aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/dma/at_hdmac.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-11-16dmaengine: at_hdmac: use %pad format string for dma_addr_tArnd Bergmann1-10/+10
dma_addr_t may be defined as 32 or 64 bit depending on configuration, so it cannot be printed using the normal format strings, as gcc correctly warns: drivers/dma/at_hdmac.c: In function 'atc_prep_dma_interleaved': drivers/dma/at_hdmac.c:731:28: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'dma_addr_t {aka long long unsigned int}' [-Wformat=] This changes the format strings to use the special "%pad" format string that prints a dma_addr_t, and changes the arguments so we pass the address by reference as required. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-29dmaengine: hdmac: Add scatter-gathered memset supportMaxime Ripard1-0/+79
Just like memset support, the HDMAC might be used to do a memset over a discontiguous memory area. In such a case, we'll just build up a chain of memset descriptors over the contiguous chunks of memory to set, in order to allow such a support. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-29dmaengine: hdmac: factorise memset descriptor allocationMaxime Ripard1-40/+57
The memset and scatter gathered memset are going to use some common logic to create their descriptors. Move that logic into a function of its own so that we can share it with the future memset_sg callback. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-04Merge tag 'dmaengine-4.3-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-6/+121
Pull dmaengine updates from Vinod Koul: "This time we have aded a new capability for scatter-gathered memset using dmaengine APIs. This is supported in xdmac & hdmac drivers We have added support for reusing descriptors for examples like video buffers etc. Driver will follow The behaviour of descriptor ack has been clarified and documented New devices added are: - dma controller in sun[457]i SoCs - lpc18xx dmamux - ZTE ZX296702 dma controller - Analog Devices AXI-DMAC DMA controller - eDMA support for dma-crossbar - imx6sx support in imx-sdma driver - imx-sdma device to device support Other: - jz4780 fixes - ioatdma large refactor and cleanup for removal of ioat v1 and v2 which is deprecated and fixes - ACPI support in X-Gene DMA engine driver - ipu irq fixes - mvxor fixes - minor fixes spread thru drivers" [ The Kconfig and Makefile entries got re-sorted alphabetically, and I handled the conflict with the new Intel integrated IDMA driver by slightly mis-sorting it on purpose: "IDMA64" got sorted after "IMX" in order to keep the Intel entries together. I think it might be a good idea to just rename the IDMA64 config entry to INTEL_IDMA64 to make the sorting be a true sort, not this mismash. Also, this merge disables the COMPILE_TEST for the sun4i DMA controller, because it does not compile cleanly at all. - Linus ] * tag 'dmaengine-4.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (89 commits) dmaengine: ioatdma: add Broadwell EP ioatdma PCI dev IDs dmaengine :ipu: change ipu_irq_handler() to remove compile warning dmaengine: ioatdma: Fix variable array length dmaengine: ioatdma: fix sparse "error" with prep lock dmaengine: hdmac: Add memset capabilities dmaengine: sort the sh Makefile dmaengine: sort the sh Kconfig dmaengine: sort the dw Kconfig dmaengine: sort the Kconfig dmaengine: sort the makefile drivers/dma: make mv_xor.c driver explicitly non-modular dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller devicetree: Add bindings documentation for Analog Devices AXI-DMAC dmaengine: xgene-dma: Fix the lock to allow client for further submission of requests dmaengine: ioatdma: fix coccinelle warning dmaengine: ioatdma: fix zero day warning on incompatible pointer type dmaengine: tegra-apb: Simplify locking for device using global pause dmaengine: tegra-apb: Remove unnecessary return statements and variables dmaengine: tegra-apb: Avoid unnecessary channel base address calculation dmaengine: tegra-apb: Remove unused variables ...
