| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull MIPS updates from Ralf Baechle:
"The MIPS bits for 3.8. This also includes a bunch fixes that were
sitting in the linux-mips.org git tree for a long time. This pull
request contains updates to several OCTEON drivers and the board
support code for BCM47XX, BCM63XX, XLP, XLR, XLS, lantiq, Loongson1B,
updates to the SSB bus support, MIPS kexec code and adds support for
kdump.
When pulling this, there are two expected merge conflicts in
include/linux/bcma/bcma_driver_chipcommon.h which are trivial to
resolve, just remove the conflict markers and keep both alternatives."
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (90 commits)
MIPS: PMC-Sierra Yosemite: Remove support.
VIDEO: Newport Fix console crashes
MIPS: wrppmc: Fix build of PCI code.
MIPS: IP22/IP28: Fix build of EISA code.
MIPS: RB532: Fix build of prom code.
MIPS: PowerTV: Fix build.
MIPS: IP27: Correct fucked grammar in ops-bridge.c
MIPS: Highmem: Fix build error if CONFIG_DEBUG_HIGHMEM is disabled
MIPS: Fix potencial corruption
MIPS: Fix for warning from FPU emulation code
MIPS: Handle COP3 Unusable exception as COP1X for FP emulation
MIPS: Fix poweroff failure when HOTPLUG_CPU configured.
MIPS: MT: Fix build with CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
MIPS: Remove unused smvp.h
MIPS/EDAC: Improve OCTEON EDAC support.
MIPS: OCTEON: Add definitions for OCTEON memory contoller registers.
MIPS: OCTEON: Add OCTEON family definitions to octeon-model.h
ata: pata_octeon_cf: Use correct byte order for DMA in when built little-endian.
MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.
MIPS: Remove usage of CEVT_R4K_LIB config option.
...
|
|
Some initialization errors are reported with the existing OCTEON EDAC
support patch. Also some parts have more than one memory controller.
Fix the errors and add multiple controllers if present.
Signed-off-by: David Daney <david.daney@cavium.com>
|
|
Drivers for EDAC on Cavium. Supported subsystems are:
o CPU primary caches. These are parity protected only, so only error
reporting.
o Second level cache - ECC protected, provides SECDED.
o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will
will only initialize if ECC is enabled on a system so is safe to run on
non-ECC memory.
o PCI: Parity error reporting
Since it is very hard to test this sort of code the implementation is very
conservative and uses polling where possible for now.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
Pull EDAC fixes from Borislav Petkov:
- EDAC core error path fix, from Denis Kirjanov.
- Generalization of AMD MCE bank names and some minor error reporting
improvements.
- EDAC core cleanups and simplifications, from Wei Yongjun.
- amd64_edac fixes for sysfs-reported values, from Josh Hunt.
- some heavy amd64_edac error reporting path shaving, leading to
removing a bunch of code.
- amd64_edac error injection method improvements.
- EDAC core cleanups and fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (24 commits)
EDAC, pci_sysfs: Use for_each_pci_dev to simplify the code
EDAC: Handle error path in edac_mc_sysfs_init() properly
MCE, AMD: Dump error status
MCE, AMD: Report decoded error type first
MCE, AMD: Dump CPU f/m/s triple with the error
MCE, AMD: Remove functional unit references
EDAC: Convert to use simple_open()
EDAC, Calxeda highbank: Convert to use simple_open()
EDAC: Fix mc size reported in sysfs
EDAC: Fix csrow size reported in sysfs
EDAC: Pass mci parent
EDAC: Add memory controller flags
amd64_edac: Fix csrows size and pages computation
amd64_edac: Use DBAM_DIMM macro
amd64_edac: Fix K8 chip select reporting
amd64_edac: Reorganize error reporting path
amd64_edac: Do not check whether error address is valid
amd64_edac: Improve error injection
amd64_edac: Cleanup error injection code
amd64_edac: Small fixlets and cleanups
...
|
|
Use for_each_pci_dev to simplify the code.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
[Boris: cleanup comments and drop loop brackets]
Signed-off-by: Borislav Petkov <bp@alien8.de>
|
|
Pull EDAC fixes from Mauro Carvalho Chehab:
"One EDAC core fix, and a few driver fixes (i7300, i9275x, i7core)."
