aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/dma-buf/dma-buf.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-10-24dma-buf: stop using the dmabuf->lock so much v2Christian König1-16/+2
The attachment list is now protected by the dma_resv object. Stop holding the dma_buf->lock while calling ->attach/->detach, this allows for concurrent attach/detach operations. v2: cleanup commit message and locking in _debug_show() Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/336790
2019-10-24dma-buf: change DMA-buf locking convention v3Christian König1-17/+101
This patch is a stripped down version of the locking changes necessary to support dynamic DMA-buf handling. It adds a dynamic flag for both importers as well as exporters so that drivers can choose if they want the reservation object locked or unlocked during mapping of attachments. For compatibility between drivers we cache the DMA-buf mapping during attaching an importer as soon as exporter/importer disagree on the dynamic handling. Issues and solutions we considered: - We can't change all existing drivers, and existing improters have strong opinions about which locks they're holding while calling dma_buf_attachment_map/unmap. Exporters also have strong opinions about which locks they can acquire in their ->map/unmap callbacks, levaing no room for change. The solution to avoid this was to move the actual map/unmap out from this call, into the attach/detach callbacks, and cache the mapping. This works because drivers don't call attach/detach from deep within their code callchains (like deep in memory management code called from cs/execbuf ioctl), but directly from the fd2handle implementation. - The caching has some troubles on some soc drivers, which set other modes than DMA_BIDIRECTIONAL. We can't have 2 incompatible mappings, and we can't re-create the mapping at _map time due to the above locking fun. We very carefuly step around that by only caching at attach time if the dynamic mode between importer/expoert mismatches. - There's been quite some discussion on dma-buf mappings which need active cache management, which would all break down when caching, plus we don't have explicit flush operations on the attachment side. The solution to this was to shrug and keep the current discrepancy between what the dma-buf docs claim and what implementations do, with the hope that the begin/end_cpu_access hooks are good enough and that all necessary flushing to keep device mappings consistent will be done there. v2: cleanup set_name merge, improve kerneldoc v3: update commit message, kerneldoc and cleanup _debug_show() Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/336788/
2019-08-16dma-buf: Restore seqlock around dma_resv updatesChris Wilson1-5/+26
This reverts 67c97fb79a7f ("dma-buf: add reservation_object_fences helper") dd7a7d1ff2f1 ("drm/i915: use new reservation_object_fences helper") 0e1d8083bddb ("dma-buf: further relax reservation_object_add_shared_fence") 5d344f58da76 ("dma-buf: nuke reservation_object seq number") The scenario that defeats simply grabbing a set of shared/exclusive fences and using them blissfully under RCU is that any of those fences may be reallocated by a SLAB_TYPESAFE_BY_RCU fence slab cache. In this scenario, while keeping the rcu_read_lock we need to establish that no fence was changed in the dma_resv after a read (or full) memory barrier. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190814182401.25009-1-chris@chris-wilson.co.uk
2019-08-13dma-buf: rename reservation_object to dma_resvChristian König1-16/+16
Be more consistent with the naming of the other DMA-buf objects. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/323401/
2019-08-10dma-buf: add reservation_object_fences helperChristian König1-26/+5
Add a new helper to get a consistent set of pointers from the reservation object. While at it group all access helpers together in the header file. v2: correctly return shared_count as well Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/322378/?series=64837&rev=1
2019-07-19Merge branch 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-5/+10
Pull vfs mount updates from Al Viro: "The first part of mount updates. Convert filesystems to use the new mount API" * 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) mnt_init(): call shmem_init() unconditionally constify ksys_mount() string arguments don't bother with registering rootfs init_rootfs(): don't bother with init_ramfs_fs() vfs: Convert smackfs to use the new mount API vfs: Convert selinuxfs to use the new mount API vfs: Convert securityfs to use the new mount API vfs: Convert apparmorfs to use the new mount API vfs: Convert openpromfs to use the new mount API vfs: Convert xenfs to use the new mount API vfs: Convert gadgetfs to use the new mount API vfs: Convert oprofilefs to use the new mount API vfs: Convert ibmasmfs to use the new mount API vfs: Convert qib_fs/ipathfs to use the new mount API vfs: Convert efivarfs to use the new mount API vfs: Convert configfs to use the new mount API vfs: Convert binfmt_misc to use the new mount API convenience helper: get_tree_single() convenience helper get_tree_nodev() vfs: Kill sget_userns() ...