2015-08-26dmaengine: hdmac: Add memset capabilitiesMaxime Ripard1-3/+118
Just like for the XDMAC, the SoCs that embed the HDMAC don't have any kind of GPU, and need to accelerate a few framebuffer-related operations through their DMA controller. However, unlike the XDMAC, the HDMAC doesn't have the memset capability built-in. That can be easily emulated though, by doing a transfer with a fixed address on the variable that holds the value we want to set. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-07-31dmaengine: at_hdmac: fix residue computationCyrille Pitchen1-45/+87
As claimed by the programmer datasheet and confirmed by the IP designer, the Block Transfer Size (BTSIZE) bitfield of the Channel x Control A Register (CTRLAx) always refers to a number of Source Width (SRC_WIDTH) transfers. Both the SRC_WIDTH and BTSIZE bitfields can be extacted from the CTRLAx register to compute the DMA residue. So the 'tx_width' field is useless and can be removed from the struct at_desc. Before this patch, atc_prep_slave_sg() was not consistent: BTSIZE was correctly initialized according to the SRC_WIDTH but 'tx_width' was always set to reg_width, which was incorrect for MEM_TO_DEV transfers. It led to bad DMA residue when 'tx_width' != SRC_WIDTH. Also the 'tx_width' field was mostly set only in the first and last descriptors. Depending on the kind of DMA transfer, this field remained uninitialized for intermediate descriptors. The accurate DMA residue was computed only when the currently processed descriptor was the first or the last of the chain. This algorithm was a little bit odd. An accurate DMA residue can always be computed using the SRC_WIDTH and BTSIZE bitfields in the CTRLAx register. Finally, the test to check whether the currently processed descriptor is the last of the chain was wrong: for cyclic transfer, last_desc->lli.dscr is NOT equal to zero, since set_desc_eol() is never called, but logically equal to first_desc->txd.phys. This bug has a side effect on the drivers/tty/serial/atmel_serial.c driver, which uses cyclic DMA transfer to receive data. Since the DMA residue was wrong each time the DMA transfer reaches the second (and last) period of the transfer, no more data were received by the USART driver till the cyclic DMA transfer loops back to the first period. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Torsten Fleischer <torfl6749@gmail.com> Tested-by: Jirí Prchal <jiri.prchal@aksignal.cz> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-07-07dmaengine: Use Pointer xt after NULL check.Maninder Singh1-3/+3
Removing static analysis error:- Possible null pointer dereference: xt Because currently xt is dereferenced before NULL check, Thus Use it after NULL Check. Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Reviewed-by: Vaneet Narang <v.narang@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-12dmaengine: hdmac: Implement interleaved transfersMaxime Ripard1-0/+106
The AT91 HDMAC controller supports interleaved transfers through what's called the Picture-in-Picture mode, which allows to transfer a squared portion of a framebuffer. This means that this interleaved transfer only supports interleaved transfers which have a transfer size and ICGs that are fixed across all the chunks. While this is a quite drastic restriction of the interleaved transfers compared to what the dmaengine API allows, this is still useful, and our driver will only reject transfers that do not conform to this. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-04-24Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-11/+164
Pull slave-dmaengine updates from Vinod Koul: - new drivers for: - Ingenic JZ4780 controller - APM X-Gene controller - Freescale RaidEngine device - Renesas USB Controller - remove device_alloc_chan_resources dummy handlers - sh driver cleanups for peri peri and related emmc and asoc patches as well - fixes and enhancements spread over the drivers * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (59 commits) dmaengine: dw: don't prompt for DW_DMAC_CORE dmaengine: shdmac: avoid unused variable warnings dmaengine: fix platform_no_drv_owner.cocci warnings dmaengine: pch_dma: fix memory leak on failure path in pch_dma_probe() dmaengine: at_xdmac: unlock spin lock before return dmaengine: xgene: devm_ioremap() returns NULL on error dmaengine: xgene: buffer overflow in xgene_dma_init_channels() dmaengine: usb-dmac: Fix dereferencing freed memory 'desc' dmaengine: sa11x0: report slave capabilities to upper layers dmaengine: vdma: Fix compilation warnings dmaengine: fsl_raid: statify fsl_re_chan_probe dmaengine: Driver support for FSL RaidEngine device. dmaengine: xgene_dma_init_ring_mngr() can be static Documentation: dma: Add documentation for the APM X-Gene SoC DMA device DTS binding arm64: dts: Add APM X-Gene SoC DMA device and DMA clock DTS nodes dmaengine: Add support for APM X-Gene SoC DMA engine driver dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver dmaengine: renesas,usb-dmac: Add device tree bindings documentation dmaengine: edma: fixed wrongly initialized data parameter to the edma callback dmaengine: ste_dma40: fix implicit conversion ...
