aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/firewire/fw-ohci.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2007-12-10firewire: OHCI 1.0 Isochronous Receive supportJarod Wilson1-20/+155
Third rendition of FireWire OHCI 1.0 Isochronous Receive support, using a zer-copy method similar to OHCI 1.1 which puts the IR data payload directly into the userspace buffer. The zero-copy implementation eliminates the video artifacts, audio popping, and buffer underrun problems seen with version 1 of this patch, as well as fixing a regression in OHCI 1.1 support introduced by version 2 of this patch. Successfully tested in OHCI 1.1 mode on the following chipsets: - NEC uPD72847 (rev 01), OHCI 1.1 (PCI) - Ti XIO2200(A) (rev 01), OHCI 1.1 (PCIe) - Ti TSB41AB2 (rev 01), OHCI 1.1 (PCI on SB Audigy) - Apple UniNorth 2 (rev 81), OHCI 1.1 (PowerBook G4 onboard) Successfully tested in OHCI 1.0 mode on the following chipsets: - Agere FW323 (rev 06), OHCI 1.0 (Mac Mini onboard) - Agere FW323 (rev 06), OHCI 1.0 (PCI) - Via VT6306 (rev 46), OHCI 1.0 (PCI) - NEC OrangeLink (rev 01), OHCI 1.0 (PCI) - NEC uPD72847 (rev 01), OHCI 1.1 (PCI) - Ti XIO2200(A) (rev 01), OHCI 1.1 (PCIe) The bulk of testing was done in an x86_64 system, but was also successfully sanity-tested on other systems, including a PPC(32) PowerBook G4 and an i686 EPIA M10k. Crude benchmarking (watching top during capture) puts the cpu utilization during capture on the EPIA's 1GHz Via C3 processor around 13%, which is down from 30% with the v1 code. Some implementation details: To maintain the same userspace API as dual-buffer mode, we set up two descriptors for every incoming packet. The first is an INPUT_MORE descriptor, pointing to a buffer large enough to hold just the packet's iso headers, immediately followed by an INPUT_LAST descriptor, pointing to a chunk of the userspace buffer big enough for the packet's data payload. With this setup, each incoming packet fills in these two descriptors in a manner that very closely emulates dual-buffer receive, to the point where the bulk of the handle_ir_* code is now identical between the two (and probably primed for some restructuring to share code between them). The only caveat I have at the moment is that neither of my OHCI 1.0 Via VT6307-based FireWire controllers work particularly well with this code for reasons I have yet to figure out. Signed-off-by: Jarod Wilson <jwilson@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-31firewire: Fix pci resume to not pass in a __be32 config rom.Kristian Høgsberg1-12/+25
The ohci_enable() function shared between pci_probe and pci_resume takes a host endian config rom, but ohci->config_rom is __be32. This sets up the config rom in the wrong endian on little endian machine, specifically, BusOptions will be initialized to a 0 max receive size. This patch changes the way we reuse the config rom so that we avoid this problem. Signed-off-by: Kristian Hoegsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-22firewire: fw-ohci: shut up a superfluous compiler warningStefan Richter1-1/+1
New warning since commit ab88ca488b8af66c3defa165874e81e695319a19, "firewire: fw-ohci: missing dma_unmap_single": drivers/firewire/fw-ohci.c: In function 'at_context_transmit': drivers/firewire/fw-ohci.c:609: warning: 'payload_bus' may be used uninitialized in this function Access to payload_bus is conditional on packet->payload_length > 0, and that won't change while in at_context_queue_packet. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-22firewire: fw-ohci: log a note about unsupported featuresStefan Richter1-3/+8
because there seems to be more time needed to implement this. Also, change related error return values to more appropriate ones. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-17firewire: fw-ohci: check for misconfigured bus (phyID == 63)Stefan Richter1-2/+7
Check NodeID.nodeNumber as per OHCI 1.1 clause 7.2.3.2. See also IEEE 1394a table 5B-1. Also, demote the "node ID not valid" message from error to notification as it is not an error condition. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-17firewire: fw-ohci: missing dma_unmap_singleStefan Richter1-0/+3
at_context_queue_packet() didn't clean up in an early exit path. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2007-10-17firewire: fw-ohci: log posted write errorsStefan Richter1-2/+6
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-17firewire: fw-ohci: reorder includesStefan Richter1-6/+6
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-17firewire: fw-ohci: fix includesStefan Richter1-3/+3
Add used includes, remove unused includes. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-17firewire: fw-ohci: enforce read order for selfID generationStefan Richter1-0/+3