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
i7core_edac: fix panic when accessing sysfs files
i7300_edac: Fix error flag testing
edac: Fix the dimm filling for csrows-based layouts
i82975x_edac: Fix dimm label initialization
|
|
Make sure proper deregistration happens on all error paths in
edac_mc_sysfs_init.
Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
[ Boris: cleanup and concretize commit message ]
Signed-off-by: Borislav Petkov <bp@alien8.de>
|
|
Dump error status after decoding the error which describes the error
disposition.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
Instead of starting with the error details, report the decoded, readable
error type first.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
It is very useful to have the family/model/stepping with the reported
error so dump it. This saves us asking the bug reporter about it.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
Having the functional unit names in each bank decode is only misleading
as this code supports multiple families and there's no guarantee the
mapping between FUs and MCE banks will stay the same.
And also, knowing the functional unit name doesn't help much since you
end up looking at the respective BKDG anyway.
So drop all FU references and use the MC bank numbers instead.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
This removes an open coded simple_open() function and replaces file
operations references to the function with simple_open() instead.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
This removes an open coded simple_open() function and replaces file
operations references to the function with simple_open() instead.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
This is the complement to previous commit "EDAC: Fix csrow size
reported in sysfs". This fixes the memory controller size reporting on
csrow-based memory controllers. The csrow size is already combined for
both channels. Without this patch memory size is reported doubled.
Signed-off-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
On csrow-based memory controllers, we combine the csrow size from both
channels and there's no need to do that again in csrow_size_show which
leads to double the size of a csrow.
Fix it.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
Initialize the mem_ctl_info descriptor of a csrow properly.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
The first flag is ->csbased and will be used in common EDAC code later.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
Make sure code pays attention to K8 having only one DCT, reformat and
cleanup code, correct debug messages, remove unused code.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
Instead of open-coding it, use the DBAM_DIMM macro in
amd64_csrow_nr_pages() which we have already.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
This basically reverts 603adaf6b3e3 ("amd64_edac: fix K8 chip select
reporting") because it was a clumsy workaround for DIMM sizes reporting
on K8 which got superceded by a much more correct one with 41d8bfaba70
("amd64_edac: Improve DRAM address mapping") without removing the prior
one. Remove it now finally.
Reported-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
Rewrite CE/UE paths so that they use the same code and drop additional
code duplication in handle_ue. Add a struct err_info which collects
required info for the error reporting. This, in turn, helps slimming all
edac_mc_handle_error() calls down to one.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
All families report a valid error address when encountering a DRAM ECC
error so no need to check it.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
When injecting DRAM ECC errors over the F3xB[8,C] interface, the machine
does this by injecting the error in the next non-cached access. This
takes relatively long time on a normal system so that in order for us to
expedite it, we disable the caches around the injection.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
Invert kstrtoul return value testing and win one indentation level.
Also, shorten up macro names so that the lines can fit into 80 cols. No
functional change.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
amd64_get_dram_hole_info: remove local variable 'base'.
sys_addr_to_dram_addr: do not clear local variable 'ret'. Also, sanitize
constants formatting.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
A reported error could look like this
[ 226.178315] EDAC MC0: 1 CE on mc#0csrow#0channel#0 (csrow:0 channel:0 page:0x427c0d offset:0xde0 grain:0 syndrome:0x1c6)
with two spaces back-to-back due to the msg argument of
edac_mc_handle_error being passed on empty by the specific drivers.
Handle that.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
The tracepoint decodes the error type later anyway so remove a useless
assignment to the temporary p which gets overwritten later anyway.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
Only levels [0:4] are allowed so enforce that. Also, while at it,
massage Kconfig text and add valid debug levels range to the module
parameter description.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
Currently, we unconditionally enable PCI polling and we don't look at
the edac_op_state module parameter. Make this dependent on the parameter
setting supplied on the command line.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
The i7core_edac addrmatch_dev and chancounts_dev have sysfs files
associated with them. The sysfs files, however, are coded so that the
parent device is is the mci device. This is incorrect and the mci struct
should be obtained through the addrmatch_dev and chancounts_dev device's
private data field which is populated in i7core_create_sysfs_devices().