2019-07-15Merge tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-10/+166
Pull drm updates from Dave Airlie: "The biggest thing in this is the AMD Navi GPU support, this again contains a bunch of header files that are large. These are the new AMD RX5700 GPUs that just recently became available. New drivers: - ST-Ericsson MCDE driver - Ingenic JZ47xx SoC UAPI change: - HDR source metadata property Core: - HDR inforframes and EDID parsing - drm hdmi infoframe unpacking - remove prime sg_table caching into dma-buf - New gem vram helpers to reduce driver code - Lots of drmP.h removal - reservation fencing fix - documentation updates - drm_fb_helper_connector removed - mode name command handler rewrite fbcon: - Remove the fbcon notifiers ttm: - forward progress fixes dma-buf: - make mmap call optional - debugfs refcount fixes - dma-fence free with pending signals fix - each dma-buf gets an inode Panels: - Lots of additional panel bindings amdgpu: - initial navi10 support - avoid hw reset - HDR metadata support - new thermal sensors for vega asics - RAS fixes - use HMM rather than MMU notifier - xgmi topology via kfd - SR-IOV fixes - driver reload fixes - DC use a core bpc attribute - Aux fixes for DC - Bandwidth calc updates for DC - Clock handling refactor - kfd VEGAM support vmwgfx: - Coherent memory support changes i915: - HDR Support - HDMI i2c link - Icelake multi-segmented gamma support - GuC firmware update - Mule Creek Canyon PCH support for EHL - EHL platform updtes - move i915.alpha_support to i915.force_probe - runtime PM refactoring - VBT parsing refactoring - DSI fixes - struct mutex dependency reduction - GEM code reorg mali-dp: - Komeda driver features msm: - dsi vs EPROBE_DEFER fixes - msm8998 snapdragon 835 support - a540 gpu support - mdp5 and dpu interconnect support exynos: - drmP.h removal tegra: - misc fixes tda998x: - audio support improvements - pixel repeated mode support - quantisation range handling corrections - HDMI vendor info fix armada: - interlace support fix - overlay/video plane register handling refactor - add gamma support rockchip: - RX3328 support panfrost: - expose perf counters via hidden ioctls vkms: - enumerate CRC sources list ast: - rework BO handling mgag200: - rework BO handling dw-hdmi: - suspend/resume support rcar-du: - R8A774A1 Soc Support - LVDS dual-link mode support - Additional formats - Misc fixes omapdrm: - DSI command mode display support stm - fb modifier support - runtime PM support sun4i: - use vmap ops vc4: - binner bo binding rework v3d: - compute shader support - resync/sync fixes - job management refactoring lima: - NULL pointer in irq handler fix - scheduler default timeout virtio: - fence seqno support - trace events bochs: - misc fixes tc458767: - IRQ/HDP handling sii902x: - HDMI audio support atmel-hlcdc: - misc fixes meson: - zpos support" * tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits) Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next" Revert "mm: adjust apply_to_pfn_range interface for dropped token." mm: adjust apply_to_pfn_range interface for dropped token. drm/amdgpu/navi10: add uclk activity sensor drm/amdgpu: properly guard the generic discovery code drm/amdgpu: add missing documentation on new module parameters drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback drm/amd/display: avoid 64-bit division drm/amdgpu/psp11: simplify the ucode register logic drm/amdgpu: properly guard DC support in navi code drm/amd/powerplay: vega20: fix uninitialized variable use drm/amd/display: dcn20: include linux/delay.h amdgpu: make pmu support optional drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq drm/amd/powerplay: Use memset to initialize metrics structs drm/amdgpu/mes10.1: Fix header guard drm/amd/powerplay: add temperature sensor support for navi10 drm/amdgpu: fix scheduler timeout calc drm/amdgpu: Prepare for hmm_range_register API change (v2) ...
