug. Hence the EMC frequency is always capped to the maximum and the driver doesn't do anything useful. This patch was tested on Tegra30 and Tegra124 SoC's, EMC frequency scaling works properly now. Cc: <stable@vger.kernel.org> # 4.14+ Tested-by: Steev Klimaszewski <steev@kali.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner13-52/+13
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner2-18/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201Thomas Gleixner1-13/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 228 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner3-0/+3
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16PM / devfreq: add tracing for scheduling workLukasz Luba1-0/+5
This patch add basic tracing of the devfreq workqueue and delayed work. It aims to capture changes of the polling intervals and device state. Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2019-04-16PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters to TF-A.Enric Balletbo i Serra1-1/+70
Trusted Firmware-A (TF-A) for rk3399 implements a SiP call to get the on-die termination (ODT) and auto power down parameters from kernel, this patch adds the functionality to do this. Also, if DDR clock frequency is lower than the on-die termination (ODT) disable frequency this driver should disable the DDR ODT. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Gaël PORTAY <gael.portay@collabora.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2019-04-16PM / devfreq: rockchip-dfi: Move GRF definitions to a common place.Enric Balletbo i Serra1-16/+7
Some rk3399 GRF (Generic Register Files) definitions can be used for different drivers. Move these definitions to a common include so we don't need to duplicate these definitions. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Gaël PORTAY <gael.portay@collabora.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2019-04-16PM / devfreq: exynos-bus: Suspend all devices on system shutdownMarek Szyprowski1-0/+8
Force all Exynos buses to safe operation points before doing the system reboot operation. There are board on which some aggressive power saving operation points are behind the capabilities of the bootloader to properly reset the hardware and boot the board. This way one can avoid board crash early after reboot. This fixes reboot issue on OdroidU3 board both with eMMC and SD boot. Reported-by: Markus Reichl <m.reichl@fivetechno.de> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2019-04-16PM / devfreq: Fix static checker warning in try_then_request_governorEnric Balletbo i Serra1-2/+2
The patch 23c7b54ca1cd: "PM / devfreq: Fix devfreq_add_device() when drivers are built as modules." leads to the following static checker warning: drivers/devfreq/devfreq.c:1043 governor_store() warn: 'governor' can also be NULL The reason is that the try_then_request_governor() function returns both error pointers and NULL. It should just return error pointers, so fix this by returning a ERR_PTR to the error intead of returning NULL. Fixes: 23c7b54ca1cd ("PM / devfreq: Fix devfreq_add_device() when drivers are built as modules.") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2019-04-16PM / devfreq: Restart previous governor if new governor fails to startSaravana Kannan1-2/+14
If the new governor fails to start, switch back to old governor so that the devfreq state is not left in some weird limbo. [Myungjoo: assume fatal on revert failure and set df->governor to NULL] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2019-04-16PM / devfreq: tegra: remove unneeded variableYangtao Li1-5/+2
This variable is not used after initialization, so remove it. And in order to unify the code style, move the location where the dev_get_drvdata is called by the way. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2019-04-16PM / devfreq: rockchip-dfi: remove unneeded semicolonYangtao Li1-1/+1
The semicolon is unneeded, so remove it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2019-04-16PM / devfreq: rk3399_dmc: remove unneeded semicolonYangtao Li1-1/+1
The semicolon is unneeded, so remove it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2019-04-16PM / devfreq: consistent indentationMyungJoo Ham1-25/+24
Following up with complaints on inconsistent indentation from Yangtao Li, this fixes indentation inconsistency. In principle, this tries to put arguments aligned to the left including the first argument except for the case where the first argument is on the far-right side. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Yangtao Li <tiny.windzz@gmail.com>
2019-04-16PM / devfreq: fix missing check of return value in devfreq_add_device()Yangtao Li1-1/+13
devm_kzalloc() could fail, so insert a check of its return value. And if it fails, returns -ENOMEM. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2019-04-16PM / devfreq: fix mem leak in devfreq_add_device()Yangtao Li1-1/+1
'devfreq' is malloced in devfreq_add_device() and should be freed in the error handling cases, otherwise it will cause memory leak. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2019-04-16PM / devfreq: Use of_node_name_eq for node name comparisonsRob Herring2-2/+2
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. For instances using of_node_cmp, this has the side effect of now using case sensitive comparisons. This should not matter for any FDT based system which all of these are. Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: linux-pm@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-12-11PM / devfreq: add devfreq_suspend/resume() functionsLukasz Luba1-0/+44