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
My @amd.com address will be invalid soon so move to private
email address.
Signed-off-by: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1351532410-4887-2-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
* Right-shift the values in GET_FBD_FAT_IDX and GET_FBD_NF_IDX, so
that the callers get the result they expect.
* Fix definition of FERR_FAT_FBD_ERR_MASK.
* Call GET_FBD_NF_IDX, not GET_FBD_FAT_IDX, when operating on
register FERR_NF_FBD. We were lucky they have the same definition.
This fixes kernel bug #44131:
https://bugzilla.kernel.org/show_bug.cgi?id=44131
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
The driver is currently filling data in a wrong way, on drivers
for csrows-based memory controller, when the first layer is a
csrow.
This is not easily to notice, as, in general, memories are
filed in dual, interleaved, symetric mode, as very few memory
controllers support asymetric modes.
While digging into a bug for i82795_edac driver, the asymetric
mode there is now working, allowing us to fill the machine with
4x1GB ranks at channel 0, and 2x512GB at channel 1:
Channel 0 ranks:
EDAC DEBUG: i82975x_init_csrows: DIMM A0: from page 0x00000000 to 0x0003ffff (size: 0x00040000 pages)
EDAC DEBUG: i82975x_init_csrows: DIMM A1: from page 0x00040000 to 0x0007ffff (size: 0x00040000 pages)
EDAC DEBUG: i82975x_init_csrows: DIMM A2: from page 0x00080000 to 0x000bffff (size: 0x00040000 pages)
EDAC DEBUG: i82975x_init_csrows: DIMM A3: from page 0x000c0000 to 0x000fffff (size: 0x00040000 pages)
Channel 1 ranks:
EDAC DEBUG: i82975x_init_csrows: DIMM B0: from page 0x00100000 to 0x0011ffff (size: 0x00020000 pages)
EDAC DEBUG: i82975x_init_csrows: DIMM B1: from page 0x00120000 to 0x0013ffff (size: 0x00020000 pages)
Instead of properly showing the memories as such, before this patch, it
shows the memory layout as:
+-----------------------------------+
| mc0 |
| csrow0 | csrow1 | csrow2 |
----------+-----------------------------------+
channel1: | 1024 MB | 1024 MB | 512 MB |
channel0: | 1024 MB | 1024 MB | 512 MB |
----------+-----------------------------------+
as if both channels were symetric, grouping the DIMMs on a wrong
layout.
After this patch, the memory is correctly represented.
So, for csrows at layers[0], it shows:
+-----------------------------------------------+
| mc0 |
| csrow0 | csrow1 | csrow2 | csrow3 |
----------+-----------------------------------------------+
channel1: | 512 MB | 512 MB | 0 MB | 0 MB |
channel0: | 1024 MB | 1024 MB | 1024 MB | 1024 MB |
----------+-----------------------------------------------+
For csrows at layers[1], it shows:
+-----------------------+
| mc0 |
| channel0 | channel1 |
--------+-----------------------+
csrow3: | 1024 MB | 0 MB |
csrow2: | 1024 MB | 0 MB |
--------+-----------------------+
csrow1: | 1024 MB | 512 MB |
csrow0: | 1024 MB | 512 MB |
--------+-----------------------+
So, no matter of what comes first, the information between
channel and csrow will be properly represented.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
The driver has only 4 hardcoded labels, but allows much more memory.
Fix it by removing the hardcoded logic, using snprintf() instead.
