aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/dma
AgeCommit message (Collapse)AuthorFilesLines
2013-01-12dma: ep93xx_dma: reuse is_slave_direction helperAndy Shevchenko1-2/+1
The is_slave_direction helps to check if the transfer type is slave. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-12dma: dw_dmac: check direction properly in dw_dma_cyclic_prepAndy Shevchenko1-2/+3
dma_transfer_direction is a normal enum. It means we can't usually use the values as bit fields. Let's adjust this check and move it above the usage of the direction parameter, due to the nature of the following usage of it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-12dma: at_hdmac: check direction properly for cyclic transfersAndy Shevchenko1-5/+5
dma_transfer_direction is a normal enum. It means we can't usually use the values as bit fields. Let's adjust this check and move it above the usage of the direction parameter, due to the nature of the following usage of it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-11ARM: OMAP: Fix dmaengine init for multiplatformTony Lindgren1-19/+1
Otherwise omap dmaengine will initialized when booted on other SoCs. Fix this by initializing the platform device in arch/arm/*omap*/dma.c instead. Cc: Russell King <linux@arm.linux.org.uk> Cc: Dan Williams <djbw@fb.com> Cc: Vinod Koul <vinod.koul@intel.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-09dma: dw_dmac: add dwc_chan_pause and dwc_chan_resumeAndy Shevchenko1-9/+22
We will use at least the dwc_chan_resume() later. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-09dw_dmac: update tx_node_active in dwc_do_single_blockAndy Shevchenko1-8/+6
The "else" keyword in the dw_dma_tasklet is removed as well. All together simplifies the logic of the code and understanding of what is happening there. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-09dw_dmac: remove redundant checkAndy Shevchenko1-1/+1
There is no need to check the callback_required parameter, due to we check the callback pointer to be a non-NULL. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-09dw_dmac: check for mapping errorsAndy Shevchenko1-6/+14
Otherwise we get a warning in case of CONFIG_DMA_API_DEBUG=y [ 45.775943] WARNING: at lib/dma-debug.c:933 check_unmap+0x5d6/0x6ac() [ 45.782369] dw_dmac dw_dmac.0: DMA-API: device driver failed to check map error[device address=0x00000000356efcc0] [size=28 bytes] [mapped as single] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-09dw_dmac: absence of pdata isn't critical when autocfg is setAndy Shevchenko1-7/+16
The patch allows to probe the device when platform data is absent and hardware auto configuration is enabled. In that case the default platform data is used where the channel allocation order is set to ascending, channel priority is set to ascending, and private property is set to true. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-09dma: tegra: implement flags parameters for cyclic transferLaxman Dewangan1-2/+6
The flag parameter is added in the cyclic transfer request. Use the flag option of: - DMA_PREP_INTERRUPT for enabling interrupt. - DMA_CTRL_ACK for deciding whether ack is requred or not for descriptor. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> CC: <stable@vger.kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-08Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-3/+6
Pull ARM SoC fixes from Olof Johansson: "People are back from the holiday breaks, and it shows. Here are a bunch of fixes for a number of platforms: - A couple of small fixes for Nomadik - A larger set of changes for kirkwood/mvebu - uart driver selection, dt clocks, gpio-poweroff fixups, a few __init annotation fixes and some error handling improvement in their xor dma driver. - i.MX had a couple of minor fixes (and a critical one for flexcan2 clock setup) - MXS has a small board fix and a framebuffer bugfix - A set of fixes for Samsung Exynos, fixing default bootargs and some Exynos5440 clock issues - A set of OMAP changes including PM fixes and a few sparse warning fixups All in all a bit more positive code delta than we'd ideally want to see here, mostly from the OMAP PM changes, but nothing overly crazy." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) ARM: clps711x: Fix bad merge of clockevents setup ARM: highbank: save and restore L2 cache and GIC on suspend ARM: highbank: add a power request clear ARM: highbank: fix secondary boot and hotplug ARM: highbank: fix typos with hignbank in power request functions ARM: dts: fix highbank cpu mpidr values ARM: dts: add device_type prop to cpu nodes on Calxeda platforms ARM: mx5: Fix MX53 flexcan2 clock ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array pinctrl: mvebu: make pdma clock on dove mandatory ARM: Dove: Add pinctrl clock to DT dma: mv_xor: fix error handling for clocks dma: mv_xor: fix error handling of mv_xor_channel_add() arm: mvebu: Add missing ; for cpu node. arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces arm: mvebu: Armada XP MV78230 has two cores, not one clk: mvebu: Remove inappropriate __init tagging ARM: Kirkwood: Use fixed-regulator instead of board gpio call ARM: Kirkwood: Fix missing sdio clock ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers ...
