aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/dma/sprd-dma.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-09-04dmaengine: sprd: Fix the DMA link-list configurationBaolin Wang1-2/+8
For the Spreadtrum DMA link-list mode, when the DMA engine got a slave hardware request, which will trigger the DMA engine to load the DMA configuration from the link-list memory automatically. But before the slave hardware request, the slave will get an incorrect residue due to the first node used to trigger the link-list was configured as the last source address and destination address. Thus we should make sure the first node was configured the start source address and destination address, which can fix this issue. Fixes: 4ac695464763 ("dmaengine: sprd: Support DMA link-list mode") Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/77868edb7aff9d5cb12ac3af8827ef2e244441a6.1567150471.git.baolin.wang@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-21dmaengine: sprd: Add interrupt support for 2-stage transferBaolin Wang1-1/+21
For 2-stage transfer, some users like Audio still need transaction interrupt to notify when the 2-stage transfer is completed. Thus we should enable 2-stage transfer interrupt to support this feature. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-21dmaengine: sprd: Fix the right place to configure 2-stage transferEric Long1-6/+6
Move the 2-stage configuration before configuring the link-list mode, since we will use some 2-stage configuration to fill the link-list configuration. Signed-off-by: Eric Long <eric.long@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-21dmaengine: sprd: Fix block length overflowEric Long1-1/+1
The maximum value of block length is 0xffff, so if the configured transfer length is more than 0xffff, that will cause block length overflow to lead a configuration error. Thus we can set block length as the maximum burst length to avoid this issue, since the maximum burst length will not be a big value which is more than 0xffff. Signed-off-by: Eric Long <eric.long@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-21dmaengine: sprd: Fix the incorrect start for 2-stage destination channelsEric Long1-1/+3
The 2-stage destination channel will be triggered by source channel automatically, which means we should not trigger it by software request. Signed-off-by: Eric Long <eric.long@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-21dmaengine: sprd: Add validation of current descriptor in irq handlerBaolin Wang1-2/+7
When user terminates one DMA channel to free all its descriptors, but at the same time one transaction interrupt was triggered possibly, now we should not handle this interrupt by validating if the 'schan->cur_desc' was set as NULL to avoid crashing the kernel. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-21dmaengine: sprd: Fix the possible crash when getting descriptor statusBaolin Wang1-1/+1
We will get a NULL virtual descriptor by vchan_find_desc() when the descriptor has been submitted, that will crash the kernel when getting the descriptor status. In this case, since the descriptor has been submitted to process, but it is not completed now, which means the descriptor is listed into the 'vc->desc_submitted' list now. So we can not get current processing descriptor by vchan_find_desc(), but the pointer 'schan->cur_desc' will point to the current processing descriptor, then we can use 'schan->cur_desc' to get current processing descriptor's status to avoid this issue. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-02-25dmaengine: sprd: Change channel id to slave id for DMA cell specifierBaolin Wang1-15/+4
We will describe the slave id in DMA cell specifier instead of DMA channel id, thus we should save the slave id from DMA engine translation function, and remove the channel id validation. Meanwhile we do not need set default slave id in sprd_dma_alloc_chan_resources(), remove it. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-12-05dmaengine: sprd: Add me as one of the module authorsEric Long1-0/+1
Add me as one of the module authors. Signed-off-by: Eric Long <eric.long@spreadtrum.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-12-05dmaengine: sprd: Support DMA 2-stage transfer modeEric Long1-1/+97
The Spreadtrum DMA controller supports channel 2-stage tansfer mode, that means we can request 2 dma channels, one for source channel, and another one for destination channel. Once the source channel's transaction is done, it will trigger the destination channel's transaction automatically by hardware signal. Signed-off-by: Eric Long <eric.long@spreadtrum.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-12-05dmaengine: sprd: Support DMA link-list cyclic callbackEric Long1-11/+14
The Spreadtrum DMA link-list mode is always one cyclic transfer, so we should clear the SPRD_DMA_LLIST_END flag for the link-list configuration. Moreover add cyclic callback support for the cyclic transfer. Signed-off-by: Eric Long <eric.long@spreadtrum.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-12-05dmaengine: sprd: Set cur_desc as NULL when free or terminate one dma channelEric Long1-0/+1
It will be failed to start one new transfer if the channel started one none interrupt transfer before, since we will only set the schan->cur_desc as NULL depending on the transfer interrupt now. Thus we should set schan->cur_desc as NULL when free or terminate one dma channel to avoid this issue. Signed-off-by: Eric Long <eric.long@spreadtrum.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-12-05dmaengine: sprd: Fix the last link-list configurationEric Long1-1/+2
We will pass sglen as 0 configure the last link-list configuration when filling the descriptor, which will cause the incorrect link-list configuration. Thus we should check if the sglen is 0 to configure the correct link-list configuration. Signed-off-by: Eric Long <eric.long@spreadtrum.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-12-05dmaengine: sprd: Get transfer residue depending on the transfer directionEric Long1-1/+20