[ 19.833972] general protection fault: 0000 [#1] SMP
[ 19.837733] Modules linked in: i82975x_edac(+) edac_core firewire_ohci firewire_core crc_itu_t nouveau mxm_wmi wmi video i2c_algo_bit drm_kms_helper ttm drm i2c_core
[ 19.837733] CPU 0
[ 19.837733] Pid: 390, comm: udevd Not tainted 3.6.1-1.fc17.x86_64.debug #1 Dell Inc. Precision WorkStation 390 /0MY510
[ 19.837733] RIP: 0010:[<ffffffff813463a8>] [<ffffffff813463a8>] strncpy+0x18/0x30
[ 19.837733] RSP: 0018:ffff880078535b68 EFLAGS: 00010202
[ 19.837733] RAX: ffff880069fa9708 RBX: ffff880078588000 RCX: ffff880069fa9708
[ 19.837733] RDX: 000000000000001f RSI: 5f706f5f63616465 RDI: ffff880069fa9708
[ 19.837733] RBP: ffff880078535b68 R08: ffff880069fa9727 R09: 000000000000fffe
[ 19.837733] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003
[ 19.837733] R13: 0000000000000000 R14: ffff880069fa9290 R15: ffff880079624a80
[ 19.837733] FS: 00007f3de01ee840(0000) GS:ffff88007c400000(0000) knlGS:0000000000000000
[ 19.837733] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 19.837733] CR2: 00007f3de00b9000 CR3: 0000000078dbc000 CR4: 00000000000007f0
[ 19.837733] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 19.837733] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 19.837733] Process udevd (pid: 390, threadinfo ffff880078534000, task ffff880079642450)
[ 19.837733] Stack:
[ 19.837733] ffff880078535c18 ffffffffa017c6b8 00040000816d627f ffff880079624a88
[ 19.837733] ffffc90004cd6000 ffff880079624520 ffff88007ac21148 0000000000000000
[ 19.837733] 0000000000000000 0004000000000000 feda000078535bc8 ffffffff810d696d
[ 19.837733] Call Trace:
[ 19.837733] [<ffffffffa017c6b8>] i82975x_init_one+0x2e6/0x3e6 [i82975x_edac]
...
Fix bug reported at:
https://bugzilla.redhat.com/show_bug.cgi?id=848149
And, very likely:
https://bbs.archlinux.org/viewtopic.php?id=148033
https://bugzilla.kernel.org/show_bug.cgi?id=47171
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
If none of the elements in scrubrates[] matches, this loop will cause
__amd64_set_scrub_rate() to incorrectly use the n+1th element.
As the function is designed to use the final scrubrates[] element in the
case of no match, we can fix this bug by simply terminating the array
search at the n-1th element.
Boris: this code is fragile anyway, see here why:
http://marc.info/?l=linux-kernel&m=135102834131236&w=2
It will be rewritten more robustly soonish.
Reported-by: Denis Kirjanov <kirjanov@gmail.com>
Cc: stable@vger.kernel.org
Cc: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
Pull powerpc updates from Benjamin Herrenschmidt:
"Some highlights in addition to the usual batch of fixes:
- 64TB address space support for 64-bit processes by Aneesh Kumar
- Gavin Shan did a major cleanup & re-organization of our EEH support
code (IBM fancy PCI error handling & recovery infrastructure) which
paves the way for supporting different platform backends, along
with some rework of the PCIe code for the PowerNV platform in order
to remove home made resource allocations and instead use the
generic code (which is possible after some small improvements to it
done by Gavin).
- Uprobes support by Ananth N Mavinakayanahalli
- A pile of embedded updates from Freescale folks, including new SoC
and board supports, more KVM stuff including preparing for 64-bit
BookE KVM support, ePAPR 1.1 updates, etc..."
Fixup trivial conflicts in drivers/scsi/ipr.c
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits)
powerpc/iommu: Fix multiple issues with IOMMU pools code
powerpc: Fix VMX fix for memcpy case
driver/mtd:IFC NAND:Initialise internal SRAM before any write
powerpc/fsl-pci: use 'Header Type' to identify PCIE mode
powerpc/eeh: Don't release eeh_mutex in eeh_phb_pe_get
powerpc: Remove tlb batching hack for nighthawk
powerpc: Set paca->data_offset = 0 for boot cpu
powerpc/perf: Sample only if SIAR-Valid bit is set in P7+
powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabled
powerpc/mpc85xx: Update interrupt handling for IFC controller
powerpc/85xx: Enable USB support in p1023rds_defconfig
powerpc/smp: Do not disable IPI interrupts during suspend
powerpc/eeh: Fix crash on converting OF node to edev
powerpc/eeh: Lock module while handling EEH event
powerpc/kprobe: Don't emulate store when kprobe stwu r1
powerpc/kprobe: Complete kprobe and migrate exception frame
powerpc/kprobe: Introduce a new thread flag
powerpc: Remove unused __get_user64() and __put_user64()
powerpc/eeh: Global mutex to protect PE tree
powerpc/eeh: Remove EEH PE for normal PCI hotplug
...