2015-03-13dmaengine: at_hdmac: Fix calculation of the residual bytesTorsten Fleischer1-72/+112
This patch fixes the following issues regarding to the calculation of the residue: 1. The residue is always calculated for the current transfer even if the cookie is associated to a pending transfer. 2. For scatter/gather DMA the calculation of the residue for the current transfer doesn't include the bytes of the child descriptors that are already transferred. It only calculates the difference between the transfer's total length minus the number of bytes that are already transferred for the current child descriptor. For example: There is a scatter/gather DMA transfer with a total length of 1 MByte. Getting the residue several times while the transfer is running shows something like that: 1: residue = 975584 2: residue = 1002766 3: residue = 992627 4: residue = 983767 5: residue = 985694 6: residue = 1008094 7: residue = 1009741 8: residue = 1011195 3. The driver stores the residue but never resets it when starting a new transfer. For example: If there are two subsequent DMA transfers. The first one with a total length of 1 MByte and the second one with a total length of 1 kByte. Getting the residue for both transfers shows something like that: transfer 1: residue = 975584 transfer 2: residue = 1048380 Changes from V1: * Fixed coding style of the multi-line comments. * Improved accuracy of the residue calculation when the transfer for the first descriptor is active. Changes from V2: * Member 'tx_width' of 'struct at_desc' restored, because the transfer width can't be derived from the source width when using "slave_sg". The transfer width is needed for the calculation of the residue if either the transfer of the first or the last descriptor is in progress. In the case of a "memory_to_memory_sg" transfer (part of this patch series) the transfer width of both descriptors may differ. Thus it is required to additionally set 'tx_width' of the last descriptor. * Added functions for multiply used calculations. Signed-off-by: Torsten Fleischer <torfl6749@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-13dmaengine: at_hdmac: Add support for memory to memory sg transfersTorsten Fleischer1-11/+164
This patch adds support for memory to memory scatter-gather transfers. Changes from V1: * Fixed coding style of the multi-line comments. Changes from V2: * Added setup of 'desc->tx_width' that is needed to calculate the residue. Signed-off-by: Torsten Fleischer <torfl6749@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-01-14dmaengine: at_hdmac: declare slave capabilitiesLudovic Desroches1-0/+9
Declare slave capabilities to suppress "this driver doesn't support generic slave capabilities reporting" warning. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22dmaengine: hdmac: Split device_controlMaxime Ripard1-48/+73
Split the device_control callback of the Atmel HDMAC driver to make use of the newly introduced callbacks, that will eventually be used to retrieve slave capabilities. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-08-07dma: at_hdmac: fix invalid remaining bytes detectionAlexandre Belloni1-5/+7
Found using smatch: drivers/dma/at_hdmac.c:299 atc_get_bytes_left() warn: unsigned 'atchan->remain_desc' is never less than zero. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-08-04dmaengine: Remove the context argument to the prep_dma_cyclic operationLaurent Pinchart1-2/+1
The argument is always set to NULL and never used. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-03-17dmaengine: at_hdmac: use tasklet_kill in teardownVinod Koul1-1/+0
As discussed in [1] the tasklet_disable is not a proper function for teardown. We need to ensure irq is disabled, followed by ensuring that don't schedule any more tasklets and then its safe to use tasklet_kill(). Here in at_hdmac driver we use free_irq() before tasklet_kill(). The free_irq() will ensure that the irq is disabled and also wait till all scheduled interrupts are executed by invoking synchronize_irq(). So we need to only do tasklet_kill() after invoking free_irq() [1]: http://lwn.net/Articles/588457/ Reported-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-16Merge commit 'dmaengine-3.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengineVinod Koul1-25/+1
Pull dmaengine changes from Dan 1/ Bartlomiej and Dan finalized a rework of the dma address unmap implementation. 2/ In the course of testing 1/ a collection of enhancements to dmatest fell out. Notably basic performance statistics, and fixed / enhanced test control through new module parameters 'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and Linus for their review. 3/ Testing the raid related corner cases of 1/ triggered bugs in the recently added 16-source operation support in the ioatdma driver. 4/ Some minor fixes / cleanups to mv_xor and ioatdma. Conflicts: drivers/dma/dmatest.c Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-14dmaengine: remove DMA unmap from driversBartlomiej Zolnierkiewicz1-25/+0
Remove support for DMA unmapping from drivers as it is no longer needed (DMA core code is now handling it). Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [djbw: fix up chan2parent() unused warning in drivers/dma/dw/core.c] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-13dmaengine: prepare for generic 'unmap' dataDan Williams1-0/+1
