aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/dma/sh/Kconfig (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-08-29dmaengine: sh: Add DMAC driver for RZ/G2L SoCBiju Das1-0/+9
Add DMA Controller driver for RZ/G2L SoC. Based on the work done by Chris Brandt for RZ/A DMA driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20210806095322.2326-4-biju.das.jz@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-11dmaengine: Kconfig: Update description for RCAR_DMAC configLad Prabhakar1-2/+2
rcar-dmac driver is used on Renesas R-Car Gen{2,3} and Renesas RZ/G{1,2} SoC's, update the same to reflect the description for RCAR_DMAC config. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Link: https://lore.kernel.org/r/20200911095734.19348-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-21dmaengine: sudmac: remove unused driverSimon Horman1-6/+0
SUDMAC driver was introduced in v3.10 but was never integrated for use by any platform. As it is unused remove it. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-12-05dmaengine: sh: Remove R-Mobile APE6 supportGeert Uytterhoeven1-10/+1
Renesas R-Mobile APE6 support is currently unused: - DMA slaves were never enabled in r8a73a4.dtsi, - The driver relies on legacy filter matching and describing all slaves and MID/RIDs in a table, unlike modern DMA engine drivers for similar hardware like rcar-dmac, - The driver doesn't seem to work well. Remove the driver, it can be resurrected from git history when needed. As this was the last user of SH_DMAE_BASE on Renesas ARM SoCs, the sh-dma-engine driver core is now used on SuperH only. Note that the DT bindings are still present, as r8a73a4.dtsi uses them. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-11-11dmaengine: sh: convert to SPDX identifiersKuninori Morimoto1-0/+1
This patch updates license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2016-02-08dmaengine: sh: Use ARCH_RENESASSimon Horman1-3/+3
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-12-10dmaengine: sh: Remove unused R-Car HPB-DMAC driverGeert Uytterhoeven1-6/+0
As of commit 4baadb9e05c68962 ("ARM: shmobile: r8a7778: remove obsolete setup code"), the Renesas R-Car HPB-DMAC driver is no longer used. In theory it could still be used on R-Car Gen1 SoCs, but that requires adding DT support to the driver, which is not planned. Remove the driver, it can be resurrected from git history when needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-26dmaengine: sort the sh KconfigVinod Koul1-12/+12
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-04-21Merge branch 'topic/sh' into for-linusVinod Koul1-6/+0
2015-04-02dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driverYoshihiro Shimoda1-0/+9
This DMAC is Renesas USB high-speed module DMA controller that supports slave transfer. This USB-DMAC has similar register sets with R-Car Gen2 DMAC, but the USB-DMAC has specific registers to control the USB transactions. If this code is added into the rcar-dmac driver, it will become unreadable. So, this driver is independent from the rcar-dmac. And, this USB-DMAC uses virt-dma infrastructure. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-18dmaengine: remove Renesas Audio DMAC peri periKuninori Morimoto1-6/+0
Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC). And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine. But, in result of DMA ML discussion, 2nd DMAC was concluded that it is not a general purpose DMAC (2nd DMAC is for Device to Device inside sound system). Additionally, current DMAEngine can't support Device to Device, and we don't have correct DT bindings for it at this point. So the easiest solution for it is that move it from DMAEngine to rsnd driver. Audio DMAC peri peri on DMAEngine is no longer needed. remove it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-12-23dmaengine: rcar-dmac: Add Renesas R-Car Gen2 DMA Controller (DMAC) driverLaurent Pinchart1-1/+13
The DMAC is a general purpose multi-channel DMA controller that supports both slave and memcpy transfers. The driver currently supports the DMAC found in the r8a7790 and r8a7791 SoCs. Support for compatible DMA controllers (such as the audio DMAC) will be added later. Feature-wise, automatic hardware handling of descriptors chains isn't supported yet. LPAE support is implemented. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2014-07-31dmaengine: sh: Rework Kconfig and MakefileLaurent Pinchart1-5/+19
Separate helpers and drivers in the Kconfig and Makefile to improve readability and move the CONFIG_OF dependency from the Makefile to Kconfig. [pebolle@tiscali.nl: reported need to rename SHDMA_R8A73A4 instances] Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [horms+renesas@verge.net.au: squashed rename of SHDMA_R8A73A4 instances] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-06-01dmaengine: shdma: Enable driver compilation with COMPILE_TESTLaurent Pinchart1-1/+1
This helps increasing build testing coverage. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-03-29shdma: add R-Car Audio DMAC peri peri driverKuninori Morimoto1-0/+6
Add support Audio DMAC peri peri driver for Renesas R-Car Gen2 SoC, using 'shdma-base' DMA driver framework. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [fixed checkpatch error] Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-02Merge branch 'topic/sh' into for-linusVinod Koul1-0/+4
Conflicts: drivers/dma/sh/Kconfig drivers/dma/sh/shdmac.c Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-02dma: add driver for R-Car HPB-DMACMax Filippov1-0/+6
Add support for HPB-DMAC found in Renesas R-Car SoCs, using 'shdma-base' DMA driver framework. Based on the original patch by Phil Edworthy <phil.edworthy@renesas.com>. Signed-off-by: Max Filippov <max.filippov@cogentembedded.com> [Sergei: removed useless #include, sorted #include's, fixed HPB_DMA_TCR_MAX, fixed formats and removed line breaks in the dev_dbg() calls, rephrased and added IRQ # to the shdma_request_irq() failure message, added MODULE_AUTHOR(), removed '__init'/'__exit' annotations from the probe()/remove() methods, removed '__initdata' annotation from 'hpb_dmae_driver', fixed guard macro name in the header file, fixed #define ASYNCRSTR_ASRST20, added #define ASYNCRSTR_ASRST24, added the necessary runtime PM calls to the probe() and remove() methods, handled errors returned by dma_async_device_register(), beautified comments and #define's.] Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-27DMA: shdma: add r8a73a4 DMAC data to the device ID tableGuennadi Liakhovetski1-0/+4
This configuration data will be used, when DMAC DT support is added to r8a73a4. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-04-30sudmac: add support for SUDMACShimoda, Yoshihiro1-0/+6
Some Renesas USB modules have SUDMAC. This patch supports it using the shdma-base driver. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-04-30dma: sh: add KconfigShimoda, Yoshihiro1-0/+18
This patch adds Kconfig in the drivers/dma/sh. This patch also adds a new config "SH_DMAE_BASE" and the "config SH_DMAE" depends on it. Since some drivers (e.g. sh_mmcif.c) depends on shdma-base.c if CONFIG_DMA_ENGINE=y, the "config SH_DMAE_BASE" is set as "bool". Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.