Add one field to save the transfer direction for struct sprd_dma_desc, which is used to get correct transfer residue depending on the transfer direction. [Baolin Wang adds one field to present the transfer direction] Signed-off-by: Eric Long <eric.long@spreadtrum.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-12-05dmaengine: sprd: Remove direction usage from struct dma_slave_configBaolin Wang1-3/+0
The direction field of struct dma_slave_config was marked deprecated, thus remove the usage. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-09-03dmaengine: sprd: Support DMA link-list modeEric Long1-7/+74
The Spreadtrum DMA can support the link-list transaction mode, which means DMA controller can do transaction one by one automatically once we linked these transaction by link-list register. Signed-off-by: Eric Long <eric.long@spreadtrum.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-06-08Merge tag 'dmaengine-4.18-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-146/+203
Pull dmaengine updates from Vinod Koul: - updates to sprd, bam_dma, stm drivers - remove VLAs in dmatest - move TI drivers to their own subdir - switch to SPDX tags for ima/mxs dma drivers - simplify getting .drvdata on bunch of drivers by Wolfram Sang * tag 'dmaengine-4.18-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (32 commits) dmaengine: sprd: Add Spreadtrum DMA configuration dmaengine: sprd: Optimize the sprd_dma_prep_dma_memcpy() dmaengine: imx-dma: Switch to SPDX identifier dmaengine: mxs-dma: Switch to SPDX identifier dmaengine: imx-sdma: Switch to SPDX identifier dmaengine: usb-dmac: Document R8A7799{0,5} bindings dmaengine: qcom: bam_dma: fix some doc warnings. dmaengine: qcom: bam_dma: fix invalid assignment warning dmaengine: sprd: fix an NULL vs IS_ERR() bug dmaengine: sprd: Use devm_ioremap_resource() to map memory dmaengine: sprd: Fix potential NULL dereference in sprd_dma_probe() dmaengine: pl330: flush before wait, and add dev burst support. dmaengine: axi-dmac: Request IRQ with IRQF_SHARED dmaengine: stm32-mdma: fix spelling mistake: "avalaible" -> "available" dmaengine: rcar-dmac: Document R-Car D3 bindings dmaengine: sprd: Move DMA request mode and interrupt type into head file dmaengine: sprd: Define the DMA data width type dmaengine: sprd: Define the DMA transfer step type dmaengine: ti: New directory for Texas Instruments DMA drivers dmaengine: shdmac: Change platform check to CONFIG_ARCH_RENESAS ...
2018-06-06treewide: Use struct_size() for devm_kmalloc() and friendsKees Cook1-2/+2
Replaces open-coded struct size calculations with struct_size() for devm_*, f2fs_*, and sock_* allocations. Automatically generated (and manually adjusted) from the following Coccinelle script: // Direct reference to struct field. @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP) + alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP) + alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(HANDLE, sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(HANDLE, CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-29dmaengine: sprd: Add Spreadtrum DMA configurationEric Long1-0/+182
This patch adds the 'device_config' and 'device_prep_slave_sg' interfaces for users to configure DMA, as well as adding one 'struct sprd_dma_config' structure to save Spreadtrum DMA configuration for each DMA channel. Signed-off-by: Eric Long <eric.long@spreadtrum.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-05-29dmaengine: sprd: Optimize the sprd_dma_prep_dma_memcpy()Eric Long1-128/+39
This is one preparation patch, we can use default DMA configuration to implement the device_prep_dma_memcpy() interface instead of issuing sprd_dma_config(). We will implement one new sprd_dma_config() function with introducing device_prep_slave_sg() interface in following patch. So we can remove the obsolete sprd_dma_config() firstly. Signed-off-by: Eric Long <eric.long@spreadtrum.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-05-17dmaengine: sprd: fix an NULL vs IS_ERR() bugDan Carpenter1-2/+2
We recently cleaned this code up but we need to update the error handling as well. The devm_ioremap_resource() returns error pointers on error, never NULL. Fixes: e7f063ae1a31 ("dmaengine: sprd: Use devm_ioremap_resource() to map memory") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-05-09dmaengine: sprd: Use devm_ioremap_resource() to map memoryBaolin Wang1-4/+1
Instead of checking the return value of platform_get_resource(), we can use devm_ioremap_resource() which has the NULL pointer check and the memory region requesting. Suggested-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-05-07dmaengine: sprd: Fix potential NULL dereference in sprd_dma_probe()Wei Yongjun1-0/+2
platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference a bit later in the code. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = platform_get_resource(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap_nocache(e1, res->start, e2); Fixes: 9b3b8171f7f4 ("dmaengine: sprd: Add Spreadtrum DMA driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-04-27dmaengine: sprd: Move DMA request mode and interrupt type into head fileEric Long1-51/+1
This patch will move the Spreadtrum DMA request mode and interrupt type into one head file for user to configure. Signed-off-by: Eric Long <eric.long@spreadtrum.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-04-27dmaengine: sprd: Define the DMA data width typeBaolin Wang1-3/+11
Define the DMA data width type to make code more readable. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-04-27dmaengine: sprd: Define the DMA transfer step typeEric Long1-6/+13
Define the DMA transfer step type to make code more readable. Signed-off-by: Eric Long <eric.long@spreadtrum.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-01-15dmaengine: sprd: statify 'sprd_dma_prep_dma_memcpy'Vinod Koul1-1/+1
Sparse warns that 'sprd_dma_prep_dma_memcpy' should be static so make it static. drivers/dma/sprd-dma.c:713:32: warning: symbol'sprd_dma_prep_dma_memcpy' was not declared. Should it be static? Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-24dmaengine: sprd: Add Spreadtrum DMA driverBaolin Wang1-0/+988
This patch adds the DMA controller driver for Spreadtrum SC9860 platform. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.