2013-01-08dmaengine: imx-dma: Disable use of hw_chain to fix sg_dma transfers.Javier Martin1-3/+2
HW chaining is currently broken in imx-dma. It can be easily reproduced doing intensive accesses to a external MMC card and checking how the file system is corrupted. Preventing the driver to use HW chaining solves these issues. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-08dma: mxs-dma: Fix build warnings with W=1Fabio Estevam1-4/+4
Fix the following warnings when building with W=1 option: drivers/dma/mxs-dma.c: In function 'mxs_dma_alloc_chan_resources': drivers/dma/mxs-dma.c:368:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/dma/mxs-dma.c: In function 'mxs_dma_prep_slave_sg': drivers/dma/mxs-dma.c:481:17: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/dma/mxs-dma.c:494:3: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/dma/mxs-dma.c:515:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/dma/mxs-dma.c: In function 'mxs_dma_prep_dma_cyclic': drivers/dma/mxs-dma.c:563:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-08dma: tegra: add support for Tegra114 SoCLaxman Dewangan1-1/+12
NVIDIA's Tegra114 has APB DMA controller which has 32 dma channels and support support channel wise pause control. Add support for Tegra114 which uses the channel wise pause control hardware feature. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-08dma: tegra: add support for channel wise pauseLaxman Dewangan1-5/+38
NVIDIA's some SoCs like Tegra114 support the channel wise pause control inplace of global pause which pauses all DMA channels. When SoCs support the channel wise pause control then it uses the global pause for clock gating for register access as well as all DMA channel pause. Hence DMA registers are not accessible if DMAs are globally paused on these new SoCs. Add support for channel wise pause feature if SoCs support it. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-07dma: ipu: Drop unused spinlockJean Delvare1-1/+0
I was checking why this spinlock was never initialized, but it turns out it's not used anywhere, so we can drop it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Dan Williams <djbw@fb.com>
2013-01-07ioat: remove chanerr mask setting for IOAT v3.xDave Jiang1-6/+1
The existing code set a value in the PCI_CHANERRMSK_INT register for a workaround to address a pre-silicon bug on the Intel 5520 IO hub that has been fixed when the hardware was released. There is no need for this code. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <djbw@fb.com>
2013-01-07ioat: Add alignment workaround for IVB platformsDave Jiang3-12/+32
The PCI IDs for IvyBridge IOAT DMA needs to go into a header file since dma_v3.c looks them up for certain hardware workarounds. Need to add to the alignment workaround for IOAT 3.2 since it wasn't fixed in IVB. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <djbw@fb.com>
2013-01-07dmaengine: add cpu_relax() to busy-loop in dma_sync_wait()Bartlomiej Zolnierkiewicz1-1/+4
Removal of the busy-loop from dma_sync_wait() is not a trivial task so just add cpu_relax() to the loop for now. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dan Williams <djbw@fb.com>
2013-01-07ioat3: add missing DMA unmap to ioat_xor_val_self_test()Bartlomiej Zolnierkiewicz1-17/+59
Make ioat_xor_val_self_test() do DMA unmapping itself and fix handling of failure cases. Cc: Dan Williams <djbw@fb.com> Cc: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dan Williams <djbw@fb.com>
2013-01-07dmaengine/dmatest: terminate transfers only in case of errorsShiraz Hashim1-1/+3
dmatest erroneously terminated transfers in normal cases also leading to test failures for multiple threads over a channel. Fix this and terminate transfers only in case of errors. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Deepak Sikri <deepak.sikri@st.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2013-01-07dma: sh: Don't use ENODEV for failing slave lookupGuennadi Liakhovetski1-1/+1
If dmaengine driver's .device_alloc_chan_resources() method returns -ENODEV, dma_request_channel() will decide, that the driver has been removed and will remove the device from its list. To prevent this use ENXIO if a slave lookup fails. Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2013-01-07dmatest: Fix NULL pointer dereference on ioatJon Mason1-2/+2