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner1-12/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-14dma-buf: add show_fdinfo handlerGreg Hackmann1-0/+15
The show_fdinfo handler exports the same information available through debugfs on a per-buffer basis. Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Chenbo Feng <fengc@google.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190613223408.139221-4-fengc@google.com
2019-06-14dma-buf: add DMA_BUF_SET_NAME ioctlsGreg Hackmann1-3/+62
This patch adds complimentary DMA_BUF_SET_NAME ioctls, which lets userspace processes attach a free-form name to each buffer. This information can be extremely helpful for tracking and accounting shared buffers. For example, on Android, we know what each buffer will be used for at allocation time: GL, multimedia, camera, etc. The userspace allocator can use DMA_BUF_SET_NAME to associate that information with the buffer, so we can later give developers a breakdown of how much memory they're allocating for graphics, camera, etc. Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Chenbo Feng <fengc@google.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190613223408.139221-3-fengc@google.com
2019-06-14dma-buf: give each buffer a full-fledged inodeGreg Hackmann1-6/+57
By traversing /proc/*/fd and /proc/*/map_files, processes with CAP_ADMIN can get a lot of fine-grained data about how shmem buffers are shared among processes. stat(2) on each entry gives the caller a unique ID (st_ino), the buffer's size (st_size), and even the number of pages currently charged to the buffer (st_blocks / 512). In contrast, all dma-bufs share the same anonymous inode. So while we can count how many dma-buf fds or mappings a process has, we can't get the size of the backing buffers or tell if two entries point to the same dma-buf. On systems with debugfs, we can get a per-buffer breakdown of size and reference count, but can't tell which processes are actually holding the references to each buffer. Replace the singleton inode with full-fledged inodes allocated by alloc_anon_inode(). This involves creating and mounting a mini-pseudo-filesystem for dma-buf, following the example in fs/aio.c. Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Chenbo Feng <fengc@google.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190613223408.139221-2-fengc@google.com
2019-05-22dma-buf: start caching of sg_table objects v2Christian König1-2/+25
To allow a smooth transition from pinning buffer objects to dynamic invalidation we first start to cache the sg_table for an attachment. v2: keep closer to the DRM implementation Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.kernel.org/patch/10943053/
2019-04-24dma-buf: Make mmap callback actually optionalAndrew F. Davis1-2/+9
The docs state the callback is optional but it is not, make it optional. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190329165201.16233-1-afd@ti.com
2019-04-24dma-buf: balance refcount inbalanceJérôme Glisse1-0/+1
The debugfs take reference on fence without dropping them. Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: stable@vger.kernel.org Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181206161840.6578-1-jglisse@redhat.com
2018-12-24dma-buf: Change to use DEFINE_SHOW_ATTRIBUTE macroYangtao Li1-11/+1
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181130161101.3413-1-tiny.windzz@gmail.com
2018-08-10dma-buf: Remove requirement for ops->map() from dma_buf_exportChris Wilson1-1/+0
Since commit 9ea0dfbf972 ("dma-buf: make map_atomic and map function pointers optional"), the core provides the no-op functions when map and map_atomic are not provided, so we no longer need assert that are supplied by a dma-buf exporter. Fixes: 09ea0dfbf972 ("dma-buf: make map_atomic and map function pointers optional") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180807183647.22626-1-chris@chris-wilson.co.uk Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-20dma-buf: remove kmap_atomic interfaceChristian König1-52/+2
Neither used nor correctly implemented anywhere. Just completely remove the interface. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/226645/