This patch adds implementation for global suspend/resume for devfreq framework. System suspend will next use these functions. Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Suggested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-12-11PM / devfreq: add support for suspend/resume of a devfreq deviceLukasz Luba1-6/+41
The patch prepares devfreq device for handling suspend/resume functionality. The new fields will store needed information during this process. Devfreq framework handles opp-suspend DT entry and there is no need of modyfications in the drivers code. It uses atomic variables to make sure no race condition affects the process. Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Suggested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-12-11PM / devfreq: refactor set_target frequency functionLukasz Luba1-26/+36
The refactoring is needed for the new client in devfreq: suspend. To avoid code duplication, move it to the new local function devfreq_set_target. Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Suggested-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-10-02PM / devfreq: remove redundant null pointer check before kfreezhong jiang1-2/+1
kfree has taken the null pointer into account. hence it is safe to remove the redundant null pointer check before kfree. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-10-02PM / devfreq: stopping the governor before device_unregister()Vincent Donnefort1-5/+4
device_release() is freeing the resources before calling the device specific release callback which is, in the case of devfreq, stopping the governor. It is a problem as some governors are using the device resources. e.g. simpleondemand which is using the devfreq deferrable monitoring work. If it is not stopped before the resources are freed, it might lead to a use after free. Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com> Reviewed-by: John Einar Reitan <john.reitan@arm.com> [cw00.choi: Fix merge conflict] Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-10-02PM / devfreq: Convert to using %pOFn instead of device_node.nameRob Herring1-2/+2
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-10-02PM / devfreq: Make update_devfreq() publicMatthias Kaehlcke1-3/+0
Currently update_devfreq() is only visible to devfreq governors outside of devfreq.c. Make it public to allow drivers that adjust devfreq policies to cause a re-evaluation of the frequency after a policy change. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-10-02PM / devfreq: Don't adjust to user limits in governorsMatthias Kaehlcke5-26/+12
Several governors use the user space limits df->min/max_freq to adjust the target frequency. This is not necessary, since update_devfreq() already takes care of this. Instead the governor can request the available min/max frequency by setting the target frequency to DEVFREQ_MIN/MAX_FREQ and let update_devfreq() take care of any adjustments. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-10-02PM / devfreq: Fix handling of min/max_freq == 0Matthias Kaehlcke1-12/+30
Commit ab8f58ad72c4 ("PM / devfreq: Set min/max_freq when adding the devfreq device") initializes df->min/max_freq with the min/max OPP when the device is added. Later commit f1d981eaecf8 ("PM / devfreq: Use the available min/max frequency") adds df->scaling_min/max_freq and the following to the frequency adjustment code: max_freq = MIN(devfreq->scaling_max_freq, devfreq->max_freq); With the current handling of min/max_freq this is incorrect: Even though df->max_freq is now initialized to a value != 0 user space can still set it to 0, in this case max_freq would be 0 instead of df->scaling_max_freq as intended. In consequence the frequency adjustment is not performed: if (max_freq && freq > max_freq) { freq = max_freq; To fix this set df->min/max freq to the min/max OPP in max/max_freq_store, when the user passes a value of 0. This also prevents df->max_freq from being set below the min OPP when df->min_freq is 0, and similar for min_freq. Since it is now guaranteed that df->min/max_freq can't be 0 the checks for this case can be removed. Fixes: f1d981eaecf8 ("PM / devfreq: Use the available min/max frequency") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-10-02PM / devfreq: Drop custom MIN/MAX macrosBjorn Andersson1-7/+4
Drop the custom MIN/MAX macros in favour of the standard min/max from kernel.h Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-10-02PM / devfreq: Fix devfreq_add_device() when drivers are built as modules.Enric Balletbo i Serra1-4/+49
When the devfreq driver and the governor driver are built as modules, the call to devfreq_add_device() or governor_store() fails because the governor driver is not loaded at the time the devfreq driver loads. The devfreq driver has a build dependency on the governor but also should have a runtime dependency. We need to make sure that the governor driver is loaded before the devfreq driver. This patch fixes this bug by adding a try_then_request_governor() function. First tries to find the governor, and then, if it is not found, it requests the module and tries again. Fixes: 1b5c1be2c88e (PM / devfreq: map devfreq drivers to governor using name) Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-08-18Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds1-0/+1
Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
2018-07-18PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload.Enric Balletbo i Serra1-4/+27
The opp table is not removed when the driver is unloaded neither when there is an error within probe, so if the driver is reloaded the opp core shows the following warning: rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq: 200000000, volt: 900000, enabled: 1. New: freq: 200000000, volt: 900000, enabled: 1 rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq: 400000000, volt: 900000, enabled: 1. New: freq: 400000000, volt: 900000, enabled: 1 rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq: 666000000, volt: 900000, enabled: 1. New: freq: 666000000, volt: 900000, enabled: 1 rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq: 800000000, volt: 900000, enabled: 1. New: freq: 800000000, volt: 900000, enabled: 1 rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq: 928000000, volt: 900000, enabled: 1. New: freq: 928000000, volt: 900000, enabled: 1 This patch fixes the error path in the probe function and adds a .remove function to properly cleanup the opp table on unloading. Fixes: 5a893e31a636c (PM / devfreq: rockchip: add devfreq driver for rk3399 dmc) Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-07-18PM / devfreq: Init user limits from OPP limits, not viceversaMatthias Kaehlcke1-6/+6
Commit ab8f58ad72c4 ("PM / devfreq: Set min/max_freq when adding the devfreq device") introduced the initialization of the user limits min/max_freq from the lowest/highest available OPPs. Later commit f1d981eaecf8 ("PM / devfreq: Use the available min/max frequency") added scaling_min/max_freq, which actually represent the frequencies of the lowest/highest available OPP. scaling_min/ max_freq are initialized with the values from min/max_freq, which is totally correct in the context, but a bit awkward to read. Swap the initialization and assign scaling_min/max_freq with the OPP freqs and then the user limts min/max_freq with scaling_min/ max_freq. Needless to say that this change is a NOP, intended to improve readability. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-07-18PM / devfreq: rk3399_dmc: fix spelling mistakes.Enric Balletbo i Serra1-6/+6
Fix some spelling mistakes in error and debug messages. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-07-18PM / devfreq: rk3399_dmc: do not print error when get supply and clk defer.Lin Huang1-0/+6
We just return -EPROBE_DEFER error code to caller and do not print error message when try to get center logic regulator and DMC clock defer. Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-07-18PM / devfreq: rk3399_dmc: remove wait for dcf irq event.Enric Balletbo i Serra1-52/+1
We have already wait dcf done in ATF, so don't need wait dcf irq in kernel, besides, clear dcf irq in kernel will import competiton between kernel and ATF, only handle dcf irq in ATF is a better way. Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-07-18PM / devfreq: use put_device() instead of kfree()Arvind Yadav1-1/+3
Never directly free @dev after calling device_register() or device_unregister(), even if device_register() returned an error. Always use put_device() to give up the reference initialized. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-07-18PM / devfreq: exynos-ppmu: Delete an error message for a failed memory allocation in exynos_ppmu_probe()Markus Elfring1-4/+2
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap1-0/+1
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook2-8/+9
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-01-02PM / devfreq: Fix potential NULL pointer dereference in governor_storeGustavo A. R. Silva1-1/+2
df->governor is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Notice that df->governor is being null checked at line 1004: if (df->governor) {, which implies it might be null. Fix this by null checking df->governor before dereferencing it. Addresses-Coverity-ID: 1401988 ("Dereference before null check") Fixes: bcf23c79c4e4 ("PM / devfreq: Fix available_governor sysfs") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-01-02PM / devfreq: Propagate error from devfreq_add_device()Bjorn Andersson1-1/+1
Propagate the error of devfreq_add_device() in devm_devfreq_add_device() rather than statically returning ENOMEM. This makes it slightly faster to pinpoint the cause of a returned error. Fixes: 8cd84092d35e ("PM / devfreq: Add resource-managed function for devfreq device") Cc: stable@vger.kernel.org Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-11-13Merge branches 'pm-devfreq' and 'pm-tools'Rafael J. Wysocki8-47/+109
* pm-devfreq: PM / devfreq: Define the constant governor name PM / devfreq: Remove unneeded conditional statement PM / devfreq: Show the all available frequencies PM / devfreq: Change return type of devfreq_set_freq_table() PM / devfreq: Use the available min/max frequency Revert "PM / devfreq: Add show_one macro to delete the duplicate code" PM / devfreq: Set min/max_freq when adding the devfreq device * pm-tools: tools/power/cpupower: add libcpupower.so.0.0.1 to .gitignore tools/power/cpupower: Add 64 bit library detection MAINTAINERS: add maintainer for tools/power/cpupower cpupower: Fix no-rounding MHz frequency output
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.