device_control is an optional and not implemented in all DMA drivers. Any calls to these will result in a NULL pointer dereference. dmatest makes two of these calls when completing the kernel thread and removing the module. These are corrected by calling the dmaengine_device_control wrapper and checking for a non-existant device_control function pointer there. Signed-off-by: Jon Mason <jon.mason@intel.com> CC: Vinod Koul <vinod.koul@intel.com> CC: Dan Williams <djbw@fb.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2013-01-07DMA: PL330: Use devm_* functionsSachin Kamat1-27/+10
devm_* functions are device managed and make the code and error handling a bit simpler. Cc: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2013-01-07dmaengine: sirf: enable the driver support new SiRFmarco SoCBarry Song2-8/+21
The driver supports old up SiRFprimaII SoCs, this patch makes it support the new SiRFmarco as well. SiRFmarco, as a SMP SoC, adds new DMA_INT_EN_CLR and DMA_CH_LOOP_CTRL_CLR registers, to disable IRQ/Channel, we should write 1 to the corresponding bit in the two CLEAR register. Tested on SiRFmarco using SPI driver: $ /mnt/spidev-sirftest -D /dev/spidev32766.0 spi mode: 0 bits per word: 8 max speed: 500000 Hz (500 KHz) 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 $ cat /proc/interrupts CPU0 CPU1 32: 1593 0 GIC sirfsoc_timer0 33: 0 3533 GIC sirfsoc_timer1 44: 0 0 GIC sirfsoc_dma 45: 16 0 GIC sirfsoc_dma 47: 6 0 GIC sirfsoc_spi 50: 5654 0 GIC sirfsoc-uart ... Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2013-01-07ioat: add missing DMA unmap to ioat_dma_self_test()Bartlomiej Zolnierkiewicz1-4/+7
Make ioat_dma_self_test() do DMA unmapping itself and fix handling of failure cases. Cc: Dan Williams <djbw@fb.com> Cc: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dan Williams <djbw@fb.com>
2013-01-07dma: Convert dev_printk(KERN_<LEVEL> to dev_<level>(Joe Perches3-51/+42
dev_<level> calls take less code than dev_printk(KERN_<LEVEL> and reducing object size is good. Coalesce formats for easier grep. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2013-01-07dmatest: adjust invalid module parameters for number of source buffersAkinobu Mita1-3/+13
DMA Engine test module has module parameters to set the number of source buffers for xor and pq operations. We can set these values larger than the maximum number of sources that the device can support. These values are not adjusted and the unsupported number of source buffers are passed to the device. But most drivers don't check it, so unexpected results will happen. This makes an appropriate adjustment for these module parameters before use. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2013-01-07dma: amba-pl08x: use vchan_dma_desc_free_listAkinobu Mita1-7/+1
vchan_dma_desc_free_list() iterates through each virt_dma_desc in the specified list_head and calls vchan->desc_free(). We can use it instead of repeated execution of pl08x_desc_free() for each virt_dma_desc in the list_head. Because vchan->desc_free callback is set as pl08x_desc_free() for amba-pl08x driver. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2013-01-07dw_dmac: introduce to_dw_desc() macroAndy Shevchenko2-4/+4
The to_dw_desc() macro helps to retrieve the dw_desc node from the corresponding list_head structure. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2013-01-07dw_dmac: change dev_crit to dev_WARN in dwc_handle_errorAndy Shevchenko1-3/+3
In case of handling a bad descriptor the dwc_handle_error() will dump a stack as well. It's a lot more verbose and more likely to get user's attention. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2013-01-07dw_dmac: don't call platform_get_drvdata twiceAndy Shevchenko1-2/+2
There is no need to call platform_get_drvdata twice as we have it already in dw variable. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2013-01-07dw_dmac: change dev_printk() to corresponding macrosAndy Shevchenko1-9/+6
Change printk(KERN_INFO ..., dev_name(...), ...) to dev_info() as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2013-01-07dmaengine: dw_dmac: amend description and indentationHeikki Krogerus1-3/+3