2018-06-20dma_buf: remove device parameter from attach callback v2Christian König1-1/+1
The device parameter is completely unused because it is available in the attachment structure as well. v2: fix kerneldoc as well Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/226643/
2018-06-01dma-buf: make map_atomic and map function pointers optionalGerd Hoffmann1-0/+4
So drivers don't need dummy functions just returning NULL. Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180529135918.19729-1-kraxel@redhat.com
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-13/+13
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01Merge tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-5/+4
Pull drm updates from Dave Airlie: "This seems to have been a comparatively quieter merge window, I assume due to holidays etc. The "biggest" change is AMD header cleanups, which merge/remove a bunch of them. The AMD gpu scheduler is now being made generic with the etnaviv driver wanting to reuse the code, hopefully other drivers can go in the same direction. Otherwise it's the usual lots of stuff in i915/amdgpu, not so much stuff elsewhere. Core: - Add .last_close and .output_poll_changed helpers to reduce driver footprints - Fix plane clipping - Improved debug printing support - Add panel orientation property - Update edid derived properties at edid setting - Reduction in fbdev driver footprint - Move amdgpu scheduler into core for other drivers to use. i915: - Selftest and IGT improvements - Fast boot prep work on IPS, pipe config - HW workarounds for Cannonlake, Geminilake - Cannonlake clock and HDMI2.0 fixes - GPU cache invalidation and context switch improvements - Display planes cleanup - New PMU interface for perf queries - New firmware support for KBL/SKL - Geminilake HW workaround for perforamce - Coffeelake stolen memory improvements - GPU reset robustness work - Cannonlake horizontal plane flipping - GVT work amdgpu/radeon: - RV and Vega header file cleanups (lots of lines gone!) - TTM operation context support - 48-bit GPUVM support for Vega/RV - ECC support for Vega - Resizeable BAR support - Multi-display sync support - Enable swapout for reserved BOs during allocation - S3 fixes on Raven - GPU reset cleanup and fixes - 2+1 level GPU page table amdkfd: - GFX7/8 SDMA user queues support - Hardware scheduling for multiple processes - dGPU prep work rcar: - Added R8A7743/5 support - System suspend/resume support sun4i: - Multi-plane support for YUV formats - A83T and LVDS support msm: - Devfreq support for GPU tegra: - Prep work for adding Tegra186 support - Tegra186 HDMI support - HDMI2.0 and zpos support by using generic helpers tilcdc: - Misc fixes omapdrm: - Support memory bandwidth limits - DSI command mode panel cleanups - DMM error handling exynos: - drop the old IPP subdriver. etnaviv: - Occlusion query fixes - Job handling fixes - Prep work for hooking in gpu scheduler armada: - Move closer to atomic modesetting - Allow disabling primary plane if overlay is full screen imx: - Format modifier support - Add tile prefetch to PRE - Runtime PM support for PRG ast: - fix LUT loading" * tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux: (1471 commits) drm/ast: Load lut in crtc_commit drm: Check for lessee in DROP_MASTER ioctl drm: fix gpu scheduler link order drm/amd/display: Demote error print to debug print when ATOM impl missing dma-buf: fix reservation_object_wait_timeout_rcu once more v2 drm/amdgpu: Avoid leaking PM domain on driver unbind (v2) drm/amd/amdgpu: Add Polaris version check drm/amdgpu: Reenable manual GPU reset from sysfs drm/amdgpu: disable MMHUB power gating on raven drm/ttm: Don't unreserve swapped BOs that were previously reserved drm/ttm: Don't add swapped BOs to swap-LRU list drm/amdgpu: only check for ECC on Vega10 drm/amd/powerplay: Fix smu_table_entry.handle type drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig drm/radeon: fill in rb backend map on evergreen/ni. drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2) drm/ttm: only free pages rather than update global memory count together drm/amdgpu: fix CPU based VM updates drm/amdgpu: fix typo in amdgpu_vce_validate_bo ...