Add a hook for a common dma unmap implementation to enable removal of the per driver custom unmap code. (A reworked version of Bartlomiej Zolnierkiewicz's patches to remove the custom callbacks and the size increase of dma_async_tx_descriptor for drivers that don't care about raid). Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> [bzolnier: prepare pl330 driver for adding missing unmap while at it] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-10-25dmaengine: at_hdma: use DMA_COMPLETE for dma completion statusVinod Koul1-1/+1
Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dmaengine: at_hdmac: prepare clk before calling enableBoris BREZILLON1-6/+9
Replace clk_enable/disable with clk_prepare_enable/disable_unprepare to avoid common clk framework warnings. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> [nicolas.ferre@atmel.com: remove return code checking in at_dma_resume_noirq()] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-07-05dmaengine/trivial: at_hdmac: add curly brackets to if/else expressionsNicolas Ferre1-2/+4
Correct coding style following the patch: 7c407d3e54dcc0c79119553c8d5ef176c1d5bc3a (DMA: AT91: Get residual bytes in dma buffer). Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-07-05dmaengine: at_hdmac: remove unsuded atc_cleanup_descriptors()Nicolas Ferre1-31/+0
Since patch 7c407d3e54dcc0c79119553c8d5ef176c1d5bc3a (DMA: AT91: Get residual bytes in dma buffer), the function atc_cleanup_descriptors() is not used anymore. We remove it to prevent warnings. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-07-05dmaengine: at_hdmac: add FIFO configuration parameter to DMA DT bindingLudovic Desroches1-4/+21
For most devices the FIFO configuration is the same i.e. when half FIFO size is available/filled, a source/destination request is serviced. But USART devices have to do it when there is enough space/data available to perform a single AHB access so the ASAP configuration. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-07-05dma: at_hdmac: remove unnecessary platform_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05DMA: AT91: Get residual bytes in dma bufferElen Song1-18/+112
Add support for returning the residue for current transfer cookie by reading the transfered buffer size(BTSIZE) in CTRLA register. For a single buffer cookie, the descriptor length minus BTSIZE can get the residue. For a lli cookie, remain_desc will record remain descriptor length when last descriptor finish, the remain_desc minus BTSIZE can get the current residue. If the cookie has completed successfully, the residue will be zero. If the cookie is in progress, it will be the number of bytes yet to be transferred. If get residue error, the cookie will be turn into error status. Check dma fifo to see if data remain, let issue pending finish remain work if there is. Signed-off-by: Elen Song <elen.song@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05DMA: AT91: Get transfer widthElen Song1-0/+3
In one dma transfer, the data transfer width can be configured and it is limited by source or destination peripheral width, tx_width will save the transfer width, but for memcpy, either source or destination transfer width is taken as tx_width. Signed-off-by: Elen Song <elen.song@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dmaengine: at_hdmac/trivial: rearrange CFG register bits assignmentNicolas Ferre1-5/+4
No modification in CFG register configuration, just rearrange bits directives to group logically and make it more readable. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dmaengine: at_hdmac: extend hardware handshaking interface identificationNicolas Ferre1-0/+2
Peripheral handshaking identification numbers can be bigger than 15, so new fields have been created in the CFG register. Add macros to take this modification into account and use them in at_dma_xlate() function. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dmaengine: at_hdmac/trivial: correct typo in commentNicolas Ferre1-1/+1
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-05-09Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-8/+89
Pull slave-dmaengine updates from Vinod Koul: "This time we have dmatest improvements from Andy along with dw_dmac fixes. He has also done support for acpi for dmanegine. Also we have bunch of fixes going in DT support for dmanegine for various folks. Then Haswell and other ioat changes from Dave and SUDMAC support from Shimoda." * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits) dma: tegra: implement suspend/resume callbacks dma:of: Use a mutex to protect the of_dma_list dma: of: Fix of_node reference leak dmaengine: sirf: move driver init from module_init to subsys_initcall sudmac: add support for SUDMAC dma: sh: add Kconfig at_hdmac: move to generic DMA binding ioatdma: ioat3_alloc_sed can be static ioatdma: Adding write back descriptor error status support for ioatdma 3.3 ioatdma: S1200 platforms ioatdma channel 2 and 3 falsely advertise RAID cap ioatdma: Adding support for 16 src PQ ops and super extended descriptors ioatdma: Removing hw bug workaround for CB3.x .2 and earlier dw_dmac: add ACPI support dmaengine: call acpi_dma_request_slave_channel as well dma: acpi-dma: introduce ACPI DMA helpers dma: of: Remove unnecessary list_empty check DMA: OF: Check properties value before running be32_to_cpup() on it DMA: of: Constant names ioatdma: skip silicon bug workaround for pq_align for cb3.3 ioatdma: Removing PQ val disable for cb3.3 ...