The driver will be used as a core part for various implementations of the DesignWare DMA device. The patch adjusts description on the top and corrects paragraph indentation in few places across the code. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2013-01-07dmaengine: dw_dmac: remove CLK dependencyHeikki Krogerus1-1/+0
This driver could be used on different platforms. Thus, the HAVE_CLK dependency is dropped away. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2013-01-07dmaengine: dw_dmac: Enhance device tree supportViresh Kumar2-0/+138
dw_dmac driver already supports device tree but it used to have its platform data passed the non-DT way. This patch does following changes: - pass platform data via DT, non-DT way still takes precedence if both are used. - create generic filter routine - Earlier slave information was made available by slave specific filter routines in chan->private field. Now, this information would be passed from within dmac DT node. Slave drivers would now be required to pass bus_id (a string) as parameter to this generic filter(), which would be compared against the slave data passed from DT, by the generic filter routine. - Update binding document Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [Fixed __devinit usage] Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2013-01-07dma: coh901318: cut down on platform data abstractionLinus Walleij1-67/+7
Since we merged the platform data into the driver we can remove the middle-man abstraction. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-07dma: coh901318: merge header filesLinus Walleij4-124/+108
We do not need two header files for the two parts of the driver to talk to each other so merge them into one. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-07dma: coh901318: push definitions into driverLinus Walleij3-212/+209
Move everything in the header file that is not used in both the main driver and the LLI portions into the driver, including register definitions and such. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-07dma: coh901318: push header down into the DMA subsystemLinus Walleij4-4/+247
The defines in U300's <mach/coh901318.h> are now only used by the DMA engine driver itself, so move the header down into the DMA subsystem. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-07dma: coh901318: skip hard-coded addressesLinus Walleij1-22/+13
Remove hard-coded target addresses altogether. Skip the prefix "runtime_*" from the variables, since all of these are now runtime and their names are unique enough already. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-07dma: coh901318: remove hardcoded target addressesLinus Walleij1-19/+0
Nowadays the clients should use the dmaengine framework to tell the DMA driver what target address to use, so delete these addresses, they are for an out-of-tree driver anyway. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-07dma: coh901318: push platform data into driverLinus Walleij1-3/+1085
We're only ever going to support the U300 with this driver so skip the separation of platform data from driver, and push it down into the driver itself. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-07dma: coh901318: create a proper platform data fileLinus Walleij1-0/+1
This extracts the platform data that we will keep generic from the U300 platform and associates it with the COH901318 driver in <linux/platform_data/dma-coh901318.h>. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-06pch_dma: use module_pci_driver to simplify the codeWei Yongjun1-12/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2013-01-06drivers/dma: remove CONFIG_EXPERIMENTALKees Cook1-1/+1
This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. CC: Vinod Koul <vinod.koul@intel.com> CC: Dan Williams <djbw@fb.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2013-01-06dmaengine: add helper function to request a slave DMA channelJon Hunter1-0/+16
Currently slave DMA channels are requested by calling dma_request_channel() and requires DMA clients to pass various filter parameters to obtain the appropriate channel. With device-tree being used by architectures such as arm and the addition of device-tree helper functions to extract the relevant DMA client information from device-tree, add a new function to request a slave DMA channel using device-tree. This function is currently a simple wrapper that calls the device-tree of_dma_request_slave_channel() function. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jon Hunter <jon-hunter@ti.com> Reviewed-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2013-01-06dma: mv_xor: fix error handling for clocksThomas Petazzoni1-2/+5