2017-11-28the rest of drivers/*: annotate ->poll() instancesAl Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-27annotate poll_table_struct ->_keyAl Viro1-1/+1
Only POLL... bitmaps ever end up there and their only use is checking for POLL... bits in them. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-23dma-buf: Fix ifnullfree.cocci warningsVasyl Gomonovych1-2/+1
NULL check before some freeing functions is not needed. drivers/dma-buf/dma-buf.c:1183:2-26: WARNING: NULL check before freeing debugfs_remove_recursive Generated by: scripts/coccinelle/free/ifnullfree.cocci Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1511364161-6074-1-git-send-email-gomonovych@gmail.com
2017-11-02dma-buf: Cleanup comments on dma_buf_map_attachment()Liviu Dudau1-3/+3
Mappings need to be unmapped by calling dma_buf_unmap_attachment() and not by calling again dma_buf_map_attachment(). Also fix some spelling mistakes. Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171101140630.2884-1-Liviu.Dudau@arm.com
2017-09-20dma-buf: remove redundant initialization of sg_tableColin Ian King1-1/+1
sg_table is being initialized and is never read before it is updated again later on, hence making the initialization redundant. Remove the initialization. Detected by clang scan-build: "warning: Value stored to 'sg_table' during its initialization is never read" Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170914230516.6056-1-colin.king@canonical.com
2017-05-08dma-buf: Adjust a null pointer check in dma_buf_attach()Markus Elfring1-1/+1
The script "checkpatch.pl" pointed information out like the following. Comparison to NULL could be written "!attach" Thus adjust this expression. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2017-05-08dma-buf: Improve a size determination in dma_buf_attach()Markus Elfring1-1/+1
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2017-05-08dma-buf: Combine two function calls into one in dma_buf_debug_show()Markus Elfring1-3/+1
A bit of data was put into a sequence by two separate function calls. Print the same data by a single function call instead. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2017-04-20dma-buf: Rename dma-ops to prevent conflict with kunmap_atomic macroLogan Gunthorpe1-8/+8
Seeing the kunmap_atomic dma_buf_ops share the same name with a macro in highmem.h, the former can be aliased if any dma-buf user includes that header. I'm personally trying to include highmem.h inside scatterlist.h and this breaks the dma-buf code proper. Christoph Hellwig suggested [1] renaming it and pushing this patch ASAP. To maintain consistency I've renamed all four of kmap* and kunmap* to be map* and unmap*. (Even though only kmap_atomic presently conflicts.) [1] https://www.spinics.net/lists/target-devel/msg15070.html Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/1492630570-879-1-git-send-email-logang@deltatee.com
2017-04-03dma-buf: align debugfs outputRussell King1-1/+2
Align the heading with the values output from debugfs. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/E1cttOq-0006GX-U7@rmk-PC.armlinux.org.uk
2017-03-31dma-buf: fence debuggingRussell King1-1/+33
Add debugfs output to report shared and exclusive fences on a dma_buf object. This produces output such as: Dma-buf Objects: size flags mode count exp_name 08294400 00000000 00000005 00000005 drm Exclusive fence: etnaviv 134000.gpu signalled Attached Devices: gpu-subsystem Total 1 devices attached Total 1 objects, 8294400 bytes Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/E1cttMI-00068z-3X@rmk-PC.armlinux.org.uk
2017-02-27dma-buf: add support for compat ioctlMarek Szyprowski1-0/+3
Add compat ioctl support to dma-buf. This lets one to use DMA_BUF_IOCTL_SYNC ioctl from 32bit application on 64bit kernel. Data structures for both 32 and 64bit modes are same, so there is no need for additional translation layer. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/1487683261-2655-1-git-send-email-m.szyprowski@samsung.com
2016-12-30dma-buf: Use recommended structure member referenceDaniel Vetter1-3/+2
I just learned that &struct_name.member_name works and looks pretty even. It doesn't (yet) link to the member directly though, which would be really good for big structures or vfunc tables (where the per-member kerneldoc tends to be long). Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-5-git-send-email-daniel.vetter@ffwll.ch
2016-12-30dma-buf: use preferred struct reference in kernel-docDaniel Vetter1-3/+3
sed -e 's/\( \* .*\)struct &\([_a-z]*\)/\1\&struct \2/' -i Originally I wasnt a friend of this style because I thought a line-break between the "&struct" and "foo" part would break it. But a quick test shows that " * &struct \n * foo\n" works pefectly well with current kernel-doc. So time to mass-apply these changes! Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-4-git-send-email-daniel.vetter@ffwll.ch
