aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/dma/ste_dma40.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-08-01Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-115/+155
* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (37 commits) Improve slave/cyclic DMA engine documentation dmaengine: pl08x: handle the rest of enums in pl08x_width DMA: PL08x: cleanup selection of burst size DMA: PL08x: avoid recalculating cctl at each prepare DMA: PL08x: cleanup selection of buswidth DMA: PL08x: constify plchan->cd and plat->slave_channels DMA: PL08x: separately store source/destination cctl DMA: PL08x: separately store source/destination slave address DMA: PL08x: clean up LLI debugging DMA: PL08x: select LLI bus only once per LLI setup DMA: PL08x: remove unused constants ARM: mxs-dma: reset after disable channel dma: intel_mid_dma: remove redundant pci_set_drvdata calls dma: mxs-dma: fix unterminated platform_device_id table dmaengine: pl330: make platform data optional dmaengine: imx-sdma: return proper error if kzalloc fails pch_dma: Fix CTL register access issue dmaengine: mxs-dma: skip request_irq for NO_IRQ dmaengine/coh901318: fix slave submission semantics dmaengine/ste_dma40: allow memory buswidth/burst to be configured ... Fix trivial whitespace conflict in drivers/dma/mv_xor.c
2011-07-14dmaengine/ste_dma40: allow memory buswidth/burst to be configuredRabin Vincent1-66/+102
Currently the runtime config implementation forces the memory side parameters to be the same as the peripheral side. Allow these to be different, and check for misconfiguration. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com> Tested-by: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> Reviewed-by: Per Forlin <per.forlin@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Robert Marklund <robert.marklund@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14dmaengine/ste_dma40: use AMBA PrimeCell helper macrosLinus Walleij1-46/+26
The DMA40 is not a PrimeCell from ARM, but it still use the same ID registers. So let's utilize the existing macros in the PrimeCell header to identify manufacturer and revision of the IP block instead of reinventing the wheel. Cc: Robert Marklund <robert.marklund@stericsson.com> Cc: Per Forlin <per.forlin@linaro.org> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14dmaengine/ste_dma40: make the cyclic alloc NOWAITRobert Marklund1-1/+1
This function may be initiated from IRQ context, so the allocation must allocate NOWAIT memory. Signed-off-by: Robert Marklund <robert.marklund@stericsson.com> Reviewed-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Philippe Langlais <philippe.langlais@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14dmaengine/ste_dma40: fix missing kernel-docom prakash1-0/+2
Missing documentation creates kernel-doc warnings, so add the documenation. Signed-off-by: Om Prakash <omprakash.pal@stericsson.com> Reviewed-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14dmaengine/ste_dma40: add a separate queue for pending requestsPer Forlin1-2/+24
tx_submit will add descriptors to the pending queue. Issue pending will then move the pending descriptors to the transfer queue. Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-06-21net: remove mm.h inclusion from netdevice.hAlexey Dobriyan1-0/+1
Remove linux/mm.h inclusion from netdevice.h -- it's unused (I've checked manually). To prevent mm.h inclusion via other channels also extract "enum dma_data_direction" definition into separate header. This tiny piece is what gluing netdevice.h with mm.h via "netdevice.h => dmaengine.h => dma-mapping.h => scatterlist.h => mm.h". Removal of mm.h from scatterlist.h was tried and was found not feasible on most archs, so the link was cutoff earlier. Hope people are OK with tiny include file. Note, that mm_types.h is still dragged in, but it is a separate story. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-28Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_txLinus Torvalds1-2/+2
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (33 commits) x86: poll waiting for I/OAT DMA channel status maintainers: add dma engine tree details dmaengine: add TODO items for future work on dma drivers dmaengine: Add API documentation for slave dma usage dmaengine/dw_dmac: Update maintainer-ship dmaengine: move link order dmaengine/dw_dmac: implement pause and resume in dwc_control dmaengine/dw_dmac: Replace spin_lock* with irqsave variants and enable submission from callback dmaengine/dw_dmac: Divide one sg to many desc, if sg len is greater than DWC_MAX_COUNT dmaengine/dw_dmac: set residue as total len in dwc_tx_status if status is !DMA_SUCCESS dmaengine/dw_dmac: don't call callback routine in case dmaengine_terminate_all() is called dmaengine: at_hdmac: pause: no need to wait for FIFO empty pch_dma: modify pci device table definition pch_dma: Support new device ML7223 IOH pch_dma: Support I2S for ML7213 IOH pch_dma: Fix DMA setting issue pch_dma: modify for checkpatch pch_dma: fix dma direction issue for ML7213 IOH video-in dmaengine: at_hdmac: use descriptor chaining help function dmaengine: at_hdmac: implement pause and resume in atc_control ... Fix up trivial conflict in drivers/dma/dw_dmac.c
2011-05-19dmaengine: move link orderLinus Walleij1-1/+1
Move the dmaengine subsystem up early in the drivers Makefile so DMA is made available early to all drivers, just like e.g. regulators. Now even regulators can use DMA on the same initlevel. As a result we can bump the ste_dma40 and coh901318 dmaengine drivers down one initlevel to subsys_init(). Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-09dmaengine/ste_dma40: fix introduced warningsPhilippe Langlais1-1/+1
The compiler nowadays moans about possibly non-assigned variable. Fix this by default-assigning 0. Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-03-31Fix common misspellingsLucas De Marchi1-2/+2
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-01-30dma40: cyclic xfer supportRabin Vincent1-32/+140
Support cyclic transfers, which are useful for ALSA drivers. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: stop ongoing transfers in DMA_TERMINATE_ALLRabin Vincent1-13/+21
The current implementation of DMA_TERMINATE_ALL leaves ongoing transfers running. Fix it. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: fix DMA_SG capability and channelsRabin Vincent1-37/+34
The DMA_SG cap is enabled on the wrong channel, and the pointers are repeatedly set incorrectly. Fix it and combine the ops settings to a common function. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: handle failure to allocate first LCLARabin Vincent1-0/+5
Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: extract lcla code into separate functionRabin Vincent1-42/+50
Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: unify src/dst addr checkRabin Vincent1-13/+16
Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: pass the info pointer all the way to reduce argument countRabin Vincent1-6/+2
Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: unify d40_log_sg_to_lli funcs for mem and slaveRabin Vincent1-25/+16
Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: move lli_load to main source fileRabin Vincent1-4/+18
These register writes are better placed in the main source file rather than ll.c. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: combine mem and slave prep_sg functionsRabin Vincent1-94/+62
Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: remove export of stedma40_memcpy_sgRabin Vincent1-1/+1
The dmaengine framework has the API for this now. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: combine mem and slave sg-to-lli functionsRabin Vincent1-110/+84
Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: remove duplicated dev addr codeRabin Vincent1-36/+30
Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: combine duplicated d40_pool_lli_alloc() callsRabin Vincent1-24/+14
Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: combine desc init functionsRabin Vincent1-44/+32
The desc init code can be shared between the mem and slave prep routines. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: implement prep_memcpy as a wrapper around memcpy_sgRabin Vincent1-98/+9
To simplify the code. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: remove unnecessary castsRabin Vincent1-4/+2
Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: fix DMA API usage for LLIsRabin Vincent1-17/+41
Map and unmap the LLIs and use dma_sync_single_for_device() appropriately instead of mapping and never unmapping them. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: fix DMA API usage for LCLARabin Vincent1-8/+25
Map the buffer once and use dma_sync*() appropriately instead of mapping the buffer over and over without unmapping it. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: remove unnecessary ALIGN()sRabin Vincent1-5/+3
ALIGN(x * y, y) == x * y ALIGN(aligned + x * y, y) == aligned + x * y Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: allow realtime and priority for event linesRabin Vincent1-0/+34
DB8500v2's DMA40 (revision 3) allows setting event lines as high priority and real time. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: fix comment to refer to SOCs rather than boardsRabin Vincent1-2/+3
And add DB8500v2 information. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: use helpers for error functionsRabin Vincent1-127/+74
Almost every use of dev_err in this driver prints the function name. Abstract out wrappers to help with this and reduce code duplication. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: use helpers for channel type checkRabin Vincent1-22/+32
The somewhat confusing check d40c->log_num == D40_PHY_CHAN and its variants are used in several places to check if a channel is logical or physical. Use appropriately named helpers to do this to make the code more readable. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: use helper for channel registers baseRabin Vincent1-44/+30
The register offset computation for accessing channel registers is copy/pasted in several places. Create a helper function to do it. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: remove "hardware link with previous jobs" codeRabin Vincent1-107/+6
This link in hardware with previous jobs code is: - unused, no clients using or requiring this feature - incomplete, being implemented only for physical channels - broken, only working to perform one link Remove it. This also allows us to get rid of the channel pause in the submit_tx() routine. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: ensure event lines get enabledRabin Vincent1-17/+46
The controller sometimes fails to register the enable of the event line when both src and dst event lines are used on the same logical channel. Implement the recommended software workaround, which is to retry the write until it works. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: make init function staticRabin Vincent1-1/+1
Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-04dmaengine: dma40: Add support to split up large elementsPer Forlin1-39/+152
The maximum transfer size of the stedma40 is (64k-1) x data-width. If the transfer size of one element exceeds this limit the job is split up and sent as linked transfer. Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19Merge branch 'dma40' into dmaengineDan Williams1-18/+38
2010-10-19ste_dma40: remove enum for endianessRabin Vincent1-2/+2
A bool will suffice. The default is little endian. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19ste_dma40: move mode_opt to separate configRabin Vincent1-2/+26
Defaults are "basic mode" for physical channels, and "logical source logical destination" for logical channels. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19ste_dma40: move channel mode to a separate fieldRabin Vincent1-6/+2
And keep it logical by default. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19ste_dma40: add variable to indicate valid dma_cfgRabin Vincent1-8/+8
Since we want to reduce the amount of required channel configuration and remove channel_type, don't depend on it to indicate whether the configuration is valid. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07Merge branches 'dma40', 'pl08x', 'fsldma', 'imx' and 'intel-mid' into dmaengineDan Williams1-0/+17
2010-10-07DMAENGINE: Remove stedma40_set_psize and pre_transfer hook in ste_dma40Per Forlin1-51/+1
Remove obsolete pre_transfer hook in stedma40_chan_cfg. The intent of this hook is merely to handle burst size compensation for ux500 variant MMCI. Remove obsolete stedma40_set_psize since it is only called from pre_transfer. DMAEngine device_control replaces the functionality of stedma40_set_psize. Signed-off-by: Per Forlin <per.forlin@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07DMAENGINE: Set burst size for phy and log chans in ste_dma40 dev_controlPer Forlin1-8/+26
Set burst for physical or logical channels respectively. Convert the values in dma_cfg to dma reg bits for physical or logical channels. Signed-off-by: Per Forlin <per.forlin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07DMAENGINE: ste_dma40: fix resource leaks in error paths.Rabin Vincent1-4/+13
Fix some leaks of allocated descriptors in error paths. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07DMAENGINE: ste_dma40: fix desc_getRabin Vincent1-9/+14
Fix desc_get to alloc a descriptor from the cache if the ones in the list are waiting for the ack. Also, memzero the descriptor when allocated from the list to ensure all fields are cleared. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.