When a channel fails to initialize, we release all ressources, including clocks. However, a XOR unit is not necessarily associated to a clock (some variants of Marvell SoCs have a clock for XOR units, some don't), so we shouldn't unconditionally be releasing the clock. Instead, just like we do in the mv_xor_remove() function, we should check if one clock was found before releasing it. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06dma: mv_xor: fix error handling of mv_xor_channel_add()Thomas Petazzoni1-1/+1
When mv_xor_channel_add() fails for one XOR channel, we jump to the err_channel_add label to clean up all previous channels that had been initialized correctly. Unfortunately, while handling this error condition, we were disposing the IRQ mapping before calling mv_xor_channel_remove() (which does the free_irq()), which is incorrect. Instead, do things properly in the reverse order of the initialization: first remove the XOR channel (so that free_irq() is done), and then dispose the IRQ mapping. This avoids ugly warnings when for some reason one of the XOR channel fails to initialize. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06ioat: Fix DMA memory sync direction correct flagShuah Khan1-1/+1
ioat does DMA memory sync with DMA_TO_DEVICE direction on a buffer allocated for DMA_FROM_DEVICE dma, resulting in the following warning from dma debug. Fixed the dma_sync_single_for_device() call to use the correct direction. [ 226.288947] WARNING: at lib/dma-debug.c:990 check_sync+0x132/0x550() [ 226.288948] Hardware name: ProLiant DL380p Gen8 [ 226.288951] ioatdma 0000:00:04.0: DMA-API: device driver syncs DMA memory with different direction [device address=0x00000000ffff7000] [size=4096 bytes] [mapped with DMA_FROM_DEVICE] [synced with DMA_TO_DEVICE] [ 226.288953] Modules linked in: iTCO_wdt(+) sb_edac(+) ioatdma(+) microcode serio_raw pcspkr edac_core hpwdt(+) iTCO_vendor_support hpilo(+) dca acpi_power_meter ata_generic pata_acpi sd_mod crc_t10dif ata_piix libata hpsa tg3 netxen_nic(+) sunrpc dm_mirror dm_region_hash dm_log dm_mod [ 226.288967] Pid: 1055, comm: work_for_cpu Tainted: G W 3.3.0-0.20.el7.x86_64 #1 [ 226.288968] Call Trace: [ 226.288974] [<ffffffff810644cf>] warn_slowpath_common+0x7f/0xc0 [ 226.288977] [<ffffffff810645c6>] warn_slowpath_fmt+0x46/0x50 [ 226.288980] [<ffffffff81345502>] check_sync+0x132/0x550 [ 226.288983] [<ffffffff81345c9f>] debug_dma_sync_single_for_device+0x3f/0x50 [ 226.288988] [<ffffffff81661002>] ? wait_for_common+0x72/0x180 [ 226.288995] [<ffffffffa019590f>] ioat_xor_val_self_test+0x3e5/0x832 [ioatdma] [ 226.288999] [<ffffffff811a5739>] ? kfree+0x259/0x270 [ 226.289004] [<ffffffffa0195d77>] ioat3_dma_self_test+0x1b/0x20 [ioatdma] [ 226.289008] [<ffffffffa01952c3>] ioat_probe+0x2f8/0x348 [ioatdma] [ 226.289011] [<ffffffffa0195f51>] ioat3_dma_probe+0x1d5/0x2aa [ioatdma] [ 226.289016] [<ffffffffa0194d12>] ioat_pci_probe+0x139/0x17c [ioatdma] [ 226.289020] [<ffffffff81354b8c>] local_pci_probe+0x5c/0xd0 [ 226.289023] [<ffffffff81083e50>] ? destroy_work_on_stack+0x20/0x20 [ 226.289025] [<ffffffff81083e68>] do_work_for_cpu+0x18/0x30 [ 226.289029] [<ffffffff8108d997>] kthread+0xb7/0xc0 [ 226.289033] [<ffffffff8166cef4>] kernel_thread_helper+0x4/0x10 [ 226.289036] [<ffffffff81662d20>] ? _raw_spin_unlock_irq+0x30/0x50 [ 226.289038] [<ffffffff81663234>] ? retint_restore_args+0x13/0x13 [ 226.289041] [<ffffffff8108d8e0>] ? kthread_worker_fn+0x1a0/0x1a0 [ 226.289044] [<ffffffff8166cef0>] ? gs_change+0x13/0x13 [ 226.289045] ---[ end trace e1618afc7a606089 ]--- [ 226.289047] Mapped at: [ 226.289048] [<ffffffff81345307>] debug_dma_map_page+0x87/0x150 [ 226.289050] [<ffffffffa019653c>] dma_map_page.constprop.18+0x70/0xb34 [ioatdma] [ 226.289054] [<ffffffffa0195702>] ioat_xor_val_self_test+0x1d8/0x832 [ioatdma] [ 226.289058] [<ffffffffa0195d77>] ioat3_dma_self_test+0x1b/0x20 [ioatdma] [ 226.289061] [<ffffffffa01952c3>] ioat_probe+0x2f8/0x348 [ioatdma] Signed-off-by: Shuah Khan <shuah.khan@hp.com> CC: <stable@vger.kernel.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.