2016-12-13dma-buf: Final bits of doc polishDaniel Vetter1-0/+22
- Put all the remaing bits of the old doc into suitable places in the new sphinx world. - Also document the poll support, we forgot to do that. - Delete dma-buf-sharing.txt. v2: Don't forget to update MAINTAINERS. Cc: linux-doc@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/20161209215055.3492-1-daniel.vetter@ffwll.ch
2016-12-13dma-buf: Update cpu access documentationDaniel Vetter1-0/+122
- Again move the information relevant for driver writers next to the callbacks. - Put the overview and userspace interface documentation into a DOC: section within the code. - Remove the text that mmap needs to be coherent - since the DMA_BUF_IOCTL_SYNC landed that's no longer the case. But keep the text that for pte zapping exporters need to adjust the address space. - Add a FIXME that kmap and the new begin/end stuff used by the SYNC ioctl don't really mix correctly. That's something I just realized while doing this doc rework. - Augment function and structure docs like usual. Cc: linux-doc@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> [sumits: fix cosmetic issues] Link: http://patchwork.freedesktop.org/patch/msgid/20161209185309.1682-5-daniel.vetter@ffwll.ch
2016-12-13dma-buf: Reorganize device dma access docsDaniel Vetter1-5/+59
- Put the initial overview for dma-buf into dma-buf.rst. - Put all the comments about detailed semantics into the right kernel-doc comment for functions or ops structure member. - To allow that detail, switch the reworked kerneldoc to inline style for dma_buf_ops. - Tie everything together into a much more streamlined overview comment, relying on the hyperlinks for all the details. - Also sprinkle some links into the kerneldoc for dma_buf and dma_buf_attachment to tie it all together. Cc: linux-doc@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/20161209185309.1682-4-daniel.vetter@ffwll.ch
2016-10-25dma-buf: Rename struct fence to dma_fenceChris Wilson1-14/+14
I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-08-16dma-buf: Wait on the reservation object when sync'ing before CPU accessChris Wilson1-0/+23
Rendering operations to the dma-buf are tracked implicitly via the reservation_object (dmabuf->resv). This is used to allow poll() to wait upon outstanding rendering (or just query the current status of rendering). The dma-buf sync ioctl allows userspace to prepare the dma-buf for CPU access, which should include waiting upon rendering. (Some drivers may need to do more work to ensure that the dma-buf mmap is coherent as well as complete.) v2: Always wait upon the reservation object implicitly. We choose to do it after the native handler in case it can do so more efficiently. Testcase: igt/prime_vgem Testcase: igt/gem_concurrent_blit # *vgem* Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/1471275738-31994-1-git-send-email-chris@chris-wilson.co.uk
2016-07-18dma-buf: Release module reference on creation failureChris Wilson1-4/+11
If we fail to create the anon file, we need to remember to release the module reference on the owner. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1468840582-21469-1-git-send-email-chris@chris-wilson.co.uk
2016-06-20dma-buf: remove dma_buf_debugfs_create_file()Mathias Krause1-20/+9
There is only a single user of dma_buf_debugfs_create_file() and that one got the function pointer cast wrong. With that one fixed, there is no need to have a wrapper for debugfs_create_file(), just call it directly. With no users left, we can remove dma_buf_debugfs_create_file(). While at it, simplify the error handling in dma_buf_init_debugfs() slightly. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/1466339491-12639-2-git-send-email-minipli@googlemail.com
2016-06-20dma-buf: remove dma_buf directory on bufinfo file creation errorsMathias Krause1-1/+4
Change the error handling in dma_buf_init_debugfs() to remove the "dma_buf" directory if creating the "bufinfo" file fails. No need to have an empty debugfs directory around. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2016-06-20dma-buf: propagate errors from dma_buf_describe() on debugfs readMathias Krause1-11/+3
The callback function dma_buf_describe() returns an int not void so the function pointer cast in dma_buf_show() is wrong. dma_buf_describe() can also fail when acquiring the mutex gets interrupted so always returning 0 in dma_buf_show() is wrong, too. Fix both issues by avoiding the indirection via dma_buf_show() and call dma_buf_describe() directly. Rename it to dma_buf_debug_show() to get it in line with the other functions. This type mismatch was caught by the PaX RAP plugin. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Brad Spengler <spender@grsecurity.net> Cc: PaX Team <pageexec@freemail.hu> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2016-05-31dma-buf: use vma_pages()Muhammad Falak R Wani1-3/+4