|
|
Pull workqueue changes from Tejun Heo:
"This is workqueue updates for v3.7-rc1. A lot of activities this
round including considerable API and behavior cleanups.
* delayed_work combines a timer and a work item. The handling of the
timer part has always been a bit clunky leading to confusing
cancelation API with weird corner-case behaviors. delayed_work is
updated to use new IRQ safe timer and cancelation now works as
expected.
* Another deficiency of delayed_work was lack of the counterpart of
mod_timer() which led to cancel+queue combinations or open-coded
timer+work usages. mod_delayed_work[_on]() are added.
These two delayed_work changes make delayed_work provide interface
and behave like timer which is executed with process context.
* A work item could be executed concurrently on multiple CPUs, which
is rather unintuitive and made flush_work() behavior confusing and
half-broken under certain circumstances. This problem doesn't
exist for non-reentrant workqueues. While non-reentrancy check
isn't free, the overhead is incurred only when a work item bounces
across different CPUs and even in simulated pathological scenario
the overhead isn't too high.
All workqueues are made non-reentrant. This removes the
distinction between flush_[delayed_]work() and
flush_[delayed_]_work_sync(). The former is now as strong as the
latter and the specified work item is guaranteed to have finished
execution of any previous queueing on return.
* In addition to the various bug fixes, Lai redid and simplified CPU
hotplug handling significantly.
* Joonsoo introduced system_highpri_wq and used it during CPU
hotplug.
There are two merge commits - one to pull in IRQ safe timer from
tip/timers/core and the other to pull in CPU hotplug fixes from
wq/for-3.6-fixes as Lai's hotplug restructuring depended on them."
Fixed a number of trivial conflicts, but the more interesting conflicts
were silent ones where the deprecated interfaces had been used by new
code in the merge window, and thus didn't cause any real data conflicts.
Tejun pointed out a few of them, I fixed a couple more.
* 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits)
workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending()
workqueue: use cwq_set_max_active() helper for workqueue_set_max_active()
workqueue: introduce cwq_set_max_active() helper for thaw_workqueues()
workqueue: remove @delayed from cwq_dec_nr_in_flight()
workqueue: fix possible stall on try_to_grab_pending() of a delayed work item
workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback()
workqueue: use __cpuinit instead of __devinit for cpu callbacks
workqueue: rename manager_mutex to assoc_mutex
workqueue: WORKER_REBIND is no longer necessary for idle rebinding
workqueue: WORKER_REBIND is no longer necessary for busy rebinding
workqueue: reimplement idle worker rebinding
workqueue: deprecate __cancel_delayed_work()
workqueue: reimplement cancel_delayed_work() using try_to_grab_pending()
workqueue: use mod_delayed_work() instead of __cancel + queue
workqueue: use irqsafe timer for delayed_work
workqueue: clean up delayed_work initializers and add missing one
workqueue: make deferrable delayed_work initializer names consistent
workqueue: cosmetic whitespace updates for macro definitions
workqueue: deprecate system_nrt[_freezable]_wq
workqueue: deprecate flush[_delayed]_work_sync()
...
|
|
Sandy bridge EDAC is calculating the memory size with overflow.
Basically, the size field and the integer calculation is using 32 bits.
More bits are needed, when the DIMM memories have high density.
The net result is that memories are improperly reported there, when
high-density DIMMs are used:
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 0, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 1, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
As the number of pages value is handled at the EDAC core as unsigned
ints, the driver shows the 16 GB memories at sysfs interface as 16760832
MB! The fix is simple: calculate the number of pages as unsigned 64-bits
integer.