It seems unlikely, but access to self_id_cpu[0] could at least in theory be deferred until after the loop over self_id_cpu[1..n] or even after the subsequent reg_read. Enforce the desired order by a read barrier. Also prevent the reg_read from being reordered relative to the for loop. This isn't necessary if the loop's conditional printk counts as an implicit barrier, but better make it explicit. (self_id_cpu[] is a coherent DMA buffer.) Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-09-07firewire: fw-ohci: ignore failure of pci_set_power_state (fix suspend regression)Stefan Richter1-4/+2
Fixes (papers over) "Sleep problems with kernels >= 2.6.21 on powerpc", http://lkml.org/lkml/2007/8/25/155. The issue is that the FireWire controller's pci_dev.current_state of iBook G3 and presumably older PowerBooks is still in PCI_UNKNOWN instead of PCI_D0 when the firewire driver's .suspend method is called. Like it was suggested earlier in http://lkml.org/lkml/2006/10/24/13, we do not fail .suspend anymore if pci_set_power_state failed. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-08-02firewire: fw-ohci: dma_free_coherent needs IRQs enabledStefan Richter1-7/+13
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-18firewire: fw-ohci: fix "scheduling while atomic"Stefan Richter1-1/+1
context_stop is called by bus_reset_tasklet, among else. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-18firewire: fw-ohci: flush MMIO write before msleepStefan Richter1-0/+1
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-10firewire: missing newline in printkStefan Richter1-3/+3
Also remove some errno printouts which will be shown by infrastructure code anyway. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-06-29firewire: fix async reception on big endian machinesStefan Richter1-3/+3
descriptor.data_address is little endian Tested-by: Olaf Hering <olh@suse.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2007-06-16firewire: fix hang after card ejectionStefan Richter1-1/+1
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2007-05-31firewire: Implement suspend/resume PCI driver hooks.Kristian Høgsberg1-64/+123
It's a low-impact design, that just makes suspend/resume look like a bus reset to the upper level drivers, but it should be sufficient. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-05-27firewire: Add missing byteswapping for receive DMA programs.Kristian Høgsberg1-2/+3
Signed-off-by: Kristian Hoegsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-05-15missing mm.h in fw-ohciAl Viro1-0/+1
need it for page_private(), not all targets have it pulled indirectly Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10firewire: Convert OHCI driver to use standard goto unwinding for error handling.Kristian Høgsberg1-44/+42
Signed-off-by: Kristian Hoegsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-05-10firewire: Always use parens with sizeof.Kristian Høgsberg1-14/+14
Signed-off-by: Kristian Hoegsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-05-10firewire: Provide module aliase for backwards compatibility.Olaf Hering1-0/+5
This patch loads fw-sbp2 if sbp2 is still in the config file. So one can go back and forth between releases without worry about the root filesystem drivers. Signed-off-by: Kristian Hoegsberg <krh@redhat.com> Existing mkinitrd scripts still have to be adapted, unless they grok module aliases. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-05-10firewire: Uppercase most macro names.Kristian Høgsberg1-74/+74
Signed-off-by: Kristian Hoegsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-05-10firewire: Clean up comment style.Kristian Høgsberg1-50/+94
Drop filenames from file preamble, drop editor annotations and use standard indent style for block comments. Signed-off-by: Kristian Hoegsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (fixed typo)
2007-04-12firewire: Check for CONTEXT_RUN not CONTEXT_ACTIVE when starting AT DMA context.Kristian Høgsberg1-1/+1
Doh, bad typo... Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-04-12firewire: Byteswap iso header so all headers are presented as be32.Kristian Høgsberg1-1/+7
Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-03-28firewire: Fix start on cycle 0 for IT, implement start on cycle for IR.Kristian Høgsberg1-9/+13
Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-03-28firewire: Remember to set the driver_data pointer when queueing a packet.Kristian Høgsberg1-0/+1
Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-03-15firewire: Move sync and tag parameters to start_iso ioctl.Kristian Høgsberg1-5/+4