Replace explicit computation of vma page count by a call to vma_pages(). Also, include <linux/mm.h> Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2016-03-21dma-buf: Update docs for SYNC ioctlDaniel Vetter1-1/+1
Just a bit of wording polish plus mentioning that it can fail and must be restarted. Requested by Sumit. v2: Fix them typos (Hans). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tiago Vignatti <tiago.vignatti@intel.com> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Daniel Vetter <daniel.vetter@intel.com> CC: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Cc: intel-gfx@lists.freedesktop.org Cc: devel@driverdev.osuosl.org Cc: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-03-19dma-buf, drm, ion: Propagate error code from dma_buf_start_cpu_access()Chris Wilson1-6/+11
Drivers, especially i915.ko, can fail during the initial migration of a dma-buf for CPU access. However, the error code from the driver was not being propagated back to ioctl and so userspace was blissfully ignorant of the failure. Rendering corruption ensues. Whilst fixing the ioctl to return the error code from dma_buf_start_cpu_access(), also do the same for dma_buf_end_cpu_access(). For most drivers, dma_buf_end_cpu_access() cannot fail. i915.ko however, as most drivers would, wants to avoid being uninterruptible (as would be required to guarrantee no failure when flushing the buffer to the device). As userspace already has to handle errors from the SYNC_IOCTL, take advantage of this to be able to restart the syscall across signals. This fixes a coherency issue for i915.ko as well as reducing the uninterruptible hold upon its BKL, the struct_mutex. Fixes commit c11e391da2a8fe973c3c2398452000bed505851e Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Feb 11 20:04:51 2016 -0200 dma-buf: Add ioctls to allow userspace to flush Testcase: igt/gem_concurrent_blit/*dmabuf*interruptible Testcase: igt/prime_mmap_coherency/ioctl-errors Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tiago Vignatti <tiago.vignatti@intel.com> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Daniel Vetter <daniel.vetter@intel.com> CC: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Cc: intel-gfx@lists.freedesktop.org Cc: devel@driverdev.osuosl.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1458331359-2634-1-git-send-email-chris@chris-wilson.co.uk
2016-02-12dma-buf: Add ioctls to allow userspace to flushDaniel Vetter1-0/+45
The userspace might need some sort of cache coherency management e.g. when CPU and GPU domains are being accessed through dma-buf at the same time. To circumvent this problem there are begin/end coherency markers, that forward directly to existing dma-buf device drivers vfunc hooks. Userspace can make use of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence would be used like following: - mmap dma-buf fd - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write to mmap area 3. SYNC_END ioctl. This can be repeated as often as you want (with the new data being consumed by the GPU or say scanout device) - munmap once you don't need the buffer any more v2 (Tiago): Fix header file type names (u64 -> __u64) v3 (Tiago): Add documentation. Use enum dma_buf_sync_flags to the begin/end dma-buf functions. Check for overflows in start/length. v4 (Tiago): use 2d regions for sync. v5 (Tiago): forget about 2d regions (v4); use _IOW in DMA_BUF_IOCTL_SYNC and remove range information from struct dma_buf_sync. v6 (Tiago): use __u64 structured padded flags instead enum. Adjust documentation about the recommendation on using sync ioctls. v7 (Tiago): Alex' nit on flags definition and being even more wording in the doc about sync usage. v9 (Tiago): remove useless is_dma_buf_file check. Fix sync.flags conditionals and its mask order check. Add <linux/types.h> include in dma-buf.h. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Reviewed-by: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1455228291-29640-1-git-send-email-tiago.vignatti@intel.com
2016-02-09dma-buf: Remove range-based flushTiago Vignatti1-9/+4
This patch removes range-based information used for optimizations in begin_cpu_access and end_cpu_access. We don't have any user nor implementation using range-based flush. It seems a consensus that if we ever want something like that again (or even more robust using 2D, 3D sub-range regions) we can use the upcoming dma-buf sync ioctl for such. Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com> Reviewed-by: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1450820214-12509-3-git-send-email-tiago.vignatti@intel.com
2015-05-21dma-buf: Minor coding style fixesJagan Teki1-2/+7
- WARNING: Missing a blank line after declarations - WARNING: line over 80 characters - WARNING: please, no space before tabs Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.