After the patch, the memory size (16 GB) is properly detected:
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 0, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 1, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
When 2R memories are found, the memory size should be multiplied
by two, otherwise, it will report half of the memory size:
+-----------------------------------------------+
| mc0 |
| branch0 | branch1 |
| channel0 | channel1 | channel0 | channel1 |
-------+-----------------------------------------------+
slot3: | 0 MB | 0 MB | 0 MB | 0 MB |
slot2: | 0 MB | 0 MB | 0 MB | 0 MB |
-------+-----------------------------------------------+
slot1: | 0 MB | 0 MB | 0 MB | 0 MB |
slot0: | 1024 MB | 1024 MB | 1024 MB | 1024 MB |
-------+-----------------------------------------------+
(the above machine have 4 x 2GB 2R memories)
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
commit a895bf8b1e1ea4c032a8fa8a09475a2ce09fe77a incorrectly
changed the logic that fills the memory bank size. Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Fix potential NULL pointer dereference in edac_unregister_sysfs() on
system boot introduced in 3.6-rc1.
Since commit 7a623c039 ("edac: rewrite the sysfs code to use struct
device") edac_mc_alloc() no longer initializes embedded kobjects in
struct mem_ctl_info. Therefore edac_mc_free() can no longer simply
decrement a kobject reference count to free the allocated memory unless
the memory controller driver module had also called edac_mc_add_mc().
Now edac_mc_free() will check if the newly embedded struct device has
been registered with sysfs before using either the standard device
release functions or freeing the data structures itself with logic
pulled out of the error path of edac_mc_alloc().
The BUG this patch resolves for me:
BUG: unable to handle kernel NULL pointer dereference at (null)
EIP is at __wake_up_common+0x1a/0x6a
Process modprobe (pid: 933, ti=f3dc6000 task=f3db9520 task.ti=f3dc6000)
Call Trace:
complete_all+0x3f/0x50
device_pm_remove+0x23/0xa2
device_del+0x34/0x142
edac_unregister_sysfs+0x3b/0x5c [edac_core]
edac_mc_free+0x29/0x2f [edac_core]
e7xxx_probe1+0x268/0x311 [e7xxx_edac]
e7xxx_init_one+0x56/0x61 [e7xxx_edac]
local_pci_probe+0x13/0x15
...
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
coccinelle warns about:
+ drivers/edac/edac_mc.c:429:9-23: ERROR: reference preceded by free on line 429
421 if (mci->csrows) {
> 422 for (chn = 0; chn < tot_channels; chn++) {
423 csr = mci->csrows[chn];
424 if (csr) {
> 425 for (chn = 0; chn < tot_channels; chn++)
426 kfree(csr->channels[chn]);
427 kfree(csr);
428 }
> 429 kfree(mci->csrows[i]);
430 }
431 kfree(mci->csrows);
432 }
and that code block seem to mess things up in several ways (double free, memory
leak, out-of-bound reads etc.):
L422: The iterator "chn" and bound "tot_channels" are totally wrong. Should be
"row" and "tot_csrows" respectively. Which means either memory leak, or
out-of-bound reads (which if does not trigger an immediate page fault
error, will further lead to kfree() on random addresses).
L425: The inner loop is reusing the same iterator "chn" as the outer loop,
which could lead to premature end of the outer loop, and hence memory leak.
L429: The array index 'i' in mci->csrows[i] is a temporary value used in
previous loops, and won't change at all in the current loop. Which
means either out-of-bound read and possibly kfree(random number), or the
same mci->csrows[i] get freed once and again, and possibly double free
for the kfree(csr) in L427.
L426/L427: a kfree(csr->channels) is needed in between to avoid leaking the memory.
The buggy code was introduced by commit de3910eb ("edac: change the mem
allocation scheme to make Documentation/kobject.txt happy") in the 3.6-rc1
merge window. Fix it by freeing up resources in this order:
free csrows[i]->channels[j]
free csrows[i]->channels
free csrows[i]
free csrows
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
CC: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We unified the Freescale pci/pcie initialization by changing the fsl_pci
to a platform driver. In previous PCI code architecture the initialization
routine is called at board_setup_arch stage. Now the initialization is done
in probe function which is architectural better. Also It's convenient for
adding PM support for PCI controller in later patch.