Setting these at create_context time or start_iso time doesn't matter much, but raw1394 sets them at start_iso time so that will be easier to emulate this way. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-03-15firewire: Fix dualbuffer iso receive mode and drop buffer fill mode.Kristian Høgsberg1-114/+46
The dualbuffer DMA setup did not account for the iso trailer word and thus didn't work correctly. With this fixed we can drop the dual buffer fallback mode. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-03-09firewire: Implement CSR cycle time and bus time registers.Kristian Høgsberg1-2/+24
Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-03-09firewire: Implement topology map and fix a couple of loopback bugs.Kristian Høgsberg1-2/+9
Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-03-09firewire: Move async transmit to use the general context code.Kristian Høgsberg1-212/+148
The old async transmit context handling was starting and stopping DMA for every packet transmission. This could cause silently failing packet transmission, if the DMA was reprogrammed too close to being stopped. The general context code keeps DMA running at all times and fixes this problem. It's also a nice cleanup. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-03-09firewire: Clear all interrupt bits before shutting down.Kristian Høgsberg1-1/+2
Some flaky controllers doesn't honor the masterIntEnable bits and can generate bus reset events even if that bit is cleared. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-03-09firewire: Scheduled removal of SA_xxx interrupt flags fixups 3Thomas Gleixner1-1/+1
The obsolete SA_xxx interrupt flags have been used despite the scheduled removal. Fixup the remaining users in -mm. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-03-09firewire: adjust whitespaceStefan Richter1-24/+22
Remove space before tab and trailing whitespace. Unify indentation of goto target labels. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-03-09firewire: Implement sync and tag matching for isochronous receive.Kristian Høgsberg1-2/+30
Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-03-09firewire: Configure channel and speed at context creation time.Kristian Høgsberg1-2/+2
We need the channel number as we queue up iso packets for transmission so we can fill out the header correctly. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-03-09firewire: Store OHCI version and make sure we have at least 1.1 before doing dualbuffer.Kristian Høgsberg1-4/+15
Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-03-09firewire: Don't touch DMA descriptors after appending.Kristian Høgsberg1-6/+6
When a DMA descriptor is appended to the context we sync it for DMA and the device might potentially read it immediately. So, we can't set the IRQ bits in the descriptor after appending. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-03-09firewire: Use a buffer fill descriptor for receive when header size is 0.Kristian Høgsberg1-15/+92
When the DMA is setup to not strip any headers, we need to use the buffer fill descriptor instead of the dual buffer, since the dual buffer descriptor must strip a non-zero number of header quadlets. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-03-09firewire: Set correct buffer lengths for dualbuffer DMA descriptor.Kristian Høgsberg1-4/+3
Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-03-09firewire: Acummulate received iso headers and send them back to user space.Kristian Høgsberg1-15/+34
Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-03-09firewire: Log OHCI chipset version in PCI probe.Kristian Høgsberg1-2/+4
Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-03-09firewire: Implement functionality to stop isochronous DMA contexts.Kristian Høgsberg1-11/+33
Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-03-09firewire: Rename 'send_iso' to 'start_iso'.Kristian Høgsberg1-2/+2
Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-03-09firewire: Implement basic isochronous receive functionality.Kristian Høgsberg1-19/+149
Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-03-09firewire: Generalize the iso transmit descriptor buffer logic.Kristian Høgsberg1-142/+218
The descriptor circular buffer logic used for iso transmission is useful for async transmit too, so pull the sharable logic out in a few standalone functions. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-03-09firewire: Split the iso buffer out from fw_iso_context and avoid vmalloc.Kristian Høgsberg1-4/+8
This patch splits out the iso buffer so we can initialize it at mmap time with the size provided in the mmap call. Furthermore, allocate the backing pages using alloc_page to avoid setting up kernel side virtual memory mappings for the pages. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.