2013-04-30at_hdmac: move to generic DMA bindingLudovic Desroches1-6/+87
Update at_hdmac driver to support generic DMA device tree binding. Devices can still request channel with dma_request_channel() then it doesn't break DMA for non DT boards. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-04-18dmaengine: at_hdmac: fix race condition in atc_advance_work()Ludovic Desroches1-5/+4
The BUG_ON() directive is triggered probably due to a latency modification following inclusion of commit c10d73671ad3 ("softirq: reduce latencies"). This condition has not been met before 3.9-rc1 and doesn't trigger without this patch. We now make sure that DMA channel is idle before calling atc_complete_all() which makes the BUG_ON() "protection" useless. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-15dma: Remove erroneous __exit and __exit_p() referencesMaxin B. John1-2/+2
Removing the annotation with __exit and referencing with __exit_p() present in dma driver module remove hooks. Part of the __devexit and __devexit_p() purge. Signed-off-by: Maxin B. John <maxin.john@enea.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-12dma: at_hdmac: check direction properly for cyclic transfersAndy Shevchenko1-5/+5
dma_transfer_direction is a normal enum. It means we can't usually use the values as bit fields. Let's adjust this check and move it above the usage of the direction parameter, due to the nature of the following usage of it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2012-10-09Merge tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds1-1/+2
Pull sound updates from Takashi Iwai: "This contains pretty many small commits covering fairly large range of files in sound/ directory. Partly because of additional API support and partly because of constantly developed ASoC and ARM stuff. Some highlights: - Introduced the helper function and documentation for exposing the channel map via control API, as discussed in Plumbers; most of PCI drivers are covered, will follow more drivers later - Most of drivers have been replaced with the new PM callbacks (if the bus is supported) - HD-audio controller got the support of runtime PM and the support of D3 clock-stop. Also changing the power_save option in sysfs kicks off immediately to enable / disable the power-save mode. - Another significant code change in HD-audio is the rewrite of firmware loading code. Other than that, most of changes in HD-audio are continued cleanups and standardization for the generic auto parser and bug fixes (HBR, device-specific fixups), in addition to the support of channel-map API. - Addition of ASoC bindings for the compressed API, used by the mid-x86 drivers. - Lots of cleanups and API refreshes for ASoC codec drivers and DaVinci. - Conversion of OMAP to dmaengine. - New machine driver for Wolfson Microelectronics Bells. - New CODEC driver for Wolfson Microelectronics WM0010. - Enhancements to the ux500 and wm2000 drivers - A new driver for DA9055 and the support for regulator bypass mode." Fix up various arm soc header file reorg conflicts. * tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (339 commits) ALSA: hda - Add new codec ALC283 ALC290 support ALSA: hda - avoid unneccesary indices on "Headphone Jack" controls ALSA: hda - fix indices on boost volume on Conexant ALSA: aloop - add locking to timer access ALSA: hda - Fix hang caused by race during suspend. sound: Remove unnecessary semicolon ALSA: hda/realtek - Fix detection of ALC271X codec ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310 ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event ALSA: hda - make a generic unsol event handler ASoC: codecs: Add DA9055 codec driver ASoC: eukrea-tlv320: Convert it to platform driver ALSA: ASoC: add DT bindings for CS4271 ASoC: wm_hubs: Ensure volume updates are handled during class W startup ASoC: wm5110: Adding missing volume update bits ASoC: wm5110: Add OUT3R support ASoC: wm5110: Add AEC loopback support ASoC: wm5110: Rename EPOUT to HPOUT3 ASoC: arizona: Add more clock rates ASoC: arizona: Add more DSP options for mixer input muxes ...
2012-10-01Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds1-4/+4
Pull the trivial tree from Jiri Kosina: "Tiny usual fixes all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) doc: fix old config name of kprobetrace fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc btrfs: fix the commment for the action flags in delayed-ref.h btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID vfs: fix kerneldoc for generic_fh_to_parent() treewide: fix comment/printk/variable typos ipr: fix small coding style issues doc: fix broken utf8 encoding nfs: comment fix platform/x86: fix asus_laptop.wled_type module parameter mfd: printk/comment fixes doc: getdelays.c: remember to close() socket on error in create_nl_socket() doc: aliasing-test: close fd on write error mmc: fix comment typos dma: fix comments spi: fix comment/printk typos in spi Coccinelle: fix typo in memdup_user.cocci tmiofb: missing NULL pointer checks tools: perf: Fix typo in tools/perf tools/testing: fix comment / output typos ...