Now we registered pci controllers as platform devices. So we combine two
initialization code as one platform driver.
Signed-off-by: Jia Hongtao <B38951@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
Convert delayed_work users doing cancel_delayed_work() followed by
queue_delayed_work() to mod_delayed_work().
Most conversions are straight-forward. Ones worth mentioning are,
* drivers/edac/edac_mc.c: edac_mc_workq_setup() converted to always
use mod_delayed_work() and cancel loop in
edac_mc_reset_delay_period() is dropped.
* drivers/platform/x86/thinkpad_acpi.c: No need to remember whether
watchdog is active or not. @fan_watchdog_active and related code
dropped.
* drivers/power/charger-manager.c: Seemingly a lot of
delayed_work_pending() abuse going on here.
[delayed_]work_pending() are unsynchronized and racy when used like
this. I converted one instance in fullbatt_handler(). Please
conver the rest so that it invokes workqueue APIs for the intended
target state rather than trying to game work item pending state
transitions. e.g. if timer should be modified - call
mod_delayed_work(), canceled - call cancel_delayed_work[_sync]().
* drivers/thermal/thermal_sys.c: thermal_zone_device_set_polling()
simplified. Note that round_jiffies() calls in this function are
meaningless. round_jiffies() work on absolute jiffies not delta
delay used by delayed_work.
v2: Tomi pointed out that __cancel_delayed_work() users can't be
safely converted to mod_delayed_work(). They could be calling it
from irq context and if that happens while delayed_work_timer_fn()
is running, it could deadlock. __cancel_delayed_work() users are
dropped.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Roland Dreier <roland@kernel.org>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
|
|
* devel: (33 commits)
edac i5000, i5400: fix pointer math in i5000_get_mc_regs()
edac: allow specifying the error count with fake_inject
edac: add support for Calxeda highbank L2 cache ecc
edac: add support for Calxeda highbank memory controller
edac: create top-level debugfs directory
sb_edac: properly handle error count
i7core_edac: properly handle error count
edac: edac_mc_handle_error(): add an error_count parameter
edac: remove arch-specific parameter for the error handler
amd64_edac: Don't pass driver name as an error parameter
edac_mc: check for allocation failure in edac_mc_alloc()
edac: Increase version to 3.0.0
edac_mc: Cleanup per-dimm_info debug messages
edac: Convert debugfX to edac_dbg(X,
edac: Use more normal debugging macro style
edac: Don't add __func__ or __FILE__ for debugf[0-9] msgs
Edac: Add ABI Documentation for the new device nodes
edac: move documentation ABI to ABI/testing/sysfs-devices-edac
i7core_edac: change the mem allocation scheme to make Documentation/kobject.txt happy
edac: change the mem allocation scheme to make Documentation/kobject.txt happy
...
|
|
"pvt->ambase" is a u64 datatype. The intent here is to fill the first
half in the first call to pci_read_config_dword() and the other half in
the second. Unfortunately the pointer math is wrong so we set the wrong
data.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
In order to test if the error counters are properly incremented,
add a way to specify how many errors were generated by a trace.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Add support for L2 ECC on Calxeda highbank platform.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Add support for memory controller on Calxeda Highbank platforms. Highbank
platforms support a single 4GB mini-DIMM with 1-bit correction and 2-bit
detection.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Create a single, top-level "edac" directory for debugfs. An "mc[0-N]"
directory is then created for each memory controller. Individual drivers
can create additional entries such as h/w error injection control.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
Linus Torvalds
David Daney
Ralf Baechle
Wei Yongjun
Denis Kirjanov
Borislav Petkov
Josh Hunt
Prarit Bhargava
Borislav Petkov
Jean Delvare
Mauro Carvalho Chehab
Andrew Morton
Shaun Ruffell
Fengguang Wu
Jia Hongtao
Tejun Heo
Dan Carpenter
Rob Herring