2012-09-22dmaengine: Pass flags via device_prep_dma_cyclic() callbackPeter Ujfalusi1-1/+2
Change the parameter list of device_prep_dma_cyclic() so the DMA drivers can receive the flags coming from clients. This feature can be used during audio operation to disable all audio related interrupts when the DMA_PREP_INTERRUPT is cleared from the flags. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-14dmaengine: at_hdmac: check that each sg data length is non-nullNicolas Ferre1-0/+11
Avoid the construction of a malformed DMA request sent to the DMA controller. Log message is for debug only because this condition is unlikely to append and may only trigger at driver development time. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Stable <stable@vger.kernel.org> [2.6.31+] Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-14dmaengine: at_hdmac: fix comment in atc_prep_slave_sg()Nicolas Ferre1-1/+1
s/dma_memcpy/slave_sg/ and it is sg length that we are talking about. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Stable <stable@vger.kernel.org> [2.6.31+] Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-01dma: fix commentsMasanari Iida1-4/+4
Correct spelling typo in drivers/dma. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-16dmaengine: at_hdmac: add a few const qualifiersUwe Kleine-König1-2/+2
This prepares of_device_id.data becoming const. Without this change the following warning would occur: drivers/dma/at_hdmac.c: In function 'at_dma_get_driver_data': drivers/dma/at_hdmac.c:1228: warning: return discards qualifiers from pointer target type Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-12dmaengine: at_hdmac: trivial: fix comment in headerNicolas Ferre1-4/+3
Not all Atmel SoCs were pointed out in header comment which was bringing confusion. Remove the truncated list of supported devices, replace by the only one that is not supported. Reported-by: Elen Song <elen.song@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-15dmaengine: at_hdmac: take maxburst from slave configurationNicolas Ferre1-3/+4
The maxburst/chunk size was taken from the private slave DMA data structure. Use the common API provided by DMA_SLAVE_CONFIG to setup src/dst maxburst values. The ctrla field is not needed anymore in the slave private structure nor the header constants that were located in an architecture specific directory. The at91sam9g45_devices.c file that was using this platform data is also modified to remove this now useless data. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-15dmaengine: at_hdmac: remove ATC_DEFAULT_CTRLA constantNicolas Ferre1-7/+5
Not needed constant that was set to 0. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-15dmaengine: fix cyclic dma usageVinod Koul1-1/+3
for cyclic dma, dont makr the descriptor as complte. Fix the remaining users of cyclic dma which do so Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Mika Westerberg <mika.westerberg@iki.fi>
2012-04-20dmaengine: at_hdmac: remove clear-on-read in atc_dostart()Nicolas Ferre1-4/+0
This loop on EBCISR register was designed to clear IRQ sources before enabling a DMA channel. This register is clear-on-read so a race condition can appear if another channel is already active and has just finished its transfer. Removing this read on EBCISR is fixing the issue as there is no case where an IRQ could be pending: we already make sure that this register is drained at probe() time and during resume. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-21dmaengine: at_hdmac: add slave config operationNicolas Ferre1-13/+43
This patch introduces DMA_SLAVE_CONFIG to at_hdmac Atmel DMA driver. It is needed to fix a regression in the use of atmel-mci.c driver on Atmel AT91 platforms brouth by e2b35f3: "dmaengine/dw_dmac: Fix dw_dmac user drivers to adapt to slave_config changes" We remove some parts of the private structure "at_dma_slave" and use the information provided by "struct dma_slave_config": source/destination peripheral registers and access width. AT_DMA_SLAVE_WIDTH_* values used previously are not needed anymore as we now use the standard ones. Although some conversion functions are needed to match register expected values. Some AT91 sub-architecture specific files are slightly touched by this patch but it cannot be split because it can break compilation. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-21dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclicAlexandre Bounine1-2/+5
Add context parameter to device_prep_slave_sg() and device_prep_dma_cyclic() interfaces to allow passing client/target specific information associated with the data transfer. Modify all affected DMA engine drivers. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13dmaengine: consolidate initialization of cookiesRussell King - ARM Linux1-2/+2
Provide a common function to initialize a channels cookie values. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.